HP HOWTOConfiguration Guide and Use of HP Products under Linux (Version v0.95) Bruno Cornec Hewlett Packard Bruno_at_HyPer-Linux.org Copyright © 1997-2003 by Bruno Cornec This document describes the use of products available in the [1]Hewlett-Packard (HP) catalog with Linux and some free software. It gives the state of the support for hardware, software to use, answers to some frequently asked questions and gives elements of sizing. The goals are to offer a general view of free software functions and their use at best with HP products; as well as to make new users of HP products rapidly operational and also to allow others to choose their products knowing facts. License This HOWTO is a free documentation thanks to Medasys and HP for whom I do that job; you may copy, redistribute and/or modify it under the terms of the [2]GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, Front-Cover Texts or Back-Cover Texts. This document is distributed hoping it will be useful, but without any guaranty; you're completely responsible of its use, and couldn't complain in case it doesn't work, or even if it breaks the hardware. All the software included in it, if not already copyrighted is released under the GPL. _________________________________________________________________ Table of Contents 1. [3]Introduction 1.1. [4]Presentation 1.1.1. [5]New versions of this document 1.1.2. [6]Suggestions and contributions 1.2. [7]Aknowledgements 2. [8]Presentation of Linux and Free Software 2.1. [9]Some definitions 2.1.1. [10]Free Software or Open Source software 2.1.2. [11]Examples and counter-examples 2.1.3. [12]Linux 2.2. [13]Free software concepts 2.2.1. [14]Free software philosophy 2.2.2. [15]The choice of free software 2.2.3. [16]Wrong ideas on free software 2.2.4. [17]Real problems around free software 2.3. [18]Linux and other operating systems 2.3.1. [19]Linux and other proprietary Unix (HP-UX, Tru64, AIX, Solaris, Irix) 2.3.2. [20]Linux and SCO/Caldera 2.3.3. [21]Linux and Windows NT/2000/XP 3. [22]Linux and HP products 3.1. [23]Informations on HP products and Linux 3.1.1. [24]General information 3.1.2. [25]Particular announces 3.2. [26]HP hardware supported by Linux 3.2.1. [27]Intel i386 based computer range 3.2.2. [28]The monitors range 3.2.3. [29]PA-Risc based computer range 3.2.4. [30]The IA-64 range 3.2.5. [31]Blade Server (Old models) 3.2.6. [32]UPS 3.2.7. [33]X Terminals 3.2.8. [34]The printing product range 3.2.9. [35]Digital imaging product range 3.2.10. [36]All-in-one range (OfficeJet) 3.2.11. [37]The Storage products range 3.3. [38]HP software and free software 3.3.1. [39]HP softwares under Linux 3.3.2. [40]Third party softwares linked to HP for Linux 3.3.3. [41]Free softwares under HP-UX 3.3.4. [42]Free softwares under MPE/IX 3.4. [43]Support of HP solutions under Linux 3.5. [44]Training on HP Linux solutions 3.6. [45]HP as an Open Source Software user and contributor 4. [46]Solutions and Sizing 4.1. [47]Linux as file and print server 4.1.1. [48]Linux as file server 4.1.2. [49]Linux as print server 4.2. [50]Internet/Intranet Linux server 4.2.1. [51]Web Server 4.2.2. [52]Mail Server 4.2.3. [53]Firewall/Proxy/Web-Cache server 4.2.4. [54]Directory server 4.3. [55]Linux as computing server 4.4. [56]Linux as an office server 5. [57]Frequently Asked Questions (FAQ) 6. [58]Customer References 7. [59]References 8. [60]Contributors 9. [61]Future versions A. [62]GNU Free Documentation License 0. [63]PREAMBLE 1. [64]APPLICABILITY AND DEFINITIONS 2. [65]VERBATIM COPYING 3. [66]COPYING IN QUANTITY 4. [67]MODIFICATIONS 5. [68]COMBINING DOCUMENTS 6. [69]COLLECTIONS OF DOCUMENTS 7. [70]AGGREGATION WITH INDEPENDENT WORKS 8. [71]TRANSLATION 9. [72]TERMINATION 10. [73]FUTURE REVISIONS OF THIS LICENSE [74]Addendum: How to use this License for your documents List of Tables 2-1. [75]Performances of Free Software 3-1. [76]Brio and Linux 3-2. [77]Vectra and Linux 3-3. [78]EVO and Linux 3-4. [79]e-PC and Linux 3-5. [80]Kayak and Linux 3-6. [81]Desktop computer accessories 3-7. [82]Visualize and Linux 3-8. [83]HP workstation and Linux 3-9. [84]Workstations accessories 3-10. [85]OmniBook and Linux 3-11. [86]Mobile computer accessories 3-12. [87]Evo and Linux 3-13. [88]Jornada and Linux 3-14. [89]iPAQ and Linux 3-15. [90]Tablet PC and Linux 3-16. [91]NetServers and Linux 3-17. [92]NetServers accessories 3-18. [93]Proliant and Linux 3-19. [94]Proliant accessories 3-20. [95]HP Monitors and Linux 3-21. [96]HP IA-64 Servers and Linux 3-22. [97]IA-64 Server accessories 3-23. [98]HP IA-64 Workstations and Linux 3-24. [99]Printer Control codes 3-25. [100]Scanners and Linux 3-26. [101]Cameras and Linux 4-1. [102]Sizing of a file server 4-2. [103]Sizing of a print server 4-3. [104]Sizing of a static Web server 4-4. [105]Sizing of a dynamic Web server 4-5. [106]Sizing of an e-mail server 4-6. [107]Sizing of a Firewall/Proxy/Web-Cache server 4-7. [108]Sizing of a LDAP server 4-8. [109]Sizing of an office server 7-1. [110]Web sites of HP 7-2. [111]Other fundamental sites on Linux and Open Source Software List of Figures 2-1. [112]Server operating system repartition in 1998 (IDC). 2-2. [113]Server operating system repartition in 1999 (IDC). 2-3. [114]Web server software by Netcraft between 1995 and 2001. 2-4. [115]Repartition of Internet servers by IOS Counter in April 1999. _________________________________________________________________ Chapter 1. Introduction 1.1. Presentation This document is a guide on the use of products proposed by the hardware manufacturer [116]Hewlett-Packard (HP) under Linux. It's a quick reference guide, covering all what you need to know to size, install and configure your products under Linux, or which complementary software will be useful for their use. Frequently Asked Questions find answers, and references are given concerning other sources of information related to HP technologies and applications. Opinions expressed here are those of the author, and don't commit both [117]Medasys or [118]Hewlett-Packard . Informations are provided in the aim to be useful to the readers. However, there can't be, through this document, any warranty of any kind either from Medasys or HP on these systems under Linux, as well as from myself. Neither Medasys, nor HP, nor the author could be responsible for any problem caused by the use of this information. However, software editors don't guarantee you a lot either (re-read the contracts). _________________________________________________________________ 1.1.1. New versions of this document New versions of this document will be announced regularly on the Usenet groups [119]news:fr.comp.os.linux.annonces and [120]news:comp.os.linux.annonces. They will also be updated on the various anonymous ftp sites which archive such information, mainly [121]ftp://ftp.ibiblio.org/pub/Linux/docs/HOWTO/. Hypertext versions of this and other Linux HOWTO are available on many web sites, including [122]http://www.linuxdoc.org/HOWTO and [123]http://www.freenix.org/unix/linux/HOWTO. Most Linux distributions on CD-ROM include the HOWTO, often under the /usr/share/doc, directory, and you can also buy printed copies from several vendors. Sometimes the HOWTO available from CD-ROM vendors, ftp sites or printed format are out of date. If the date on this HOWTO is more than 6 months in the past, then a newer copy is probably available on the Internet. The site of reference for this HOWTO is [124]http://www.hyper-linux.org/HP-HOWTO/current Old versions of this document are also available at If you make a translation of this document into another language, please let me know so that I can include a reference to it here. The following versions are currently available : [125]http://www.HyPer-Linux.org/HP-HOWTO/old * [126]French by <[127]Bruno_at_HyPer-Linux.org> * [128]English by <[129]Bruno_at_HyPer-Linux.org> * [130]Japanese by <[131]junichi_shimoda_at_hp.com> As english isn't a native language for me, I would really appreciate any correction on the english version. _________________________________________________________________ 1.1.2. Suggestions and contributions I rely on you, the reader, to make this HOWTO useful. If you have any suggestions, corrections, or congratulations :-) don't hesitate to send them to me <[132]Bruno_at_HyPer-Linux.org>, and I will try to incorporate them in a next revision. I've created a mailing-list dedicated to this document. Every person interested to contribute can register at [133]mailto:sympa@eurolinux.grenoble.hp.com?subject=subscribe%20hp-howto, I am also willing to answer general questions on HP hardware and software with Linux, as best I can. Before doing so, please read all of the information in this HOWTO, and then send me detailed information about the problem. If you publish this document on a CD-ROM or in hardcopy form, a complimentary copy would be appreciated; mail me for my postal address. Also consider making a donation to the Linux Documentation Project to help support free documentation for Linux. Contact the Linux HOWTO coordinator, Guylhem AZNAR <[134]guylhem_at_rrremovethis.oeil.qc.ca>. _________________________________________________________________ 1.2. Aknowledgements Most of the information provided here come from research made in HP documentations, files provided with Linux kernel sources, the FAQ of the Usenet newsgroup [135]news:comp.sys.hp.hpux with a [136]HTML version available on all mirror sites like the CICT, my own experience on HP products, a lot of tests and deployments realised, and remarks from Linux users as well as many HP's engineers. Numerous people have contributed to this document and augmented its contents. You'll find the most complete possible list in the [137]Chapter 8. I would like to thank just now, without any particular order, those without whom this document would simply not exist : * Marc Hia Balié <[138]Marc_Hia-Balie_at_hp.com>, who ordered that document and accepted to make it a free documentation. * [139]Linus Torvalds, for the Linux project (without it, nothing would exist). * [140]Richard Stallman, for the GNU project (without it, nothing would exist either). * Nat Makarévitch <[141]nat_at_nataa.frmug.org>, for his work as translator and his advocacy conferences. * Xavier Cazin <[142]xc_at_itp.fr>, for his talent to convince me to use DocBook. * Eric Dumas <[143]dumas_at_Linux.EU.Org>, for the management of the french LDP. * Rémy Card <[144]Remy.Card_at_linux.org>, for ext2 and his love of electricity :-) * René Cougnenc, to have helped a lot of people to begin with Linux, including myself. * Dany Coffineau <[145]Dany.Coffineau_at_alcatel.fr>, for teachnig me Unix. * François Strobel <[146]Francois.Strobel_at_alcatel.fr>, for his peacefulness and legendary patience :-) * Frédéric Dubuy <[147]F.Dubuy_at_atrid.fr>, who contributed to the writing of that document and took all the work I couldn't achieve, while I was writing it. Without saying he's also the graphist of the logo ! * Alain Pascal <[148]pascal_at_montrouge.omnes.slb.com>, for the several tests made. * Pascal Lemonnier <[149]Pascal.Lemonnier_at_medasys.fr> typography expert who found a lot of typos. * Ralf S. Engelschall <[150]rse_at_engelschall.com>, who realised the [151]wml tool set, used to manage the languages of this document. * Cees de Groot <[152]cg_at_sgmltools.org>, who realised the [153]SGMLTools used to generate the first version of this document. * Norman Walsh <[154]ndw_at_nwalsh.com>, who realised the SGML DTD [155]DocBook. which allows to generate all the versions of this document from a single SGML source. * James Clark <[156]jjc_at_jclark.com>, who realised the tool [157]Jade. * Cornec family <[158]cornec_at_victoria.frmug.org>, for his patience and his support. _________________________________________________________________ Chapter 2. Presentation of Linux and Free Software 2.1. Some definitions Before going into more details in the presentation, it could be useful to give some definitions of terms and software mentionned in that HOWTO. _________________________________________________________________ 2.1.1. Free Software or Open Source software A free software (or Open Source software) is a software distributed with its source code, allowing its study, its transmission, its adaptation. The problem, in english, is the use of free, which has both meanings of "at no cost" and "without constraint". Here, it's the second use which has to be considered, hence the use of Open Source. To remember, think of free as speech, not beer. Depending on the licenses used for its development, the constraints for users of such a software are various. The most open licenses (like the BSD one) allow code appropriation by third parties, including the resell of the resulting software (with or without modification) in commercial products, without any problem, and without owing something else to the originators than the mention of their copyright. Other licenses (like the GNU Public License or GPL) force every modified GPL software to be free GPL software itself ; this doesn't allow the use of such programs in a commercial one. Many other licenses exist, more or less open: the Artistic License (perl), the NPL one (mozilla), the QPL one (Qt) ... A vast majority of free software is today under the GPL license, even if the BSD world takes always a great place, however less visible, mainly in the press. Linux is placed under the GPL. To have more information on these definitions and the licenses, please refer to the following reference sites : [159]GNU project Web site You find there all information on the GNU project, including the licenses produced (GPL and LGPL) and various discussions on free software. [160]Open Source project Web site This site proposes a new definition, a bit less restrictive, of free software - called here OpenSource Software - by well-known people. [161]FreeBSD project Web site Here are explained the advantages of the very open BSD license. _________________________________________________________________ 2.1.2. Examples and counter-examples First of all, free software and freeware shouldn't be mixed up. A freeware is not necessarily a software provided with its sources, on the contrary of a free software. On the other side, on the contrary of a freeware, you may be charged to obtain a free software (it's not in contradiction with the license used). The ambiguity, as stated before, comes from the word "free" . A freeware is then free of charge, but not necessarily "free of sources". (As well, the shareware has nothing to do with free software). So examples of important and well-known free software are the Linux and FreeBSD operating systems, the [162]Apache Web server, the [163]SaMBa SMB server, GNU C and C++ compilers ... A contrario, examples of well-known freeware are the Internet Explorer browser, the Eudora Light mail reader, ... _________________________________________________________________ 2.1.3. Linux Linux is a free operating system, superset of the POSIX norm. "Linux" points out the kernel alone. By extension, the name is also given to distributions based on that kernel plus a set of tools from the GNU project. Linux is by consequence a Unix system, except that it doesn't use any proprietary code and is furnished under the GPL license, implying the availability of the sources. As every Unix system, Linux is multi-tasking and multi-user. It's also extremely portable, and it is available officialy today on processors such as Intel (i386 to Pentium IV and Itanium), Alpha, Motorola (680x0 and PowerPC), Sparc, StrongArm, Mips. Without mention of the ports, operational or in process on PalmPilot, superH, PA-Risc, Crusoe ... The system is today perfectly stable and mature. Versions "x.y.z" of the Linux kernel, where "y" is an even number, are stable and only bug corrections are generaly applied when "z" increases. Versions "x.y.z" of the Linux kernel, where "y" is an odd number, are development versions which may be instable and are reserved to developers or intrepids. From time to time, when the kernel development stabilizes a "freeze" is announced to furnish a new "stable" version (even), and the development goes on on a new version (odd). The current stable version is the version 2.4.21 (this last number may evolve following the rythm of corrections). Development has on the other side begun again with a 2.5 version. Numerous presentations of Linux are currently available. Among them, you should consult the one made by Michael Johnson at [164]http://www.linuxdoc.org/HOWTO/INFO-SHEET.html _________________________________________________________________ 2.1.3.1. Linux technical characteristics The system offers the following technical characteristics : * Multi-tasking : executes several programs in pseudo-parallel. * Multi-users : many users acting on the same machine at the same time (without worrying on licenses). * Portable and interoperable : works on several hardware architectures. All the sources are available. Linux supports a lot of file systems, outside the native ext2 : System V, BSD, Sun, MS-DOS, VFAT, NTFS, Mac, HPFS, EFS, ISO9660. On the network side, it supports the following protocols TCP/IP v4 and v6, Appletalk, Netware (client and server), Lan Manager SMB (client and server), X-Window, NFS, PPP, SLIP, UUCP. * Performant architecture : modular kernel, built at will, execution in protect mode on 80x86 processors, page load on demand, page share between executables when reading, virtual memory with swap on disk, use of a dynamical disk cache in memory, dynamic libraries, process management, pseudo terminals, virtual consoles. * Security : protection of memory between processes: one user program can't compromise the whole system operation. The kernel may also, on the other hand, filter network packets. * Respect of norms and standards : Posix, with System V and BSD extensions. Support of COFF and ELF binaries. Binary compatibility with SCO, SVR3/4 through the iBCS2 module. Native Language Support as well as national keyboards, fonts... _________________________________________________________________ 2.2. Free software concepts Once the definitions are given, it is important to stay on at ideas promoted by the free software movement. It's important as well to clear some wrong ideas hawked on these software. This section gives then a various set of elements in favour of the introduction of free software and ends on the real problems remaining to solve. _________________________________________________________________ 2.2.1. Free software philosophy In fact, the philosophy promoted by the free software movement is not that different from the one proposed by the scientific movement till a long time already: to put in common ideas and collective knowledge to allow the progression of the research and the growth of this knowledge. The knowledge of the human genome is one of the examples of such a collaborative work. The computer engineering environment, and especially the software one, seems to have turn away till the last 20 years from these base concepts of the scientific world. It prefers on the contrary to keep the customer captive instead of giving him the information needed to exploit his computing environment the best he can. That's indeed following such a problem at the begining of the 80's that Richard Stallman, who was doing researches in artificial intelligence at the MIT, decided to create the GNU project. This project is the foundation of the current free software movement. The main ideas promoted by this movement and stated by Richard Stallman himself are : * Liberty: every user should be free to copy, diffuse, modify a program, either to share it with others, or to adapt it to his own needs. As well, he should be able to analyse it to understand, imitate, improve, verify its operations, as well as every scientific result is published and seen by the peers for verification, study, understanding and realisation of derived works. Could you imagine a vaccine against the liver cancer that another laboratory couldn't derive to make a vaccine against the pancres cancer. Of course, the negative impact of patents at that level is obvious. * Equality: every person should have the same rights on the software. Thus the provider isn't priviledged and can't keep customers to whom he furnished his work captive. Could you think that only the producer of our vaccine could use it ? With software patents, if you don't pay, you cannot use them (think to discussions around RANT and W3C standards). * Fraternity: this mode of working encourages the whole computer engineering community to cooperate and thus to produce software more and more reliable and useful to all. Could you imagine that a discovery like the vaccine above couldn't help everyone and favour other discoveries. Again with software patents, nothing like that is possible. More over the utopy of these ideas, we can find other reasons which allowed free software to spread so widely today. They are detailed in [165]Section 2.2.2. The free software movement materializes itself also through a community of people. That community, informal meeting of personnalities, is heterogeneous in its contents, actions, ideas, even if all share the same belief in the freedom of the software. That community created for itself the tools needed to its communication : Internet and Usenet. And these communication tools are based of course on a lot of free software to work. Among the outstanding persons of this movement, we can present : * [166]Linus Torvalds, conceptor of Linux. * [167]Richard Stallman, GNU project conceptor. * [168]Eric S. Raymond, writer of several and excellent articles, which inspired so many vocations. * [169]Larry Wall, author of Perl and of the patch tool, and philosopher. * [170]Alan Cox, mister "do everything". * Tim O'Reilly <[171]ask_tim_at_oreilly.com>, free software advocate and editor of several books dedicated to them. All these personalities are, above all, excellent computer engineers, which allows them to be recognized as major actors of the free software movement. Their human and communication qualities are also strong characteristics of their nature. In any case they aren't considered for their power, but for their knowledge. Of course, the free software community is built of thousands of programmers, whose complete list would be too tedious. All share the will of producing useful work, free, and to be recognized for their technical qualities above all. _________________________________________________________________ 2.2.2. The choice of free software To use free software to bring solutions in a computing environment is a choice. First, it is in favour of a plurality of solutions, mainly in the personal computer world which tends to be monopolistic. Then, the choice is made, and that's what is finally important, on the own qualities of free software, which are detailed just below. Source code access This point is the most important of the choice, because it allows the undestanding, adaptation, correction, distribution, improvement of the software. Reliability That quality is derived from the previous one: the free software is the combined result of the experience and the intelligence of all the participants. Its reliability increases then as time passes, with all the corrections which are made. More over, no marketing pression requires the software's producer to deliver it to its customers before it is in a satisfactory state. Portability This quality is not intrinsic to free software, but is very often seen in a free software. Indeed if a softawre meets success, it will necessarily be adapted to other environments than those initialy considered. Thus by increasing its disponibility, its portability and reliability are also increased. linux works today on a HP Jornada or IBM watch, as well as on s390 or SuperDome. Universality One essential quality of free software is the character naturaly universal of the data format used. Even if they don't follow standards, the availibility of the source code assures the user that he will understand them, and more over be able to write any filter needed to reuse these data or exchange them with other software. This allows also users to stabilize their environment, because they are not required to migrate due to incompatibility of data formats in their applications. Don't forget that your data are precious ans thet it's better to archive them under a *ML format (HTML, XML, SGML, ...) rther than a proprietary one. Performance Resulting from a lot of examinations, the use of algorithms coming from advanced research works, as well as tested by various usages, free software have good performances by nature. Frequently large portions of code are rewritten to allow the reuse of the original ideas with a better code and thus to increase performances. Several tests made by various organisms tend to prove it also Table 2-1. Performances of Free Software Subject URL [172]Apache Web Server and competitors [173]http://www5.zdnet.com/products/content/pcmg/1709/305867.html SMB [174]SaMBa server vs Windows NT [175]http://www.zdnet.com/sr/stories/news/0,4538,2196106,00.html Once more, there is no obligation to diffuse an application whose performances would be bad. Interoperability Interoperability is a reality of today's enterprises. Historically, Unix environment was always a ferment for interoperability with other systems (big or medium size systems, as well as personal computers). The support in Linux, for example, of a lot of network protocols, filesystem formats, and even binary compatibility modes assures a good interoperability. By the way, interoperability requires 2 actors, and having only one open is generally not sufficient. That's the goal of having RFCs, norms, standards, ... Reactivity When considering the more and more longer development cycles of the software editors, the reactivity brought by the free software movement is interesting for a lot of sites, concerned by the rapid obtention of corrections to a given problem. Thus, during the recent discoveries of IP problems (ping of the death,...), patches were always available within the next 3 days. And above that, only the patch correcting the hole found was delivered. There were no functionality added, which could have create other instabilities. Security The best computing security possible is ensured by a robust construction, public and reknown algorithms, a quick communication around flaws, ... In other words by transparency. Obscurity is in this domain bad, useless and even dangerous. In the free software world, the reactivity described in the previous paragraph is a garanty of increased security, ... at the condition that patches are applied regularly. Independantly of its qualities, it's possible to give other reasons of various nature, in favor of free software, depending on the type of the person met. _________________________________________________________________ 2.2.2.1. Marketing argumentation Studies from IDC bring to light the irresistible rise of Linux as a server operating system. In 1998, Linux is credited with 17% of market share, with an increase of 212%, which is the most important in that domain. The following graphics give the whole market share repartition. Figure 2-1. Server operating system repartition in 1998 (IDC). [idc1998.png] This was confirmed in 1999 with a market share climbing to 24% and an ancrease of 93%, always more than four times the increase of the follower. Figure 2-2. Server operating system repartition in 1999 (IDC). [idc1999.png] Dataquest [176]estimates on its side that Linux servers will represent, with 1.1 million of units, 14% of the servers sold in 2003. The Net itself produces marketing tools to demonstrate the superiority of free software. Counters are regularly updated by [177]Netcraft and others, on web server software, and another was done by [178]IOS Counter for the servers on Internet. Results, reproduced below, show the importance taken by [179]Apache with more than 16 millions of operational sites (among them 30% run Linux), crushing the competition, as well as the free operating systems Linux and *BSD which dominate the world of Internet servers. Figure 2-3. Web server software by Netcraft between 1995 and 2001. [netcraft.png] Figure 2-4. Repartition of Internet servers by IOS Counter in April 1999. [ioscounter.png] A detailed explanation based on the most precise numbered results is also regularly updated, showing the advantages to use free and open source software, Cf: [180]http://www.dwheeler.com/oss_fs_why.html. _________________________________________________________________ 2.2.2.2. Financial argumentation Financial factors also speak for free software. And first the price to aquire them is low. Low, because it's never zero. Even if you can find it on the Internet, you have to consider the costs related to that link. However costs are greatly less expensive than for commercial software. So a RedHat 9 Linux distribution, delivered with more than 1400 software packages, costs about 60 USD when you have to pay more than 800 USD to obtain Windows 2003 server, delivered only with IIS. On the other side, free software don't have the notion of license by user or by supplmentary service. Thus there is no additional cost when you have to increase the use of these software in your entity. That's of course not the case with commercial software whose economical logic is often based on the number of licenses. Free software bring in addition a better mastering of the TCO (Total Cost of Ownership), mentionned so frequently in the massive deployment of personal computers. Thus administration costs are reduced because systems like Linux or FreeBSD, as Unix, are managed completely remotely, either through command line orders (with telnet or ssh) or in graphical mode by using X-Window. More over, we benefit from a true multi-users mode, improving these management operations. Always in this domain, it's also possible to do remote management, either through the own hardware capacities of the machine (as the Remote Assistant card integrated in most HP NetServers or Prliant servers with the RILO card), or by doing a remote connexion (through modem, ISDN adapter or a permanent link) thanks to the native PPP protocol and secure connexion systems as tunneling or ssh. This managemnt could even be realised by an external entity, in outsourcing. At last, the costs due to the hardware themselves could be controled; on one side, if by chance free software don't meet the needs, it's always possible to buy then commercial software solutions to cover the rest on the same hardware. On the other side, solutions based on free software have good performances by nature, and can use hardware platforms which would be considered as obsolete, if installed following the standard criterias of other operating systems or applications. The fact to separate the graphical interface from the rest of the working system is here key. It's so possible to use "old" hardware, mainly to model. It's then possible to invest, with a fine knowledge, when puting the solution in operation, if needed. The power increase may naturaly take place progressively. _________________________________________________________________ 2.2.2.3. Technical argumentation This argumentation was already given in the previous sections. I think nevertheless that some notions may be explained with complementary information. So concerning the reliability aspects of free software based solutions, it's important to note that it implies an operational running time very high (standard characteristic of Unix systems in general). This is mesured by the command uptime. One of Medasys and HP customers, Saint-Michel Hospital in Paris, has a Vectra VL5 acting as router under Linux since more than 300 days. And that's not a isolated case. Respect of standards and norms, as well as the extreme portability of free software assures also to applications developed on these platforms the same qualities. And notably, if after their use, the performances or services brought by free software based architectures were insufficient (it may be caused by architecture problems such as PCI bandwidth, number of processors available, ...), it would be easy to migrate to machines offering more performances and capacities of evolution, as the HP 9000 systems, running HP-UX. At last a development plan centered around performances implies a modularity, such as it's possible to resize the system kernel nearest to the capacities of the hardware or to use dynamically loaded modules following the needs. A packages installation may vary from 40 MB for a minimal system up to many GB for a complete distribution. The system linearity allow also the support of multi-processors machines (SMP) (tested up to 32 processors on a Sparc machine). The system modularity allows also to obtain an operational system on a 1.44 MB floppy disk, either to realize a minimal repair environment, or to provide a perfectly operational router. The world of embedded systems shows besides more and more interest for systems such as Linux, because above it's modularity, source availability makes communication with dedicated peripherals easier (acquisition cards, sonde, ...). Entities as CERN or Thomson already use such solutions. _________________________________________________________________ 2.2.2.4. Solutions argumentation That argumentation is probably the most important of all, because it's useless to have free software if it's not to make something useful with it or to offer solutions to demands of entities willing to use it. In which sectors free softawre may bring solutions today ? Well, you have to admit it's in nearly all the sectors of enterprise computing. Historically, Open Source Software were used to realise Internet/Intranet servers, because their growth was following the one of the Net. It's so possible to cover all aspects linked to the Internet, from the Web server ( [181]Apache ), FTP server ([182]Wu-Ftpd), DNS server ([183]Bind), the E-Mail server ([184]Sendmail or [185]PostFix ), the Usenet groups server ([186]INN), the proxy server ([187]IPmasqadm), the firewall ([188]IPChains or [189]IPTables), Virtual Private Network ([190]OpenSSH), the Cache server for the Web ( [191]Squid ) or also the Time server ([192]NTP) or as directory service([193]LDAP) server, or as content management([194]Midgard) server ... All these software are available in standard in a Linux distribution. The client computer should be equiped with the software corresponding to the application used (mail reader, news reader, web browser, ...) whatever its operating system. The choice of the client is free, as all these tools respect the standards decreed in the [195]RFCs. The second preferential domain for free software is the file and print server domain. For these services, clients may be multiple: Unix type (use of [196]NFS and [197]KNFS or also [198]Coda and [199]Inter-Mezzo, for file sharing and of lpd or [200]CUPS for print service), Microsoft Windows type (use of [201]SaMBa , which allows also the use of local client printers), Novell type (use of [202]Mars_nwe) or MacIntosh type (use of [203]NetAtalk). All these software are provided in standard in a Linux distribution and don't need any modification at the client level to work. The other domains where a system such as Linux may bring solutions is the computation one, with support of [204]multiprocessor, linked to the realisation of [205]clusters with multiple nodes with [206]Mosix or [207]BeoWulf with high-speed network interfaces (100 Mbit/s, [208]Gigabit or [209]Myrinet); those of data security with the support of HP NetRaid^[210]Rem. cards, allowing Raid level of 0, 1, 3, 5, 10, 50, and HotSpare disks, managed by the harware; those of centralized fax server, with a free software like [211]HylaFAX or also as an archive/backup server with HP SureStore DAT or DLT libraries thanks to a GPL software like [212]Amanda or a commercial one like [213]Arkeia or at last as a database server with free solutions like [214]PostgreSQL,[215]MySQL or commercial like [216]Oracle, to speak only of these three. On the client side, even if it's less highlighted for the moment, possibilities to use solutions based on free or commercial software are numerous. Here also the Internet part is the main one, with tools like graphical web browsers ([217]Netscape, [218]Mozilla [with [219]101 good reasons in its favor] or [220]Konqueror) or textual ([221]lynx or [222]w3m), a lot of graphical mail readers ([223]Kmail, [224]XFMail, ...) or textual ([225]mutt, [226]elm, ...). But you also have the whole panel of indispensable tools for a personal computer today as a PDF reader ([227]Acrobat Reader or [228]xpdf), image manipulation tools ([229]ImageMagick, [230]the Gimp, [231]RealPlayer tools ...), word processors ([232]LyX, [233]LaTeX, [234]SGMLTools, [235]Wordperfect, ...), commercial office suites ([236]ApplixWare, [237]StarOffice), or opensource ([238]Koffice, [239]OpenOffice.org, ...), sound management tools ([240]Xmms, [241]eplaymidi, [242]xmcd, ...), CD burning tools ([243]cdrecord, [244]BurnIT, ... with complements as [245]mkisofs, [246]cdparanoia, [247]cdrdao), free and commercial emulators for various systems ([248]Wine, [249]Executor, [250]WABI, [251]DOSEmu,[252]Win4Lin, [253]VmWare...), compilers and interpretors for all the languages ([254]C, [255]C++, [256]Pascal, [257]Fortran, [258]Basic, [259]Tcl/Tk, [260]Perl, [261]Python, [262]Ada, [263]Eiffel, [264]Lisp, [265]Scheme, [266]Prolog...), including commercial versions ([267] PGI, [268]Intel...), graphical environments ([269]Gnome, [270]KDE, [271]Motif, [272]OpenMotif, ...). The evolution of these last tools indicates that the 2000's may be the years where Linux and free software will break through at their turn on the client. We should note that the completeness of Linux distributions increases continuously in order to make them able to cover more and more computing solutions. A [273]recent study on the Debian distribution showed that investment should have been of 2 billions euro in order to develop its 55 millions of code ! I want to mention that this document was realised on an HP Brio BAx, then on a Vectra VL400 equiped only with a Linux distribution, with the help of tools like [274]DSSSL style sheet, [275]OpenJade and [276]DocBook, [277]ViM which allowed to generate from a single source the formats HTML, Txt, RTF, PostScript, and PDF. _________________________________________________________________ 2.2.2.5. Service argumentation This one was for a long time a blocking point to the expansion of free software in the firms. It's not the case today. Many service providers or hardware manufacturers, like HP, control today these solutions and propose support around them, uoto missions critical if requested. Other sources of information are also available, in abundance, through several web sites dedicated to these solutions, specialised mailing-lists, and various Usenet groups, such as for Linux, the international groups under comp.os.linux.* or for the french speaking people under fr.comp.os.linux.*. Concerning competences, more and more young engineers or academics finish their learning cycle being trained to the use of free applications and operating systems. This wealth of competences arrives now on the labour market and will contribute to increase the movement of generalisation of these tools. At last, many firms have internaly ignored competences. In fact, their employees often install this software at home, and have a good mastering, usable when arrives the deployment of the software in their professional structure. _________________________________________________________________ 2.2.3. Wrong ideas on free software Advocating free software consists also to mention some generally accepted ideas concerning them and to fight them. "There is no support, no training" As seen previously, support is currently structuring itself. A firm like [278]RedHat provides today support for their solutions. Only in France, we may mention firms like [279]Medasys , [280]Atrid, [281]Alcove which assure support on free software. Likewise, always in France, training on free software may be given by [282]HP France, [283]Learning Tree, the [284]IUT de Vélizy, without mentioning generic network and Unix trainings (besides proposed also by the same organizations) which represent a fundamental base in a training course. And at last, we should mention the ability of each of us to self-train, mainly thanks to the huge documentation available (See the [285]Chapter 7). "There is no documentation" There is a whole set of manuals, the [286]Linux Documentation Project, made of FAQ (Frequently Asked Questions) and HOWTO, counting more than 300 documents around Linux, the main being [287]translated in french, and [288]in japanese available as free documentation. This documentation has a various quality, more or less up to date, following the subjects, certainly but it makes a corpus allowing to apprehend alone a Linux distribution and all its components. For myself, I always found in it everything I needed to do my job with free software. And, in case of complementary information, a lot of web sites and Usenet groups may again bring some of the elements needed. And without counting the innumerable manual pages available on line. Each distribution comes also with a comprehensive set of manual covering all the tasks of installing, handling and managing them. On the other side, the editors [289]O'Reilly and [290]SSC have specialised in providing books around free software, written generaly by the writers of the software themselves. Their books are considered as reference books in their respective domains. "A free or nearly free product is a toy" You should always make a difference between free (as speech) and free (as beer). Too many freeware in Microsoft environment are in fact toys and of poor quality. It's absolutely not the case for free software, as stated in the previous sections. Remember just that they are reliable by construction. "Linux is difficult to install" Linux is a professional operating system. At that title, it requires competences to install it, as well as any other professional operating system, like the other Unix or Windows NT for example. But it isn't more difficult to install than those either, mainly thanks to distributions as RedHat, Mandrake, ... You need about 30 minutes to realize a complete installation of such distributions, so quite the same as for HP-UX and noticeably less than for Windows NT Server. On the other hand, as before installing a server with Windows NT you have to verify its compatibility with the [291]Hardware Compatibility List of Microsoft, for Linux it's also greatly recommended to verify the [292]Hardware HOWTO, and for HP machines to refer to [293]Section 3.2. "Free Software are not adequate for heavy tasks" This is less and less true and this criticism has been obsoleted with the latest versions of the Linux kernel which will include a journalised filesystem, allowing a true application cluster. But already Linux authorises the use of multi-processors, several nodes to realise computation clusters. And don't forget it's used by the portal [294]Voila (France Telecom) or the engine [295]Google among other prestigious references. As well, FreeBSD is used with success as the world biggest ftp server : [296]Walnut Creek CDROM server Useful projects to consult in this area of high availability are [297]http://www.linux-vs.org, [298]http://www.opengfs.org and [299]http://www.linux-ha.org "What appeal do I have in case of problem with the editors ?" There is no appeal, because software licences deny all responsabilities for the writers, in case of problem. But, in reality developers are always ready to help in case of problem and try to correct as soon as possible the bugs encountered (for the F00F bug of the pentium, a patch for the Linux kernel was published within 3 days, for example). On the other side, commercial editors guarantee very badly users against problems other than packaging errors. Please read the notes furnished with your software to judge. _________________________________________________________________ 2.2.4. Real problems around free software It would not be honest to negate certain remaining problems linked to free software. Some have begun to disappear, other are inherent to the system, other at last will take time to diappear. The first problem, inherent to the model of free software, is the multiplicity of tools and distributions available. So, if you want to setup a mail server, you have to choose between Sendmail, Exim, PostFix, Qmail, Smail. As well if you want to install Linux, you may choose between the distributions [300]RedHat , [301]SuSE, [302]Slackware, [303]Mandrake, [304]Turbo Linux, [305]Debian. This represents often a problem for the newcomer, but the esperienced user will always prefer to have a large choice he will confront to his particularities and to his experience. As long as an actor respects the rules by freeing his code (it's the case of the rpm and deb formats for example), there is little risk from the comunity point of view. The key point is that the choice is made only taking in account technical criterias. The second problem, inherent also to the free software birth, is the necessity to have strong Unix and Internet competences, to manage such solutions. The power available through these systems is proportional to the competence of their administrators. And that will stay true even with the growth of more and more grahical solutions to manage them. On the other side, you capitalize the investment in time to learn their functions and that doesn't disappear, because you don't have to re-learn eveything from one version to the other (I use the same editor, vi, for the last 15 years). Don't forget that systems you use daily seem to be simple, uniquely because you passed enough time to learn them. For Internet competences, it's a statement of the obvious to say that this investment isn't lost. At last, even with the work of translators to provide information in french and other languages, a good knowledge in technical english is definitively a plus. The last problem met in the implementation of free software solutions is to suceed in convincing some managers to go against the prevailing opinion. The aim of this chapter is precisely to give all sorts of argumentations to achieve that goal, but you need each time to show conviction to get his way in the end. As soon as these solutions will be adopted by big firms principaly, resistances will disappear. _________________________________________________________________ 2.3. Linux and other operating systems The aim is not to examine completely or to compare the functions of the various operating systems available. It's more upon looking at the respective positions of Linux in comparison with other systems. Only systems having a sufficient representation on the market are considered. _________________________________________________________________ 2.3.1. Linux and other proprietary Unix (HP-UX, Tru64, AIX, Solaris, Irix) The situation taken by all the hardware manufacturers places Linux today in the entry level (when it's taken in account) and their own Unix system in the middle and high level. Reality is sometimes more cruel than the situation wanted by the marketing department :-). Technically, a Linux distribution has no cause to be envious of the manufacturers Unix solutions, except for the moment the set of commercial applications and some high-end hardware configuration support. And we can often see that users dope their Unix workstations with free software to complete their usage. To be precise in the talk, we should consider manufacturers Unix solutions as split in stations and servers. On the station side, there's no doubt in my mind: for a customer, the only reason today to buy one is linked to the availability of a software or a hardware which wouldn't exist in the free environment, or due to intrinsic performances of the machine. In the first case, we can see that this argument should have a short life time, because logically every software editor (except maybe hardware manufacturers) and every hardware manufacturer has interest in porting their applications or allowing the use of their hardware on all the major environments in the market. As shown by Oracle, Informix, Sybase, ... Linux becomes today one of the major environments. In the second case, the difference in term of performances between the Linux dominant platform (IA-32) and the other competitors decreases and will disappear with the generalisation of the IA-64 architecture, which seems to be adopted largely by a majority of actors. More over, Linux is often available natively on the processors of these actors (Sparc, Mips, PowerPC, 68xxx, Alpha, Crusoe, PA-Risc, Itanium). I think Linux may represent the famous unique and standard Unix that everybody dreamed of from a long time, without succeeding to impose it (the open and free characteristics brought by Linux are not without influence on that). I think that at the end hardware manufacturer Unix workstations will be restricted to some niches such as high end computation, virtual reality, ... and that as long as solutions are not available on a free environment. Linux offers all the functional qualities of the other Unix systems, and thus of the workstation, on a more various hardware platform and potentially at a better price, if on PCs. So it is the natural choice of every computer engineer with a strong Unix culture (old customer of the workstation) who will prefer that solution to the migration to a Microsoft system typically. With IA-64, we can see that Linux was the first operating system available (including graphical support). On the server side, in addtion to the points mentionned previously for the stations, problems are more complex. Ram, disks, processors capacities, extensions of every kind make them difficultly repleacable by machines with a IA-32 architecture for example. More over, certain solutions such as high availability clusters for example have just been put in production in a Linux environment, compared to years of operation under Unix. The other brake is often linked to investments already done around software solutions deployed on these servers. Whatever their natural life time is much higher than those of the stations. Changes will thus be made more slowly in that domain. Here we can consider rightly Linux solutions as an entry/middle level solutions, when hardware manufacturer Unix servers are the middle/high level. The introduction of Linux in place of these machines will begin only with a massive availability of applications, mainly in the management sector. Again IA-64, with increased SMP capabilities (16 processors today), higher bandwidth, ... will make things change. The advantages of the hardware manufacturer solutions, explaining why they are so often chosen when applications are critical, are linked to the homogeneity of the solution (hardware and software mastered by the same entity, which can't invoke a third party in case of problem), and to the support and maintenance guarantees furnished. Finally, there is not so much antagonism between these systems, because they are full cousins. Their association allows today to computer teams "pro-Unix" to have solutions from start to finish, without having to lose in functions, as it's so often the case with other operating systems available for personal computers. _________________________________________________________________ 2.3.2. Linux and SCO/Caldera The comparison between Linux and the SCO systems seems to me quite unbalanced. First, all the previous points are vaild here also. More over, SCO isn't a hardware manufacturer, so the homogeneity advantage disappears. The IA-32 Intel platform is supported by both systems, so cost is identical. On the other hand, the software solution has a disproportionate cost (few software provided in the base install, thus a lot of expenses to extend, as well as to increase the number of users). Having to manage one OpenServer, I can say that performances are far beyond those of a Linux system. More over, its conception is older, abounds of symbolic links which makes management complex. The hardware supported by SCO is less numerous than those Linux supports. Only stay as an advantage the installed base and the set of applications available. But for how long ? Caldera now owns both SCO software (Openserver and Unixware) and its own Linux distribution. But instead of trying to free technologies from SCO, they are proprietarizing their linux (1 license per server). As mentioned upper, few advantages remain to SCO. They have thus recently decided to walk the legal way, to try taking back superiority. This attempt, far from the Free/Open Source philosophy, should incite ISVs to consider migrating to Linux. _________________________________________________________________ 2.3.3. Linux and Windows NT/2000/XP The comparison is here more difficult, because Windows NT/2000/XP isn't an open system, as the precedings, which is already redhibitory for certain users. An excellent [306]comparison was made by John Kirch between Unix and Windows NT Server. I recommend to people searching to have an enlightened opinion on this subject to read it; it's updated regularly and was written by a specialist of both Microsoft and Unix operating systems. Financially, obvious advantage for the free software. And it's more obvious, as for SCO, if you consider the set of complementary software you need to use a server. The author evaluates the difference from 1 to 100 all the same ! Technically, either on the functions provided or on the reliability, the administration, the performances, the hardware supported, and more over the security, Unix systems and particularly free systems outperform what is proposed by Windows NT/2000/XP. The fact to have a GUI non independant from the kernel contributes greatly to the instability of NT/2000/XP, because it's more difficult to avoid errors in a GUI (there is no mastering possible of the user comportment in front of it) rather than in a kernel. Which are the real advantages of Windows NT ?: the marketing power of Microsoft which persuades the world that computers equal Windows and which leans on the enormous installed base; its office applications (a monopolistic situation on the market) only available in this environment; the confusion maintained between the various flavours of Windows (95/98, NT, 2000), and between the server and client functions; its agreements with the biggest hardware manufacturers which often require them to provide a Microsoft system with their platforms; its technological initiatives to occupy the market in first, based on proprietary code and that often without respect of known or documented standards, or its policy to embrace for killing a movement (described in the [307]"Haloween documents"). The lack of hegemony in the servers sector is the best reason to hope that a plurality of solutions may exist in the future for computers users, also at the desktop. The new XP licensing schema, the passport tool, the registering mechanism during installation are real brakes for users thinking to migrate from a current platform to a new one, as well as the hardware costs linked. In that perspective, an opensource solution should and will be more and more considered. An analysis of the advantages of Open Source for desktop machines is available at [308]http://people.trustcommerce.com/~adam/office.html An analysis of various tests published between Windows vs Linux are available at [309]http://www.kegel.com/nt-linux-benchmarks.html At last, those who want to migrate from Windows to Linux will probably find useful the page [310]http://linuxshop.ru/linuxbegin/win-lin-soft-en _________________________________________________________________ Chapter 3. Linux and HP products To maintain such a chapter is an endless task :-). _________________________________________________________________ 3.1. Informations on HP products and Linux 3.1.1. General information HP became recently concious of the importance taken by Linux and free software in general, and on its machines particularly. Thus a web site dedicated to Linux in HP environment is now available at [311]http://www.hp.com/go/linux. In France, there is for a longer time a site on these themes, under the responsability of Jacques Misselis, hosted by [312]l'École Centrale de Lyon at the address [313]http://hpwww.ec-lyon.fr/hpeduc/education. On the other side, the firm Medasys for which I worked between 1996 and 2000, put at disposition of the community a certain number of information since 1997, available at [314]http://www.medasys.fr/linux. This HOWTO is the result of this work. HP also realised a synthesis document (PDF format) concerning his position in front of Linux, the [315]White Paper HP Linux Strategy (1999-04). HP is a member or sponsor of [316]Linux International,[317]Open Source Development Lab, and [318]Linux Standard Base. _________________________________________________________________ 3.1.2. Particular announces HP also communicates through its web site around Linux and free software. You'll find some links here. * FireHunter announce (1998-10-06) [319]http://www.hp.com/communications/solutions/isp/tools/pressroo m/releases/pr032999a.html * Covision program announce (1999-01-27) [320]http://www.hp.com/pressrel/jan99/27jan99b.htm * Linux support on NetServers and IA-64 announce (1999-01-27) [321]http://www.hp.com/pressrel/jan99/27jan99.htm * PA-Risc port announce (1999-03-01) [322]http://www.hp.com/pressrel/mar99/01mar99e.htm * Informix HP association announce (1999-03-02) [323]http://www.hp.com/pressrel/mar99/02mar99i.htm * Kayak Linux support (1999-03-17) [324]http://www.hp.com/pressrel/mar99/17mar99e.htm * World Linux support announce (1999-04-20) [325]http://www.hp.com/pressrel/apr99/20apr99a.htm * HP OpenView announces (1999-05-17) [326]http://www.openview.hp.com/solutions/itsm/press/press.asp?doc id=314 * Availability of Apache on HP 3000 (Summer/1999) [327]http://www.businessservers.hp.com/falladvisor/sum99/Summer99/ apache.html * Visualize Linux support announce (1999-06-21) [328]http://www.hp.com/pressrel/jun99/21jun99g.htm * Open Source Software commitment by HP (1999-08-09) [329]http://internetsolutions.enterprise.hp.com/linux/news/PReleas e4.html * Aberdeen group analysis on HP position on free software (1999-08-09) [330]http://internetsolutions.enterprise.hp.com/linux/news/aberdee n_white_paper.html * HP Linux vision (01/01/2000) [331]http://www.hp.com/visualize/programs/news/archive/linuxvision .html * HP announces the certification of its DAT and DLT products under Linux (02/02/2000) [332]http://www.hp.com/pressrel/feb00/02feb00c.htm * HP Brings Award-winning 3-D VISUALIZE Graphics to Linux Desktop (02/02/2000) [333]http://www.hp.com/pressrel/feb00/02feb00b.htm and [334]http://internetsolutions.enterprise.hp.com/linux/feb02page.ht ml * HP and Intel Release IA-64 Developer's Kit for Linux (2000-06-13) [335]http://www.hp.com/pressrel/jun00/13jun00a.htm * HP Announces Linux Support for State-of-the-art 3-D Graphics Accelerators (2000-07-25) [336]http://www.hp.com/pressrel/jul00/25jul00b.htm * HP Expands Commitment to Linux (2000-08-14) [337]http://www.hp.com/pressrel/aug00/14aug00.htm * HP adds Linux support for its Chai appliance platform Software (2000-09-26) [338]http://www.linux.hp.com/news_events/press_releases/linux_chai .html * HP NetServers make Linux Hum for Solid State Design [339]http://netserver.hp.com/netserver/docs/download.asp?file=cs_s olid.pdf * Medasys chosen by Hewlett-Packard France Education/Research as Linux competence center [340]http://hpwww.ec-lyon.fr/hpeduc/education/offre/linux/educ_lin ux.html * Hewlett-Packard France Education/Research announces commitment to Linux promotion [341]http://hpwww.ec-lyon.fr/hpeduc/education/offre/linux/hp_linux .html * HP's open letter to the Open source Community (2000-10-18) [342]http://www.linux.hp.com/news_events/open_letter.html * HP Ultrium Tape Drives Certified to be Linux Compatible (2000-11-21) [343]http://www.hp.com/hpinfo/newsroom/press/21nov00b.htm * Bruce Perens, Open Source advocate, joins HP (2000-04-12) [344]http://www.HyPer-Linux.org/HP-HOWTO/mirror/html/perens.html (Original: [345]http://www.linux.hp.com/news_events/perens.html) * Bruno Cornec, yours sincerely, joins HP (2000-04-18) [346]http://www.doyoureallythinktheyspeakofthatinthepress.com * OSDL opens today with 19 sponsors including HP (2001-01-24) [347]http://www.hp.com/hpinfo/newsroom/press/24jan01b.htm * HP Extends Linux Support for Enterprise Solutions (2001-01-31) [348]http://www.hp.com/hpinfo/newsroom/press/31jan01a.htm * HP's commitment for Linux during Linux-Expo Paris 2001 (02/02/2001) [349]http://www.france.hp.com/main/une/temoignages/linux/expo.php3 * HP opens print driver source code (04/04/2001) [350]http://www.itworld.com/Comp/2362/LWD010404hpdrivers/ * EMEA announces around Linux (Trusted Linux, Mandrake Certification, ...) (2001-08-22) [351]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Press/PREMEA200108 22.pdf * B. Maillard Interview (HP France) (2001-08-24) [352]http://solutions.journaldunet.com/itws/010824_it_hp_maillard. shtml * HP Expands Open Source Offerings with Linux Security Software and Embedded Software Platform for Intelligent Devices (2001-08-27) [353]http://www.hp.com/hpinfo/newsroom/press/27aug01b.htm * HP Builds Supercomputer from Off-the-Shelf Parts (2001-10) [354]http://www.hpl.hp.com/news/2001/oct-dec/supercomputer.html * HP's Linux stratégy (2001) [355]http://www.hpbriefingroom.com/north_america/linux/index.html * HP, Red Hat Provide Selected Universities Worldwide with Grants of Red Hat Linux Software (2001-11-06) [356]http://www.hp.com/hpinfo/newsroom/press/06nov01a.htm * HP Extends Linux and Open Standards Leadership with New Blade Servers (2001-12-04) [357]http://www.hp.com/hpinfo/newsroom/press/2001/011204b.html * HP Unveils New Linux Solutions for Enterprise, Telecommunications Customers at LinuxWorld (2002-01-29) [358]http://www.hp.com/hpinfo/newsroom/press/2002/020129a.html * HP France annonces HP servers A and L under Linux Debian (2002-02-12) [359]http://www.france.hp.com/produits/serveurs/hp-servers/pa-risc /linux.php3 * HP, DreamWorks Announce Strategic Alliance Aimed at Revolutionizing Animation Production (2002-01-30) [360]http://www.hp.com/hpinfo/newsroom/press/2002/020130a.html * HP CEO Carly Fiorina Says Linux Ready for Breakout Year (2002-01-30) [361]http://www.hp.com/hpinfo/newsroom/press/2002/020130b.html * HP: Linux as important as HP-UW or Windows (01net) (2002-02-01) [362]http://www.01net.com/article/175483.html * HP Announces Global Consortium to Enable New Linux Capabilities for Academic and Industrial Research (Gelato) (2002-03-11) [363]http://www.hp.com/hpinfo/newsroom/press/2002/020311a.html * HP's Carrier Grade Servers with Linux Outperform Sun's Netra Servers on Key Industry Benchmark (2002-04-03) [364]http://www.hp.com/hpinfo/newsroom/press/2002/020403a.html * HP to Provide U.S. Department of Energy Laboratory One of World's Fastest Supercomputers (2002-04-16) [365]http://www.hp.com/hpinfo/newsroom/press/2002/020416a.html * Bdale Garbee chosen as Debian Project Leader (2002-04-17) [366]http://www.debian.org/vote/2002/vote_0001 * HP Receives Strong Marks from D.H. Brown for Leadership in Linux and Open Source (2002-04-23) [367]http://www.hp.com/hpinfo/newsroom/press/2002/020423a.html * Reuters Supports Adoption of Linux in Financial Services Industry using Intel-Based Servers (2002-05-16) [368]http://www.hp.com/hpinfo/newsroom/press/2002/020516b.html * HP Helps DreamWorks Create "Spirit: Stallion of the Cimarron" (2002-06-03) [369]http://www.hp.com/hpinfo/newsroom/press/03jun02c.htm, [370]http://www.linuxjournal.com/article.php?sid=4803 and [371]http://www.linuxjournal.com/article.php?sid=6103 * HP, Oracle and Red Hat Combine Engineering Expertise to Further Develop Linux Solutions for the Enterprise (2002-06-05) [372]http://www.hp.com/hpinfo/newsroom/press/2002/020605d.html * HP and Cadence Advance Alliance to Bring Electronic Design Automation on Linux (2002-06-11) [373]http://www.hp.com/hpinfo/newsroom/press/2002/020611a.html * HP Drives Next-generation Animation on Linux with Walt Disney Feature Animation (2002-06-18) [374]http://www.hp.com/hpinfo/newsroom/press/2002/020618c.html * HP and Red Hat Expand Relationship to Deliver Linux Solutions to Enterprise Customers (2002-06-18) [375]http://www.hp.com/hpinfo/newsroom/press/2002/020618d.html * U.S. Department of Energy Agency (PNNL) Selects HP to Co-develop Linux Software for Clustered Computing (2002-08-08) [376]http://www.hp.com/hpinfo/newsroom/press/2002/020808b.html * HP Unveils Enhanced Linux Product Portfolio Delivering Powerful, Flexible Business Platform (2002-08-13) [377]http://www.hp.com/hpinfo/newsroom/press/2002/020813b.html * Sendmail, Inc. and HP Demonstrate Demand for Linux-Based Email Systems on HP ProLiant Servers (2002-08-13) [378]http://www.hp.com/hpinfo/newsroom/press/2002/020813c.html * HP's Linux Solutions Chosen by L-3 for Tightened Airport Security (2002-08-13) [379]http://www.hp.com/hpinfo/newsroom/press/2002/020813d.html * Media Temple Chooses Linux-based HP Servers to Replace Dell Servers (2002-08-14) [380]http://www.hp.com/hpinfo/newsroom/press/2002/020814a.html * HP Announces First Linux Cluster TPC-C Benchmark with Oracle and Red Hat (2002-09-16) [381]http://www.hp.com/hpinfo/newsroom/press/2002/020916b.html * HP First to Offer Red Hat Linux Advanced Workstations for Itanium 2-based Systems (2002-09-17) [382]http://www.hp.com/hpinfo/newsroom/press/2002/020917c.html * HP Elected as Supporting Member of Eclipse Open Source Consortium (2002-09-25) [383]http://www.hp.com/hpinfo/newsroom/press/2002/020925c.html * HP Joins CERN Collaboration to Advance Grid Computing Technologies (2002-09-25) [384]http://www.hp.com/hpinfo/newsroom/press/2002/020925b.html * HP Supercomputer to be Deployed at Ohio Supercomputing Center for Advanced Research (2002-10-21) [385]http://www.hp.com/hpinfo/newsroom/press/2002/021021d.html * Prentice Hall PTR and HP Publish "The Business and Economics of Linux and Open Source" (Martin Fink) (2002-10-24) [386]http://www.hp.com/hpinfo/newsroom/press/2002/021024b.html * Benchmark Shows HP ProLiant Servers Running Linux-based Sendmail Email Solutions Outperform Sun Platforms (2002-10-31) [387]http://www.hp.com/hpinfo/newsroom/press/2002/021031b.html * HP, Pittsburgh Supercomputing Center Form Grid Alliance. (2002-11-14) [388]http://www.hp.com/hpinfo/newsroom/press/2002/021114c.html * Rice University Terascale Cluster to be Built with HP's Intel Itanium 2-based Systems Running Linux (2002-11-19) [389]http://www.hp.com/hpinfo/newsroom/press/2002/021119e.html * HP Showcasing Itanium-based Superdome Server Running HP-UX, Windows and Linux Concurrently (2002-12-09) [390]http://www.hp.com/hpinfo/newsroom/press/2002/021209b.html * TeraText Debuts Database Solution on HP Itanium-based Servers Running Linux (2002-12-09) [391]http://www.hp.com/hpinfo/newsroom/press/2002/021209c.html * HP Extends Linux Leadership with New Customers, Products and Services (2003-01-21) [392]http://www.hp.com/hpinfo/newsroom/press/2003/030121g.html * HP and Red Hat Expand Relationship to Offer Customers New Linux Options (2003-03-19) [393]http://www.hp.com/hpinfo/newsroom/press/2003/030319a.html * California Institute of Technology Selects HP Itanium 2 Systems for Scientific Research on TeraGrid Project (2003-04-16) [394]http://www.hp.com/hpinfo/newsroom/press/2003/030416d.html * BP Deploys HP Intel® Itanium® 2-Based Systems for Seismic Imaging Research (2003-04-21) [395]http://www.hp.com/hpinfo/newsroom/press/2003/030421a.html * The HP 'people's notebook' runs Linux (2003-05-12) [396]http://news.zdnet.co.uk/story/0,,t269-s2134514,00.html * HP Achieves First Linux Clustered Oracle Applications Standard Benchmark (2003-05-22) [397]http://www.hp.com/hpinfo/newsroom/press/2003/030522b.html * HP Extends Partnership with VMware to Power Server Consolidation and Workload Management (2003-05-28) [398]http://www.hp.com/hpinfo/newsroom/press/2003/030528a.html * HP Helps DreamWorks Create Bold New World for Shrek 4-D Animated Attraction (2003-05-29) [399]http://www.hp.com/hpinfo/newsroom/press/2003/030529a.html * HP Drives Open Architecture Technology Into Telecom Networks with New Rack Mount Server Based on Intel Processors and Linux. (2003-06-03) [400]http://www.hp.com/hpinfo/newsroom/press/2003/030603a.html * HP Reduces Complexity for Open Source Software Developers with New Tool Unveiled at JavaOne. (2003-06-10) [401]http://www.hp.com/hpinfo/newsroom/press/2003/030610a.html * HP Showcases New Customer, Investments and Programs in High-performance Linux Clustering. (2003-06-24) [402]http://www.hp.com/hpinfo/newsroom/press/2003/030624c.html * HP and SuSE Linux Expand Global Alliance (2003-06-26) [403]http://www.hp.com/hpinfo/newsroom/press/2003/030626a.html * DreamWorks Uses Linux-based HP Technology to Create New Animated Film "Sinbad". (2003-07-01) [404]http://www.hp.com/hpinfo/newsroom/press/2003/030701c.html * HP Delivers Affordable, Reliable Microtower PC to Small- and Medium-sized Businesses (Mandrake Linux) (2003-07-02) [405]http://www.hp.com/hpinfo/newsroom/press/2003/030702a.html * I've participated to a conference organised by Cyperus during the Linux-Expo Paris 2001. You could see it at this address [406]http://www.HyPer-Linux.org/HP-HOWTO/mirror/html/video2001.ram In 2002, I was interviewed alone this time, as you can see at [407]http://www.HyPer-Linux.org/HP-HOWTO/mirror/html/video2002.ram HP France has also published an article on Linux and free software in its May 1999 issue of HP Computer News, an article on HP Linux support in the September 1999 issue, and an article on Linux RedHat solutions on HP Visualize workstation in the November 1999 issue. _________________________________________________________________ 3.2. HP hardware supported by Linux This section presents HP hardware supported today by Linux. Informations are based on the latest stable version of the Linux kernel, which is currently version 2.4.21. A development kernel (version 2.5) is also available but doesn't offer any guarantee of stability. _________________________________________________________________ 3.2.1. Intel i386 based computer range Page last updated the 2003-10-01. That computer range is today the main set of HP machines supported by Linux, and that till many years. In case you didn't already do it before, some preliminaty readings are recommended before to try to install Linux on these platforms. The [408]Linux Installation HOWTO contains a great number of information to install Linux. If you bought linux on a CD-ROM, chances are that installation instructions are provided with it (the little booklet inside the disk case, and/or files on the CD). The [409]Linux Kernel HOWTO should be read to have details on kernel construction. I will just mention here points which are specific to HP hardware. Outside particular indication, Linux support means during the installation of a RedHat/Mandrake type distribution. In special cases, a kernel rebuild will be necessary to support completely some hardware elements. You should note that what is true for one distribution is generally true for another, as these functions are linked to the kernel or the XFree86 server, and not to the distribution itself. In case of problem, the first reflex should be to update the BIOS of the HP machine, and to verify whether the problem is always there. If yes, you may then contact HP support, if your configuration is supported by HP (This document focus on what is working, superset of what is supported, and has no value in that area). On the other hand, if your machine is working correctly, don't update the BIOS without reason, this is always a risked operation. BIOS updates are available from [410]http://www.hp.com/cposupport/software.html _________________________________________________________________ 3.2.1.1. The desktop range (Brio, Vectra, Kayak) HP has a new program called "Freedom of Choice" on the whole desktop range. Linux is thus one of the operating systems pushed by HP. Cf: [411]http://www.hp.com/desktops/linux/ and [412]http://www.hp.com/pressrel/aug00/14aug00.htm. A [413]FAQ is also available. HP insures the support of certified Linux hardware by the following method : all the machines have the [414]Diagtool utility. If this utility indicates a problem, it's taken in account by HP maintenance. If it doesn't, it's considered as a software problem and should be reported to the distribution provider. The partnership between HP and MandrakeSoft on desktop machines is detailed here: [415]http://www.mandrakesoft.com/oem/hardwarepart/hp The following tables indicate the state of Linux support by these platforms : Table 3-1. Brio and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested Brio (D5522A, D5526A, D5857A, D6665A, D5838A, D5848A, D6514A, D5527A, D5528A, D6666A, D6675A, D5849A, D5839A, D5859A, D6666A, D6510A, D6515A, D6667A, D5840A, D5861A, D6668A, D5840C, D5841A, D6516B) S3 Trio 64V2 PCI Yes XFree 3.3.6^[416]Rem. (S3) None N/A None N/A ??? ??? Yes Brio (D6810A, D6812A) ATI Rage Pro ZX AGP Yes XFree 4.3.0^[417]Rem. (ati) None N/A None N/A ??? ??? No Brio (D6638A, D6639A, D6640A, D6644A, D7901A, D7902A, D6645A, D6646A) Chipset BX[418]Rem. ATI Rage Pro ZX AGP Yes XFree 4.3.0^[419]Rem. (ati) None N/A None N/A ??? ??? No Brio (D5841A, D6516B) Matrox Millenium II PCI Yes XFree 4.3.0^[420]Rem. (mga) None N/A None N/A ??? ??? No Brio (D6760A, D7671A, D6908A, D7930A, D7672A, D7925T, D6776A, D6769A, D6755A, D6895A, D6896A, D6897A, D7931A) Matrox Productiva G100 AGP[421]Rem. Yes XFree 4.3.0^[422]Rem. (mga) None N/A None N/A ??? ??? No Brio BA (D7581A, D7584A, D7585A, D7587A, D7586A, D7591A, D7594A, D8411A) Sis 5595 AGP Yes XFree 4.3.0^[423]Rem. in Frame Buffer mode (FBDEV)[424]Rem. None N/A None N/A Cirrus Logic CS 4614 Yes driver Alsa^[425]Rem. No Brio BAx (D7600A, D7603A, D7624A, D7625A, D7630A, D7610A)[426]Rem. Matrox Productiva G200 AGP Yes XFree 4.3.0^[427]Rem. (mga) None N/A None N/A Cirrus Logic CS 4614 Yes driver Alsa^[428]Rem. Yes Brio BAx (D7605A)[429]Rem. Matrox Productiva G200 AGP Yes XFree 4.3.0^[430]Rem. (mga) ??? ??? None N/A Cirrus Logic CS 4614 Yes driver Alsa^[431]Rem. No Brio BA400 (D8760A, D8761A, D8763A, D8764A, D8767A, D8768A, D8769A, D8934A, D8935A, D8936A, D8943A, D8947A, D8952A, D8953A, D9720A, D9721A, D9724A) Intel i810 AGP[432]Rem. Yes XFree 4.3.0^[433]Rem. (i810) None N/A None N/A ??? ??? Yes Brio BA410 (P1682A, P1683A, P1686A, P1687A, P1689A, P1692A, P1694A, P1710A, P1711A, P1718A, P1719A, P1720A, P1722A, 03237A, P2738A, P2739A, P2741A, P2743A, P2745A, P2746A, P3235A, P3263A, P3264A, P3265A, P3266A, P3267A, P3268A, P3269A, P3271A, P3272A, P3662A, P3663A, P3664A, P3665A, P3666A, P4848B, P4849B, P4855B, P4869A, P4870A, P4872A, P5816B, P5817B, P5821B, P5822A) S3 Savage AGP[434]Rem. Yes XFree 4.3.0^[435]Rem. (savage) None N/A None N/A VIA 82C686 Yes driver Alsa^[436]Rem. Yes Brio BA410 (P1716A, P1721A, P1723A, P3270A, P3273A, P4873A) S3 Savage AGP[437]Rem. Yes XFree 4.3.0^[438]Rem. (savage) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 None N/A VIA 82C686 Yes driver Alsa^[439]Rem. Yes Brio BA410 (P2744A, P3274A, P3667A) nVidia GeForce 2 GTS AGP Yes XFree 4.3.0^[440]Rem. (nv ou nVidia drivers[441]Rem. ) None N/A None N/A VIA 82C686 Yes driver Alsa^[442]Rem. No Brio BA600 (D8770A, D8771A, D8772A, D8773A, D8778A, D8780A, D8783A, D8784A, D8785A, D8788A, D8789A, D8963A, D9070A, D9072A, D9080A, D9082A, D9085A, D9091A) Chipset BX[443]Rem. Matrox Productiva G200 AGP Yes XFree 4.3.0^[444]Rem. (mga) None N/A None N/A Cirrus Logic CS 4614 Yes driver Alsa^[445]Rem. Yes Brio BA600 (D8406A, D8774A, D8781A, D8787A, D8967A, D9075A) Chipset BX[446]Rem. Matrox Productiva G200 AGP Yes XFree 4.3.0^[447]Rem. (mga) ??? ??? None N/A Cirrus Logic CS 4614 Yes driver Alsa^[448]Rem. No Table 3-2. Vectra and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested Vectra xe310 (P5829A, P5833A, P5865B, P5881A, P5891A, P5902A, P5904A, P6014B, P6015B, P6016A, P6138A, P6138B, P7604B, P76005B, P7606B, P7612B, P7616B, P7619A, P7620A, P7621A, P7622A, P7623A, P7624A, P7625A, P8408A, P8409A, P8412A, P8413B, P8414B, P8415B, P8416B, P8417B, P8418B, P8419B, P8421A, P9581B, P9582B, P9583B) Intel i815 AGP[449]Rem. Yes XFree 4.3.0^[450]Rem. (i810) Intel PRO 10/100 BT Yes driver eepro100 or [451]e100 None N/A Intel 82810 Audio Yes driver Alsa^[452]Rem. Mandrake 8.1 Vectra xe310 (P6017B, P6137A, P7617B, P8410A) Intel i815 AGP[453]Rem. Yes XFree 4.3.0^[454]Rem. (i810) Intel PRO 10/100 BT Yes driver eepro100 or [455]e100 None N/A Intel 82810 Audio Yes driver Alsa^[456]Rem. Preload Mandrake 8.1 Vectra VE5 (D5592A, D5602A, D5603A, D5604A, D5606N, D5608A, D5612A, D5615A, D5618A, D5607A, D5617A) S3 Trio 64V2 PCI Yes XFree 3.3.6^[457]Rem. (S3) None N/A None N/A ??? ??? Yes Vectra VE7 (D6530A, D6531A, D6533A, D6610A, D6611A, D6615A, D6616A, D6613A) ATI Rage II C AGP Yes XFree 4.3.0^[458]Rem. (ati) None N/A None N/A ??? ??? Yes Vectra VE7 (D6532A, D6612A, D6617A, D6618A) ATI Rage II C AGP Yes XFree 4.3.0^[459]Rem. (ati) 3Com 905B-TX 10/100 BT[460]Rem. Yes driver 3c59x[461]Rem. None N/A ??? ??? Yes Vectra VE8 (D6550A, D6560A, D6570A, D6554A, D6584A, D6540A, D6541A, D6544A, D6543A, D6578A, D6573A, D6574A, D6580A,D6581A, D6584A, D6583A, D6593A, D6597A, D6598A) Chipset BX[462]Rem. Matrox Productiva G100 AGP[463]Rem. Yes XFree 4.3.0^[464]Rem. (mga) None N/A None N/A AZTEC 2320^[465]Rem. Yes driver Alsa^[466]Rem. Yes Vectra VE8 (D6552N, D6562N, D6565N, D6542A, D6572A, D6575A, D6582A, D6595A, D6582A, D6585N, D6599A) Chipset BX[467]Rem. Matrox Productiva G100 AGP[468]Rem. Yes XFree 4.3.0^[469]Rem. (mga) 3Com 905B-TX 10/100 BT[470]Rem. Yes driver 3c59x[471]Rem. None N/A AZTEC 2320^[472]Rem. Yes driver Alsa^[473]Rem. Yes Vectra VEi7 (D8112A, D8117A, D8121A, D8123A, D8124A, D8126A, D8128A, D8129A, D8131A, D8133A, D8134A, D8136A, D8138A, D8139A, D8141A, D8143A, D8144A, D8145A, D8148A, P1618A, P1619A) Sis 5595 AGP Yes XFree 4.3.0^[474]Rem. in Frame Buffer mode (FBDEV)[475]Rem. None N/A None N/A ??? ??? Yes Vectra VEi7 (D8118N, D8122A, D8127N, D8132A, D8137A, P1620A) Sis 5595 AGP Yes XFree 4.3.0^[476]Rem. in Frame Buffer mode (FBDEV)[477]Rem. 3Com 905B-TX 10/100 BT[478]Rem. Yes driver 3c59x[479]Rem. None N/A ??? ??? No Vectra VEi8 (D8166A, D8168A, D8151A, D8153A, D8155A, D8169A, D8171A, D8173A, D8174A, D8181A, D8183A, D8184A, D8186A, D8188A, D9784A, D9785A, D9786A, D9788A, D9791A, D9793A, P1626A, P1628A, P1633A) Matrox Productiva G200 AGP Yes XFree 4.3.0^[480]Rem. (mga) None N/A None N/A ??? ??? No Vectra VEi8 (D8167N, D8152N, D8172N, D8182N, D8187N, D9787N, D9789A, D9792N, P1627A) Matrox Productiva G200 AGP Yes XFree 4.3.0^[481]Rem. (mga) 3Com 905B-TX 10/100 BT[482]Rem. Yes driver 3c59x[483]Rem. None N/A ??? ??? No Vectra VL5 (D4552A, D4543A, D4554A, D4555A, D4556A, D4557A, D4558A, D4559A, D4560A, D4567A, D4562A, D4563A, D4572A, D4574A, D4576A, D4579A, D4577A) S3 Trio 64V2 PCI Yes XFree 3.3.6^[484]Rem. (S3) None N/A None N/A ??? ??? Yes Vectra VL6 Cirrus Logic GD 5446 PCI Yes XFree 4.3.0^[485]Rem. (cirrus) None N/A None N/A ??? ??? Yes Vectra VL6 Matrox Millenium II PCI Yes XFree 4.3.0^[486]Rem. (mga) None N/A None N/A ??? ??? No Vectra VL7 (D5710A, D5711N, D5725A, D5720A, D5721N, D5731N, D5797N, D5737A, D5799N) Cirrus Logic GD 5465 AGP[487]Rem. Yes XFree 4.3.0^[488]Rem. (cirrus) None N/A None N/A ??? ??? Yes Vectra VL7 (D5734N, D5729N, D5739N, D5728N, D5798N) Matrox Millenium II PCI Yes XFree 4.3.0^[489]Rem. (mga) None N/A None N/A ??? ??? No Vectra VL7 (D5724N, D5796N) Cirrus Logic GD 5465 AGP[490]Rem. Yes XFree 4.3.0^[491]Rem. (cirrus) AMD 79C971 KC 10/100 BT Yes driver pcnet32 None N/A ??? ??? No Vectra VL8 (D5880A, D5882A, D5890A, D5891A, D5893A, D5896A, D5898A, D5900A, D5902A, D6945A) Chipset BX[492]Rem. Matrox Productiva G100 AGP[493]Rem. Yes XFree 4.3.0^[494]Rem. (mga) None N/A None N/A ??? ??? No Vectra VL8 (D5881A, D5883A, D5894A, D5888A, D5892A) Chipset BX[495]Rem. Matrox Productiva G100 AGP[496]Rem. Yes XFree 4.3.0^[497]Rem. (mga) 3Com 905B-TX 10/100 BT[498]Rem. Yes driver 3c59x[499]Rem. None N/A ??? ??? No Vectra VL8 (D5887A) Chipset BX[500]Rem. Matrox Productiva G100 AGP[501]Rem. Yes XFree 4.3.0^[502]Rem. (mga) 3Com 905B-TX 10/100 BT[503]Rem. Yes driver 3c59x[504]Rem. ??? ??? ??? ??? No Vectra VL8 (D6944A) Chipset BX[505]Rem. Matrox Millenium G200 AGP Yes XFree 4.3.0^[506]Rem. (mga) None N/A None N/A ??? ??? No Vectra VL8 (D6940A, D6941A, D6942A) Chipset BX[507]Rem. Matrox Millenium G200 AGP Yes XFree 4.3.0^[508]Rem. (mga) 3Com 905B-TX 10/100 BT[509]Rem. Yes driver 3c59x[510]Rem. None N/A ??? ??? No Vectra VL8 (D6943A) Chipset BX[511]Rem. Matrox Millenium G200 AGP Yes XFree 4.3.0^[512]Rem. (mga) 3Com 905B-TX 10/100 BT[513]Rem. Yes driver 3c59x[514]Rem. Adaptec AIC 7880 UW PCI Yes driver aic7xxx[515]Rem. ??? ??? Yes Vectra VLi8 (D7941A, D7943A, D7945A, D7948A, D7951A, D7953A, D7955A, D7961A, D7963A, D7965A, D7958A, D7968A, D7969A, D7973A, D7976A, D9459A, D9460A, D9463A, D9467A, D9774A, D9810A, P1894A, P1898A) Matrox Millenium G200 AGP Yes XFree 4.3.0^[516]Rem. (mga) None N/A None N/A Cirrus Logic CS 4614 Yes driver Alsa^[517]Rem. Yes Vectra VLi8 (D7826A, D7836A, D7837A, D7846A, D7847A, D7848A, D7856A, D7857A, D7866A, D7867N, D7876A, D7877N, D7942A, D7949A, D7952A, D7959A, D7962A, D7969A, D7972A, D8696A, D8697A, D8950A, D9456A, D9457N, D9461A, D9462A, D9770N, D9771N, D9775A, D9778A, D9779N, D9809A, P1896A, P1899A) Matrox Millenium G200 AGP Yes XFree 4.3.0^[518]Rem. (mga) 3Com 905C-TX 10/100 BT Yes driver 3c59x[519]Rem. None N/A Cirrus Logic CS 4614 Yes driver Alsa^[520]Rem. Yes Vectra VL400 (D9815A, D9816A, D9817A, D9818A, D9819A, D9820A, D9821A, D9822A, D9824A, D9826A, D9828A, D9829A, D9830A, D9831A, D9833A, P1555A, P1556A, P1557A, P1558A, P1560A, P2260A, P2261A, P2266A, P2265A, P2778A, P2779A, P3351A, P3353A, P3389A, P3390A, P3391A, P3394A, P3614A, P3615A, P3616A, P3618A, P3687A, P3691A, P3694A, P3697A, P3698A, P3699A, P3700A, P3702A, P3704A, P3728A, P3730A, P3732A, P3733A, P3734A, P3735A, P3736A, P3737A, P3738A, P3739A, P3740A, P3743A, P3744A, P3745A, P3746A, P3747A, P4110A, P4116A, P4119A, P4120A, P4121A, P4128A, P4129A, P4130A, P4134A, P4136A, P4137A, P4138A, P4140A, P4352A, P4354A, P4355A, P4368A, P4369A, P4370A, P4371A, P4745A, P4746A, P4747A, P4748A, P4752A, P4753A, P5060A, P5069A, P5075A, P5120A, P5121A, P5123A, P5125A, P5126A, P5133A, P5144A, P5598A) Chipset i820^[521]Rem. Intel i815 AGP[522]Rem. Yes XFree 4.3.0^[523]Rem. (i810) 3Com 905C-TX 10/100 BT Yes driver 3c59x[524]Rem. None N/A Intel 82810 Audio Yes driver Alsa^[525]Rem. Yes Vectra VL400 (D9825A, D9827A, D9832A, D9834A, P1554A, P1559A, P1561A, P1562A, P3352A, P3384A, P3686A, P3701A, P3703A, P3617A, P3619A, P3688A, P3689A, P3690A, P3692A, P3693A, P3695A, P3696A, P4112N, P4113N, P4114N, P4115A, P4117A, P4118A, P4122A, P4123N, P4124N, P4125N, P4126N, P4127N, P4133A, P4356A, P4357A, P4358A, P4359A, P4360A, P4361A, P4362A, P4363A, P4364A, P4365A, P4366A, P4167A) Chipset i820^[526]Rem. Matrox Millenium G450D AGP[527]Rem. Yes XFree 4.3.0^[528]Rem. (mga) 3Com 905C-TX 10/100 BT Yes driver 3c59x[529]Rem. None N/A Intel 82810 Audio Yes driver Alsa^[530]Rem. RedHat 7.0 Vectra VL400 (P2257A) Chipset i820^[531]Rem. Matrox Millenium G400D AGP Yes XFree 4.3.0^[532]Rem. (mga) 3Com 905C-TX 10/100 BT Yes driver 3c59x[533]Rem. None N/A Intel 82810 Audio Yes driver Alsa^[534]Rem. No Vectra VL400 (P5083A) Chipset i820^[535]Rem. nVidia GeForce 2 GTS AGP Yes XFree 4.3.0^[536]Rem. (nv ou nVidia drivers[537]Rem. ) 3Com 905C-TX 10/100 BT Yes driver 3c59x[538]Rem. None N/A Intel 82810 Audio Yes driver Alsa^[539]Rem. No Vectra VL410 (D4768A, P5622A, P5957A, P5958A, P5958B, P5959A, P5960A, P5962A, P5963A, P5965B, P5967B, P5969A, P5970A, P5971A, P6096A, P6097A, P6098A, P7644B, P7645B, P7646A, P7647B, P7648B, P7651A, P7652B) Intel i815 AGP[540]Rem. Yes XFree 4.3.0^[541]Rem. (i810) Intel PRO 10/100 BT Yes driver eepro100 or [542]e100 None N/A Analog Device 1885 Yes driver AD1885 Mandrake 8.1 Vectra VL410 (P5961B, P5964A) nVidia GeForce 2 GTS AGP Yes XFree 4.3.0^[543]Rem. (nv ou nVidia drivers[544]Rem. ) Intel PRO 10/100 BT Yes driver eepro100 or [545]e100 None N/A Analog Device 1885 Yes driver AD1885 No Vectra VL410 (P7649B) Intel i815 AGP[546]Rem. Yes XFree 4.3.0^[547]Rem. (i810) Intel PRO 10/100 BT Yes driver eepro100 or [548]e100 None N/A Analog Device 1885 Yes driver AD1885 Preload Mandrake 8.1 Vectra VL420 (P5754A, P5755A, P5756A, P5757A, P5761A, P5762A, P5764A, P5765A, P5767A, P5769A, P5770A, P5956A, P5962A, P5967A, P5978A, P5985A, P5988A, P5991A, P5992A, P5993A, P7590A, P7591A, P7592A, P7593B, P7594B, P7602A, P7603A, P7631B, P7632B, P7633B, P7634B, P7637A, P8357A, P8358A, P8359A, P8361A, P8363B, P8367B, P8372B, P8374B, P8379B, P8380B, P8382A, P8383A, P8384A, P8434A, P8435A, P8436A, P8437A, P8438A) ATI Rage 128 AGP 8MB Yes XFree 4.3.0^[549]Rem. (ati) Intel PRO 10/100 BT Yes driver eepro100 or [550]e100 None N/A Analog Device 1885 Yes driver AD1885 Mandrake 8.1 Vectra VL420 (P7588A, P7589A, P8355A, P8356A, P8360A, P8378B, P8381B) nVidia TNT2 AGP Yes XFree 4.3.0^[551]Rem. (nv ou nVidia drivers[552]Rem. ) Intel PRO 10/100 BT Yes driver eepro100 or [553]e100 None N/A Analog Device 1885 Yes driver AD1885 Mandrake 8.1 Vectra VL420 (P7639A, P8375B) ATI Rage 128 AGP 8MB Yes XFree 4.3.0^[554]Rem. (ati) Intel PRO 10/100 BT Yes driver eepro100 or [555]e100 None N/A Analog Device 1885 Yes driver AD1885 Preload Mandrake 8.1 Vectra VL420 (P5760A, P5763A, P5766A, P5768A, P5986A, P5990A) nVidia GeForce 2 GTS AGP Yes XFree 4.3.0^[556]Rem. (nv ou nVidia drivers[557]Rem. ) Intel PRO 10/100 BT Yes driver eepro100 or [558]e100 None N/A Analog Device 1885 Yes driver AD1885 No Vectra VL600 (D9733A, D8643A, D8653A, D8657A, D8663A, D8667A, D9737A, D8647A, D8677A, P2780A, P3285A, P3288A) Chipset i820^[559]Rem. Matrox Millenium G250 AGP Yes XFree 4.3.0^[560]Rem. (mga) None N/A None N/A Cirrus Logic CS 4614 Yes driver Alsa^[561]Rem. No Vectra VL600 (D7543N, D8644N, D8648N, D8654N, D8658N, D8664N, D8668N, D8678A, D9734N, D9738N, P2786A, P3286N, P3289N, P3604N, P3705N) Chipset i820^[562]Rem. Matrox Millenium G250 AGP Yes XFree 4.3.0^[563]Rem. (mga) 3Com 905C-TX 10/100 BT Yes driver 3c59x[564]Rem. None N/A Cirrus Logic CS 4614 Yes driver Alsa^[565]Rem. No Vectra VL600 (D8635A, D8645A, D8649N, D8655A, D8659N, D8665A, D8669N, D8679N, D9735A, D9739N, P2787A, P3287A, P3290N, P3344N, P3345N, P3605N, P3606N, P3607N, P3608N, P3610N) Chipset i820^[566]Rem. Matrox Millenium G400D AGP Yes XFree 4.3.0^[567]Rem. (mga) 3Com 905C-TX 10/100 BT Yes driver 3c59x[568]Rem. None N/A Cirrus Logic CS 4614 Yes driver Alsa^[569]Rem. Yes Vectra VL600 (P3609N) Chipset i820^[570]Rem. Matrox Millenium G450D AGP[571]Rem. Yes XFree 4.3.0^[572]Rem. (mga) 3Com 905C-TX 10/100 BT Yes driver 3c59x[573]Rem. None N/A Cirrus Logic CS 4614 Yes driver Alsa^[574]Rem. No Vectra VL600 (D8656N) Chipset i820^[575]Rem. Matrox Millenium G250 AGP Yes XFree 4.3.0^[576]Rem. (mga) None N/A ??? ??? Cirrus Logic CS 4614 Yes driver Alsa^[577]Rem. No Vectra VL800 (P2059A, P2074A, P2076A, P2077A, P2078A, P2080A, P2693A, P3631A, P3633A, P3634A, P3635A, P3637A, P3638A, P3643A, P3644A, P8396A) P4 Chipset i850^[578]Rem. Matrox Millenium G450D AGP[579]Rem. Yes XFree 4.3.0^[580]Rem. (mga) 3Com 905C-TX 10/100 BT Yes driver 3c59x[581]Rem. None N/A Cirrus Logic CS 4299 Yes driver cs4299 No Vectra VL800 (P2057A, P2060A, P2075A, P2079A, P2081A, P2694A, P2695A, P3632A, P3636A, P3642A, P5995A, P5996A, P5999A, P6001B, P6003A, P6005B, P8393A, P8394A, P8395A) P4 Chipset i850^[582]Rem. nVidia GeForce 2 GTS AGP Yes XFree 4.3.0^[583]Rem. (nv ou nVidia drivers[584]Rem. ) 3Com 905C-TX 10/100 BT Yes driver 3c59x[585]Rem. None N/A Cirrus Logic CS 4299 Yes driver cs4299 RedHat 7.1 Vectra VL800 (P2696A, P2697A, P3642A) P4 Chipset i850^[586]Rem. nVidia GeForce 2 GTS AGP Yes XFree 4.3.0^[587]Rem. (nv ou nVidia drivers[588]Rem. ) 3Com 905C-TX 10/100 BT Yes driver 3c59x[589]Rem. None N/A Sound Blaster Live! Yes driver emu10k1^[590]Rem. No Vectra VL800 (P2058A, P3223A, P3224A, P3225A, P3226A, P3640A, P5994A, P5997A, P5998A, P6002B) P4 Chipset i850^[591]Rem. ATI Rage 128 AGP 8MB Yes XFree 4.3.0^[592]Rem. (ati) 3Com 905C-TX 10/100 BT Yes driver 3c59x[593]Rem. None N/A Cirrus Logic CS 4299 Yes driver cs4299 No Vectra VL800 (P3639A, P6000A) P4 Chipset i850^[594]Rem. ATI Rage 128 AGP 8MB Yes XFree 4.3.0^[595]Rem. (ati) 3Com 905C-TX 10/100 BT Yes driver 3c59x[596]Rem. None N/A Cirrus Logic CS 4299 Yes driver cs4299 Preload Mandrake 8.0, 8.1 Vectra XA (D3986A, D3989A, D3990A, D3991A, D3993A, D4770N, D4771N, D4773N, D4774N, D3994N, D3995N, D4776N) Matrox Millenium II PCI Yes XFree 4.3.0^[597]Rem. (mga) AMD 79C971 KC 10/100 BT Yes driver pcnet32 None N/A ??? ??? No Vectra XA (D4777A) Matrox Millenium II PCI Yes XFree 4.3.0^[598]Rem. (mga) AMD 79C971 KC 10/100 BT Yes driver pcnet32 Adaptec AIC 7880 UW PCI Yes driver aic7xxx[599]Rem. ??? ??? Yes A page on certification of Mandrake, TurboLinux, SuSE and Redhat Linux distributions on HP EVO is available at [600]http://www.compaq.com/products/servers/linux/clientscert.html The table here after gives information on machines available after the HP/Compaq merge (May 2002). Table 3-3. EVO and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested EVO D310 (P9539A, P9540A, P9541A, P9548A, P9549A, P9550A, P9551A, P9553A, X1003A, X1004A, X1005A, X1009A, X1011A, X1013A, X1014A, X1015A, X1019A, X1040A, X1041A, X1042A, X1062A, X1067A) Intel i845G/E AGP[601]Rem. Yes XFree 4.3.0^[602]Rem. (i810) Intel PRO 10/100 BT Yes driver eepro100 or [603]e100 None N/A ADI 1981 ??? No EVO D310 (X1017A, X1018A) Intel i845G/E AGP[604]Rem. Yes XFree 4.3.0^[605]Rem. (i810) Intel PRO 10/100 BT Yes driver eepro100 or [606]e100 None N/A ADI 1981 ??? Linux Preload EVO D510 (X1021A, X1022A, X1023A, X1025A, X1026A, X1027A, X1029A, X1030A, X1031A, X1091A) Intel i845G/E AGP[607]Rem. Yes XFree 4.3.0^[608]Rem. (i810) Intel PRO 10/100 BT Yes driver eepro100 or [609]e100 None N/A ADI 1981 ??? RedHat 7.3, 8.0 EVO D510 (X1038A, X1039A) Intel i845G/E AGP[610]Rem. Yes XFree 4.3.0^[611]Rem. (i810) Intel PRO 10/100 BT Yes driver eepro100 or [612]e100 None N/A ADI 1981 ??? Linux Preload Table 3-4. e-PC and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested e-Vectra (D9896T, D9897T, D9898T, D9899T, P2024T, P2025T, P2027T, P2706T, P2707T) Intel i810 AGP[613]Rem. Yes XFree 4.3.0^[614]Rem. (i810) 3Com 905C-TX 10/100 BT Yes driver 3c59x[615]Rem. None N/A Intel 82810 Audio Yes driver Alsa^[616]Rem. Yes e-PC (P2321A, P2760A, P2761A, P2763A, P2765A, P2791A, P2792A, P2793A, P2794A, P2795A, P3355A, P3362A, P4229A, P4230A, P4256A, P4265A, P4266A, P4269A, P4271A, P4272A, P4273A, P4274A, P4278A, P4941A, P4946A, P4949A) Intel i810 AGP[617]Rem. Yes XFree 4.3.0^[618]Rem. (i810) 3Com 905C-TX 10/100 BT Yes driver 3c59x[619]Rem. None N/A Intel 82810 Audio Yes driver Alsa^[620]Rem. RedHat 7.0 e-PC 40 (P4315A, P4327A, P4328A, P4329A, P5802A, P5809A, P5810A, P5811A, P5812A, P5813A, P5814A, P6034A, P6040A, P6041A, P6043A, P6044A, P6045B, P6046A, P6047B) Intel i815 AGP[621]Rem. Yes XFree 4.3.0^[622]Rem. (i810) Intel PRO 10/100 BT Yes driver eepro100 or [623]e100 None N/A Intel 82810 Audio Yes driver Alsa^[624]Rem. RedHat 7.1, Mandrake 8.0^[625]Rem., 8.1, SuSE 7.2 e-PC 42 (P7554A, P7555A, P7556A, P7566A, P7567A, P7568A, P7569A, P7570B, P7571B, P7572A, P7573A, P7574B, P7575A, P7576A, P9569A, P9570A) ATI Rage 128 AGP 8MB Yes XFree 4.3.0^[626]Rem. (ati) Intel PRO 10/100 BT Yes driver eepro100 or [627]e100 None N/A Intel 82810 Audio Yes driver Alsa^[628]Rem. Mandrake 8.2 Table 3-5. Kayak and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested Kayak XA (D4792A, D4795N) Cirrus Logic GD 5465 AGP[629]Rem. Yes XFree 4.3.0^[630]Rem. (cirrus) None N/A None N/A ??? ??? No Kayak XA (D4807N, D4796N, D6491N, D6492N, D4806N, D4808N, D6493N) Cirrus Logic GD 5465 AGP[631]Rem. Yes XFree 4.3.0^[632]Rem. (cirrus) AMD 79C971 KC 10/100 BT Yes driver pcnet32 None N/A ??? ??? Yes Kayak XA (D4798N, D6490N, D4799N, D4803N, D6494N) Cirrus Logic GD 5465 AGP[633]Rem. Yes XFree 4.3.0^[634]Rem. (cirrus) AMD 79C974 KC 10/100 BT + SCSI Yes driver pcnet32 Symbios Logic 8751SP with network card Yes driver ncr53c8xx[635]Rem. Analog Device 1816 Yes driver AD1816^[636]Rem. Yes Kayak XA (D4796S, D6493S) Matrox Millenium II AGP Yes XFree 4.3.0^[637]Rem. (mga) None N/A None N/A ??? ??? No Kayak XA (D4803S) Matrox Millenium II AGP Yes XFree 4.3.0^[638]Rem. (mga) AMD 79C974 KC 10/100 BT + SCSI Yes driver pcnet32 Symbios Logic 8751SP with network card Yes driver ncr53c8xx[639]Rem. ??? ??? No Kayak XA (D6720N, D6721N, D6723N, D6726N, D6724N, D6730N, D6731N, D6735N, D6736N, D6738N, D6739N, D7994N) Matrox Millenium G200 AGP Yes XFree 4.3.0^[640]Rem. (mga) None N/A None N/A AZTEC 2320^[641]Rem. Yes driver Alsa^[642]Rem. No Kayak XA (D6722N, D6729N, D6734N) Elsa Gloria Synergy + AGP[643]Rem. Yes XFree 4.3.0^[644]Rem. (glint) None N/A None N/A ??? ??? Yes Kayak XA (D6725N, D6732N, D6737N, D7993N) Matrox Millenium G200 AGP Yes XFree 4.3.0^[645]Rem. (mga) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[646]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) Yes driver ncr53c8xx[647]Rem. ??? ??? Yes Kayak XA (D6727N) Elsa Gloria Synergy + AGP[648]Rem. Yes XFree 4.3.0^[649]Rem. (glint) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[650]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) Yes driver ncr53c8xx[651]Rem. ??? ??? No Kayak XA (D6728N, D6733N) Accel Galaxy AGP Yes XFree 4.3.0^[652]Rem. in Frame Buffer mode (FBDEV)[653]Rem. Not interesting None N/A None N/A ??? ??? No Kayak XA-s (D5751N, D5752N, D5753N, D5755N, D5754N, D5756N, D5759N) Chipset BX[654]Rem. Matrox Productiva G100 AGP[655]Rem. Yes XFree 4.3.0^[656]Rem. (mga) None N/A None N/A ??? ??? No Kayak XA-s (D5757N, D5758N) Chipset BX[657]Rem. Matrox Productiva G100 AGP[658]Rem. Yes XFree 4.3.0^[659]Rem. (mga) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[660]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) Yes driver ncr53c8xx[661]Rem. ??? ??? Yes Kayak XA-s (D5765N, D5763N, D5766N, D5769N, D7982N, D7986N, D7991N, D7987N) Chipset BX[662]Rem. Matrox Productiva G200 AGP Yes XFree 4.3.0^[663]Rem. (mga) None N/A None N/A ??? ??? Yes Kayak XA-s (D5768N, D5767N) Chipset BX[664]Rem. Matrox Productiva G200 AGP Yes XFree 4.3.0^[665]Rem. (mga) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[666]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) Yes driver ncr53c8xx[667]Rem. ??? ??? No Kayak XA-s (D5762N, D7984N, D7988N) Chipset BX[668]Rem. Elsa Gloria Synergy + AGP[669]Rem. Yes XFree 4.3.0^[670]Rem. (glint) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[671]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) Yes driver ncr53c8xx[672]Rem. ??? ??? Yes Kayak XA-s (D5764N, D7983N, D7989N) Chipset BX[673]Rem. Accel Galaxy AGP Yes XFree 4.3.0^[674]Rem. in Frame Buffer mode (FBDEV)[675]Rem. Not interesting AMD 79C971 KC 10/100 BT + SCSI (D6692A)[676]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) Yes driver ncr53c8xx[677]Rem. ??? ??? No Kayak XA-s (D7990N) Chipset BX[678]Rem. Matrox Productiva G100 AGP[679]Rem. Yes XFree 4.3.0^[680]Rem. (mga) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[681]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) Yes driver ncr53c8xx[682]Rem. ??? ??? No Kayak XA-s (D7992N) Chipset BX[683]Rem. Elsa Gloria Synergy II AGP Yes XFree 4.3.0^[684]Rem. (glint) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[685]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) Yes driver ncr53c8xx[686]Rem. Analog Device 1816 Yes driver AD1816^[687]Rem. Yes Kayak XM600 (D9531N, D9533N, D9535N, D9541N, D9549N, D9552N, D9553N, D9555N, D9556N, D9557N, D9559N, P1642N, P1645N, P1653N, P1655N, P1658N, P2055N, P2191N, P2202N) Matrox Millenium G250 AGP Yes XFree 4.3.0^[688]Rem. (mga) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 None N/A Cirrus Logic CS 4614 Yes driver Alsa^[689]Rem. No Kayak XM600 (P1650N, P1652N, P1656N) Matrox Millenium G250 AGP Yes XFree 4.3.0^[690]Rem. (mga) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[691]Rem. Cirrus Logic CS 4614 Yes driver Alsa^[692]Rem. No Kayak XM600 (D8350N, D9554N, D9558N) [693]Rem. Matrox Millenium G250 AGP Yes XFree 4.3.0^[694]Rem. (mga) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 None N/A Cirrus Logic CS 4614 Yes driver Alsa^[695]Rem. No Kayak XM600 (P2054N) [696]Rem. Matrox Millenium G400D AGP Yes XFree 4.3.0^[697]Rem. (mga) None N/A None N/A Cirrus Logic CS 4614 Yes driver Alsa^[698]Rem. No Kayak XM600 (D9563N) Matrox Millenium G400D AGP Yes XFree 4.3.0^[699]Rem. (mga) None N/A None N/A Cirrus Logic CS 4614 Yes driver Alsa^[700]Rem. No Kayak XM600 (D9536N, D9537N, D9538N, D9544N, D9548N, P1646N, P1648N, P2192N, P2193N, P2203N, P2204N, P2204N, P2192N, P2193N) Matrox Millenium G400D AGP Yes XFree 4.3.0^[701]Rem. (mga) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 None N/A Cirrus Logic CS 4614 Yes driver Alsa^[702]Rem. No Kayak XM600 (D9539N, D9565N, P1651N, P1657N, P2190N, P2194N) Matrox Millenium G400D AGP Yes XFree 4.3.0^[703]Rem. (mga) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[704]Rem. Cirrus Logic CS 4614 Yes driver Alsa^[705]Rem. No Kayak XM600 (D9550N, D9567N) Elsa Gloria Synergy II AGP Yes XFree 4.3.0^[706]Rem. (glint) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 None N/A Cirrus Logic CS 4614 Yes driver Alsa^[707]Rem. Yes Kayak XM600 (D9534N, D9540N, D9543N, D9546N, D9564N, P1644N, P1647N, P1649N, P2053N, P2056N, P2195N, P2210N, P2211N) Elsa Gloria Synergy II AGP Yes XFree 4.3.0^[708]Rem. (glint) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[709]Rem. Cirrus Logic CS 4614 Yes driver Alsa^[710]Rem. Yes Kayak XM600 (D9545N, D8366N) 3DLabs Oxygen GVX1 AGP Yes XFree 4.3.0^[711]Rem. in Frame Buffer mode (FBDEV)[712]Rem. SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[713]Rem. Cirrus Logic CS 4614 Yes driver Alsa^[714]Rem. Yes Kayak XU (D4691N, D4692N, D4695N, D4701N, D4693N, D4694N, D4702N, D4705N) Matrox Millenium II PCI Yes XFree 4.3.0^[715]Rem. (mga) AMD 79C971 KC 10/100 BT Yes driver pcnet32 Adaptec AIC 7860 PCI + Adaptec AIC 7880 UW PCI Yes driver aic7xxx[716]Rem. ??? ??? Yes Kayak XU (D5680N, D5682N, D5683N, D5684N) Chipset BX[717]Rem. Matrox Millenium II PCI Yes XFree 4.3.0^[718]Rem. (mga) AMD 79C971 KC 10/100 BT Yes driver pcnet32 Adaptec AIC 7860 PCI + Adaptec AIC 7880 UW PCI Yes driver aic7xxx[719]Rem. Analog Device 1816 Yes driver AD1816^[720]Rem. Yes Kayak XU (D5702, D5704, D5686N, D6336N, D6348N, D8431N, D8920N) Matrox Millenium G200 AGP Yes XFree 4.3.0^[721]Rem. (mga) AMD 79C972 10/100 BT + SCSI (D6692A)[722]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) + Adaptec AIC 7880 PCI Yes driver ncr53c8xx and driver aic7xxx ??? ??? Yes Kayak XU (D5687N, D6333N, D6334N, D8432N, D6345N, D8923N) Elsa Gloria Synergy + AGP[723]Rem. Yes XFree 4.3.0^[724]Rem. (glint) AMD 79C972 10/100 BT + SCSI (D6692A)[725]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) + Adaptec AIC 7880 PCI Yes driver ncr53c8xx and driver aic7xxx ??? ??? No Kayak XU (D6337N, D6346N) Accel Galaxy AGP Yes XFree 4.3.0^[726]Rem. in Frame Buffer mode (FBDEV)[727]Rem. Not interesting AMD 79C972 10/100 BT + SCSI (D6692A)[728]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) + Adaptec AIC 7880 PCI Yes driver ncr53c8xx and driver aic7xxx ??? ??? No Kayak XU (D6347N) Matrox Productiva G100 AGP[729]Rem. Yes XFree 4.3.0^[730]Rem. (mga) AMD 79C972 10/100 BT + SCSI (D6692A)[731]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) + Adaptec AIC 7880 PCI Yes driver ncr53c8xx and driver aic7xxx ??? ??? No Kayak XU (D8924N) Matrox Millenium G400D AGP Yes XFree 4.3.0^[732]Rem. (mga) AMD 79C972 10/100 BT + SCSI (D6692A)[733]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) + Adaptec AIC 7880 PCI Yes driver ncr53c8xx and driver aic7xxx ??? ??? No Kayak XU700 (A7185C) Matrox Millenium G450D AGP[734]Rem. Yes XFree 4.3.0^[735]Rem. (mga) ??? ??? None N/A ??? ??? No Kayak XU700 (A7186C) Matrox Millenium G450D AGP[736]Rem. Yes XFree 4.3.0^[737]Rem. (mga) ??? ??? ??? ??? ??? ??? No Kayak XU800 (D8019N) [738]Rem. Matrox Millenium G250 AGP Yes XFree 4.3.0^[739]Rem. (mga) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 None N/A Cirrus Logic CS 4614 Yes driver Alsa^[740]Rem. No Kayak XU800 (D8021N, P1586N, P1661N) [741]Rem. Matrox Millenium G400D AGP Yes XFree 4.3.0^[742]Rem. (mga) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 None N/A Cirrus Logic CS 4614 Yes driver Alsa^[743]Rem. No Kayak XU800 (D8000N, D8001N) [744]Rem. [745]Rem. Matrox Millenium G250 AGP Yes XFree 4.3.0^[746]Rem. (mga) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[747]Rem. Cirrus Logic CS 4614 Yes driver Alsa^[748]Rem. No Kayak XU800 (D8002N, D8010N, D8016N, P1585N, P1589N, P1663N, P1664N, P1668N) [749]Rem. Matrox Millenium G250 AGP Yes XFree 4.3.0^[750]Rem. (mga) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[751]Rem. Cirrus Logic CS 4614 Yes driver Alsa^[752]Rem. No Kayak XU800 (D8003N, D8006N, D8012N, P1587N, P1665N, P1669N) [753]Rem. Matrox Millenium G400D AGP Yes XFree 4.3.0^[754]Rem. (mga) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[755]Rem. Cirrus Logic CS 4614 Yes driver Alsa^[756]Rem. Yes Kayak XU800 (P1667N) [757]Rem. [758]Rem. Matrox Millenium G400D AGP Yes XFree 4.3.0^[759]Rem. (mga) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[760]Rem. Cirrus Logic CS 4614 Yes driver Alsa^[761]Rem. No Kayak XU800 (D8007N, D8013N, D8020N, D8022N, P1588N, P1590N, P1662N, P3220N, P3221N) [762]Rem. Elsa Gloria Synergy II AGP Yes XFree 4.3.0^[763]Rem. (glint) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[764]Rem. Cirrus Logic CS 4614 Yes driver Alsa^[765]Rem. No Kayak XU800 (D8009N, D8015N) [766]Rem. 3DLabs Oxygen GVX1 AGP Yes XFree 4.3.0^[767]Rem. in Frame Buffer mode (FBDEV)[768]Rem. SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[769]Rem. Cirrus Logic CS 4614 Yes driver Alsa^[770]Rem. Yes Kayak XW (D6475N) Elsa Gloria Synergy[771]Rem. Yes XFree 4.3.0^[772]Rem. (glint) AMD 79C971 KC 10/100 BT Yes driver pcnet32 Adaptec AIC 7860 PCI + Adaptec AIC 7880 UW PCI Yes driver aic7xxx[773]Rem. ??? ??? No Kayak XW (D5505N, D5507N, D5509N) Accel Eclipse PCI Yes XFree 4.3.0^[774]Rem. in Frame Buffer mode (FBDEV)[775]Rem. Not interesting AMD 79C971 KC 10/100 BT Yes driver pcnet32 Adaptec AIC 7860 PCI + Adaptec AIC 7880 UW PCI Yes driver aic7xxx[776]Rem. ??? ??? No Kayak XW (D5510N, D5514N, D6485N) HP Fx-4 AGP Yes HP X Server[777]Rem. AMD 79C971 KC 10/100 BT Yes driver pcnet32 Adaptec AIC 7860 PCI + Adaptec AIC 7880 UW PCI Yes driver aic7xxx[778]Rem. ??? ??? No Kayak XW (D6480N, D6481N, D6482N) Chipset BX[779]Rem. Accel Eclipse PCI Yes XFree 4.3.0^[780]Rem. in Frame Buffer mode (FBDEV)[781]Rem. Not interesting ??? ??? ??? ??? ??? ??? No Kayak XW (D6797N) HP Fx-6 AGP Yes HP X Server[782]Rem. ??? ??? ??? ??? ??? ??? No Kayak XW (D6486N, D6487N, D6488N) Chipset BX[783]Rem. HP Fx-4 AGP Yes HP X Server[784]Rem. ??? ??? ??? ??? ??? ??? No The health monitoring system HP Kayak Maxilife, available on the whole Kayak range, is supported by Linux with the tool [785]Lm_sensors _________________________________________________________________ 3.2.1.2. Desktop computer accessories The following table provides all information on the support for this hardware by Linux. Table 3-6. Desktop computer accessories Reference Card type Chipset Linux support Tested D1553A Extension ISA Slots Extension kit Yes Yes D5480A FastRaid Card Adaptec ARO Raidport No No D6690A FastRaid Card Adaptec ARO Raidport No No D6951A SCSI Card Adaptec AIC 7880 UW PCI Yes driver aic7xxx[786]Rem. Yes D9528A SCSI Card Symbios Logic 8952U Ultra2 Wide PCI ??? No D9529A SCSI Card Symbios Logic 53C895 PCI Yes driver ncr53c8xx[787]Rem. Yes D9663A SCSI Card Symbios Logic 53C895 PCI Yes driver ncr53c8xx[788]Rem. Yes D9561A SCSI Card ??? ??? No P2280A SCSI Card Adaptec AIC 29160 PCI Yes driver aic7xxx[789]Rem. No C7474A SCSI Card Adaptec AIC 29160 PCI Yes driver aic7xxx[790]Rem. Yes D6936A Network Card AMD 79C972 AKC 10/100 BT Yes driver pcnet32 Yes D7504A Network Card 3Com 905B-TX 10/100 BT[791]Rem. Yes driver 3c59x[792]Rem. Yes D7506A Network Card Intel PRO 10/100 BT Yes driver eepro100 or [793]e100 No D7508A Network Card ??? ??? No D7522A Network Card 3Com 905C-TX 10/100 BT Yes driver 3c59x[794]Rem. Yes D7531A Network Card card HP chipset RealTek Yes driver RealTek Yes D6657A Sound Card ??? ??? No D5183A Sound Card ??? ??? No P1552A Video Card Matrox Millenium G250 AGP Yes XFree 4.3.0^[795]Rem. (mga) Yes D9521A Video Card Matrox Millenium G400D AGP Yes XFree 4.3.0^[796]Rem. (mga) Yes D9509A, D9522A, D9522B Video Card Elsa Gloria Synergy II AGP Yes XFree 4.3.0^[797]Rem. (glint) Yes D9523A Video Card 3DLabs Oxygen GVX1 AGP Yes XFree 4.3.0^[798]Rem. in Frame Buffer mode (FBDEV)[799]Rem. Yes P1971A, P2289A (MX) Video Card nVidia GeForce 2 GTS AGP Yes XFree 4.3.0^[800]Rem. (nv ou nVidia drivers[801]Rem. ) No P5106A Video Card nVidia GeForce 3 AGP Yes XFree 4.3.0^[802]Rem. (nv ou nVidia drivers[803]Rem. ) No CD-ROM, DVD and ZIP drives are supported by Linux kernel. Read the various HOWTO for their use, following the interface type. _________________________________________________________________ 3.2.1.3. The workstation range (Visualize, HP workstation) Visualize systems come in two flavors: the p and x class systems are preinstalled, supported, and configured with Windows; the pl and xl class systems are preinstalled, supported, and configured with Linux. There is no hardware difference between the base systems, but the Linux image that is preinstalled on the pl and xl is customized so that all drivers for the systems are preconfigured -- there's no need to specify or tune the box and drivers. Table 3-7. Visualize and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested Visualize P (A1296A, A5015A) Chipset BX[804]Rem. Elsa Gloria Synergy + AGP[805]Rem. Yes XFree 4.3.0^[806]Rem. (glint) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[807]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) Yes driver ncr53c8xx[808]Rem. Analog Device 1816 Yes driver AD1816^[809]Rem. RedHat 6.0, 6.1 Visualize P (A1296A, A5015A) Chipset BX[810]Rem. Elsa Gloria Synergy II AGP Yes XFree 4.3.0^[811]Rem. (glint) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[812]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) Yes driver ncr53c8xx[813]Rem. Analog Device 1816 Yes driver AD1816^[814]Rem. RedHat 6.0, 6.1 Visualize P (A6034A, A6038A) Elsa Gloria Synergy II AGP Yes XFree 4.3.0^[815]Rem. (glint) Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [816]e100 Adaptec AIC 7892 PCI Yes driver aic7xxx[817]Rem. Cirrus Logic CS 4280 Yes driver Alsa^[818]Rem. RedHat 6.2 Visualize P (A6034A, A6038A) HP Fx-5 AGP Yes HP X Server[819]Rem. Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [820]e100 Adaptec AIC 7892 PCI Yes driver aic7xxx[821]Rem. Cirrus Logic CS 4280 Yes driver Alsa^[822]Rem. RedHat 6.2 Visualize P (A6034A, A6038A) HP Fx-10 AGP Yes HP X Server[823]Rem. Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [824]e100 Adaptec AIC 7892 PCI Yes driver aic7xxx[825]Rem. Cirrus Logic CS 4280 Yes driver Alsa^[826]Rem. RedHat 6.2 Visualize X (A1297A, A5014A) Chipset BX[827]Rem. Elsa Gloria Synergy + AGP[828]Rem. Yes XFree 4.3.0^[829]Rem. (glint) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[830]Rem. Yes driver pcnet32 Symbios Logic 53c875 with network card (D6692A) Yes driver ncr53c8xx[831]Rem. Analog Device 1816 Yes driver AD1816^[832]Rem. RedHat 6.0 Visualize X (A1280A, A6020A) Elsa Gloria Synergy II AGP Yes XFree 4.3.0^[833]Rem. (glint) Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [834]e100 Adaptec AIC 7892 PCI Yes driver aic7xxx[835]Rem. Cirrus Logic CS 4280 Yes driver Alsa^[836]Rem. RedHat 6.2 Visualize X (A1280A, A6020A) HP Fx-5 AGP Yes HP X Server[837]Rem. Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [838]e100 Adaptec AIC 7892 PCI Yes driver aic7xxx[839]Rem. Cirrus Logic CS 4280 Yes driver Alsa^[840]Rem. RedHat 6.2 Visualize X (A1280A, A6020A) HP Fx-10 AGP Yes HP X Server[841]Rem. Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [842]e100 Adaptec AIC 7892 PCI Yes driver aic7xxx[843]Rem. Cirrus Logic CS 4280 Yes driver Alsa^[844]Rem. RedHat 6.2 A page dedicated to these machines and their support under Linux is available at the following address : [845]http://www.hp.com/workstations/products/linux/index.html A page of questions and answers on these machines is also available at the following address : [846]http://www.hp.com/visualize/programs/news/archive/qa1.html In particular, it's recommended to use a kernel 2.2.16 at least to support correctly the SCSI controller of these machines. A beta X server for the FX2+, FX4+ and FX6+ cards is available at the following address : [847]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/hpfx6_beta.ta r.gz and [848]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/hpfx6_beta_ke rnel.tar.gz(original: [849]http://www.hp.com/workstations/support/software/drivers/linux/vid eo/fxvideo/fx6/driver.html?) An X server for the FX5 and FX10 cards is available at the following address : [850]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/hpgraphics-1. 5.13-1.i386.rpm and [851]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/hpgraphics_ke rnel-1.5.13-1.src.rpm (original: [852]http://www.hp.com/workstations/support/software/drivers/linux/vid eo/fxvideo/fx10/index.html) Following infos come from Michael Corral: You can use the XFree86 X server included with Red Hat to do the install, but you won't want to use it permanently. It detects the fx10 card as a Matrox Millenium G200 with 2MB SDRAM. So you can only do 1024x768 at 16-bit color, and there will be some screen corruption (windows partially blacked out, incomplete re-drawing, etc). The monitor was a 21" HP P1110, model D2847, which the install had an entry for. So I decided to try HP's X server for this card. I got two RPM's from HP's site: the hpgraphics X server RPM and the hpgraphics-kernel source RPM. I installed the hpgraphics package and ran /usr/X11R6/hp/bin/FXconfig.sh, then rebooted. When it came back up, the hpgraphics module could not be loaded, so it defaulted back to the XFree86 X server. The problem is that the modules available from HP's site are compiled against specific kernels. Red Hat 7.2 ships kernel 2.4.7-10, so I had to compile and install the hpgraphics kernel source module. The instructions from HP worked, the "make install" put the module in the right place for my 2.4.7-10 SMP-enabled kernel. I switched to runlevel 3 and ran startx, the HP X server then came up in 1280x1024 at 24-bit color. I then discovered a few things about HP's X server. According to HP, runlevel 5 is not supported by the HP X server with Red Hat 7.1. And sure enough it didn't work with Red Hat 7.2 using gdm as the display manager. But when I tried it with xdm, it worked. It also worked with wdm. So it appears that gdm has something in it that HP's X server doesn't like. Just change /etc/inittab to use a different display manager in runlevel 5. I then discovered something else, which may possibly be related to this. It has to do with fonts. When I ran the nedit text editor before installing HP's X server, it was fine. But under HP's X server, all the menu fonts did not get detected, the characters showed up as dotted squares. Some other apps had the same problem. In fact, the Theme Selecter under GNOME had the same problem when trying to preview some of the installed themes. It took me a while, but I finally found the cause of this. When you install the 75dpi and/or 100dpi fonts that come with Red Hat 7.2, fonts in the iso10646 multi-byte character set get installed, in addition to the usual iso8859-* character sets. XFree86 apparently will try and use the iso8859 fonts first, which any app should be able to use. But HP's X server will try and use the iso10646 fonts, which some apps apparently do not recognize. I tested this with nedit, which has a command-line option for using standard X resources. Namely, I used this: nedit -xrm "nedit*fontList:name_of_some_font". If I used an iso10646 font, I got the dotted squares. But if I used any iso8859 font, it was fine. So what I did to fix this was to make all those iso10646 unavailable to the X server. I removed all references to those fonts in the /usr/X11R6/lib/X11/fonts/75dpi/fonts.dir file and changed the number at the top of that file accordingly (it was 1885, and there were 186 iso10646 fonts listed, so the new number became 1699). I did the same for the 100dpi fonts and restarted the X server. Bingo! That fixed the problem. Note that I didn't remove the fonts themselves, just the references to them in the fonts.dir files. Everything worked fine, and when I upgraded to kernel 2.4.17 and recompiled the hpgraphics kernel module and installed it, everything still worked fine. Overall, I am very pleased with it. Table 3-8. HP workstation and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested X1000 (A8063A), X1100 (A8073A, A8116A) None N/A Intel PRO 10/100 BT Yes driver eepro100 or [853]e100 None N/A Cirrus Logic CS 4299 Yes driver cs4299 No X1100 (A7867A) None N/A Intel PRO 10/100 BT Yes driver eepro100 or [854]e100 Adaptec AIC 7892 PCI Yes driver aic7xxx[855]Rem. Cirrus Logic CS 4299 Yes driver cs4299 No X1000 (A7778A), X1100 (A7863A) Matrox Millenium G450D AGP[856]Rem. Yes XFree 4.3.0^[857]Rem. (mga) Intel PRO 10/100 BT Yes driver eepro100 or [858]e100 None N/A Cirrus Logic CS 4299 Yes driver cs4299 No X1000 (A7779A, A7780A), X1100 (A7864A, A7865A, A7866A) nVidia Quadro2 Pro AGP Yes XFree 4.3.0^[859]Rem. (nv ou nVidia drivers[860]Rem. ) Intel PRO 10/100 BT Yes driver eepro100 or [861]e100 Adaptec AIC 7892 PCI Yes driver aic7xxx[862]Rem. Cirrus Logic CS 4299 Yes driver cs4299 No X1100 (A8697A) None N/A SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 None N/A Cirrus Logic CS 4299 Yes driver cs4299 No X1100 (A8674A, A8677A, A8679A) nVidia Quadro2 EX AGP Yes XFree 4.3.0^[863]Rem. (nv ou nVidia drivers[864]Rem. ) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 None N/A Cirrus Logic CS 4299 Yes driver cs4299 No X1100 (A8698A) nVidia Quadro2 EX AGP Yes XFree 4.3.0^[865]Rem. (nv ou nVidia drivers[866]Rem. ) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Adaptec AIC 7892 PCI Yes driver aic7xxx[867]Rem. Cirrus Logic CS 4299 Yes driver cs4299 No X1100 (A8071A, A8675A, A8696A) ATI Radeon 7000 AGP No SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 None N/A Cirrus Logic CS 4299 Yes driver cs4299 No X1100 (A8676A, A8700A) ATI fireGL8800 AGP No SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 None N/A Cirrus Logic CS 4299 Yes driver cs4299 No X1100 (A8072A, A8680A, A8699A) ATI fireGL8800 AGP No SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Adaptec AIC 7892 PCI Yes driver aic7xxx[868]Rem. Cirrus Logic CS 4299 Yes driver cs4299 No X2000 (A7805A), X2100 (A7825A, A8117A, A9364A, A9364B, A9378A) [869]Rem. None N/A SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Adaptec AIC 7892 PCI Yes driver aic7xxx[870]Rem. Cirrus Logic CS 4299 Yes driver cs4299 RedHat 7.1 X2000 (A7236A, A7236B), X2100 (A7822A) Matrox Millenium G450D AGP[871]Rem. Yes XFree 4.3.0^[872]Rem. (mga) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 None N/A Cirrus Logic CS 4299 Yes driver cs4299 RedHat 7.1 X2000 (A7237A), X2100 (A7823A, A7824A) nVidia Quadro2 Pro AGP Yes XFree 4.3.0^[873]Rem. (nv ou nVidia drivers[874]Rem. ) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Adaptec AIC 7892 PCI Yes driver aic7xxx[875]Rem. Cirrus Logic CS 4299 Yes driver cs4299 RedHat 7.1 X2000 (A7238A, A7862A), X2100 (A8029A) ATI fireGL2 AGP[876]Rem. Yes XFree 4.3.0^[877]Rem. (firegl[878]Rem.) SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Adaptec AIC 7892 PCI Yes driver aic7xxx[879]Rem. Cirrus Logic CS 4299 Yes driver cs4299 RedHat 7.1 X2100 (A9361A) ATI Radeon 7000 AGP No SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 None N/A Cirrus Logic CS 4299 Yes driver cs4299 No X2100 (A8074A, A9362A) ATI Radeon 7000 AGP No SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Adaptec AIC 7892 PCI Yes driver aic7xxx[880]Rem. Cirrus Logic CS 4299 Yes driver cs4299 No X2100 (A8076A, A9363A) ATI fireGL8800 AGP No SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Adaptec AIC 7892 PCI Yes driver aic7xxx[881]Rem. Cirrus Logic CS 4299 Yes driver cs4299 No X2100 (A8077A, A9379A) nVidia Quadro4 900 XGL AGP Yes XFree 4.3.0^[882]Rem. + nVidia drivers[883]Rem. SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 Adaptec AIC 7892 PCI Yes driver aic7xxx[884]Rem. Cirrus Logic CS 4299 Yes driver cs4299 No X4000 (A7265A, A8037A, A8111A, A8695A, A9380A) [885]Rem. None N/A Intel PRO 10/100 BT Yes driver eepro100 or [886]e100 Symbios Logic 53C810 PCI Yes driver ncr53c8xx[887]Rem. ??? ??? RedHat 7.1 X4000 (A7264A, A8034A, A8059A) [888]Rem. Matrox Millenium G450D AGP[889]Rem. Yes XFree 4.3.0^[890]Rem. (mga) Intel PRO 10/100 BT Yes driver eepro100 or [891]e100 Symbios Logic 53C810 PCI Yes driver ncr53c8xx[892]Rem. ??? ??? RedHat 7.1, Debian 3.0 X4000 (A7266A, A8035A, A8060A) [893]Rem. nVidia Quadro2 Pro AGP Yes XFree 4.3.0^[894]Rem. (nv ou nVidia drivers[895]Rem. ) Intel PRO 10/100 BT Yes driver eepro100 or [896]e100 Symbios Logic 53C810 PCI Yes driver ncr53c8xx[897]Rem. ??? ??? RedHat 7.1, Debian 3.0 X4000 (A7267A, A8036A, A8061A) [898]Rem. ATI fireGL2 AGP[899]Rem. Yes XFree 4.3.0^[900]Rem. (firegl[901]Rem.) Intel PRO 10/100 BT Yes driver eepro100 or [902]e100 Symbios Logic 53C810 PCI Yes driver ncr53c8xx[903]Rem. ??? ??? RedHat 7.1, Debian 3.0 X4000 (A8107A) [904]Rem. ATI Radeon 7000 AGP No Intel PRO 10/100 BT Yes driver eepro100 or [905]e100 Symbios Logic 53C810 PCI Yes driver ncr53c8xx[906]Rem. ??? ??? No X4000 (A8108A, A8109A) [907]Rem. ATI fireGL8800 AGP No Intel PRO 10/100 BT Yes driver eepro100 or [908]e100 Symbios Logic 53C810 PCI Yes driver ncr53c8xx[909]Rem. ??? ??? No X4000 (A8110A) [910]Rem. nVidia Quadro4 900 XGL AGP Yes XFree 4.3.0^[911]Rem. + nVidia drivers[912]Rem. Intel PRO 10/100 BT Yes driver eepro100 or [913]e100 Symbios Logic 53C810 PCI Yes driver ncr53c8xx[914]Rem. ??? ??? No XW4000 (AA672A, AA681A, AA684A) Intel i845G/E AGP[915]Rem. Yes XFree 4.3.0^[916]Rem. (i810) Intel PRO 10/100 BT Yes driver eepro100 or [917]e100 None N/A ??? ??? RedHat 8.0 XW4000 (AA665A, AA674A, AA676A, AA694A, AA739A) Intel i845G/E AGP[918]Rem. Yes XFree 4.3.0^[919]Rem. (i810) Intel PRO 10/100 BT Yes driver eepro100 or [920]e100 Adaptec AIC 29160 PCI Yes driver aic7xxx[921]Rem. ??? ??? RedHat 8.0 XW4000 (AA666A, AA668A, AA669A, AA692A, AA700A, AA701A) nVidia Quadro4 200 NVS AGP Yes XFree 4.3.0^[922]Rem. + nVidia drivers[923]Rem. Intel PRO 10/100 BT Yes driver eepro100 or [924]e100 None N/A ??? ??? RedHat 8.0 XW4000 (AA680A) nVidia Quadro2 EX AGP Yes XFree 4.3.0^[925]Rem. (nv ou nVidia drivers[926]Rem. ) Intel PRO 10/100 BT Yes driver eepro100 or [927]e100 None N/A ??? ??? RedHat 8.0 XW6000 (AA763A) None N/A Intel PRO 10/100 BT Yes driver eepro100 or [928]e100 None N/A ??? ??? RedHat 8.0 XW6000 (AA714A, AA715A, AA716A, AA717A, AA764A, AA765A, AA769A, AA770A, AA772A, AA773A, AA774A) None N/A Intel PRO 10/100 BT Yes driver eepro100 or [929]e100 Yes driver aic79xx[930]Rem. ??? ??? RedHat 8.0 XW6000 (AA771A, AA775A) nVidia Quadro4 200 NVS AGP Yes XFree 4.3.0^[931]Rem. + nVidia drivers[932]Rem. Intel PRO 10/100 BT Yes driver eepro100 or [933]e100 None N/A ??? ??? RedHat 8.0 XW6000 (AA777A) nVidia Quadro4 750 XGL AGP Yes XFree 4.3.0^[934]Rem. + nVidia drivers[935]Rem. Intel PRO 10/100 BT Yes driver eepro100 or [936]e100 None N/A ??? ??? RedHat 8.0 _________________________________________________________________ 3.2.1.4. Workstations accessories The following table provides all information on the support for this hardware by Linux. Table 3-9. Workstations accessories Reference Card type Chipset Linux support Tested A6076A (GL2), A7226A (GL4) Video Card ATI fireGL2 AGP[937]Rem. Yes XFree 4.3.0^[938]Rem. (firegl[939]Rem.) No A7192A Video Card Matrox Millenium G450D AGP[940]Rem. Yes XFree 4.3.0^[941]Rem. (mga) Yes A8051A, A8712A Video Card 3DLabs Wildcat III 6110 AGP Yes driver [942]wildcat/RedHat 7.3 No A6064A (MXR), A6065A (PRO), A7806A (EXE) Video Card nVidia Quadro2 Pro AGP Yes XFree 4.3.0^[943]Rem. (nv ou nVidia drivers[944]Rem. ) No A8064A (900XGL) Video Card nVidia Quadro4 Pro AGP No No CD-ROM, DVD and ZIP drives are supported by Linux kernel. Read the various HOWTO for their use, following the interface type. There are 4 supported graphics cards with XFree86 on HP X2000 and X4000 systems with Linux: SynergyPlus, Synergy2, Matrox G450, and FireGL2/4. There are also 4 rpms that are associated with these cards and they must be present on your system in order to have a supported graphics environment: synergyplus, synergy2, firegl2 and mgag450. For example, to check for the existence of the firegl2 rpm, run #rpm -q firegl2 Once you have installed the new card and rebooted, run /usr/X11R6/bin/graphicsconfig to configure the card. If it is a recognized card supported by your Linux system, the function will return the name of the card and it will be configured to run. At this point you may start up your X window environment. If it returns "UNKNOWN", then your graphics card either is not one of the 4 currently supported cards, or it is a newer/older version of the card than is supported. In either case you will need to run Xconfigurator to set it up. _________________________________________________________________ 3.2.1.5. The old mobile computer range (OmniBook) To suspend to disk the current session, you need to not have deleted the hibernation partition (type a0), which size should be the size of the RAM, to have support for APM in the kernel, and to use the key combination Fn+F12. In case of removal, it may be useful to recreate it to use [945]resize2fs, [946]partedand [947]lphdisk. To send the video signal, either to an external screen, or through the docking station, it is be necessary to add the following parameter to your XFree86 configuration file /etc/X11/XF86Config: [...] Section "Device" [...] Options "crt_screen" [...] This concerns mobile computers using ATI chipsets. The switch is done by pressing simultaneously on Fn-F5. Roman Stanchak provides a method to use alternatively many CRT or LCD screens at the following address [948]http://www.digitalmc.org/~roman/XF86Config-4. You have to use the following launch command: >startx -- -layout [Home|Work|...] Most of the OmniBook have in option a "Port Replicator" system allowing, according to the model, to support PCI cards, complementary ports, ... Web pages dedicated to Omnibook under Linux are available at: [949]http://www.swiss.ai.mit.edu/projects/omnibook/ and [950]http://www.linux-on-laptops.com/hp.html In case of problem with ACPI, some modified DSDT for Omnibook under Linux are available at [951]http://acpi.sourceforge.net/dsdt/view.php?manufacturer=HP A set of programs to use enhanced features of Omnibook named omke is available at [952]http://sourceforge.net/projects/omke Some Omnibook use Synaptic touchpads that can be controlled by the tpconfig program available at [953]http://compass.com/synaptics/. Typically, using tpconfig --sleep=1 at boot time disables the touchpad. The following table provides all information on the support for this hardware by Linux. Table 3-10. OmniBook and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested OmniBook Sojourn (F1430A) Neomagic MagicGraph 128XD NM2160 Yes XFree 4.3.0^[954]Rem. (neomagic) None N/A None N/A ??? ??? No OmniBook [955]XE (F1719W, F1720W, F1721W, F1722W) [956]Rem. Silicon Motion LynxE SM810^[957]Rem. Yes XFree 4.3.0^[958]Rem. (siliconmotion) None N/A None N/A ESS Maestro 2 Yes driver maestro[959]Rem. Yes OmniBook [960]XE2 (F1664W, F1666W|N F1667W|N, F1674W, F1675W, F1753W, F1756W, F1755W|N, F1772W, F1774W|N, F1775W|N, F1962W, F2051W, F2052W|K, F2053W|K, F2055W|K, F2065W|K, F2068W, F2069W|K) [961]Rem. Silicon Motion LynxE SM810^[962]Rem. Yes XFree 4.3.0^[963]Rem. (siliconmotion) None N/A None N/A ESS Maestro 3 Yes[964]Rem. Yes OmniBook [965]XE3 (F2113W|K, F2114W|K, F3877W) [966]Rem. [967]Rem. S3 Savage AGP[968]Rem. Yes XFree 4.3.0^[969]Rem. (savage) None N/A None N/A ESS Maestro 3 Yes[970]Rem. Yes OmniBook [971]XE3 (F2115W|K, F2116W|K, F2117W|K, F2302W|K, F2303W|K, F2305W|K, F2306W|K, F2308W|K, F2321W|K, F2331W|K, F2334W|K, F2335W|K, F2336W|K, F2396W|K, F2400W|K, F2402W|K, F3708W|K, F3863W|K, F3937H, F3939H, F4139W) [972]Rem. [973]Rem. S3 Savage AGP[974]Rem. Yes XFree 4.3.0^[975]Rem. (savage) Accton EN2242 minipci Yes driver tulip None N/A ESS Maestro 3 Yes[976]Rem. Yes OmniBook [977]XE3 /[978]i830 (F4711H) [979]Rem. Intel i830MP AGP[980]Rem. Yes XFree 4.3.0^[981]Rem. (i810) None N/A None N/A ESS Maestro 3 Yes[982]Rem. Debian 3.0 OmniBook [983]XE3 (F3470H|J|W, F3471H|J|W, F3472H|J|W, F3473H|J|W, F3935H|J|W, F3936H|J|W, F3937H|J|W, F3969H|J|W, F3970H|J|W, F3971H|J|W, F3972H|J|W, F3973H|J|W, F3974H|J|W, F3975H|J|W, F4957J) [984]Rem. Intel i830MP AGP[985]Rem. Yes XFree 4.3.0^[986]Rem. (i810) Intel PRO 10/100 BT Yes driver eepro100 or [987]e100 None N/A ESS Maestro 3 Yes[988]Rem. No OmniBook xe4100 (F4641J, F4642J, F4643J, F4644J, F4651J, F4652J) VIA Twister ??? ??? ??? None N/A ??? ??? No OmniBook [989]xe4500 (F4869J, F4870J, F4871J, F4873J, F4874J, F4875J, F4879J, F4882J, F4887J, F4888J, F4889J, F4890J) [990]Rem. ATI Radeon Mobility AGP Yes XFree 4.3.0^[991]Rem. (ati) ??? ??? None N/A ??? ??? RedHat 7.3, 8.0, 9.0, Debian [992]3.0 OmniBook xt6050 (F5652J, F5665J, F5800J) Intel i830MP AGP[993]Rem. Yes XFree 4.3.0^[994]Rem. (i810) ??? ??? None N/A ??? ??? No OmniBook xt6200 (F4535J, F5378J, F5379J, F5382J, F5383J, F5385J, F5386J, F5387JF5394J, F5395J, F5396J, F5864J, F5865J) [995]Rem. ATI Radeon Mobility AGP Yes XFree 4.3.0^[996]Rem. (ati) ??? ??? None N/A ??? ??? No OmniBook [997]500 (F2158W|K, F2159W|K, F2161W|K, F2162W|K) ATI Rage Mobility Yes XFree 4.3.0^[998]Rem. in Frame Buffer mode (FBDEV)[999]Rem. [1000]Rem. None N/A None N/A ESS Maestro 3 Yes[1001]Rem. RedHat 7.1, Debian 2.2, 3.0, SuSE 7.1, 7.3, [1002]8.0 OmniBook [1003]500 (F2164W|K, F2165W|K, F2167W|K, F2168W|K, F2974W|K, F2975W|K, F3477W|K, F3478W|K, F3483W|K, F3488W|K) ATI Rage Mobility Yes XFree 4.3.0^[1004]Rem. in Frame Buffer mode (FBDEV)[1005]Rem. [1006]Rem. 3Com 3C556 10/100 BT Yes driver [1007]Rem. None N/A ESS Maestro 3 Yes[1008]Rem. RedHat 7.1, Debian 2.2, 3.0 OmniBook [1009]510 (F4624W|J, F4625W|J, F4631W|J, F4789W|J, F4790W|J, F4791W|J, F5408J, F5410J) Intel i830MP AGP[1010]Rem. Yes XFree 4.3.0^[1011]Rem. (i810) ??? ??? None N/A ??? ??? Debian 3.0 OmniBook [1012]600 () [1013]Rem. Chips & Technologies CT65545 Yes XFree 4.3.0^[1014]Rem. (chips) None N/A None N/A ??? ??? RedHat 6.x, Debian 2.2 OmniBook [1015]800 (F1360A, F1175A, F1174A, F1173A, F1172A, F1171A) Neomagic MagicGraph 128XD NM2160 Yes XFree 4.3.0^[1016]Rem. (neomagic) None N/A SCSI Card Yes driver ncr53c8xx[1017]Rem. SoundBlaster compatible Yes driver sb Mandrake 8.0, Debian 2.2, SuSE 8.0, RedHat 7.2 OmniBook [1018]900 (F1711W|N, F1712W|N, F1760W|N) Neomagic MagicGraph 256AV NM2200 Yes XFree 4.3.0^[1019]Rem. (neomagic) None N/A None N/A Analog Device 1848 Yes driver AD1848 Mandrake 8.1 OmniBook [1020]900 (F1769W|N|K, F1770W|N|K, F1979W|N|K, F1980W|N|K, F2007W|N|K) ATI Rage Mobility Yes XFree 4.3.0^[1021]Rem. in Frame Buffer mode (FBDEV)[1022]Rem. [1023]Rem. None N/A None N/A ESS Maestro 2 Yes driver maestro[1024]Rem. Mandrake 8.1 OmniBook [1025]xt1000 S3 Savage AGP[1026]Rem. Yes XFree 4.3.0^[1027]Rem. (savage) None N/A SMC 1211 TX EZ Card 10/100 BT Yes driver rtl8139 ??? ??? No OmniBook 2000 (F1356A, F1397A) Chips & Technologies CT65554 Yes XFree 4.3.0^[1028]Rem. (chips) None N/A None N/A ??? ??? No OmniBook 2100 (F1584W, F1580W, F1581W, F1597W, F1598W, F1599W, F1600W, F1729W) Neomagic MagicGraph 128XD NM2160 Yes XFree 4.3.0^[1029]Rem. (neomagic) None N/A None N/A Crystal CS 4232 Yes Yes OmniBook [1030]3000 (F1391A, F1392A, F1393A) Neomagic MagicGraph 128XD NM2160 Yes XFree 4.3.0^[1031]Rem. (neomagic) None N/A None N/A Crystal CS 4232 Yes No OmniBook [1032]3100 (F1582W) Neomagic MagicGraph 128XD NM2160 Yes XFree 4.3.0^[1033]Rem. (neomagic) None N/A None N/A SoundBlaster compatible Yes driver sb No OmniBook [1034]4000 () WD90C24 PCI Yes XFree 3.3.6^[1035]Rem. (SVGA) None N/A None N/A ??? ??? No OmniBook [1036]4100 (F1462W, F1463W, F1479W, F1464W, F1703W) Neomagic MagicGraph 128XD NM2160 Yes XFree 4.3.0^[1037]Rem. (neomagic) None N/A None N/A ??? ??? Yes OmniBook [1038]4150 [1039]Rem. (F1629W|N, F1640W|N, F1641W|N, F1642W|N, F1647W|N, F1648W|N, F1663W|N) Neomagic MagicGraph 256AV NM2200 Yes XFree 4.3.0^[1040]Rem. (neomagic) None N/A None N/A Neomagic 256AV NM2200 Yes driver nm256_audio Mandrake, Debian OmniBook [1041]4150 (F1649W|N|K, F1650W|N|K, F1658W|N, F1660W|N, F1662W|N|K, F1976W|N|K, F1983W|N|K, F2000W|N|K) ATI Rage Mobility Yes XFree 4.3.0^[1042]Rem. in Frame Buffer mode (FBDEV)[1043]Rem. [1044]Rem. None N/A None N/A Neomagic 256AV NM2200 Yes driver nm256_audio Yes OmniBook [1045]5000 () Chips & Technologies CT65545 Yes XFree 4.3.0^[1046]Rem. (chips) None N/A None N/A Crystal CS 4232 Yes Yes OmniBook [1047]5500 () Chips & Technologies CT65548 Yes XFree 4.3.0^[1048]Rem. (chips) None N/A None N/A Crystal CS 4232 Yes Yes OmniBook [1049]5700 (F1352A, F1353A, F1396A, F1354A, F1355A) Chips & Technologies CT65554 Yes XFree 4.3.0^[1050]Rem. (chips) None N/A None N/A ??? ??? RedHat 7.0, 7.1, 7.2, Mandrake 7.1 OmniBook [1051]6000 [1052]Rem. (F2072W|K, F2079W|K, F2081W|K, F2083W|K, F2087W|K, F2090W|K, F2140W|K, F2144W|K, F2148W|K, F2150W|K, F2186W|K, F2182W|K, F2184W|K, F2188W|K, F2197W|K, F2200W|K, F2202W|K, F2205W|K) ATI Rage Mobility Yes XFree 4.3.0^[1053]Rem. in Frame Buffer mode (FBDEV)[1054]Rem. [1055]Rem. 3Com 3C556 10/100 BT Yes driver [1056]Rem. None N/A ESS Maestro 3 Yes[1057]Rem. RedHat 6.2, [1058]7.0, 7.1, Debian 2.2, Mandrake 7.1, [1059]8.0 OmniBook xt6050 (F4506J|K, F4508J|K, F4510J|K, F4514J|K, F4515J|K, F4517J|K, F4518J|K) Intel i830MP AGP[1060]Rem. Yes XFree 4.3.0^[1061]Rem. (i810) ??? ??? None N/A ??? ??? No OmniBook 6100 [1062]Rem. (F3251W|K, F3253W|K, F3257W|K, F3259W|K, F3260W|K, F3262W|K, F3263W|K, F3265W|K, F3266W|K, F3268W|K) ATI Radeon Mobility AGP Yes XFree 4.3.0^[1063]Rem. (ati) Intel PRO 10/100 BT Yes driver eepro100 or [1064]e100 None N/A ESS Maestro 3 Yes[1065]Rem. RedHat 7.2, Mandrake 8.1, 8.2 OmniBook vt6200 (F5050J, F5051J, F5055J, F5056J, F5057J, F5060J, F5061J) ??? ??? ??? ??? None N/A ??? ??? No OmniBook [1066]7100 (F1441W, F1442W) ATI Rage LT Pro Yes XFree 4.3.0^[1067]Rem. (ati) None N/A None N/A SoundBlaster compatible Yes driver sb RedHat 7.0 OmniBook 7150 (F1443W) ATI Rage LT Pro Yes XFree 4.3.0^[1068]Rem. (ati) None N/A None N/A ESS Maestro 2 Yes driver maestro[1069]Rem. No _________________________________________________________________ 3.2.1.6. Mobile computer accessories The cards mentionned below are PCMCIA or PC-Card cards. The following table provides all information on the support for this hardware by Linux. Table 3-11. Mobile computer accessories Reference Card type Chipset Linux support Tested F1623A Modem/Net Card Xircom CEM56-100 56Kb 10/100 BT Yes driver xirc2ps_cs Yes F1625A Modem Card ??? ??? No F1626A Network Card 3Com 3CXFE575BT 10/100 BT ??? No F1626B Network Card ??? ??? No F2136B Network Card Lucent 802.11b wireless driver orinoco[1070]Rem. Mandrake 8.1 F1643A Modem/Net Card ??? ??? No F1782A Modem/Net Card ??? ??? No _________________________________________________________________ 3.2.1.7. The mobile computer range (Evo) Some comments which apply also to EVO notebooks should be read at the begining of [1071]Section 3.2.1.5. A page is also dedicated to users experience with Linux/EVO at [1072]http://www.linux-on-laptops.com/compaq.html In case of problem with ACPI, some modified DSDT for EVO under Linux are available at [1073]http://acpi.sourceforge.net/dsdt/view.php?manufacturer=Compaq The following table provides all information on the support for this hardware by Linux. Table 3-12. Evo and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested Evo [1074]N410c () ATI Radeon Mobility AGP Yes XFree 4.3.0^[1075]Rem. (ati) Intel PRO 10/100 BT Yes driver eepro100 or [1076]e100 None N/A Intel 82810 Audio Yes driver Alsa^[1077]Rem. Debian Evo [1078]N600c () ATI Radeon Mobility AGP Yes XFree 4.3.0^[1079]Rem. (ati) Intel PRO 10/100 BT Yes driver eepro100 or [1080]e100 None N/A Intel 82810 Audio Yes driver Alsa^[1081]Rem. Debian, SuSE 8.1, [1082]Gentoo Evo [1083]N610c () ATI Radeon Mobility AGP Yes XFree 4.3.0^[1084]Rem. (ati) Intel PRO 10/100 BT Yes driver eepro100 or [1085]e100 None N/A Intel 82810 Audio Yes driver Alsa^[1086]Rem. SuSE 8.0, 8.1 Evo [1087]N800c () ATI Radeon Mobility AGP Yes XFree 4.3.0^[1088]Rem. (ati) Intel PRO 10/100 BT Yes driver eepro100 or [1089]e100 None N/A Intel 82810 Audio Yes driver Alsa^[1090]Rem. SuSE 8.0, 8.1, RedHat [1091]8.0, Debian [1092]3.0 _________________________________________________________________ 3.2.1.8. The old handheld range (Jornada) The following table provides all information on the support for this hardware by Linux. Table 3-13. Jornada and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested Jornada 710 (F1889A) ??? ??? None N/A None N/A None N/A No Jornada [1093]720 (F1816A, F1430A) ??? ??? None N/A None N/A None N/A Yes For this machine look at : [1094]http://www.arm.linux.org.uk/developer/machines/?action=list&id=4 8 Models 620, 680 and 690, equiped with a superH processor are also supported by the Linux Kernel. Cf: [1095]http://www.handhelds.org/projects/jornada.html The other models of Jornada can not run Linux. Consult also this [1096]article on the port of NetBSD on a Jornada 728. _________________________________________________________________ 3.2.1.9. The handheld range (iPAQ) The following table provides all information on the support for this hardware by Linux. Table 3-14. iPAQ and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested iPAQ [1097]1900 () ??? ??? None N/A None N/A None N/A Yes iPAQ [1098]3100 () ??? ??? None N/A None N/A None N/A Yes iPAQ [1099]3600 () ??? ??? None N/A None N/A None N/A Yes iPAQ [1100]3800 (H3835, H3850, H3870) ??? ??? None N/A None N/A None N/A Yes iPAQ [1101]3900 () ??? ??? None N/A None N/A None N/A Yes iPAQ [1102]5400 () ??? ??? None N/A None N/A None N/A Yes For these machines look at : [1103]http://www.arm.linux.org.uk/developer/machines, [1104]http://www.handhelds.org and [1105]http://mstempin.free.fr/linux-ipaq/ A mailing-list dedicated to these machines is available at [1106]http://www.handhelds.org/mailman/listinfo/ipaq _________________________________________________________________ 3.2.1.10. The tablet PC range The following table provides all information on the support for this hardware by Linux. Table 3-15. Tablet PC and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested [1107]TC1000() nVidia GeForce 2 GTS AGP Yes XFree 4.3.0^[1108]Rem. (nv ou nVidia drivers[1109]Rem. ) Intel PRO 10/100 BT Yes driver eepro100 or [1110]e100 None N/A VIA 82C686 Yes driver Alsa^[1111]Rem. Debian _________________________________________________________________ 3.2.1.11. The old server range (NetServer) A page on how Linux works on HP NetServers is available at [1112]http://www.netserver.hp.com/netserver/products/highlights_linux.asp An official compatibility matrix of HP NetServers with Linux and other operating systems is available at : [1113]http://netserver.hp.com/products/highlights_nos.asp Documents (in japanese) written by Junichi Shimoda concerning management of AMI Megaraid cards and HP Instant TopTools under Linux are respectively available at [1114]http://www.jpn.hp.com/biz/products/pcserver/linux/document/pdf/rh70_lp 1000r_megamgr.pdf and [1115]http://www.jpn.hp.com/biz/products/pcserver/linux/document/pdf/instant tt-rh62.pdf Official documents to help configuring NetServers under Linux [1116]RedHat [1117]5.2 and [1118]6.0 are also available. The following table provides all information on the support for this hardware by Linux. Table 3-16. NetServers and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested NetServer E45 (D4973A, D4974A, D4975A, D4976A, D5971A) Cirrus Logic GD 5446 PCI Yes XFree 4.3.0^[1119]Rem. (cirrus) Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [1120]e100 Adaptec AIC 2910bui (7860) PCI Yes driver aic7xxx[1121]Rem. None N/A No NetServer E50 (D6034A, D6033A, D6035A, D6031A, D6030A, D6032A) Cirrus Logic GD 5446 PCI Yes XFree 4.3.0^[1122]Rem. (cirrus) Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [1123]e100 Adaptec AIC 7880 UW PCI Yes driver aic7xxx[1124]Rem. None N/A Yes NetServer E55 (D9337A) ATI Rage II C AGP Yes XFree 4.3.0^[1125]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1126]e100 Adaptec AIC 7895H PCI Yes driver aic7xxx[1127]Rem. None N/A No NetServer E60 (D7140A, D7142A, D7144A, D7146A, D7148A, D9123A, D9127A, D9128A, D9129A) ATI Rage II C AGP Yes XFree 4.3.0^[1128]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1129]e100 Adaptec AIC 7895H PCI Yes driver aic7xxx[1130]Rem. None N/A Yes NetServer E200 (P4595A, P5404A, P5447A) ATI Rage II C AGP Yes XFree 4.3.0^[1131]Rem. (ati) Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [1132]e100 None N/A None N/A No NetServer E200 (P1205A, P2448A, P4594A, P5403A) ATI Rage II C AGP Yes XFree 4.3.0^[1133]Rem. (ati) Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [1134]e100 Adaptec AIC 7880 UW PCI Yes driver aic7xxx[1135]Rem. None N/A No NetServer E800 (D9400A, D9402A, D9404A, D9408A, D9409, D9411A, P1195A, P1200A, P2457A, P2458A, P2460A, P2477A, P2502A, P2503A, P2504A, P3428A, P3432A, P5368A, P5370A, P5372A, P5374A, P5551A, P5553A, P7655A, P7666A, P7687A) [1136]Rem. ATI Rage II C AGP Yes XFree 4.3.0^[1137]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1138]e100 2 Symbios Logic 53C896 PCI Yes driver sym53c8xx[1139]Rem. None N/A RedHat 7.0, Mandrake 7.2 NetServer LC (D3343A) Trident TVGA 9000i Yes XFree 3.3.6^[1140]Rem. (SVGA) None N/A Adaptec AIC 7770 EISA Yes driver aic7xxx[1141]Rem. None N/A Yes NetServer LCII (D4907A, D4909A, D5014A, D5015A, D5016A, D5969A, D5970A, D5959A, D5961A) Cirrus Logic GD 5446 PCI Yes XFree 4.3.0^[1142]Rem. (cirrus) Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [1143]e100 Adaptec AIC 7880 UW PCI Yes driver aic7xxx[1144]Rem. None N/A Yes NetServer LC3 (D6123A, D7018A, D6125A, D7020A, D7028A, D7025A, D7126A, D8594A) Chipset BX[1145]Rem. Cirrus Logic GD 5446 PCI Yes XFree 4.3.0^[1146]Rem. (cirrus) Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [1147]e100 Adaptec AIC 7880 UW PCI Yes driver aic7xxx[1148]Rem. None N/A Yes NetServer LC2000 (D8514A, D8515A, D8519A, D8520A, D8524A, D8525A, D9162A, D9163A, D9164A, D9165A, P1802A, P1802B, P1804A, P1804B, P2478A, P2478B, P2479A, P2479B, P3493A, P3493B, P5364B, P5550B, P7668B, P7669B) Chipset i820^[1149]Rem. [1150]Rem. [1151]Rem. ATI Rage II C AGP Yes XFree 4.3.0^[1152]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1153]e100 2 Symbios Logic 53C897 PCI Yes driver ncr53c8xx[1154]Rem. None N/A RedHat 6.2, 7.0, 7.3, Mandrake 7.2, 8.1 NetServer LDPro (D4944A, D4946A, D4961A, D4962A) Trident TVGA 9000i Yes XFree 3.3.6^[1155]Rem. (SVGA) Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [1156]e100 Adaptec AIC 7880 UW PCI Yes driver aic7xxx[1157]Rem. None N/A No NetServer LHPro (D4979A, D4980A, D4981A, D4982A) Trident TVGA 9000i Yes XFree 3.3.6^[1158]Rem. (SVGA) None N/A 2 Adaptec AIC 7880 UW PCI Yes driver aic7xxx[1159]Rem. None N/A Yes NetServer LHII (D5017A, D5953A, D5021A, D5023A, D6047A, D6048A) Trident TVGA 9000i Yes XFree 3.3.6^[1160]Rem. (SVGA) None N/A 2 Adaptec AIC 7880 UW PCI Yes driver aic7xxx[1161]Rem. None N/A Yes NetServer LH3 (D4998A, D5002A, D5000A, D5004A, D7033A, D7034A, D8503A, D8504A, D8567A, D8568A, D9343A, D9344A) Chipset BX[1162]Rem. [1163]Rem. Cirrus Logic GD 5446 PCI Yes XFree 4.3.0^[1164]Rem. (cirrus) Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [1165]e100 2 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[1166]Rem. None N/A Yes NetServer LH3000 (D8228A, D8230A, D8236A, D8238A, D8244A, D8246A, D9176A, D9178A, D9180A, D9182A, P1794A, P1794B, P1796A, P1796B, P2482A, P2482B, P2483A, P2483B, P7670B) Chipset BX[1167]Rem. [1168]Rem. [1169]Rem. ATI Rage II C AGP Yes XFree 4.3.0^[1170]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1171]e100 Adaptec AIC 7880 PCI + 2 Symbios Logic 53C896 PCI Yes driver aic7xxx and driver sym53c8xx None N/A RedHat 6.2, 7.0, Mandrake 7.2, 8.1 NetServer LH4 (D7092A, D7093A, D7094A, D7095A, D6971A, D6972A, D6973A, D6974A, D7103A, D7104A, D8552A, D8553A, D8556A, D8557A, D8560A, D8561A, P1225A, P1227A) Chipset BX[1172]Rem. [1173]Rem.[1174]Rem. [1175]Rem. Cirrus Logic GD 5446 PCI Yes XFree 4.3.0^[1176]Rem. (cirrus) Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [1177]e100 2 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[1178]Rem. None N/A RedHat 6.0, 6.1, 6.2, 7.0, NOT 7.1, 7.2 NetServer LH6000 (D9103A, D9104A, D9107A, D9108A, D9190A, D9190B, D9192A, D9192B, D9194A, D9194B, D9196A, D9196B, P1816B, P1817B, P2622A, P2623A) Chipset BX[1179]Rem. [1180]Rem. [1181]Rem. [1182]Rem. [1183]Rem. ATI Rage II C AGP Yes XFree 4.3.0^[1184]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1185]e100 Adaptec AIC 7880 PCI + 2 Symbios Logic 53C896 PCI Yes driver aic7xxx and driver sym53c8xx None N/A RedHat 6.2, 7.0, Mandrake 7.2, 8.1 NetServer LPr (D6130A, D6131A, D7171A, D9133A, D9348A, D9431A, D9434A, P1736A, P1738A, P1820A, P3417A) Chipset BX[1186]Rem. Cirrus Logic GD 5446 PCI Yes XFree 4.3.0^[1187]Rem. (cirrus) Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [1188]e100 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[1189]Rem. None N/A RedHat 6.2, 7.0, Debian 2.2 NetServer LP1000r (P1810A, P1812A, P2465A, P4632A, P4634A, P5476A, P7674A) [1190]Rem. [1191]Rem. ATI Rage II C AGP Yes XFree 4.3.0^[1192]Rem. (ati) 2 x Intel i82559 10/100 BT Yes driver eepro100 or [1193]e100 2 Symbios Logic 53C1010 PCI Yes driver sym53c8xx[1194]Rem. None N/A RedHat 6.1, 6.2, 7.0, 7.1, 7.2, Mandrake 7.2, 8.1, SuSE 7.0, Debian 2.2, 3.0 NetServer LP1000r (P3573A) [1195]Rem. [1196]Rem. [1197]Rem. ATI Rage II C AGP Yes XFree 4.3.0^[1198]Rem. (ati) 2 x Intel i82559 10/100 BT Yes driver eepro100 or [1199]e100 2 Symbios Logic 53C1010 PCI Yes driver sym53c8xx[1200]Rem. None N/A Preload RedHat 7.0 based NetServer LP1000r (P3574A) [1201]Rem. [1202]Rem. [1203]Rem. ATI Rage II C AGP Yes XFree 4.3.0^[1204]Rem. (ati) 2 x Intel i82559 10/100 BT Yes driver eepro100 or [1205]e100 2 Symbios Logic 53C1010 PCI Yes driver sym53c8xx[1206]Rem. None N/A Preload SuSE 7.0 based NetServer LP2000r (P1824A, P1827A, P1830A, P3576A, P4636A, P4638A, P5478A, P7676A) [1207]Rem. [1208]Rem. ATI Rage II C AGP Yes XFree 4.3.0^[1209]Rem. (ati) 2 x Intel i82559 10/100 BT Yes driver eepro100 or [1210]e100 2 Symbios Logic 53C1010 PCI Yes driver sym53c8xx[1211]Rem. None N/A RedHat 6.1, 6.2, 7.0, 7.1, 7.2, Mandrake 7.2, 8.1, SuSE 7.0, Debian 2.2, 3.0 Cluster NetServer LPr (D6131A, P1133A)[1212]Rem. Cirrus Logic GD 5446 PCI Yes XFree 4.3.0^[1213]Rem. (cirrus) Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [1214]e100 Symbios Logic 53C895 PCI Yes driver ncr53c8xx[1215]Rem. None N/A Yes NetServer LT6000r (D9143A, D9145A, P1756A, P1756B, P1758A, P1758B, P1821B, P2621A, P3460) Chipset BX[1216]Rem. [1217]Rem. [1218]Rem. [1219]Rem. [1220]Rem. ATI Rage II C AGP Yes XFree 4.3.0^[1221]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1222]e100 Adaptec AIC 7880 PCI + 2 Symbios Logic 53C896 PCI Yes driver aic7xxx and driver sym53c8xx None N/A RedHat 6.2, 7.0, Mandrake 7.2, 8.1 NetServer LXePro/LXPro (D4920B, D4925B, D6036A, D4311B, D4312B, D6037A, D4315B, D4958B, D6014A, D6015A, D4964B, D4898A, D6016A, D4899A, D6017A, D4900A, D6018A) Cirrus Logic GD 5424 PCI Yes XFree 3.3.6^[1223]Rem. (SVGA) None N/A 2 Adaptec AIC 7880 UW PCI Yes driver aic7xxx[1224]Rem. None N/A RedHat 7.0 NetServer LXrPro8 (D5028A) ? ? None N/A Symbios logic UW ? None N/A No NetServer LXr8000 (D6021A, D6022A, D6136A, D6137A, D7000A, D8256A, D8257A, D8258A, D8546A, D8548A) [1225]Rem. Cirrus Logic GD 5446 PCI Yes XFree 4.3.0^[1226]Rem. (cirrus) None N/A 2 Symbios Logic 53C896 PCI Yes driver sym53c8xx[1227]Rem. None N/A Yes NetServer LXr8500 (D8540A, D8542A, D9317A, D9417A, D9418A, P1230A, P1765A, P3461A) [1228]Rem. Cirrus Logic GD 5446 PCI Yes XFree 4.3.0^[1229]Rem. (cirrus) None N/A 2 Symbios Logic 53C896 PCI Yes driver sym53c8xx[1230]Rem. None N/A RedHat 7.1 NetServer TC2100 (P4649A, P4654A, P7691A, P7717A) ATI Rage II C AGP Yes XFree 4.3.0^[1231]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1232]e100 None N/A None N/A Mandrake 8.1, RedHat 7.1, 7.2 NetServer TC2100 (P4648A, P4652A) ATI Rage II C AGP Yes XFree 4.3.0^[1233]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1234]e100 Adaptec AIC 29160 PCI Yes driver aic7xxx[1235]Rem. None N/A Mandrake 8.1, RedHat 7.1, 7.2 NetServer TC2110 (P5499A, P5530A, P7759A) ATI Rage II C AGP Yes XFree 4.3.0^[1236]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1237]e100 None N/A None N/A Mandrake 8.1, RedHat 7.1, 7.2 NetServer TC2110 (P5498A, P5529A, P7740A, P7758A) ATI Rage II C AGP Yes XFree 4.3.0^[1238]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1239]e100 Adaptec AIC 29160 PCI Yes driver aic7xxx[1240]Rem. None N/A Mandrake 8.1, RedHat 7.1, 7.2 NetServer TC3100 (P3505A, P3506A, P3507A, P5375A, P5376A, P5377A, P5408A, P5409A, P5411A, P5412A, P7658A, P7659A, P7734A, P7735A) [1241]Rem. ATI Rage II C AGP Yes XFree 4.3.0^[1242]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1243]e100 2 Symbios Logic 53C1010 PCI Yes driver sym53c8xx[1244]Rem. None N/A Mandrake 8.1, RedHat 7.1, 7.2, SuSE 7.2 NetServer TC4100 (P3537A, P3539A, P3545A, P3547A, P3549A, P3551A) [1245]Rem. ATI Rage II C AGP Yes XFree 4.3.0^[1246]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1247]e100 2 Symbios Logic 53C1010 PCI Yes driver sym53c8xx[1248]Rem. None N/A Mandrake 8.1, RedHat 7.1, 7.2, SuSE 7.2 NetServer TC4100 (P5417A, P7706A, P7707A, P7708A, P7741A, P7742A, P7743A, P7744A) [1249]Rem. ATI Rage II C AGP Yes XFree 4.3.0^[1250]Rem. (ati) Intel S82093A / i82559 10/100 BT Yes driver eepro100 or [1251]e100 AMI Megaraid (Raid 0, 1, 3, 5, 10, 50) Yes driver megaraid^[1252]Rem. None N/A Mandrake 8.1, RedHat 7.1, 7.2, SuSE 7.2 _________________________________________________________________ 3.2.1.12. NetServers accessories The following table provides all information on the support for this hardware by Linux. Table 3-17. NetServers accessories Reference Card type Chipset Linux support Tested NetRaid 1 D4992A NetRaid Card AMI Megaraid (Raid 0, 1, 3, 5, 10, 50) Yes driver megaraid^[1253]Rem. RedHat 6.0, 6.1, 6.2, 7.0, 7.1, 7.2, Mandrake 7.2, 8.0, 8.1, SuSE 7.0 NetRaid 1Si D2140A NetRaid Card AMI Megaraid (Raid 0, 1, 3, 5, 10, 50) Yes driver megaraid^[1254]Rem. RedHat 6.0, 6.1, 6.2, 7.0, 7.1, Mandrake 7.2, 8.0, SuSE 7.0 NetRaid 1M P3410A [1255]Rem. NetRaid Card AMI Megaraid (Raid 0, 1, 3, 5, 10, 50) Yes driver megaraid^[1256]Rem. RedHat 6.1, 6.2, 7.0, 7.1, 7.2, Mandrake 8.1 NetRaid 2M P3411A, P3411B, P3475A, P3475B [1257]Rem. NetRaid Card AMI Megaraid (Raid 0, 1, 3, 5, 10, 50) Yes driver megaraid^[1258]Rem. RedHat 6.1, 6.2, 7.0, 7.1, 7.2, Mandrake 8.1 NetRaid 3 D4943A NetRaid Card AMI Megaraid (Raid 0, 1, 3, 5, 10, 50) Yes driver megaraid^[1259]Rem. RedHat 6.0, 6.1, 6.2, 7.0, 7.1, 7.2, Mandrake 7.2, 8.0, 8.1, SuSE 7.0 NetRaid 3Si D5955A NetRaid Card AMI Megaraid (Raid 0, 1, 3, 5, 10, 50) Yes driver megaraid^[1260]Rem. RedHat 6.0, 6.1, 6.2, 7.0, 7.1, 7.2, Mandrake 7.2, 8.0, 8.1, SuSE 7.0 NetRaid 4M D9161A, D9351A NetRaid Card Strong ARM (Raid 0, 1, 3, 5, 10, 50) Yes driver aacraid^[1261]Rem. RedHat 7.0, 7.1, Mandrake 8.0, 8.1 C1578B SCSI Card Adaptec AIC 7895H PCI Yes driver aic7xxx[1262]Rem. No C7430A SCSI Card Adaptec AIC 7880 UW PCI Yes driver aic7xxx[1263]Rem. No D5025A SCSI Card Adaptec AIC 7880 UW PCI Yes driver aic7xxx[1264]Rem. Yes D5252A SCSI Card Adaptec AIC 7880 UWD PCI Yes driver aic7xxx[1265]Rem. Yes P3413A SCSI Card Adaptec AIC 29160 PCI Yes driver aic7xxx[1266]Rem. RedHat 6.2, 7.0, 7.1, 7.2, Mandrake 8.1 D5013A, D5013B Network Card Intel i82557 / i82558 10/100 BT (D5013A/B) Yes driver eepro100 or [1267]e100 RedHat 6.2, 7.0, 7.1, Mandrake 7.2, 8.0, 8.1 P3482A Network Card 3Com ??? 10/100/1000 BT Yes driver bcm5700^[1268]Rem. RedHat 7.0, 7.1, 7.2, Mandrake 8.0, 8.1 P3492A Network Card ??? ??? No P5545A Network Card ??? ??? No J2585B Network Card card 100VG (J2585B) Yes driver hp100 Yes D6977A Fibre Channel Card ??? ??? No D5246A Fibre Channel Card ??? ??? No D8602A Fibre Channel Card ??? ??? No D8602B Fibre Channel Card ??? ??? No A7298A Fibre Channel Card Emulex Fibre Channel LP 982 driver [1269]emulex Yes D6028A, P1218A, P5445A Top Tools Management Card ??? Yes Yes P1979A USB Modem ??? ??? No D8384B USB Modem [1270]Aztech UM9800 [1271]driver Aztech Yes For TopTools Remote Control Cards (TTRCC), the B.02.02 firmware release shows some strange symptoms at boot time, namely you get no data in your browser (Netscape on Linux) until way past selftest and LILO, so it's kind of hard to boot an alternate kernel. The fix is to 'downgrade' your firmware on the TTRCC to B.02.00. You can see what revision you're running on the TopTools 'Identity Screen'. You can flash the eeprom on the TTRCC anytime (unless you really want to make a DOS floppy and reboot) by tftping the right firmware (ttrc0200.bin) in the 'Configuration' tab -> 'Card Info' area, and press 'Update'. It takes a minute or so to download/verify/and reset the TTRCC. (Information from Lee Mayes) _________________________________________________________________ 3.2.1.13. The server range (Proliant) Pages on how Linux works on HP Proliant are available at [1272]http://www.compaq.com/products/servers/linux/whitepapers.html and [1273]http://h18000.www1.hp.com/products/servers/linux/15ad-0701a-wwen.html A page on certification of SuSE and Redhat Linux distributions on HP Proliant is available at [1274]http://www.compaq.com/products/servers/linux/hpLinuxcert.html A page iving access to all the software provided for HP Proliant and sorted by distribution is available at [1275]http://www.compaq.com/products/servers/linux/softwaredrivers.html Richard Black's site is also an information mine on Linux history with Proliant, that you'll consult with great benefit at [1276]http://www.cpqlinux.com. The table here after gives information on machines available after the HP/Compaq merge (May 2002). The following table provides all information on the support for this hardware by Linux. Table 3-18. Proliant and Linux Machine Graphic Card Linux support Network Card Linux support SCSI Card Linux support Sound Card Linux support Tested Proliant ML310 (263629, 264658, 306669, ) ATI Rage XL AGP 8MB Yes XFree 4.3.0^[1277]Rem. (ati) card HP Gigabit (BCM5700 like) Yes driver bcm5700 or HP[1278]Rem. Mega IDE raid controler (0, 1, 1+0) Yes driver megaide^[1279]Rem. None N/A No Proliant ML310 (263659, 263660, 306667) ATI Rage XL AGP 8MB Yes XFree 4.3.0^[1280]Rem. (ati) card HP Gigabit (BCM5700 like) Yes driver bcm5700 or HP[1281]Rem. Adaptec AIC 29160 PCI Yes driver aic7xxx[1282]Rem. None N/A No Proliant ML330 G2 () ??? ??? Compaq Fast Ethernet Adapter (Intel Pro/100 based) Yes driver eepro100 or [1283]e100 or HP[1284]Rem. ??? ??? None N/A No Proliant ML330 G2 () ??? ??? Compaq Fast Ethernet Adapter (Intel Pro/100 based) Yes driver eepro100 or [1285]e100 or HP[1286]Rem. Mega IDE raid controler (0, 1, 1+0) Yes driver megaide^[1287]Rem. None N/A No Proliant ML570 G2 () ??? ??? Compaq Fast Ethernet Adapter (Intel Pro/100 based) Yes driver eepro100 or [1288]e100 or HP[1289]Rem. Yes driver aic7xxx[1290]Rem. None N/A No Proliant DL360 G2 () ??? ??? Compaq Fast Ethernet Adapter (Intel Pro/100 based) Yes driver eepro100 or [1291]e100 or HP[1292]Rem. Compaq Smart Array 5i Yes driver cciss[1293]Rem. None N/A No Proliant DL380 G2 () ??? ??? Compaq Fast Ethernet Adapter (Intel Pro/100 based) Yes driver eepro100 or [1294]e100 or HP[1295]Rem. Compaq Smart Array 5i Yes driver cciss[1296]Rem. None N/A No Proliant DL360 G3 () [1297]Rem. ??? ??? Compaq Gigabit Ethernet Adapter (Intel Pro/1000 based) Yes driver [1298]e1000 or HP[1299]Rem. Compaq Smart Array 5i Yes driver cciss[1300]Rem. None N/A No Proliant DL380 G3 () [1301]Rem. ??? ??? Compaq Gigabit Ethernet Adapter (Intel Pro/1000 based) Yes driver [1302]e1000 or HP[1303]Rem. Compaq Smart Array 5i Yes driver cciss[1304]Rem. None N/A No Proliant DL580 G2 () [1305]Rem. ??? ??? ??? ??? Compaq Smart Array 5i Yes driver cciss[1306]Rem. None N/A No Proliant DL760 G2 () [1307]Rem. ??? ??? card HP Gigabit (Tigon3 like) Yes driver tg3 or HP[1308]Rem. Compaq Smart Array 5i Yes driver cciss[1309]Rem. None N/A SuSE UL 1.0 _________________________________________________________________ 3.2.1.14. Proliant accessories The following table provides all information on the support for this hardware by Linux. Table 3-19. Proliant accessories Reference Card type Chipset Linux support Tested NC3120, NC3121, NC3122, NC3123, NC3131, NC3132, NC3133, NC3134, NC3135, NC3163 Network Card Compaq Fast Ethernet Adapter (Intel Pro/100 based) Yes driver eepro100 or [1310]e100 or HP[1311]Rem. RedHat 6.2-8.0 Mandrake 8.0-9.0 SuSE 6.4-8.0 NC6132, NC6133, NC6134, NC6136, NC7131, NC7132 Network Card Compaq Gigabit Ethernet Adapter (Intel Pro/1000 based) Yes driver [1312]e1000 or HP[1313]Rem. RedHat 7.2-8.0 Mandrake 8.0-9.0 SuSE 7.0-8.0 NC6770, NC7760, NC7770, NC7771, NC7780, NC7781 Network Card card HP Gigabit (BCM5700 like) Yes driver bcm5700 or HP[1314]Rem. RedHat 7.1-7.3, 8.0 Mandrake 8.0-8.2, 9.0 SuSE 8.0 Smart Array 5i, 5i+, 532, 5300, 5302, 5304, 5312 Raid Card Compaq Smart Array 5i Yes driver cciss[1315]Rem. RedHat 7.0-8.0 Mandrake 9.0, 9.1 _________________________________________________________________ 3.2.1.15. HP Server Appliances Information concerning these machines are available at [1316]http://www.hp.com/products1/servers/serverappliances/ The "Web hosting" SA1100 (P4533A) and SA1120 (P4534A) machines are equiped with a RedHat based distribution of Linux. The "Web caching" SA2100 (P4535A), SA2150 (P4651A), SA2200 (P4536A) and SA2250 (P4537A) machines are equiped with a RedHat based distribution of Linux and of the Inktomi software. The hardware base is a LP1000r. _________________________________________________________________ 3.2.1.16. Complementary information Please refer to the [1317]Hardware Howto and [1318]Ethernet Howto for other details concerning the support of some hardware elements by Linux. For video chipsets support, a fundamental page is the one of [1319]XFree86 with its supported [1320]chipsets list. Commercial servers are also available, as those of [1321]X-Inside and [1322]MetroLink Netvectra are not supported by Linux. Driver supporting the HP GPIB cards (IEEE 488) HP 27209 (= HP 82990, HP 61062, HP 88500) and HP 82335 is available at the following address : [1323]ftp://ftp.llp.fu-berlin.de/pub/linux/LINUX-LAB/IEEE488. Another GPIB driver may be found at this address [1324]http://www.inesinc.com/linux.htm. XFree86 The latest version of XFree86 is the 4.1.0, available from [1325]this server. G100 card To use the MGA G100 AGP card, with a version of XFree86 before the 3.3.2 one, you have to use an option in the file XF86Config : Option "no_accel". Section example : Section "Device" [...] VendorName "Matrox" VideoRam 4096 Option "no_accel" EndSection G450 card This card can support up to two displays. These displays can be configured in two different ways. For uniquely independent screen operation, you can configure displays for "multi-screen" work. In this mode, the X server reports two independent screens for client connections. These are numbered using the "minor" display number (e.g. :0.0 and :0.1). There is no support to move client windows between the screens. The other configuration option uses the XINERAMA extension. This configuration links multiple screens to behave as one logical screen. In this mode, the X server reports one screen for all client connections. X clients can move between screens and the overall screen resolution is doubled width or height depending upon the desired setup. The following examples demonstrate these possibilities through the configuration file /etc/X11/XF86Config-4 : Section "Device" Identifier "G450_0" Driver "mga" Screen 0 EndSection Section "Device" Identifier "G450_1" Driver "mga" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "G450_0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" Viewport 0 0 EndSubsection EndSection Section "Screen" Identifier "Screen1" Device "G450_1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" Viewport 0 0 EndSubsection EndSection Section "ServerLayout" Identifier "MyLayout" Screen "Screen0" LeftOf "Screen1" Screen "Screen1" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection To enable the XINERAMA extension, you may use one of two ways. The first is by adding a command-line option to the X server. This can be done as follows: #startx -- +xinerama The second method is by adding an option to /etc/X11/XF86Config-4 : Section "ServerFlags" Option "Xinerama" "on" EndSection The Matrox driver supports several XFree86 options through the file /etc/X11/XF86Config-4. The example below describes two such options that contribute to improved graphics performance: Section "Device" Identifier "Matrox G450" Driver "mga" # Use this option to enable AGP 2X mode # In default mode AGP 1x, the host to graphics bandwidth is about 500 MB/sec # This will increase the host to graphics bandwidth to about 1 GB/sec # This mode is recommended by HP for X2000/X4000 Option "AGPMode4x" "on" # Use this option to enable AGP 4X mode # This will increase the host to graphics bandwidth to about 2 GB/sec # This mode is recommended by HP for X2000/X4000 EndSection Brett Johnson also mentions that the newest matrox driver will "merge" the two heads into a single screen at the driver level. This has the advantage that it's a *lot* more stable, and a little faster than xinerama. Here is an example of the relevant sections from XF86Config: Section "Device" Identifier "MATROX CARD 1" Driver "mga" Option "hw cursor" "off" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Display Merged" Device "MATROX CARD 1" Monitor "Display Merged" DefaultDepth 16 Option "Monitor2Position" "RightOf" Option "MergedFB" Option "MetaModes" "1600x1024-1280x1024 " Option "Monitor2HSync" "30.0-96.0 " Option "Monitor2VRefresh" "50.0-160.0 " SubSection "Display" Virtual 2880 1024 Depth 16 Modes "1600x1024" "1280x1024" EndSubSection EndSection Section "ServerLayout" Identifier "Matrox PowerDesk configured." Screen "Display Merged" 0 0 InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" Option "Xinerama" "on" EndSection ATI Rage Mobility video card The maximum resolution supported by this chipset in frame-buffer mode is 800x600 in 16 bpp (vga=0x315 in /etc/lilo.conf) This chipset is also supported by XFree 3.3.6 with the Mach64 driver and a patch available at [1326]http://www.staikos.on.ca/~staikos/tp1460/XFMa64-Rage-Thin kpad.patch. A precompiled X server is available at this address : [1327]http://www.0wned.org/XFMa64-Rage-Thinkpad.tar.gz. FireGL 2/4 card This serveur is available from the ATI site at [1328]http://support.ati.com/drivers/ To enable multi-screen with FireGL4, set the monitor resolution to a supported multi-screen resolution like 2560x1024 in the /etc/X11/XF86Config-4 file. The firegl driver recognizes this and sets up multi-screen when the Xserver starts. Make sure you have two monitors set up and connected to the two DVI ports on the FireGL4 card. The firegl driver supports several XFree86 options through the file /etc/X11/XF86Config-4. Values indicated in the example correspond to the default values. Section "Device" Identifier "FIRE GL2" Driver "firegl" Option "Overlay" "off" # Use this option to enable limited overlay plane support. # NOTE: currently this is not intended to support the running of applications i n the overlay planes. # Number of 4k DMA buffers used per OpenGL context. # number of 4k DMA buffers used per OpenGL process by texture manager. # parameter command line passed to firegl kernel module # Example:Option "KernelModuleParm" "maxlockedmem=64;agpgart=2" # Option list: # maxlockedmem: Maximum locked DMA memory # Maximum locked display list memory # Value 0, use firegl built-in support, value 2, disable firegl built-in AGP GA RT support if an agpgart module is loaded, it will be used, value 3, disable AG P GART support # agp_try_unsupported: try unsupported chipsets Option "OffScreenPixmaps" "no" # enables the use of frame buffer memory to save/generate pixmaps. Option "BIOSInfo" "no" # enable BIOS version output to the XFree86.0.log file Option "HW Cursor" "yes" # Enable HW Cursor Option "enable DVI" "no" # enable DVI connector(s) (always enabled in dual mode (Fire GL3/4) Option "no_accel" "no" # Disable XAA hardware acceleration Option "NoDDC" "no" # disables PnP Monitor functionality such as automatic mode configuration (This important for Fire GL3/4 users who want to work with dual screen modes) Option "AGPSpeed" "-1" # 0 for AGP off, 1 for AGP 1x, 2 for AGP 2x, 4 for AGP 4x, -1 for "Query Chipse t" # EndSection GD 5465 video card To use a Cirrus Logic GD 5465 AGP card, with a version below Xfree86 3.3.3, you have to use an option in the file XF86Config : Option "xaa_no_color_exp". Section example : Section "Device" [...] Identifier "CL-GD5465" VendorName "Cirrus" BoardName "GD5465" VideoRam 2048 Option "xaa_no_color_exp" EndSection Some users who had problems with the support of this chipset were more satisfied with the use of the "sw_cursor" option. Elsa Gloria Synergy card Specifications of that card should be consulted on Elsa web site. This card is equiped with an hardware OpenGL accelerator. Under Linux, there is an OpenGL compatible layer called Mesa. This layer begins to support hardware accelerators, and among them the 3DLabs chipset which is on Elsa Gloria cards. + [1329]Elsa web site + [1330]OpenGL web site + [1331]Mesa web site Silicon Motion LynxE card This card is only supported by the 3.3.6 version of XFree86 and upper. Nevertheless, even in that version, this is a preliminary support, which isn't as stable as the Frame Buffer mode. On the other hand, to be able to install a RedHat 6.1 version, you should do that in text mode, because the server provided (3.3.5) doesn't support this card. If you have a dual-boot system, booting first on Windows, and initialize the card through its driver seems to improve the operations then under Linux (warm reboot). Versions of XFree86 above 4.0.2 also offer the support of this chipset. Intel i810/i815 card (Informations provided by Frédéric Dubuy, Anne-Marie Mahfouf and Jean-Bernard Chaffardon) These cards are only supported with a specific X server XFCom_i810/5 downloadable in both format [1332]RPM or [1333]tar.gz and a complementary module for the kernel agpgart, downloadable in both format [1334]SRPM or [1335]tar.gz (old). Detailed documentations on the installation are provided at [1336]http://www.linux-france.org/article/x/GuideIntel810/book1 .html and [1337]ftp://download.intel.com/support/graphics/intel815/releas e_linux.pdf To summarize, once the X server installed, the module compiled and installed, it's sufficient to modify with the following parameters the file /etc/X11/XF86Config : Section "Device" [...] Identifier "i810" [...] EndSection [...] Section "Screen" [...] Driver "svga" Device "i810" [...] EndSection You have to note that the agpgart module provided by Intel should replace the one delivered in the kernel so that it works. You then have to reinstall it, particularly when a kernel update occurs. Intel i845 card These cards are only supported with a 4.3.0 XFree86 server or upper. Cf also: [1338]http://support.intel.com/support/graphics/intel845g/linux .htm S3 Savage 4 card This card is only supported with a specific X server downloadable at [1339](Original: [1340]ftp://ftp.s3.com/pub/s3/desktop/395/395_xf86_1011.tar.gz) You may also look at [1341]http://www.probo.com/timr/savage40.html nVidia card Non free drivers are proposed by nVidia at [1342]http://www.nvidia.com/view.asp?IO=linux_display_archive (ia32) and [1343]http://www.nvidia.com/view.asp?IO=linux_ia64_display_arch ive (ia64) Frame Buffer To use the Frame Buffer mode, please consult the following documents [1344]http://www.medasys-digital-systems.fr/linux/framebuffer.h tml and [1345]http://www.linuxdoc.org/HOWTO/Framebuffer-HOWTO.html. Dual head with XFree86 It's possible to use XFree86 in dual-head mode. The following example of configuration is provided by S. Eranian for a Matrox G200 AGP and a ATI Rage 128 PCI card. "The key element is that you must specify the PCI id for both cards." # /etc/X11/XF86Config-4 # File generated by xf86config. # # Copyright (c) 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. # SubSection "extmod" # Option "omit xfree86-dga" # don't initialise the DGA extension # EndSubSection Load "extmod" # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" # This loads the GLX module Load "glx" # Load "dri" EndSection Section "DRI" Mode 0666 EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/opt/fonts" # The module search path. The default path is shown here. ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Option "XkbRules" "xfree86" Option "XkbModel" "pc101" Option "XkbLayout" "us" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" # Option "Protocol" "PS/2" Option "Protocol" "imps/2" Option "ZAxisMapping" "4 5" Option "Device" "/dev/mouse" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "HP4331D" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 30-82 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 48-150 ++vsync EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown" # The chipset line is optional in most cases. It can be used to override # the driver's chipset detection, and should not normally be specified. # Chipset "generic" # The Driver line must be present. When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module. Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section. Driver "vga" # The BusID line is used to specify which of possibly multiple devices # this section is intended for. When this line isn't present, a device # section can only match up with the primary video device. For PCI # devices a line like the following could be used. This line should not # normally be included unless there is more than one video device # intalled. # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 EndSection # Device configured by xf86config: Section "Device" Identifier "G200" Driver "mga" BusID "PCI:4:0:0" #VideoRam 8192 VideoRam 8192 # Option "SWCursor" # Option "ShadowFB" # Option "PciRetry" # Insert Clocks lines here if appropriate EndSection Section "Device" Identifier "permedia2" Driver "glint" BusID "PCI:1:8:0" #VideoRam 4096 #VideoRam 4096 # Insert Clocks lines here if appropriate EndSection Section "Device" Identifier "rage" Driver "r128" BusID "PCI:01:08:00" EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen 1" Device "rage" Monitor "HP4331D" DefaultDepth 16 Subsection "Display" Depth 8 Modes "640x480" "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 # Modes "800x600" "1024x768" "1280x1024" Modes "1024x768" "1280x1024" "640x480" "800x600" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 # Modes "640x480" "800x600" "1024x768" "1280x1024" Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "Screen" Identifier "Screen 2" Device "G200" Monitor "HP4331D" DefaultDepth 16 Subsection "Display" Depth 8 Modes "640x480" "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 # Modes "800x600" "1024x768" "1280x1024" Modes "1280x1024" "640x480" "800x600" "1024x768" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "640x480" "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Simple Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. # Screen "Screen 1" Screen "Screen 1" "" "" "" "Screen 2" Screen "Screen 2" "" "" "Screen 1" "" # Screen "Screen 2" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection Aic7xxx The latest version of the aic7xxx driver is available from the [1346]reference site. Driver update disks for various distributions RedHat 7.x, 8.0, SuSE 7.x 8.0 may be downloaded from the site of [1347]Adaptec Aic79xx The latest version of the aic79xx driver is available from the [1348]reference site. This driver has been integrated in the standard kernel 2.4.21. Driver update disks for various distributions RedHat 7.x, 8.0, SuSE 7.x 8.0 may be downloaded from the site of [1349]Adaptec ncr|sym53c8xx The latest version of the ncr|sym53c8xx driver is available from the [1350]reference site. A driver disk for the RedHat distribution is available at the following address for the versions [1351]6.2 and [1352]7.0. To use a driver disk on a RedHat 6.2 distribution, you need to boot with the latest boot disk made by RedHat. Either by remaking a CD-ROM containing it, or by using it directly. It"s available at the following address [1353]ftp://ftp.redhat.com/pub/redhat/linux/updates/6.2/en/os/i mages/i386/boot-20000407.img D6692A card To use the D6692A card, you need to use a 2.1.122 kernel at least. Previous kernels didn't handled correctly the shared IRQ between the network and SCSI parts of the card. In particular, a standard RedHat 5.2 version doesn't allow to the network part to be supported. You have to update your kernel with a recent one (preferably 2.4.21) and the distribution with the complementary packages needed. X4000 Some X4000 configurations had incompatibilities with Linux resulting in boot hang. This issue is solve with the latest RedHat kernel updates (2.4.9-34 and upper). 3C59x The latest version of the 3c59x driver is available from the [1354]reference site. There is also a version provided and supported by 3Com, available at [1355]http://support.3com.com/infodeli/tools/nic/linuxdownload. htm. There are also other drivers available at [1356]ftp://ftp.scyld.com/pub/network/test/3c59x.c and [1357]http://www.uow.edu.au/~andrewm/linux/#3c59x-bc. 3C556 This card is supported by kernel 2.2.17 and upper. e100 Intel driver A driver is provided by Intel to support its cards based on the PRO/100 model, in its various versions. Depending on the model, you'll have a better support with this one, or with the standard eepro100 provided in the Linux kernel. It should allow a systematic support of the latest models. It's available at [1358]ftp://aiedownload.intel.com/df-support/2896/eng If you use the e100 driver, you could also use the ANS tools (Advanced Network Services) allowing you to do AFT (Adapter Fault Tolerance), ALB (Adaptive Load Balancing, including AFT), FEC or 802.3ad (Link Aggregation). For more details on these modes, please refer to the file associated with the file to download called readme.txt. It's available at [1359]ftp://aiedownload.intel.com/df-support/2895/eng To use this functionality, proceed as follow: #ifconfig ethx down # For all adapters of the team #ianscfg -a -tTEAM # Create the team #ianscfg -C -tTEAM -Mmode # Determine the mode of the team #ianscfg -a -tTEAM -methx # Add the interface ethx to the team #ianscfg -a -tTEAM -vveth0 # Create the virtual interface veth0 associated to t he team #ianscfg -c -tTEAM # Activate the team #ianscfg -w -f/etc/ians.conf # Save the configuration #ifconfig veth0 xxx.yyy.zzz.ttt ... # Configure the virtual interface as usual Other tools around this driver may be found on Intel's web site: [1360]http://appsr.intel.com/scripts-df/filter_results.asp?strO Ss=39&strTypes=PLU%2CDRV%2CSPH%2CUTL&ProductID=416&OSFullName=L inux*&submit=Go%21 To use correctly the VE model of this network card (e-PC 40 e.g.), with a SusE 7.2 distribution, it is mandatory to upgrade it with the updates available at [1361]ftp://ftp.suse.com/pub/suse/i386/update/7.2/ Intel PRO/100 card (HP version) (10/100BT) In addition to the previous point, HP provides a certified driver (e100 for RedHat/SuSE) for this card at the following address: [1362]ftp://ftp.compaq.com/pub/products/servers/supportsoftware /linux e1000 Intel driver A driver is provided by Intel to support its cards based on the PRO/1000 model. It's available at [1363]ftp://aiedownload.intel.com/df-support/2897/eng If you use the e1000 driver, you could also use the ANS tools (Advanced Network Services) allowing you to do AFT (Adapter Fault Tolerance), ALB (Adaptive Load Balancing, including AFT), FEC or 802.3ad (Link Aggregation). For more details on these modes, please refer to the file associated with the file to download called readme.txt. It's available at [1364]ftp://aiedownload.intel.com/df-support/2895/eng To use this functionality, proceed as in paragraph [1365]e100. Intel PRO/1000 card (HP version) (10/100BT) In addition to the previous point, HP provides a certified driver (e1000 for RedHat/SuSE) for this card at the following address: [1366]ftp://ftp.compaq.com/pub/products/servers/supportsoftware /linux Wake on Lan The Intel Pro/100 and 3Com 3C59x network cards used in majority in HP machines support the Wake on Lan function (WOL). All the details on [1367]http://www.scyld.com/expert/wake-on-lan.html, Sound Chipset ESS Maestro The chipset 2EM (Vendor id: 125d - device id: 1978) is supported in 2.2.14 kernel and upper. Version 3 (Vendor id: 125d - device id: 1998) on the other side is supported in 2.2.19pre5 kernel and upper. Cf : the site of the [1368]maestro3, driver, the Alsa^[1369]Rem. project (version >= 0.5.10) driver, and the commercial software [1370]Open Sound System . The latest version of the ESS Maestro driver is available from the [1371]reference site. Sound Chipset AD1816 The latest version of the AD1816 driver is available from the [1372]reference site. For Visualize workstations, it's recommended by HP to put in /etc/conf.modules : alias sound ad1816 pre-install sound /sbin/insmod sound dmabuf=1 options ad1816 io=0x500 irq=5 dma=0 dma2=3 ad1816_clockfreq=33000 alias midi opl3 options opl3 io=0x388 (Source : [1373]http://www.hp.com/visualize/support/technotes/linux) Sound Chipset SB Live The latest version of the SB Live driver is available from the [1374]reference site. Alsa Sound Drivers The Alsa project has for primary goals to develop drivers to support sound cards in Linux, being fully compatible with current OSS drivers, bringing more functionalities and supporting more hardware. All the information on this project, as well as sources under the GPL license, are available from their home page [1375]http://www.alsa-project.org RPMs for RedHat 6.2 and Turbo Linux 6.0 distribution are available at the address [1376]http://hp-linux.org/aau/alsa Sound Chipset Aztec 2320 For machines equipped with this chipset, Chuck Slivkoff reports that it works when you put the following parameters in /etc/conf.modules : alias char-major-116 snd alias char-major-14 soundcore post-install snd /sbin/modprobe snd-card-azt2320 pre-install snd-card-azt2320 /sbin/modprobe isapnp post-remove snd-card-azt2320 /sbin/modprobe -r isapnp post-install snd-card-azt2320 bash -c ' /sbin/modprobe snd-mixe r-oss; /sbin/modprobe snd-pcm-oss; ' Note that pre-install may create problems and i's recommended to replace the line containing it with: below snd-card-azt2320 isapnp (Source : [1377]http://www.uwsg.iu.edu/hypermail/linux/kernel/0110.3/0304 .html. Thanks to Mike Castle) Intel sound cards For Intel sound cards you may want to get the latest informations from [1378]http://support.intel.com/support/graphics/linux/audio.htm DOS models These models are delivered with MS-DOS only, in order to have a Linux Machine at the best price. Turbo Linux models These models are delivered ready to be installed with Turbo Linux, in order to have a Linux Machine at the best price (2 CDs + 30 days of support). RedHat models These models are delivered preloaded with a improved distribution based on RedHat (shameless plug, as I did it :-) e-PC 40 and Mandrake On this configuration in version Mandrake 8.0, it seems that the kapmd daemon uses too much CPU. It's so recommended to apply patches or to desactivate it. $ ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.1 0.4 1364 532 ? S 10:15 0:04 init [5] root 2 0.0 0.0 0 0 ? SW 10:15 0:00 [keventd] root 3 65.1 0.0 0 0 ? SW 10:15 30:11 [kapm-idled] root 4 0.0 0.0 0 0 ? SW 10:15 0:00 [kswapd] [...] With the 9.0 version, you have to give the noapic parameter at system boot time. XU800 On that machine, the Bios doesn't give the right amount of memory which is in the machine to Linux. You need to use a line such as append="mem=xxxM" at the begining of /etc/lilo.conf where xxx is your RAM in MB. The support of "big size" IDE disks (for example, 27 GB disks provided for the XU 800) on these machines needs a kernel 2.2.15 at least. X2100 This machine had problems with some early BIOSes that may prevent keyboard/lan to work properly under Linux. Download the latest one from HP Web site in case of issue or grab a local copy at [1379]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/Biosx 2100-JGW102US.rom Omnibook XE If you intend to use both the sound chipset and a PCMCIA card in this laptop, in order to avoid conflicts at input/output ports level, you'll have to modify the file /etc/pcmcia/config.opts to change the line 6 to include port 0x300-0x4ff, port 0x1000-0x17ff The NSC PC87108/338 chipset controlling IrDA on this model is supported by the 2.4.21 kernel. (Source : [1380]http://www.bits.bris.ac.uk/madmatt/laptop.shtml) Some users had to apply the same tric for their Omnibook 4150 with success. Omnibook xe4500/xt6200 This laptop uses an Ali chipset M5529 whose driver is available for kernel 2.2 at [1381]ftp://ftp.aliusa.com/driver/linux-ide-10b3.tgz For kernel 2.4.18 (RedHat 8.0), you may use at boot prompt the option idebus=50 or idebus=66 and/or nousb depending of the contributor Omnibook XE3 It is recommended to not launch /sbin/halt under X11. The integrated modem card is not normaly supported under Linux (ESS ES56CVM-PL). Nevertheless, Jean-Bernard Chaffardon has published a binary version of a driver for the kernel 2.4.18-2mdk of Mandrake distribution 8.x. It's always possible to try to use it with /sbin/insmod -f. The driver is available at [1382]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/ES283 9_4Linux2_4_18-2mdk.zip (XE3 GF) and [1383]http://luftstrom.bastun.net/ess-modem-1989.tar.gz (XE3 GC). Soos Peter adds "I tried fixscript originally developed for Lucent binary kernel modules, and wrote a little install script to install esscom.o on any 2.4.x kernel. I had succesful installation with 2.4.9-31 RedHat kernel and 2.4.18 (see below). I had some problem with the driver itself: + If I attach the modem to the telephone line after loading module on a XE3-GF, the machine completly frozen. + The driver does not support the modem in XE3-GC. # cat install mkdir -p /lib/modules/`uname -r`/misc ./fixscript esscom.o /lib/modules/`uname -r`/misc/esscom.o rm -f /dev/essmodem mknod /dev/essmodem c 127 1 rm -f /dev/modem ln -sf essmodem /dev/modem mv /etc/modules.conf /etc/modules.conf.orig grep -v "alias.*esscom" /etc/modules.conf.orig > /etc/modules.conf echo alias char-major-127 esscom >> /etc/modules.conf depmod -a # cat fixscript echo "Fixscript V1.8" OTHERMODULES= while : ; do case "$1" in "-m" ) shift if [ -f "$1" ] ; then OTHERMODULES="$OTHERMODULES $1" else echo "ERROR: module $1 doesnt exist" exit 1 fi shift ;; *) break;; esac done if [ -z "$1" -o -z "$2" ]; then cat < $MI echo -ne `objdump -s -j .modinfo $1 | awk 'BEGIN{v=0;} /Contents/ {v=1; next; } { if (v==1) print $0; }' | cut -c7-41 | awk '{ printf($0); }' | sed 's/ //g;s/../\\\\x&/g;'` | tr '\000' '\n' | awk '/^kernel_version=/ { next;} {print $0;}' | tr '\n' '\000' >> $MI CMD="objcopy" for i in `$DEPMOD -e $1 $OTHERMODULES 2>&1 | sed 's/depmod://g' | grep -vE "^$1 :|Unresolved symbols|^#|:$"` ; do echo -n doing $i i1=`echo $i | awk '{ gsub(/_R[0-9a-fA-F]+/,""); printf("%s", $1); }'` echo -n " trunc=$i1" new=`awk '/ '$i1'_R/ { printf("%s", $2); }' < /proc/ksyms` if [ -z "$new" -a -n "$OTHERMODULES" ]; then new=`nm $OTHERMODULES | grep " *T " | awk '/ '$i1'_R/ { printf("%s", $3); }'` fi echo " new=$new" if [ -n "$i" -a -n "$new" ] ; then CMD="$CMD --redefine-sym=$i=$new" else echo "ERROR: Symbol $i not found in kernel symbols." echo "Insert the appropriate module and try again." fi done CMD="$CMD --redefine-sym=register_serial=register_lucent" CMD="$CMD --redefine-sym=unregister_serial=unregister_lucent" CMD="$CMD --redefine-sym=serial_console_init=ltmodem_console_init" CMD="$CMD --remove-section=.modinfo --add-section=.modinfo=$MI" CMD="$CMD $*" $CMD rm -f $MI The installation of a RedHat 6.2 distribution gives a problem when rebooting the system, at the PCMCIA initialisation. You have to install the latest version of the pcmcia-cs package at [1384]ftp://pcmcia-cs.sourceforge.net/pub/pcmcia-cs/ To use the network with this distribution, you need a tulip driver modified by P. "goldpenguin" Depouilly, and available at [1385]http://www.math.u-bordeaux.fr/~depouill/XE3/tulip.tar.gz Oliver Tharan reports that models equiped with a Savage chip may encounter some problems with ICA or Starffice. Some answers may be found at [1386]http://www.probo.com/timr/savage40.html Gabor Fleischer has developped a modified DSDT for a better ACPI support of the XE3 GF. Download it at [1387]http://progs.fleischer.hu/XE3-GF/DSDT/HP_OmniBook_XE3-GF_ DSDT.asl Omnibook 600 Pop-up mouse is supported. Olivier Florent wrote the original linux code. Grant Grundler rewrote it and published it. See [1388]obmouse.sourceforge.net Omnibook 4150 If you use the Adaptec APA-1480 SCSI PCMCIA card, It must be in the top slot. If you don't put it in the top slot, the card that is in the top slot will not work. Also, even though the APA-1480 was supported long before this, the first time it worked on an Omnibook was kernel 2.2.16. There was some problems with the earlier cardbus drivers and the Omnibook. (Information from Bruce Kives) Omnibook 6000 reboot doesn't work correctly on this machine, which remains blocked instead of rebooting. Use the poweroff button to reset it. A BIOS > 1.81 seems to fix the issue. (Information from Yuthay Yean) Omnibook 6100 The PCMCIA driver on this machine is yenta_socket (in /etc/sysconfig/pcmcia) To use the embedded wireless LAN on this machine you need: [1389]wireless-tools and [1390]driver prism2_pci and do the following operations: #modprobe orinoco_cs Load the driver #/etc/rc.d/init.d/pcmcia restart restart the pcmcia stack #vi /etc/pcmcia/wireless.opts Configure the wireless interface #iwconfig eth1 Verify the status of the wireless interface #ifconfig eth1 your.ip.address.thatyouwant Configure the IP layer Pages dedicated to that notebook are available at [1391]http://www.senecass.com/rob/omnibook6100.html, [1392]http://www.nyx.net/~dwiebold/omnibook6100-linux.html and [1393]http://www.rag.com.au/linux/6100howto.html B models B models use Ultra 3 SCSI sym53c1010 (A models use ultra 2). To use the native SCSI bus of this machine, it"s necessary to use the sym53c8xx driver with a version upon 1.6c. A driver disk for RedHat distributions is available for versions [1394]6.1, [1395]6.2 and [1396]7.0. For the SuSE 7.0 distribution, you have to enter the manual mode to load the driver, as autodetection doesn"t work correctly. LC 2000 In order to use the native SCSI controler you need to disable in the Bios the option "Reserve PCI Bus Numbers", in the menu PCI Device Setting (Indication of Gillynn Couch). Models P3493B and P5364B are equiped with an additional NetRaid 1M card. LP1000r/LP2000r To use the native SCSI bus of this machine, it"s necessary to use the sym53c8xx driver with a version upon 1.6c. A driver disk for RedHat distributions is available for versions [1397]6.1, [1398]6.2 and [1399]7.0. For the SuSE 7.0 distribution, you have to enter the manual mode to load the driver, as autodetection doesn"t work correctly. TC 3100/4100 To install this machine under RedHat 6.2, you have to follow the following steps provided by Gallig Renaud : + Desactivate the LAN card in the BIOS + Do a RedHat 6.2 install with the driver disk available at [1400]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/dd6 2-ami.img To use a driver disk on a RedHat 6.2 distribution, you need to boot with the latest boot disk made by RedHat. Either by remaking a CD-ROM containing it, or by using it directly. It"s available at the following address [1401]ftp://ftp.redhat.com/pub/redhat/linux/updates/6.2/en/os /images/i386/boot-20000407.img + Apply 6.2 updates in that order #rpm -Uvh rpm* db3* #rpm --rebuilddb #rpm -Uvh mount* nfs-util* #rpm -ivh kernel*i686* #rpm -Fvh *.rpm + Do the initrd for the new kernels (man mkinitrd - hint: /sbin/mkinitrd /boot/initrd-2.2.19-xx.img 2.2.19-xx) + If you use lilo, re-run it lilo + Reboot + Reactivate the LAN card in the BIOS + The system will automatically detect the new hardware component + Modify the file /etc/module.conf and remplace eepro100 by e100 (with eepro100 you have error messages such as card reports no resources, card reports no RX buffers) + Type the following commands to validate this change #service network stop #rmmod eepro100 #service network start + Enjoy ;-) LH 6000 In order to use the native SCSI controler you may need to desactivate in the Bios the "reserver PCI Bus #s", in the menu PCI Device Setting. The PS/2 system doesn't work correctly with a RedHat 6.1 or 6.2 distribution. In order to correct that you need to either put the machine in MPS 1.1, in the BIOS, or use a kernel above 2.3.47 in MPS 1.4 mode. The network card doesn't work correctly with the kernel of the RedHat 6.2 distribution. LT 6000r In order to use the native SCSI controler you need to desactivate in the Bios the "reserver PCI Bus #s", in the menu PCI Device Setting. BX Chipset Intel BX Chipset (Memory Bus at 100 MHz) is supported by [1402]kernels above 2.0.34/2.1.103. DL 360/380 G3 To install/use these machines under redHat 7.3 or 9, you have to pass the following parameter on the command line at boot time ide=nodma. You may also use the following command in the file /etc/rc.local /sbin/hdparm -d0 /dev/hda If the fans of DL360 G3 machines do not have an acceptable noise level after the boot either you install the [1403]hpasm driver for your distribution, or you update the BIOS of your machine (2003-04-08 or upper) [1404]P31 DL 580 G2 Christian Franck reports an issue of SCSI timeout while using a SCSI card C7474A (Adaptec 29160). His solution was to put the card in a non hot plug slot. DL 760 G2 When activating Hyper-Threading (HT) on the machine in the BIOS, the system boots correctly as it seems (detecting the 16 CPUs it should detect) but then it hangs during the remaining phases of the boot. To correct the issue, you need to use at least a vanilla 2.4.21 kernel + the patch ac4 + a small additional patch made by Venkatesh Pallipadi --- linux-2.4.21-ac2/arch/i386/kernel/mpparse.c.org 2003-06-30 12:52:21.000 000000 -0700 +++ linux-2.4.21-ac2/arch/i386/kernel/mpparse.c 2003-06-30 12:54:40.000000000 - 0700 @@ -987,7 +987,10 @@ { struct mpc_config_processor processor; int boot_cpu = 0; - + + static unsigned long apic_ver; + static int first_time = 1; + if (id >= MAX_APICS) { printk(KERN_WARNING "Processor #%d invalid (max %d)\n", id, MAX_APICS); @@ -999,7 +1002,18 @@ processor.mpc_type = MP_PROCESSOR; processor.mpc_apicid = id; - processor.mpc_apicver = 0x10; /* TBD: lapic version */ + + if (first_time) { + first_time = 0; + set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE); + Dprintk("Local APIC ID %lx\n", apic_read(APIC_ID)); + apic_ver = apic_read(APIC_LVR); + Dprintk("Local APIC Version %lx\n", apic_ver); + if (APIC_XAPIC_SUPPORT(apic_ver)) + xapic_support = 1; + } + processor.mpc_apicver = apic_ver; + processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0); processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0); processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | And your .config should contain something like CONFIG_X86=y CONFIG_UID16=y CONFIG_MODULES=y CONFIG_KMOD=y CONFIG_MPENTIUM4=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_HAS_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_F00F_WORKS_OK=y CONFIG_X86_MCE=y CONFIG_HIGHMEM64G=y CONFIG_HIGHMEM=y CONFIG_X86_PAE=y CONFIG_HIGHIO=y CONFIG_MTRR=y CONFIG_SMP=y CONFIG_X86_CLUSTERED_APIC=y CONFIG_X86_TSC=y CONFIG_HAVE_DEC_LOCK=y CONFIG_NET=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_PCI=y CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y CONFIG_SYSVIPC=y CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y CONFIG_BINFMT_ELF=y CONFIG_ACPI=y CONFIG_ACPI_HT_ONLY=y CONFIG_ACPI_BOOT=y CONFIG_BLK_DEV_FD=y CONFIG_BLK_CPQ_CISS_DA=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_CMD640=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_PIIX=y CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_SVWKS=y CONFIG_IDEDMA_AUTO=y CONFIG_BLK_DEV_IDE_MODES=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_SG=m CONFIG_SCSI_DEBUG_QUEUES=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_NETDEVICES=y CONFIG_DUMMY=m CONFIG_BONDING=m CONFIG_TIGON3=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y CONFIG_SERIAL_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_MOUSE=y CONFIG_PSMOUSE=y CONFIG_AUTOFS4_FS=y CONFIG_REISERFS_FS=y CONFIG_REISERFS_PROC_INFO=y CONFIG_EXT3_FS=m CONFIG_JBD=m CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y CONFIG_PROC_FS=y CONFIG_DEVPTS_FS=y CONFIG_EXT2_FS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_SMB_FS=m CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_VGA_CONSOLE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y Then linux:~ #cat /proc/cpuinfo | grep processor |wc -l 16 :-)) Hyper Threading (HT) With the new Xeon processors (DP and MP) you have a new function available called hyperthreading. This allows you roughly to have 2 processors (logical) in 1 (physical). RedHat (7.3 and upper) has a kernel which supports this new feature in standard. The previous versions (Mandrake 8.2 and RedHat 7.2) do NOT support hyperthreading in standard so the machines with HT processors using these distro will only see one proc. BTW, it seems that there is a patch available in RedHat kernels from 2.4.9 on. Look at the sources of the RedHat kernel, it's called linux-2.4.9-hyperthreading.patch and is available with the latest RedHat updates for 7.2. i820 Chipset Coppermine 0.18 µm technology - 256 kB synchronous cache - Intel i820 Chipset P4 - i850 Chipset These machines are equiped with a Pentium IV processor, supported by kernels 2.2.18/2.4.0 and above. The RedHat 7.0, Mandrake 7.2 and TurboLinux 6.1 distributions, e.g., can be installed correctly on this kind of machines. BAx Attention, the XF86_SVGA server works correctly with this mother board embedded version only above XFree86 3.3.5, due to the use of different frequencies (In particular, use the updates for RedHat 5.2/6.0). Boot disk for 3Com card Creation of a custom RedHat 5.1 Boot disk To be able to boot with the RedHat 5.1 boot disk, and to have the support of the 3C905B-TX card, you need to do the following : Log as root. Go in the home directory (~root) #cd ~ Put there the 3c59x.c source module for the 3Com card #ncftp ftp://ftp.scyld.com/pub/network/3c59x.c Compile it #gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c 3c59x.c `[ -f /usr/ include/linux/modversions.h ] && echo -DMODVERSIONS` put the RedHat 5.1 floppy boot disk in the drive you have to copy the initrd.img file from the floppy disk #mcopy a:initrd.img /tmp then uncompress it #gzip -cd /tmp/initrd.img > /tmp/initrd.ext2 Mount the "file" filesystem thus obtained #mount -t ext2 /tmp/initrd.ext2 /mnt/floppy -o loop uncompress the modules provided #gzip -cd /mnt/floppy/modules/modules.cgz > /tmp/modules.cpio extract the modules #cd /tmp ; mkdir modules ; cd modules ; cat /tmp/modules.cpio | cpio -i Copy the new updated module for the 3Com card #cp ~/3c59x.o . recreate the compressed cpio file #ls | cpio -o | gzip -c9 > ../newmodules.cgz replace the modules by their update #cp ../newmodules.cgz /mnt/floppy/modules/modules.cgz unmount the "file" filesystem #umount /mnt/floppy compress the "file" filesystem #gzip -c9 /tmp/initrd.ext2 > /tmp/initrd.img copy it on the floppy disk #mcopy /tmp/initrd.img a: 3Com 996/Broadcom 5700 card (10/100/1000BT) This driver is provided with latest RedHat 7.1-8.0/Mandrake 8.0-9.0 distributions, as kernel patches, but isn't included yet in the standard 2.4 kernel. 3Com 996/Broadcom 5700 card (HP version) (10/100/1000BT) In addition to the previous point, HP provides a certified driver (bcm5700 for RedHat/SuSE) for this card at the following address: [1405]ftp://ftp.compaq.com/pub/products/servers/supportsoftware /linux Tigon 3 card (HP version) (10/100/1000BT) Boot/Driver disk for RedHat distribution To be able to boot with a RedHat distribution (>6.1), and to have the recognition of a peripheral non supported in standard in the distribution, you need to do the following : Download the delopment toolkit to create driver disk for the RedHat distribution at the following address: [1406]http://people.redhat.com/dledford Install the sources of the driver in a directory and follow the instructions of the README file of the kit to create the modules necessary for the various kernel of the distributions. Log as root. (~root) put the RedHat floppy boot disk to modify in the drive you have to copy the initrd.img file from the floppy disk #mcopy a:initrd.img /tmp then uncompress it #gzip -cd /tmp/initrd.img > /tmp/initrd.ext2 Mount the "file" filesystem thus obtained #mount -t ext2 /tmp/initrd.ext2 /mnt/floppy -o loop create a temporary directory #cd /tmp ; mkdir modules ; cd modules uncompress and extract the modules provided #gzip -cd /mnt/floppy/modules/modules.cgz | cpio -ivdum Copy the new updated module. In case you add it, remove also other useless modu les of the same size. #cp ~/.../mod_devel_kit/rhxx/modules/x.y.z-iBOOT/module.o x.y.z-iBOOT Also in case you add it, copy the modules needed for the installed kernel durin g reboot, and adapt the files pcitable, module-info and modules.dep by using th e information provided in the development kit. #cp -a ~/.../mod_devel_kit/rhxx/modules/x.y.z-i ~/.../mod_devel_kit/rhxx/module s/x.y.z-ismp . #vi /mnt/floppy/modules/pcitable /mnt/floppy/modules/module-info /mnt/floppy/mo dules/modules.dep recreate the compressed cpio file #find * -print -depth | cpio -ov -H crc | gzip -c9 > /mnt/floppy/modules/module s.cgz unmount the "file" filesystem #umount /mnt/floppy compress the "file" filesystem #gzip -c9 /tmp/initrd.ext2 > /tmp/initrd.img copy it on the floppy disk #mcopy /tmp/initrd.img a: Boot/Driver disk for SuSE distribution To be able to boot with a SuSE distribution (>7.1), and to have the recognition of a peripheral non supported in standard in the distribution, you need to do the following : Cf: [1407]http://sdb.suse.de/en/sdb/html/hmeyer_driver_update.html Boot/Driver disk for Mandrake distribution To be able to boot with a Mandrake distribution and to have the recognition of a peripheral non supported in standard in the distribution, you need to do the following : Cf: [1408]http://cvs.mandrakesoft.com/cgi-bin/cvsweb.cgi/~checkout~ /gi/mdk-stage1/doc/UPDATEMODULES?rev=1&content-type=text/plain LH 4 The LH4 doesn't seem to work correctly when not in Raid. Even with the latest Bios available at the time of the test (16.00), the problem remains. If you desactivate the Raid management, during the boot, the ncr53c8xx driver in Linux detects 4 controlers instead of 2 and boot doesn't end. To avoid that, you have to activate the Raid in the Bios and use each of the disk in Raid0 mode, which is quite the same as the solution without Raid at all. This machine can not be installed correctly with RedHat 7.1 or Mandrake 8.0 distributions. NetRaid card These cards are equiped with an [1409]AMI Megaraid chipset and may support the following Raid levels : 0, 1, 3, 5, 10, 30 and 50. AMI has recently sold his Megaraid division to LSILogic and information is now available from [1410]http://www.megaraid.lsilogic.com/ Some NetRaid cards, as well as the chipset integrated on the LH3 and LH4 mother boards are supported by recent version of the Linux kernel (2.0.36/2.2.19/2.4.21 typically - don't use 2.0.37/38). For the RedHat 5.2 distribution, it's not possible to install the system on this type of controler, because it's not detected by the installation program. You have to use a specific [1411]floppy disk . This floppy disk should be used as input to the rawrite tool, for example. It works for systems with less than 1 GB of memory. For the RedHat 6.0 distribution, you have to manually declare the existence of this card as a supplementary SCSI adapter, in order to use it directly during the installation. The megaraid driver isn't automatically detected. To avoid strange messages during the boot printed by the megaraid driver, it's necessary to recompile it with the option -DHP (before kernel 2.4.2) or -DMEGA_HP_FIX (after) or even nothing now (> 2.4.13). For the RedHat 6.1 distribution, the megaraid driver provided by the kernel does support only the first logical drive. In order to obtain the others, please recompile a 2.2 standard kernel. You have to note that the integrated card of the LH3/4 realises a software parity checks and performs thus less efficiently than the NetRaid daughter cards. On the other side, LH3000/6000 are equiped with an integrated card doing hardware checks. In the driver provided by AMI there is a Raid management tool megamgr, usable within Linux, and equivalent to the tool included in the software embedded on the controler. It's downloadable from [1412]http://www.ami.com/support/prodsearch.cfm?InpProdID=17 In case of problem, old versions are available there [1413]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/107.z ip, [1414]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/1e08. zip and [1415]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/mega1 15.tgz,. Kernel patches and utility to monitor logical/physical drives on MegaRAID (NetRAID) Adapters have been made by Katsuyuki Yumoto. "This can detect physical drive failure, send E-Mail and syslog it. NetRAID-1Si/3Si, embeded NetRAID and NetRAID-1M/2M are okay to use. Don't use this for NetRAID-4M." You'll find the code at this address [1416]http://www.jpn.hp.com/software/os/linux/tech/faq/megascan -20020509.tar.gz. Use with care as the versions I tried have conducted to kernel panic. The NetRaid 1Si card isn't recognized correctly by RedHat 7.2. NetRaid 1M/2M models In addition to what is mentionned above, these models require a 1.14 version of the megaraid driver to work correctly. You may find a version of the sources of this driver at this address [1417]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/ami-m r114b.tar.gz. A driver disk for the RedHat distribution is available at the following address for the versions [1418]6.2 and [1419]7.0. To use a driver disk on a RedHat 6.2 distribution, you need to boot with the latest boot disk made by RedHat. Either by remaking a CD-ROM containing it, or by using it directly. It"s available at the following address [1420]ftp://ftp.redhat.com/pub/redhat/linux/updates/6.2/en/os/i mages/i386/boot-20000407.img You'll have data corruption by using these cards with the standard kernel of the RedHat 7.1 distribution. You necessaraly need [1421]this driver disk to use it correctly. This has been seen with both H.01.07, H.01.08 and H.01.09 firmware. Sources of the patch required to make this card work correctly with kernels 2.4.x (x < 7) are available here [1422]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/mega1 15hp.tgz. The same problème is true with the Mandrake 8.0, but the 8.1 has the right driver. This particularly applies also to MC/ServiceGuard (First version) which uses RedHat 7.1 as a base and recommend to use NetRaid cards for system disks :-) Even if NOT mentionned in the compatibility matrix by HP, these cards DO work with RedHat 7.2. You'll find here after a copy of the firmware (H.02.01) on a bootable floppy image that solves the issue mentioned here [1423]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/netra id2M.img The firmware version K.01.05 is specific to P7749A cards dedictaed to ia64 machines. It is possible to upgrade a NetRaid 2M "i386" in NetRaid 2M "ia64" by updating the firmware, thus loosing all support from HP. I have also been able to use NetRaid 2M "i386" on ia64 without problem, if drivers and firmware are uptodate (see upper). Do all this at your own risk of course. NetRaid 4M card These cards are equiped with a StrongARM Chipset and correspond to the Adaptec card AAC-3642. A driver is available at [1424]http://domsch.com/linux. The RedHat 7.0 includes in standard the driver even if that release of the kernel doesn't handle it normaly. Information are also available on the HP Navigator L.19.00. The aacraid driver as been included in the kernel in 2.4.17. Driver update disks for various distributions RedHat 7.x, 8.0, SuSE 7.x 8.0 may be downloaded from the site of [1425]Adaptec Smart Array card The latest drivers and installation floppies for the supported distributions (RedHat and SuSE) are available at the following address: [1426]ftp://ftp.compaq.com/pub/products/servers/supportsoftware /linux. HP provides a command line interface tool to configure the Smart Array card available at [1427]http://www.compaq.com/support/files/server/us/locate/3331 .html On DL380, to kickstart a RedHat 7.2 installation, Carl Riches gives parts of his ks.cfg file: %pre mkdir /dev/ida mknod /dev/ida/c0d0 b 72 0 mknod 660 /dev/ida/c0d0 echo | fdisk /dev/ida/c0d0 <map Go to the logical drive corresponding to the CD-ROM Shell>fs1: Boot the system fs1:>elilo linux (was eli linux on first models) Install your distribution as usual The only difference is that you need to create a so-called 'EFI' partition of t ype FAT32 (Id:b) of around 128 MB. This partition will be mounted as /boot/efi later After the installation, reboot and redo the initial sequence, verifying again t he correspondance (which may have changed because the CD-ROM isn't available an ymore, the numbers indicating the order of detection of bootable devices) Shell>map Shell>fs0: fs0:>dir Verify the name of the kernel to boot in elilo.conf fs0:>elilo linux-up To automate the boot, you can make the EFI shell the first option (see boot mai ntenance option). Then after a timeout the shell will automatically be launched . To avoid the interactive mode, you can create a batch file called startup.nsh on any of the EFI accessible file systems. This file does not need to be where the elilo and kernels are but it is preferrable if you want to avoid specifyin g the full pathname. If elilo and the kernel are on fs0:, then the content of s tartup.nsh could be as follows: fs0:>type -a startup.nsh fs0: elilo linux-up This supposes that the linux-up is an image label in the elilo.conf file. As op posed to LILO on ia32, elilo also accepts file names on the command line. For i nstance, you can specify: fs0:>elilo vmlinuz root=/dev/sda2 Where vmlinuz is the kernel image file itself and not a logical name. ELILO supports network booting using the PXE or DHCP protocol. Diskless booting is also possible using a NFS root fileystem. This is useful for cluster configurations. The latest version of ELILO is available at [1477]ftp://ftp.hpl.hp.com/pub/linux-ia64. You also need to gnu-efi package on the same site to compile ELILO. You need gcc-3.0 and binutils 2.11.90 or newer to compile the package. Note that ELILO can boot Linux/ia64 on IA-64 platforms but it can also be compiled for an EFI/ia32 target platform where it can boot unmodified Linux/ia32 kernel on hardware where EFI/ia32 is installed. All the most recent distributions, including RH7.1, now install their own option in the EFI boot manager which makes the above description uncessary unless you want special customization. The EFI boot manager menu is controlled by EFI variables which can be manipulated from Linux using a /proc interface (need to have kernel compiled with CONFIG_EFI_VARS). There is a tool created by Matt Domsch from Dell which allow you to customize the EFI boot manager. The tool is called efibootmgr and is available from [1478]http://www.domsch.com/linux. (From information provided by S. Eranian. A big thank for his so precious help. Only mistakes are mine :-) GPT David Mosberger reports that recent versions (7.2) of Red Hat install a GPT (GUID Partition Table) partition and that you must enable the following two config options for the kernel to recognize them: CONFIG_PARTITION_ADVANCED=y CONFIG_EFI_PARTITION=y Stéphane precises that the Redhat 7.1 distribution for IA-64 includes also support for GPT. However it is not directly visible during the install procedure. It is used by the installer ONLY when it detect that the install disk is blank, i.e., has not existing partition table. Otherwise it default to the PC-style legacy partition table. You can create or modify a GPT using the GNU parted (partition editor) program (see [1479]http://www.gnu.org/software/parted. The fdisk program DOES NOT support this kind of table. Serial mode Information provided by Nathalie Viollet If you don't have a graphical card in your server, it is possible to redirect installation messages on the server's management board (BMC) by using during the boot the following syntax Shell>fs1: fs1:>elilo linux text "console=ttyS0" To also have firmware boot messages of the system, you have to redirect EFI inputs/outputs to this console too -> Boot option maintenance menu -> Select active Console Output Device Select the Console Output Device(s) Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(PcAnsi) Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100) Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+) Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(VtUtf8) Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(PcAnsi) Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100) * Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100+) Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(VtUtf8) Acpi(HWP0002,700)/Pci(2|0) Save Settings to NVRAM Exit -> Select active Console Input Device Select the Console Input Device(s) Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(PcAnsi) Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100) Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+) Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(VtUtf8) Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(PcAnsi) Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100) * Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100+) Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(VtUtf8) Save Settings to NVRAM Exit -> Select active Console Standard Error Device Select the Standard Error Device Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(PcAnsi) Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+) Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(VtUtf8) Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(PcAnsi) Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100) * Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100+) Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(VtUtf8) Acpi(HWP0002,700)/Pci(2|0) Save Settings to NVRAM Exit -> Cold Reset /etc/inittab co:12345:respawn:/sbin/mingetty /dev/ttyS0 or co:12345:respawn:/sbin/agetty ttyS0 9600 vt100 If you have given an IP address to the BMC management board, it is then also possible to have the same functionalities as previously described by connecting to it with telnet 100% CPU Christian Franck gives this tip: If ksoftirqd_CPU takes around 100% CPU time on the Itanium 2 system, try replacing your eepro100 driver by the Intel e100 one. Crash If your ia64 machine cashes during a backup, it's normal :-(you should be using gdb on /proc/kcore; nothing else). This is reproduceable (2.4.21+ia64 patch): you just have to do #sync #cat /proc/kcore _________________________________________________________________ 3.2.5. Blade Server (Old models) Information concerning these machines are available at [1480]http://www.hp.com/products1/servers/blades/index.html * Debian: 2.2r3 kernel 2.2.19 * Debian: 3.0 * Red Hat: 7.0 kernel 2.2.16 * SuSE: 7.1 kernel 2.4.0 Dann Frazier gives the following additional information on this blade: These blades support XFree 3.3.6 (SVGA) and Xfree 4.1.0 (not sure which module, 'chips' probably). #lspci 00:00.0 Host bridge: Intel Corporation 440GX - 82443GX Host bridge (AGP disable d) 00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) 00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) 00:10.0 Class ff00: Unknown device 15bc:2530 00:10.1 Class ff00: Unknown device 15bc:2530 00:10.2 Class ff00: Unknown device 15bc:2530 00:11.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08 )00:12.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 0 8) 00:13.0 VGA compatible controller: Chips and Technologies F69000 HiQVideo (rev 64) 00:14.0 PCI bridge: Hint Corp: Unknown device 0022 (rev 02) These blades have a "hotswap" capability that requires an additional driver, which is available under the GPL. It [...] will soon be called "cpcieject" and be available as a module. (Cf: [1481]http://packages.debian.org/unstable/admin/cpcieject.html) _________________________________________________________________ 3.2.6. UPS Hp doesn't make UPS anymore, but has a world-wide agreement with APC. APC distributes a free software (no cost, not open-source), to manage its UPS under Linux. It's available at [1482]http://www.apcc.com/products/management/pcp_linux.cfm. A dedicated page for APC UPS configuration with HP machines is available at [1483]http://hp.apcc.com. _________________________________________________________________ 3.2.7. X Terminals HP proposes now NCD X terminals to replace the Envizex/Entria range. The HP X terminal range (Entria, Envizex) is usable with a Linux server. More over, a Linux server may be a boot server for X terminals. To do it, a certain number of operations are mandatory. We suppose we have a HP-UX machine named hpux, on which is installed Enware, a Linux server, named linux and an X Terminal with MAC address 08:00:09:db:8d:1c. The gateway on the network is at IP address 192.168.1.254, and the DNS name server at 192.168.1.1. Commands to do are : Enware Home Directory hpux #cd /opt/hpxt/enware/xthome Creation of a tar archive of this software hpux #tar cvf ~ftp/en.tar * .??* Download of the tar archive linux #ftp hpux Connected to hpux. 220 hpux FTP server (Version wu-2.5.0(1) Wed Aug 25 12:50:08 EDT 1999) ready. Name (ftp:Root):ftp 331 Password required for ftp. Password:(type your mail address here) 230- [...] 230- 230 User ftp logged in. Access restrictions apply. ftp>lcd /tmp Local directory now /tmp ftp>get en.tar 200 PORT command successful. 150 Opening BINARY mode data connection for en.tar (57638340 bytes). 226 Transfer complete. 57638340 bytes received in [...] ftp>quit [...] Creation of the target directory on the linux machine linux #mkdir -p /tftpboot Go there linux #cd /tftpboot untar the archive linux #tar xvf /tmp/en.tar Launch the X Font Server working on port 7100 linux #/usr/X11R6/bin/xfs -port 7100 Creation of the bootpd configuration file linux #cat >> /etc/bootptab << EOF global.prof::sm=255.255.255.0::ds=192.168.1.1::gw=192.168.1.254::ht=ethernet::b f=bin/C3253A: # Adjust to your X-terminal tx1:hd=/tftpboot:tc=global.prof:ha=080009db8d1c:ip=192.168.1.100: EOF Install bootpd say from [1484]http://rpmfind.net linux #rpm -Uvh bootp-2.4.3-7.i386.rpm Verify the existence of such a line in /etc/inetd.conf, and restart if needed the server by killall -1 inetd linux #grep bootps /etc/inetd.conf bootps dgram udp wait root /usr/sbin/tcpd bootpd Now enkoy your X terminal by booting it For a more detailed description, as well as the software related to that operation, consult also the page [1485]http://www.cb3rob.net/~sven/xterm. _________________________________________________________________ 3.2.8. The printing product range 3.2.8.1. General points Printers may be connected directly to a machine through either a parallel port (generally), or a serial port, or even (more recently) through a USB port. They may also be directly wired to the network, for a global access; this is done thanks to a card put in a slot of the printer, or through the connexion of the parallel port of the printer to a sharing network box. HP provides such boxes, called JetDirect, which allow thus to share personnal printers on the network, directly, without going through a machine. They exist for various network topologies (10 BT, 10/100 BT, Localtalk, 10B2) and offer the ability to access to the printer directly from machine which like Linux support the LPD protocol, by using a remote printer in the /etc/printcap file. The name of the queue to use is then raw. An example of /etc/printcap file allowing to access to a printer, equiped with such a box or card, named lj4000 on the network is given below : # REMOTE POSTSCRIPT 1200x1200 a4 {} PostScript Default {} lj4000::sd=/var/spool/lpd/lj4000::rm=lj4000::rp=raw::if=/var/spool/lpd/lj4000/f ilter::mx#0::sh: The configuration access to the box is done either through the WebJetAdmin tool provided also under Linux now, or by the telnet command. The default address of these products is 192.0.0.192. To connect to them initially, you just have to add an IP alias on your network interface, typically by : #ifconfig eth0:0 192.0.0.1 and a route to that network (if not automatically created) typically by : #route add -net 192.0.0.0 The access to the equipment is thus done simply by : #telnet 192.0.0.192 Please pay attention to have only one such equipment on the network, at the same time, or you'll have duplicate IP addresses, which always causes problems. Note that HP manageable network equipments also use the same default address. The reading of the [1486]IP Alias mini HOWTO may be useful if you don't understand the previous paragraph :-). It is of course possible to access through the network to an HP printer attached and declared directly on a Linux machine, thanks to the lpd service for the other Unix clients, through [1487]SaMBa for the clients of Microsoft systems (Win9x ou WinNTx) or through [1488]NetAtalk for the MacIntosh clients. At last, [1489]SaMBa offers a tool, smbclient, which allows to print from a Unix/Linux machine to a printer wired directly on a Microsoft based PC, without any need to use a JetDirect system. All the details useful to realize this operation are described in the example file of smbprint provided with the [1490]SaMBa package and on the page [1491]http://www.medasys-digital-systems.fr/linux/samba-truc.html. Communication between a Linux machine and a printer needs also, outside a network dialog, a discussion with an exchange language between the two elements. There are a lot of languages of that sort, such as PCL, Postscript or HPGL. To be able to print correctly, the tool providing the datas to print has to generate code known by the printer. Filters exist which allow to easily transform an output in one given format to another one. Thus the [1492]Ghostscript software authorizes the transformation of Postscript source in a great variety of output formats, as indicated by its invocation in the 'Available devices' part : #gs -h GNU Ghostscript 6.51 (2001-03-28) Copyright (C) 2001 artofcode LLC, Benicia, CA. All rights reserved. Usage: gs [switches] [file1.ps file2.ps ...] Most frequently used switches: (you can use # in place of =) -dNOPAUSE no pause after page | -q `quiet', fewer messages -gx page size in pixels | -r pixels/inch resolution -sDEVICE= select device | -dBATCH exit after last file -sOutputFile= select output file: - for stdout, |command for pipe, embed %d or %ld for page # Input formats: PostScript PostScriptLevel1 PostScriptLevel2 PDF Available devices: x11 bbox x11alpha x11cmyk x11gray2 x11gray4 x11mono bmpmono bmpgray bmpsep1 bmpsep8 bmp16 bmp256 bmp16m bmp32b deskjet djet500 laserjet ljetplus ljet2p ljet3 ljet3d ljet4 ljet4d lj5mono lj5gray cdeskjet cdjcolor cdjmono cdj550 pj pjxl pjxl300 uniprint omni bj10e bj200 bjc600 bjc800 faxg3 faxg32d faxg4 pcxmono pcxgray pcx16 pcx256 pcx24b pcxcmyk pbm pbmraw pgm pgmraw pgnm pgnmraw pnm pnmraw ppm ppmraw pkm pkmraw pksm pksmraw tiffcrle tiffg3 tiffg32d tiffg4 tifflzw tiffpack tiff12nc tiff24nc psmono psgray psrgb bit bitrgb bitcmyk pngmono pnggray png16 png256 png16m jpeg jpeggray pdfwrite pswrite epswrite pxlmono pxlcolor dmprt cdj880 ap3250 appledmp atx23 atx24 atx38 bmpa16 bmpa16m bmpa256 bmpa32b bmpamono bmpasep1 bmpasep8 ccr cdj1600 cdj500 cdj670 cdj850 cdj890 cdj970 cfax cgm24 cgm8 cgmmono cljet5pr coslw2p coslwxl cp50 declj250 dfaxlow dfaxhigh djet500c dl2100 dnj650c eps9high eps9mid epson epsonc escp fs600 hl1250 hl7x0 ibmpro imagen inferno iwhi iwlo iwlq jetp3852 la50 la70 la75 la75plus lbp8 lj250 lj3100sw lj4dith ln03 lp2563 lp8000 lq850 lxm5700m m8510 mgr4 mgr8 mgrgray2 mgrgray4 mgrgray8 mgrmono miff24 necp6 oce9050 oki182 okiibm paintjet photoex pjetxl plan9bm sgirgb r4081 sj48 st800 stcolor sunhmono t4693d2 t4693d4 t4693d8 tek4696 xes x11cmyk2 x11cmyk4 x11cmyk8 x11rg16x x11rg32x ljet4pjl lj4dithp dj505j picty180 pr201 pr150 pr1000 pr1000_4 jj100 bj10v bj10vh mag16 mag256 mj700v2c mj500c mj6000c mj8000c fmpr fmlbp ml600 lbp310 lbp320 lips2p bjc880j lips4 lips4v escpage lp2000 npdl md50Mono md50Eco md1xMono hpijs DJ630 DJ6xx DJ6xxP DJ8xx DJ9xx DJ9xxVIP AP21xx hpdj md2k md5k stp lxm3200 lx5000 lex7000 lex5700 lex3200 lex2050 gdi epl5800 epl2050 epl2050p alc8500 alc2000 cljet5 cljet5c nullpage Search path: . : /usr/share/ghostscript/6.51/lib : /usr/share/ghostscript/6.51/vflib : /usr/share/ghostscript/fonts : /usr/share/fonts/default/ghostscript : /usr/share/fonts/default/Type1 : /usr/share/fonts/default/amspsfnt/pfb : /usr/share/fonts/default/cmpsfont/pfb For more information, see /usr/share/doc/ghostscript-6.51/Use.htm. Report bugs to bug-gs@ghostscript.com, using the form in Bug-form.htm. This represents only the output formats compiled in the program. Other are also available. You may find a complete list of all the printers known by this software at [1493]http://www.cs.wisc.edu/~ghost/printer.html. A ghostscript driver for supporting pcl3 is also available at [1494]http://home.t-online.de/home/Martin.Lottermoser/pcl3.html. A software allowing the conversion of HP-GL format in a various set of other graphical formats is available n the GNU project at: [1495]http://www.gnu.org/software/hp2xx/ (hp2xx). A list of HP printers supported may be found on the following pages : [1496]http://www.linuxprinting.org/printer_list.cgi?make=HP and [1497]http://hp.sourceforge.net/. HP has published in April 2001 improved drivers to support inkjet printers. Cf: [1498]http://hpinkjet.sourceforge.net/. HP also has a printing resources Web page available at [1499]http://www.hp.com/united-states/linux/products/printing_imaging/ printing_resources.html Ram Rao reports that if you have the PPD file (textual) for the printer in the Windows driver kit, it is then easy to make this printer usable under Linux/CUPS. Compress that file with gzip. Put the result in /usr/share/model/footmatic/HP. And restart the cups daemon. Then when you install the new printer via CUPS, it will show up in the options list. _________________________________________________________________ 3.2.8.2. Control codes Ink or laser printers may be controled through control codes. The following table gives some of them : Table 3-24. Printer Control codes Code Function ESC&l1H Tray 2 ESC&l2H Manual tray, sheet ESC&l3H Manual tray, envelope ESC&l4H Tray 1 ESC&l5H Tray 3 ESC&l7H Automatic selection ESC&l0O Portrait ESC&l1O Landscape ESC&l5A A4 ESC(8U HP Roman 8 ESC(10U IBM PC-8 (CP437) ESC(12U IBM PC-850 (CP850) Other control codes for PCL3 language are given on HP's Web site for [1500]deskjet and [1501]laserjet. HP printers are of two kind of technologies : inkjet or laserjet which are detailed below. _________________________________________________________________ 3.2.8.2.1. Inkjet printers range (DeskJet) Inkjet HP printers use either an own language for page description, or the PPA protocol, or also the Postscript or PCL language. The range and their links with Linux are documented at [1502]http://www.hp.com/united-states/linux/products/printing_imaging/deskje t_printers.html The reference site for InkJet printer is [1503]http://hpinkjet.sourceforge.net For PPA printers, consult also [1504]http://sourceforge.net/projects/pnm2ppa Note that most inkjet printers are limited to a 600x600 resolution when used from Unix/Linux. _________________________________________________________________ 3.2.8.2.2. The InkJet range LaserJet HP printers use PCL or Postscript page description language. The range and their links with Linux are documented at [1505]http://www.hp.com/united-states/linux/products/printing_imaging/laserj et_printers.html The reference site for LaserJet printer is [1506]http://hp.sourceforge.net _________________________________________________________________ 3.2.9. Digital imaging product range 3.2.9.1. The scanners range (ScanJet) The main tool available in Linux environment to manage scanners is [1507]SANE (Scanner Access Now Easy). This software provides in particular a driver for HP scanner management: [1508]hpbackend. The following table provides all information on the support for this hardware by Linux. Table 3-25. Scanners and Linux Reference Scanner Interface Linux support Tested C9195A ScanJet Plus HP Parallel Interface Card [1509]SANE and [1510]driver No C1750A ScanJet IIc SCSI [1511]SANE Yes C2500A, C2507A, C2508A, C2509A ScanJet IICX SCSI [1512]SANE Yes C1790A, C1797A, C1798A, C1799A ScanJet IIP SCSI [1513]SANE Yes C2520A, C2527A, C2528A, C2529A ScanJet 3C SCSI [1514]SANE Yes C2570A ScanJet 3P SCSI [1515]SANE Yes C2520B, C2527B, C2527D, C2528B, C2529B ScanJet 4C SCSI [1516]SANE Yes C1130B ScanJet 4P SCSI [1517]SANE Yes C5110A, C5116A, C5117A, C5119A ScanJet 5P SCSI [1518]SANE Yes C5160A, C5167A ScanJet 5S ??? ??? No ScanJet 2100C USB [1519]SANE and [1520]driver USB ([1521]driver plustek) Yes C8500A ScanJet [1522]2200C USB [1523]SANE and [1524]driver USB ([1525]driver plustek) Yes Q2957A ScanJet 2300C [1526]driver USB ??? No C7167A ScanJet 3200C [1527]Parallel Port [1528]SANE and [1529]umax1220p Yes C7680A ScanJet [1530]3300C USB [1531]SANE and [1532]driver USB [1533]hp3300 Yes C7727A ScanJet [1534]3400C [1535]Parallel Port or USB [1536]SANE and [1537]driver PPSCSI or [1538]driver USB [1539]hp3300 No Q2707A, Q2807A, Q2907A ScanJet 3500C, 3530C, 3570C USB ??? No C6290A, C6292A, C6293A, C7297A ScanJet [1540]4100C, Cse, Cxi USB [1541]SANE and [1542]driver USB Yes C7177A ScanJet [1543]4200C USB [1544]SANE and [1545]driver USB No C7737A ScanJet [1546]4300C [1547]Parallel Port or USB [1548]SANE and [1549]driver PPSCSI or [1550]driver USB [1551]hp3300 No C9877A, C9887A ScanJet 4400C, [1552]4470C USB ??? No C9917A, C9927A ScanJet 4500C, 4570C USB ??? No C5190A, C5192A, C5193A, C5197A ScanJet 5100C, Cse, Cxi [1553]Parallel Port [1554]SANE and [1555]driver PPSCSI Yes C5190A, C7192A, C7193A ScanJet [1556]5200C [1557]Parallel Port or USB [1558]SANE and [1559]driver PPSCSI or [1560]driver USB Yes C7697A, C8477A ScanJet [1561]5300C, 5370C [1562]Parallel Port or USB [1563]SANE and [1564]driver PPSCSI or [1565]driver USB (driver hp5300) No C8517A, C9857A, C9867A ScanJet 5400C, [1566]5470C USB ??? No C9919A, C9929A ScanJet 5500C, 5570C USB ??? No C6260A, C6266A, C6267A, C6269A ScanJet 6100C SCSI [1567]SANE Yes C6270A, C6272A, C6273A, C6274A, C6275A, C7277A, C6278A ScanJet [1568]6200C, Cse, Cxi, 6250C SCSI or USB [1569]SANE or [1570]driver USB Yes C7677A, C7678A, C7679A ScanJet [1571]6300C, Cse, Cxi, 6350C, 6390C SCSI or USB [1572]SANE or [1573]driver USB Yes C7717A, C7718A, C7719A ScanJet [1574]7400C, 7450C, 7490C SCSI or USB [1575]Vue Scan Yes C5100A PhotoSmart PhotoScanner SCSI [1576]SANE Yes A FAQ dedicated to HP scanners support under Linux with [1577]SANE is available at the address : [1578]http://www.kirchgessner.net/sanehpfaq.html One usefull adress for parallel scanners should be consulted : [1579]http://www.buzzard.org.uk/jonathan/scanners.html Some usefull adresses for USB scanners should be consulted : [1580]http://www.buzzard.org.uk/jonathan/scanners-usb.html and [1581]http://www.qbik.ch/usb/devices/search_res.php3?pattern=hp _________________________________________________________________ 3.2.9.2. Digital photo cameras To use these peripherals, you have to compile SCSI support with your kernel, and turn on mass storage device in USB support. Then mount the /dev/sdxx device as usual. The following table provides all information on the support for this hardware by Linux. Table 3-26. Cameras and Linux Reference Camera Interface Linux support Tested [1582]PhotoSmart 120 [1583]driver USB usb-storage Yes C8890A PhotoSmart 215 [1584]driver USB ??? No C8452A [1585]PhotoSmart 315 [1586]driver USB usb-storage Yes C8900A [1587]PhotoSmart 318 [1588]driver USB [1589]gPhoto2 Yes Q2180A [1590]PhotoSmart 320 [1591]driver USB usb-storage Yes C8908A PhotoSmart 612 [1592]driver USB [1593]gPhoto2 No C6324A PhotoSmart 618 [1594]driver USB [1595]gPhoto2 and usb-storage Yes Q2170A PhotoSmart 620 [1596]driver USB ??? No C8913A [1597]PhotoSmart 715 [1598]driver USB [1599]gPhoto2 and kernel Yes Q2164A [1600]PhotoSmart 720 [1601]driver USB usb-storage Yes Q2146A PhotoSmart 812 [1602]driver USB ??? No Q2190A PhotoSmart 850 [1603]driver USB ??? No C6326A [1604]http://www.qbik.ch/usb/devices/showdev.php?id=672PhotoSmart 912 [1605]driver USB usb-storage and [1606]gPhoto2 (digita) Yes C5101A PhotoSmart S20 [1607]driver USB ??? No _________________________________________________________________ 3.2.9.3. The Digital Sender This product is a scanner, able to send the result of the digitalisation through e-mail, by sending the digitalised document as an attachement in PDF format. It may so well be used with a Linux (or other) mail server (sendmail, postfix, ...), as well as with clients reading their messages under Linux, providing they have a tool to display PDF file such as [1608]Acrobat Reader or [1609]xpdf. The Digital Sender can also send images as black and white or colour TIFF files. The black and white images work fine, however, there is a problem with the coloured TIFF files. These are sent in an obsolete format which is not supported by [1610]libtiff, which is the basis of support for the TIFF format for nearly all Linux software. This means that you cannot directly open colour TIFF images created by the Digital Sender using Linux software (e.g. The GIMP, ImageMagick). _________________________________________________________________ 3.2.9.4. The CapShare THere is an application for the Window Maker window manager to manage the CapShare. More information at [1611]http://www.netjunki.org/projects/index.php _________________________________________________________________ 3.2.10. All-in-one range (OfficeJet) These products gather many functions : printing (all), scanning (all), copying (all), and faxing (some). More information from their dedicated web site : [1612]http://hpoj.sourceforge.net/suplist.shtml _________________________________________________________________ 3.2.11. The Storage products range 3.2.11.1. Tape based products Most HP SCSI tape drives (DAT 1, 2, 3, 4, DLT, LTO) work with Linux. the driver file to use is /dev/st0 for the first drive, /dev/st1, for the second... More information may be found on the certification site [1613]http://www.linuxtapecert.org/ HP provides the tapeware software with its drives, including a Linux version. Colorado Trakker 250 and 350 are supported with [1614]ftape (>= 4.02) T1000 should also work correctly. Colorado 5GB are supported with the [1615]paride driver. _________________________________________________________________ 3.2.11.1.1. HP libraries Tools to manage such drives may be found on [1616]http://mtx.sourceforge.net/ or [1617]http://www.arkeia.com/ or [1618]http://www.strusel007.de/linux/changer.html. I had the chance to test models 6x24, 418, 718, 818 with arkeia without problem. _________________________________________________________________ 3.2.11.2. HP SureStore Virtual Array These systems are supported in a mixed environment Windows NT/2K, HP-UX 11.0 and Linux. They are connected through Fibre Channel controlers to the SAN. Among all FC cards supported on Linux, HP supoprts those provided by [1619]Emulex and [1620]QLogic. HP sells a Linux version of the management software for these arrays. Supported models are VA7100 (A6183A), VA7400. HP provides information on Command View usage with RedHat 6.2 and 7.1 respectively at the following addresses : [1621]http://www.hp.com/cposupport/information_storage/support_doc/lpg64111. html and [1622]http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.j sp?locale=en_US&prodNum=&seriesId=&lang=English+%28American%29&basePartNum=C OL1202&locBasepartNum=co-7366-1-5&prodName=Configuring+the+HP+VA7xxx+with+Co mmand+View+SDM+for+Linux+Red+Hat+7.1&os=&tech=Software+-+Patch _________________________________________________________________ 3.2.11.3. HP XP Storage Systems Here are the configurations supported by HP for these Storage Systems: Redhat 6.0/6.1 Qlogic QLA2100F or QLA2200F with driver V2.23 Private Loop or Direct Fibre Attach No boot support XP256 has to have firmware >= 44.14.00 Mode 00 For direct attach XP512/48 has to have firmware >= 11.22.00 Mode 00 For attachment to a switch XP512/48 has to have firmware >= 12.19.00 Redhat 6.2 Emulex LP8000 with driver V4.10g Private Loop or Direct Fibre Attach No boot support For attachment to a switch use Brocade 2400/2800 with firmware >= V2.1.9f) XP512/48 has to have firmware >= 12.19.00 Mode 00 Khalid Aziz reports that there may be a problem with XP512 support of Linux due to a hole in LUN numbers. If the LUNs were numbered continuously, you would see all LUNs. Some folks in HP have written patches for this. Essentially all that is needed is to add an entry in device_list[] in scsi_scan.c for the XP512 and set the flag BLIST_SPARSELUN. The entry would look something like: { "HP", "XP512", "*", BLIST_SPARSELUN} The first field is the vendor name as reported by XP512 and second field is the model name as reported by XP512. These two need to match what XP512 returns in Inquiry command, exactly. _________________________________________________________________ 3.3. HP software and free software This section presents rapidly some HP applications which can be used under Linux. These are either commercial applications or freeware applications. It proposes also links to free software available for other operating systems (HP-UX, MPE/IX). HP proposes a Web page concerning all HP sponsored free software developments at [1623]http://opensource.hp.com/opensource_projects.html The Gelato federation proposes a Web page concerning all the developments realized by its memebers around Linux/ia64 at [1624]http://www.gelato.org/software/index.php _________________________________________________________________ 3.3.1. HP softwares under Linux FireHunter This commercial software targetted to the ISP manages services levels and is available for RedHat version 5.2 distributions. [1625]http://www.firehunter.com. HP Eloquence This commercial software is an IDE for management applications for small business firms and is available under Linux since 1997. A lot of distributions are supported by a third party firm to which HP has given the support. Complementary information exist on the site [1626]http://www.hp-eloquence.com. HP WebJetAdmin This freeware allows to manage HP network printers through the installation of a service on a Linux server, and is accessible from any browser running on any client machine. HP has announced the availability of this product the fisrt time in 5.1 version in February 1999. Then were released version 5.6 in December 1999, 6.0 version in June 2000, 6.1 version in August 2000, 6.5 version in October 2001. You may download the latest version at [1627]ftp://ftp.hp.com/pub/networking/software/hpwebjet_linux.s elfx. All information on this product are available from the addresses : [1628]http://www.hp.com/go/webjetadmin and [1629]http://www.hp.com/pond/wja/live/manual/html/wjacomp_linux .html. The 5.6 version in RPM format is also available at [1630]http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/hpweb jet-5.6-1.i386.rpm. HP WebQoS This commercial software allows to manage Internet Quality of Service by stabilizing performances during high loads, by optimizing used resources, and by managing priorities at applications and users levels. HP has announced the availability of this product during summer 1999. Complementary information exist on the site [1631]http://www.hp.com/go/webqos. HP OpenView This commercial software is a complete network management platform. An NNM (Network Node Manager) has been announced, as well as ITO. NNM and ITO agents are currently available for Linux. An Omniback client is available for Redhat 5.2 distributions (Cf [1632]http://www.hp.com/storage/event/openview_hl.html). Precision from F. Lorrain: The Omniback II (A.03.50) client run without problem under debian potato (2.2r3) and Mandrake 7.2. But on debian, you need the libnns1-compat. HP OpenMail A version of this commercial mail and work group management tool is available since the first of september, 1999 under Linux. [1633]Till November the 13th, 2001, the software has been taken over by Samsung SDS. Informations concerning it are available on the page : [1634]http://www.openmail.com. HP E-Speak E-Speak, the open software platform for creating, composing, mediating, managing, and accessing Internet-based e-services. E-speak allows a resource (computing device, application, or data content) to be virtualized and re-deployed as an Internet-based e-service. All information concerning it are available on the page : [1635]http://www.e-speak.hp.com/. HP MC Service Guard This commercial software allows to manage a high availability cluster of applications. HP has announced the availability of this product for the 15th of November 2001. Complementary information exist on the site [1636]http://www.unixsolutions.hp.com/products/ha/prod/ar/mcsg. html. Reference : T1521A. Plug-in Scheduler policies for Linux This patch enables you to write and use loadable kernel modules to change your Linux machine's scheduler policies without rebooting. It's available at [1637]http://resourcemanagement.unixsolutions.hp.com/WaRM/sched policy.html. PRM for Linux This commercial tool allows you to monitor CPU ressources on your machine by partitioning it. [1638]http://resourcemanagement.unixsolutions.hp.com/WaRM/prm_l inux/index.html. HP TopTools Agent for Linux This freeware is a DMI agent increasing the ease of management of HP Machines under Linux. Downlaodable from [1639]http://hp-linux.org/toptools and [1640]http://www.hp.com/toptools/download/server_agents.html. dummynet This free software is FTP server perf measurement tool. Downloadable at [1641]ftp://ftp.cup.hp.com/dist/networking/tools/dummynet/. netperf This free software is a perf measurement tool for benchmarks. Downlaodable from [1642]ftp://ftp.cup.hp.com/dist/networking/benchmarks/netperf. hp-lx (aka Trusted Linux aka Secure Linux) (T1401AA) This commercial software is a modified version of a RedHat distribution, containing kernel patches and daemons (GPL), as well as a set of management commands (commercial) allowing you to create jail compartments to execute applications, running so in an absolute secure environment. The software also controls file access, inter-process and network communications, ... More information on [1643]http://www.hp.com/security/products/linux/. Chai Server This free software is an embedded Web-based application server. More information on [1644]https://devnet.hp.com/projects/csopen/. Jupiter/Kelvin Kelvin is an application programming interface (API) project dedicated for the interactive visualization of large geometric models. [1645]http://www.gris.uni-tuebingen.de/~bartz/kelvin/. Service Control Manager This commercial software is a secure single-point of adminstration for both Linux and HP-UX multi-system environments. [1646]http://www.hp.com/products1/linux/software/scm.html. HP AS (Bluestone) This commercial software is a service-oriented application server. Ref: [1647]http://www.bluestone.com. HP OpenCall SS7 SDK This commercial software is the developer's kit for the HP Opencall SS7 signaling platform. Ref: [1648]http://www.hp.com/communications/opencall/products/ss7/in dex.html. Single Server Image This free software allows to create unified cluster under Linux (a la OpenVMS). Ref: [1649]http://ssic-linux.sourceforge.net/. Cooltown This initiative has a lot of developments under Linux. Ref: [1650]http://cooltown.hp.com/cooltownhome/index.asp and [1651]http://cooltown.hp.com/dev/reference/coolbase/baseboard/R efPlatform.asp. prospect This free software is a PC sampling flat profiler that uses the GPL module oprofile as the sampling mechanism Ref: [1652]http://sourceforge.net/projects/prospect. _________________________________________________________________ 3.3.2. Third party softwares linked to HP for Linux GNUPro HP and [1653]Cygnus Solutions have announced the 8th of March, 1999 a partnership to provide the GNUPro tools on all the HP machines, including Linux. Arkeia [1654]Arkeia is a network backup solution supporting perfectly all HP storage peripherals (autoloader, libraries, ...) _________________________________________________________________ 3.3.3. Free softwares under HP-UX Numerous free software for HP-UX are available at [1655]http://hpux.cs.utah.edu/. HP hosts also a certain number of free software tools for HP-UX at [1656]http://h21007.www2.hp.com/dspp/tech/tech_TechTypeListingPage_IDX/1,170 4,10312,00.html Hp proposes also tools to help porting Linux applications to HP-UX. Cf: [1657]http://devresource.hp.com/LPK/ and [1658]http://devresource.hp.com/STKL/index.html. An open source version of hpterm may be found on [1659]http://sourceforge.net/projects/hpterm/. [1660]KDE 2.1 s also available for HP-UX. As well as [1661]Gnome _________________________________________________________________ 3.3.4. Free softwares under MPE/IX Numerous free software for MPE/IX are available at [1662]http://jazz.external.hp.com/src An HP700/92 terminal emulator is available at [1663]http://www.aics-research.com/qcterm/ _________________________________________________________________ 3.4. Support of HP solutions under Linux HP proposes since May 1999 a [1664]worldwide support offer on Linux. This offer includes up to the possibility to answer 24x7, in a delay of 2 hours after taking the call. The reference of this product is : HP LNXIA32A HP proposes since 2001 a "Mission Critical support" contract for his Linux customers. HP has also online ressources to help people using Linux with its products : Online Linux incidents [1665]http://hp3.m0.net/m/s.asp?H1409133998X725229 Linux training courses [1666]http://hp3.m0.net/m/s.asp?H1409133998X725230 Linux discussion Forum [1667]http://hp3.m0.net/m/s.asp?H1409133998X725231 Third party firms also propose Linux and free software support on HP platforms : [1668]Medasys Contact : Sylvain Bergé <[1669]Sylvain.Berge_at_medasys.fr> [1670]Atrid Contact : Bruno Deschandelliers <[1671]B.Deschandelliers_at_atrid.fr> [1672]Alcove Contact : Lucien Petit <[1673]Lucien.Petit_at_alcove.fr> [1674]Andago Contact : <[1675]info_at_andago.com> _________________________________________________________________ 3.5. Training on HP Linux solutions HP proposes since June 1999 a worldwide training offer on Linux. It's detailed on the page [1676]http://education.hp.com/curr-linux.htm. The detail of all the training courses for France is available at : [1677]http://www.france.hp.com/formation/f_linux_00.html. _________________________________________________________________ 3.6. HP as an Open Source Software user and contributor HP doesn't make a lot of noise in the free software world, even if it is an actor and also a user for its own IT infrastructure. For example, all the incoming mail in HP goes through [1678]PostFix servers #dig hp.com -t mx | grep MX ;; hp.com, type = MX, class = IN hp.com. 21m28s IN MX 50 cossmtp.hp.com. hp.com. 21m28s IN MX 50 palsmtp.hp.com. hp.com. 21m28s IN MX 20 postal.agilent.com. hp.com. 21m28s IN MX 10 envelope.hp.com. hp.com. 21m28s IN MX 10 letter.hp.com. hp.com. 21m28s IN MX 20 stamp.agilent.com. hp.com. 21m28s IN MX 30 cossmtpx.hp.com. hp.com. 21m28s IN MX 50 atlsmtp.hp.com. #telnet envelope.hp.com 25 Trying 192.151.10.4... Connected to envelope.hp.com. Escape character is '^]'. 220 envelope.hp.com ESMTP Postfix QUIT 221 Bye Connection closed by foreign host. #telnet letter.hp.com 25 Trying 192.151.10.3... Connected to letter.hp.com. Escape character is '^]'. 220 letter.hp.com ESMTP Postfix QUIT 221 Bye Connection closed by foreign host. #telnet postal.agilent.com 25 Trying 192.6.9.3... Connected to postal.agilent.com. Escape character is '^]'. 220 postal.agilent.com ESMTP Postfix QUIT 221 Bye Connection closed by foreign host. Identically, for its institutional Web server, HP uses [1679]Apache as more than 15 millions of other sites. #wget -S http://www.hp.com/ --15:09:45-- http://www.hp.com:80/ => `index.html.1' Connecting to www.hp.com:80... connected! HTTP request sent, awaiting response... 200 OK 2 Date: Fri, 05 May 2000 13:12:25 GMT 3 Server: Apache/1.3.9 (Unix) mod_fastcgi/2.2.2 [...] [1680]Agilent (old-HP branch) uses also the free software [1681]Perl for CAD as related at [1682]http://perl.oreilly.com/news/agilent_0300.html HP also worked on the improvement of the proxy-cache [1683]Squid , as related at [1684]http://www.hpl.hp.com/techreports/1999/HPL-1999-142.html In another domain, HP produces also documents to help convincing to the use of Open Soure Software, as this HP Labs report available on [1685]http://lib.hpl.hp.com/techpubs/2001/HPL-2001-233.html A lot of HP people work on open source projects. They deserve a particular notice because, as in every open source project, their tenacious and constant comportment make these projects alive. Among them: David Mosberger and Stéphane Eranian Port of the Linux kernel on IA-64 [1686]http://www.linuxia64.org/. Grant Grundler, John S. Marvin and Paul Bame Major contributor of the Linux kernel port on Pa-Risc [1687]http://www.parisc-linux.org/. Jean Tourrilhes Wireless Tools for Linux [1688]http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tool s.html. John H. Oleinik and David Suffield Projet HP imprimante jet d'encre [1689]http://hpinkjet.sourceforge.net/. Dann Frazier System Imager [1690]http://www.systemimager.org. Peter Mellquist SNMP++ [1691]http://rosegarden.external.hp.com/snmp++. _________________________________________________________________ Chapter 4. Solutions and Sizing This chapter proposes an help for sizing NetServers under Linux, depending on the different kind of use. You have to consider that exercise as a bit perilous. Indeed, only the reality allows to test such previsions. Nevertheless, using the experience acquired by deploying solutions in the past, we can give some useful rules. We may apply a certain number of rules valid for the sizing of classical Unix servers, considering that CISC systems (the majority in Linux environment) need 2.5 less times resources in memory than RISC systems, due to the fact that binaries used are smaller (Intel platforms are for the moment 32 bits architectures). This has also influences on disk and swap space. It's obvious you have to consider, whatever the system, bottlenecks of the solution put in place, because they will determine the weakest link in the chain. You have to look particularly at the following points : * The number and the speed of disks (the I/O rate of 10.000 rpm disks may go up to 20 MB/s, and 25 for 15.000 rpm disks), * The number and the speed of SCSI controlers (the I/O rate of Ultra2 LVD of the LC2000 - LH3/4/3000/6000 may go up to 80 MB/s, and latest B model up to 160 MB/s), * The addition of a supplementary SCSI card supported, when adding slow peripherals (DAT, DLT, CD writer ...) in order to avoid that the controler slow down in compatible mode, and that I/O performances drop significantly. You have also to be suspicious of the extensible functions of machines. Indeed, it's often better for a customer to add a new server, rather than to increase the capacities of the one in place. The first reason is a financial one, on one side, because the costs of add-ons on an already old system may be near those of a new system, whose prices are becoming cheaper and cheaper. And the same for maintenance. On the other hand, technically, it could be more interesting to benefit from the latest technologies to obtain a machine more equilibrate, powerful and to reuse the old one for secondary tasks (secondary DNS, ...) or to split processes from the other one. For example, when Ultra2 LVD was introduced, it was more interesting to buy a new server to benefit from the 80 MB/s SCSI bus speed, rather than to update a server which had 40 MB/s Ultra Wide SCSI. This implies that it's interesting to size correctly the server, from the begining, for the whole forseeable period of life of its use (typically 3 years nowadays). In the same kind of ideas, you have to examine closely the choice between a bi-processors and two mono-processors machines. 2 different systems imply 2 disk controlers, 2 disks set, 2 separate RAM busses thus better performances, but more administration. On the other hand, a unique system renders it easier, allows for a quicker communication between processors, which could be necessary for certain applications, but makes the environment more fragile (more downtime in case of an hardware problem). In fact, there are more losses intrinsically on a multi-processor model, in communications at the system level. This question should mainly be considered for the addition of a processor (necesseraly obsolete) on a machine a posteriori, rather than to add a new server. On memory aspects, Linux can manage today up to 64 GB in stable kernels. Linux takes the maximum from the memory you give to it, mainly by the constitution of a cache disk which improves greatly system performances. You may thus oversize the quantity of RAM installed, because it's preferable to a situation where the server would be forced to swap (which drop performances dramatically). The minimum RAM size provided on the NetServers (128 ou 256 MB) matches perfectly a normal use of a system, and doesn't need any particular addition. You have to take in account that there is no graphical environment used on production servers. Concerning the swap, under Linux, it comes in addition to the RAM to give the complete virtual memory available for the server. As a base rule, it's recommanded to give the same amount of swap space as the amount of RAM, to allow the system to put on disk nearly all the running processes in case of need. But the rule which exists for System V Unix (such as HP-UX) consisting of reserving twice the amount of RAM for swap isn't useful under Linux. You may note that Linux may swap certain inactive processes to free the maximum RAM possible. So having a system whose swap is partially used isn't necesseraly a proof of lack of memory, nor lack of performances. You'll find below recommandations depending of the type of use made by the HP NetServer under Linux. It's possible to cumulate several functions on the same server. You'll take care to add at least in that case the resources needed to give the services. Some generic rules have to be considered : * We consider that the number of simultaneous users is the same as half the whole number of users on the server. * The minimal RAM size needed for a usable Linux server is 32 MB, which is less than the minimum amount of RAM available on the NetServers (128 MB). In case you use X-Window with KDE or Gnome on this machine, you need to have 64 MB in supplement, thus 96 MB as a minimum. * The minimal disk size needed for a usable Linux server is 2 GB, which is less than the minimum amount of disk available on the NetServers (9 GB). * In case of use of Raid 1, you have to double the amount of disk space useful to obtain the disk space needed. In case of use of Raid 5, you need to add 1 disk to obtain the disk space needed (up to 8 disks). * Except in particular cases (computing server), the amount of swap is the same as the amount of RAM. * The minimal processor needed for a usable Linux server is a Pentium 133, which is less than the minimum processor available on the NetServers (Pentium III 933). * Each X-Window user excuting a client on the server uses in average 2 MB. * It may be useful to add network cards in this type of machine to smooth the traffic, depending on the number of clients. Using the bonding option provided by the Linux kernel may also be very useful. You may also consult the linux performance tuning document provided by [1692]Adrian Likins _________________________________________________________________ 4.1. Linux as file and print server 4.1.1. Linux as file server The sharing service uses 2 MB of RAM, and 2 more MB per share. In case of a unique share (users space for example), it leads to a 2 MB consumption per user. In the proposed case, we estimate that each user has 100 MB of disk space on the server, with an evolution to 200 MB 3 years later. Processor resources used are relativeley small, an entry level model will be sufficient from that point of view. We will priviledge the I/O speed with Ultra 3 LVD SCSI at 160 MB/s, if the budget allows it, and 15.000 RPM disks. Table 4-1. Sizing of a file server Simultaneous users RAM size Disk size Machine example 1 - 100 312 MB 27 GB E800 100 - 500 1 GB 117 GB LC2000 500 - 1000 2 GB 216 GB LH3000 _________________________________________________________________ 4.1.2. Linux as print server The sharing service uses 2 MB of RAM, and 2 more MB per printer shared. In case of a unique share (One printer per user typically), it leads to a 2 MB consumption per user. In the proposed case, we estimate that each user prints simultaneously files of 5 MB in average, thus we need to have that space available on the server. Processor resources used are relativeley small, an entry level model will be sufficient from that point of view. Table 4-2. Sizing of a print server Simultaneous users RAM size Disk size Machine example 1 - 100 312 MB 9 GB E800 100 - 500 1 GB 9 GB E800 500 - 1000 2 GB 9 GB LC2000 _________________________________________________________________ 4.2. Internet/Intranet Linux server 4.2.1. Web Server The Web service uses 2.5 MB of RAM, in static mode (simple HTML pages) and 5 MB of RAM in dynamic mode (HTML pages generated from perl, PHP, ...) per user. The disk space needed is function of the nature of the server, knowing that most of the consumption comes from images. Processor resources used are important, thus it could be useful to consider the increase in frequency and the addition of processors, because this type of traffic could be quite well done in parallel. With Apache 2.0 and the support of threads, it will become even more obvious. We will priviledge also the I/O speed with Ultra 2 LVD SCSI at 80 MB/s, if the budget allows it, and 10.000 RPM disks. Table 4-3. Sizing of a static Web server Simultaneous users RAM size Disk size Machine example 1 - 100 256 MB 9 GB E800 100 - 500 1 GB 9 GB LC2000 Bi-processor 500 - 1000 2 GB 9 GB LH6000 Quadri-processor Table 4-4. Sizing of a dynamic Web server Simultaneous users RAM size Disk size Machine example 1 - 100 512 MB 9 GB E800 100 - 500 2 GB 9 GB LC2000 Bi-processor 500 - 1000 4 GB 18 GB LH6000 Quadri-processor _________________________________________________________________ 4.2.2. Mail Server Generally, this machine is used as both SMTP (sending and reception of messages) and POP/IMAP server (keeper of messages and manager of client accesses). The SMTP Mail service uses 2 MB of RAM per user. The POP/IMAP Mail service uses 2 MB of RAM per user. The disk space needed becomes more and more important as long as attachments (images, various documents) take the greatest place in exchanges via e-mail. We consider in that case that an average mail box size is 50 MB. Processor resources used are important, thus it could be useful to consider the increase in frequency and the addition of processors, because this type of traffic could be quite well done in parallel. Table 4-5. Sizing of an e-mail server Simultaneous users RAM size Disk size Machine example 1 - 100 400 MB 9 GB E800 100 - 500 2 GB 27 GB LC2000 Bi-processor 500 - 1000 4 GB 54 GB LH6000 Quadri-processor _________________________________________________________________ 4.2.3. Firewall/Proxy/Web-Cache server Generally, this machine is both a Firewall server, a proxy (in both directions) and a cache for the Web because all requests go through it. The Firewall service uses 1 MB of RAM. The Proxy service uses 0.3 MB per incoming relay. The Web cache service uses 0.5 MB per user. The disk space needed is function of the parameters of the cache Web server. In that case, we consider 20 MB per user. Processor resources used are important, due to the analysis of IP packets. Thus it could be useful to consider the increase in frequency. Table 4-6. Sizing of a Firewall/Proxy/Web-Cache server Simultaneous users RAM size Disk size Machine example 1 - 100 128 MB 9 GB E800 100 - 500 512 MB 18 GB E800 500 - 1000 1 GB 27 GB E800 _________________________________________________________________ 4.2.4. Directory server Generally, this machine use a software like [1693]OpenLDAP to fulfill its goals. The LDAP service uses 1 MB of RAM and 10 kB of RAM per user. The disk space needed is of the same kind, so 10 kB per user. Processor resources used are moderated. Table 4-7. Sizing of a LDAP server Simultaneous users RAM size Disk size Machine example 1 - 100 64 MB 9 GB E800 100 - 500 64 MB 9 GB E800 500 - 1000 128 MB 9 GB E800 _________________________________________________________________ 4.3. Linux as computing server Generally, this machine is extremely stressed, mainly on the processor and RAM aspects. Sometimes this is combined with intensive I/O needs. We thus equip such a machine with high-end processors (nowadays Pentium III Xeon) with the greatest level 2 cache possible (nowadays 2 MB). In RAM, we would tend to reach the maximum possible, thus 4 GB. For this type of server, we should adapt the swap such as it covers all the needs in memory required by the computing codes to execute. There is often no specific constraint on network performances, except in case of a computing cluster, in which case we may consider to equip the machines with 100 Mb/s cards with a switch between them, even with Myrinet, Dolphin or Gigabit products. Typically, a LP1000 2*PIII 1.4GHz 1 GB/2*9GB is the target of this type of server. The choice is extremely variable depending on the nature of the computation to do. We should underline that there are processors, such as PA-Risc, much more performant in floating point computation than today Intel processors (up to 6 times). The new IA-64 Itanium family seems also to bring a better compromise for price/performances for that environment. This is by the way not the only approach as shown by the i-cluster project. Cf: [1694]http://www.hpl.hp.com/techreports/2001/HPL-2001-206.html _________________________________________________________________ 4.4. Linux as an office server This kind of server is for the moment rare in the free software world. It's more frequent in Microsoft world, by association with [1695]Metaframe solutions of [1696]Citrix. An office server needs 50 MB of RAM per user. Intrinsically, this machine has no requirements in term of disk, if it's not at the same time a file server. Processor resources used are important, thus it could be useful to consider the increase in frequency and the addition of processors, because this type of traffic could be quite well done in parallel. Free/Open Source Software Solutions for an office server can be done using [1697]OpenOffice.org, [1698]Linux Termnal Server Project or [1699]Plume. Table 4-8. Sizing of an office server Simultaneous users RAM size Disk size Machine example 1 - 10 512 MB 9 GB E800 10 - 50 2 GB 9 GB LC2000 Bi-processor 50 - 100 4 GB 18 GB LH6000 Quadri-processor _________________________________________________________________ Chapter 5. Frequently Asked Questions (FAQ) 5.1. [1700]"What's new in kernel 2.2 ?" 5.2. [1701]"What's new in kernel 2.4 ?" 5.3. [1702]"How to have more than 1 GB of RAM on my NetServer ?" 5.4. [1703]"How to have more than 128 MB of swap on my NetServer ?" 5.5. [1704]"How to use the other procesors of my NetServer ?" 5.6. [1705]"Is Linux Y2K compatible ?" 5.7. [1706]"How to increase the number of processes managed by the kernel ?" 5.8. [1707]"How to increase the number of loopback devices managed by the kernel ?" 5.9. [1708]"How to have files bigger than 2 GB on ext2 ?" 5.10. [1709]"How many NFS file systems can you mount on Linux ?" 5.1. "What's new in kernel 2.2 ?" Read [1710]Wonderful World of Linux 2.2 or [1711]the same in french. 5.2. "What's new in kernel 2.4 ?" Read [1712]Wonderful World of Linux 2.4. 5.3. "How to have more than 1 GB of RAM on my NetServer ?" The following information are adapted from the [1713]page of Rik van Riel. They concern 2.0.x as well as 2.2.x kernels, and 2.4.x. First of all, the IA32 Intel architecture is limited by construction in its memory management to 4 GB. Space which should be divided into virtual memory and physical memory. Which means that if you choose to recognize more RAM, the maximum size for a program decreases. But Linux can't manage more than 1 GB by default. To go above that, in fact up to 2 GB today, because Linux can't manage more memory for the moment, you need to modify 2 files provided with kernel sources and recompile it. Those 2 sources are /usr/src/linux/include/asm-i386/page.h and /usr/src/linux/arch/i386/vmlinux.lds. From 2.0.37 and 2.2.12 kernels on, the patch was integrated in the kernel and may be activated when doing a make {menu,x}config. The maximum Ram managed in the i386 version was ported to 64 GB after 2.3.23. 5.4. "How to have more than 128 MB of swap on my NetServer ?" Up to the version 2.8x of the util-linux package, the mkswap command could create swap partitions only up to 128 MB maximum. You then had to create as much partitions as necessary. Till the 2.9 version, included in standard in RedHat 6.0 and following distributions, it's possible to create directly swap partitions up to 2 GB and to 8 partitions. 2.4.x kernels support swapspaces of up to 64GB in size, and up to 64 swapspaces, but up to now mkswap doesn't creating swapspaces larger than 2GB. 5.5. "How to use the other procesors of my NetServer ?" Multi-processing is supported by Linux operationnaly till the 2.0 version of the kernel. For a 2.0.x kernel, you have to recompile it and set up the SMP variable in the Makefile to 1. For a 2.2.x or 2.4.x kernel, you have to set it up during the make {menu,x}config. For more details, please consult the [1714]SMP-HOWTO. 5.6. "Is Linux Y2K compatible ?" Generally, Linux is Y2K compatible. For more information please consult the [1715]FAQ. 5.7. "How to increase the number of processes managed by the kernel ?" For 2.2.x kernels, you need to edit the file /usr/src/linux/include/linux/tasks.h, modify the value of the constant NR_TASKS (512 by default) and set it to a value which doesn't exceed 4092 or 4090 if APM is configured. It could be useful to set MAX_TASKS_PER_USER at the same time to an appropriate value. Then recompile the kernel as usual. 5.8. "How to increase the number of loopback devices managed by the kernel ?" You need to edit the file /usr/src/linux/drivers/block/loop.c, For 2.2.x kernels, you need to modify the value of the constant MAXLOOP (8 by default). For 2.4.x kernels, you need to modify the value of the static int max_loop variable. Then recompile the kernel as usual. 5.9. "How to have files bigger than 2 GB on ext2 ?" You need to have a kernel 2.4.x, glibc 2.1.3 at least and that all necessary tools have been recompiled. Look at [1716]http://www.suse.de/~aj/linux_lfs.html 5.10. "How many NFS file systems can you mount on Linux ?" It's 64 for rw access. For read-only access, it could be increased. _________________________________________________________________ Chapter 6. Customer References Here is a list of HP/Linux references: * [1717]Amazon: Mix of HP-UX and Linux solutions as related on [1718]http://www.zdnetindia.com/techzone/linuxcentre/stories/42345 .html. * [1719]NetAge: HP Secure OS for Linux (aka Trusted linux). * [1720]Checkpoint: HP Secure OS for Linux (aka Trusted linux). * [1721]Side Effects: Port of their software [1722]Houdini on Linux. * [1723]Nothing Real: Port of their software [1724]Shake on Linux. * [1725]Boeing: Linux and HP clusters help Boeing R&D reduce costs as related on [1726]http://www.hp.com/products1/linux/infolibrary/boeing.html. * [1727]ViaWest: a hp/Linux ISP as related on [1728]http://www.hp.com/products1/linux/infolibrary/viawest.html. * [1729]Israel Aircraft Industry: a hp/Linux performance cluster user as related on [1730]http://www.hp.com/products1/linux/infolibrary/israel.html. * [1731]SpeedEra: a hp/Linux ISP as related on [1732]http://www.hp.com/products1/linux/infolibrary/speedera.html. * [1733]Dreamworks: The Shreck movie realised on HP netserver/Linux as related on [1734]http://www.zdnet.com/zdnn/stories/news/0,4586,2761566,00.htm l. * [1735]Cern: Performance cluster realised with HP kayak/Linux as related on [1736]http://hp-linux.cern.ch. * [1737]Viaccess: High availability cluster realised with HP Proliant/Linux as related on [1738]http://www.HyPer-Linux.org/HP-HOWTO/Docs/Viaccess.pdf. * [1739]Core Products: SAP with HP Netservers/Linux as related on [1740]http://www.HyPer-Linux.org/HP-HOWTO/Docs/CoreProducts.pdf. * [1741]California Institute of Technology's Center for Advanced Computing Research: TeraGrid project with an Itanium2 cluster on Linux as related on [1742]http://www.HyPer-Linux.org/HP-HOWTO/Docs/Caltech.pdf. * [1743]Center of Piezoelectrics by Design: Research project with Itanium2 servers on Linux as related on [1744]http://www.HyPer-Linux.org/HP-HOWTO/Docs/PiezoelectricDesign _SS.pdf and [1745]http://www.HyPer-Linux.org/HP-HOWTO/Docs/CPD_SS_hpVersion_A. pdf. * [1746]ESIEE: Gelato program Research project with Itanium2 servers on Linux as related on [1747]http://www.HyPer-Linux.org/HP-HOWTO/Docs/ESIEE_GB1.pdf. * [1748]National University Singapore: Life Science Research project with Itanium2 servers on Linux as related on [1749]http://www.HyPer-Linux.org/HP-HOWTO/Docs/mit_singapore.pdf. * [1750]Ohio Supercomputing Center: Life Science Research project with Itanium2 servers on Linux as related on [1751]http://www.hp.com/hpinfo/newsroom/press/2002/021021d.html. * [1752]Pacific Northwest National Laboratory: High Perfomance Computing Cluster of Itanium2 servers on Linux as related on [1753]http://www.HyPer-Linux.org/HP-HOWTO/Docs/PNNL_Cust_Success_f 2.pdf. * [1754]Rice University: High Perfomance Computing Cluster of Itanium2 servers on Linux as related on [1755]http://www.hp.com/hpinfo/newsroom/press/2002/021119e.html. * [1756]Samsung Advanced Institute of Technology: Grid Computing with Itanium2 servers on Linux as related on [1757]http://www.HyPer-Linux.org/HP-HOWTO/Docs/SAIT_Itanium-Succes s-Story.pdf. * [1758]University of Houston: High Perfomance Computing Cluster of Itanium2 servers on Linux as related on [1759]http://www.tlc2.uh.edu/Itanium2.htm. * [1760]BP: Seismic Imaging project with Itanium2 servers on Linux as related on [1761]http://www.hp.com/hpinfo/newsroom/press/2003/030421a.html. * [1762]German Police: Bea Java Application server for crime fightwith Itanium2 servers on Linux as related on [1763]http://www.HyPer-Linux.org/HP-HOWTO/Docs/PoliceSaxony.pdf. * [1764]Inria Grenoble: High Perfomance Computing Cluster of Itanium2 servers on Linux as related on [1765]http://www.HyPer-Linux.org/HP-HOWTO/Docs/Inria2-GB.pdf. * [1766]Pittsburgh Supercomputing Center: Grid Computing with Itanium2 servers on Linux as related on [1767]http://www.hp.com/hpinfo/newsroom/press/2002/021114c.html. * [1768]MIT Laboratory for Nuclear Science: Particles Computing with Ampha servers on Linux as related on [1769]http://www.hp.com/techservers/news/news_hpc_18995.html. * [1770]Queens University, Belfast: High Perfomance Computing Cluster of Itanium2 servers on Linux as related on [1771]http://www.HyPer-Linux.org/HP-HOWTO/Docs/Queens_Success_Stor y.pdf. * [1772]Norwegian University of Science and Technology: Grid Computing with Itanium2 servers on Linux as related on [1773]http://www.HyPer-Linux.org/HP-HOWTO/Docs/norway.pdf. * [1774]University of Regina, Canada: Computing and simulation with Ampha servers on Linux as related on [1775]http://www.HyPer-Linux.org/HP-HOWTO/Docs/success_regina.pdf. * [1776]Sandia National Laboratories: Nuclear research with Ampha servers on Linux as related on [1777]http://www.HyPer-Linux.org/HP-HOWTO/Docs/success_sandia.pdf. * [1778]University of Wuppertal, Germany: The biggest performance cluster in Germany with Ampha servers on Linux as related on [1779]http://www.hp.com/techservers/basic_research/success_wuppert al.html. * [1780]Boeing: Performance cluster with MSC.Linux as related on [1781]http://h30046.www3.hp.com/casestudy.php?topiccode=20020102_B oeing&searchid=0&showpage=&searchtopiccode=LINUXCASESTUDY&pagesite =LINUX®ioncode=&langcode=USENG. _________________________________________________________________ Chapter 7. References I already mentioned the documentation files, installed typically under the directory /usr/src/linux/Documentation. They are a real gold mine of useful information. The following FAQ (Frequently Asked Questions) are periodically posted in the group [1782]news:news.answers and archived on FTP servers like [1783]ftp://rtfm.mit.edu : * FAQ of the group [1784]news:comp.os.linux.announce * FAQ of the group [1785]news:comp.sys.hp.hpux A lot of other Linux HOWTO contain information useful related to our subject : * [1786]Linux SCSI HOWTO * [1787]Linux CD-Writing HOWTO * [1788]Linux Hardware HOWTO * [1789]Linux Distribution HOWTO * [1790]Linux Kernel HOWTO * [1791]Linux Sound HOWTO * [1792]Linux PCMCIA HOWTO * [1793]Linux SMP HOWTO * [1794]USB under Linux * [1795]Linux Laptop Guide * [1796]Linux on HP Laptops * [1797]Linux on HP iPAQ * [1798]Linux and most HP digital image products The following Usenet groups cover subjects related to HP : * [1799]news:comp.sys.hp.hardware * [1800]news:comp.sys.hp.misc You may also consult the groups mentioned in [1801]Section 2.2.2.5. On Internet, you may consult with a great benefit the following sites : Table 7-1. Web sites of HP Subject URL HP Linux Portal [1802]http://www.hp.com/go/linux HP and Linux [1803]http://www.hp-linux.org HP France Education Linux [1804]http://hpwww.ec-lyon.fr/hpeduc/education/offre/linux/educ_linux. html HP Support [1805]http://www.hp.com/hps/support/h_linux.htm HP HOWTO [1806]http://www.HyPer-Linux.org/HP-HOWTO/current/index.html Linux Pa-Risc (Puffin Group) [1807]http://www.parisc-linux.org Linux Pa-Risc (ESIEE) [1808]http://mkhppa1.esiee.fr/en/ PA-RISC/Linux Boot HOWTO [1809]http://mkhppa1.esiee.fr/parisc-linux-boot/parisc-linux-boot/inde x.html Linux and Handhelds devices [1810]http://www.handhelds.org iPAQ HOWTO [1811]http://mstempin.free.fr/linux-ipaq/ Compaq ACPI HOWTO [1812]http://www.cpqlinux.com/acpi-howto.html Linux and HP Labs [1813]http://www.hpl.hp.com/research/linux Linux IA64 [1814]http://www.linuxia64.org Linux IA64 (HP Labs) [1815]http://dtf.external.hp.com/dtf/swdev/1999/08/feature1_a.html HP embedded software developer's network [1816]http://devnet.hp.com HP printer drivers [1817]http://hp.sourceforge.net/ Compaq Servers and Linux [1818]http://www.cpqlinux.com HP RedHat certification [1819]http://bugzilla.redhat.com/certification/cert-report.php3?mod_co mpany=Hewlett+Packard HP Linuxcare certification [1820]http://www.linuxcare.com/labs/certs/C1F5.epl SAP HP Netserver certification [1821]http://www.sap.com/solutions/technology/linux/hp-hw.htm HP Utigroup [1822]http://www.hputigroup.com HP and Wireless [1823]http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ Table 7-2. Other fundamental sites on Linux and Open Source Software Subject URL Linux Documentation Project [1824]http://www.linuxdoc.org Linux Weekly News - Summary of 1998 [1825]http://lwn.net/1999/features/1998timeline/ Linux Weekly News - Summary of 1999 [1826]http://lwn.net/1999/features/Timeline/ Linux Weekly News - Summary of 2000 [1827]http://lwn.net/2000/features/Timeline/ Linux Weekly News - Summary of 2001 [1828]http://lwn.net/2001/features/Timeline/ Linux Weekly News - Summary of 2002 [1829]http://lwn.net/Articles/16858/ IOS Counter [1830]http://www.leb.net/hzo/ioscount/index.html Comparison MS-Windows NT Server 4.0 -- Unix [1831]http://www.linux-france.com/article/these/unix-vs-nt/unix-vs-nt. html Netcraft studies [1832]http://www.netcraft.com/survey/ L'AFUL (Association) [1833]http://www.aful.org APRIL (Association) [1834]http://www.april.org Linux Center [1835]http://www.linux-center.org Linux France [1836]http://www.linux-france.com/ Linux Journal [1837]http://www.linuxjournal.com Linux Gazette [1838]http://www.linuxgazette.com/ Linux Magazine France [1839]http://www.linuxmag-france.com/ Linux Start [1840]http://linuxstart.com/index.html Da Linux French Page [1841]http://linuxfr.org/news/ RedHat Hardware support [1842]http://www.redhat.com/cgi-bin/support RedHat 6.2 tips and tricks [1843]http://www.redhat.com/support/resources/gotchas/6.2/gotchas-6.2. html RedHat 7.1 tips and tricks [1844]http://www.redhat.com/support/resources/gotchas/7.1/gotchas-71.h tml Mandrake Hardware support for HP [1845]http://www.linux-mandrake.com/fr/hardware.php3?F_FAMILY=all&F_MA NUFACTURER=HP&F_STATUS=all&F_SEARCH=TRUE Mobilix : Linux Mobile [1846]http://tuxmobil.org/ Linux on Laptops [1847]http://www.linux-on-laptops.com Linux and Wireless [1848]http://linux-wlan.org/ Linmodems [1849]http://linmodems.org/ Notebook HQ : Linux Mobile [1850]http://www.linux-notebook.org/laptops/ Linux and Digital Cameras [1851]http://www.teaser.fr/~hfiguiere/linux/digicam.html Developers Servers [1852]http://www.linuxmama.com/dev-server.html IA-64 project leader Web site at Cern [1853]http://sverre.home.cern.ch/sverre/SJ.html IA-64 Intel Web site [1854]http://developer.intel.com/design/itanium/index.htm Medasys Linux [1855]http://www.medasys-digital-systems.fr/linux _________________________________________________________________ Chapter 8. Contributors I would like to thank especially all the people who contributed in any way to improve this HOWTO : * Markus Amersdorfer <[1856]markus.amersdorfer_at_aon.at> * Pierre-Antoine Angelini <[1857]angelini_at_ifsic.univ-rennes1.fr> * Emmanuel Avrillon <[1858]Emmanuel.Avrillon_at_hp.com> * Khalid Aziz <[1859]Khalid_Aziz_at_hp.com> * Sarah Barclay <[1860]Sarah_Barclay_at_hp.com> * Tim Bell <[1861]bhat_at_trinity.unimelb.edu.au> * Jeroen ten Berge <[1862]j.ten.berge_at_getexo.nl> * Sylvain Bergé <[1863]Sylvain.Berge_at_medasys-digital-systems.fr> * Richard Black <[1864]richard.black_at_hp.com> * Nancy Blachman <[1865]nancy_at_blachman.org> * Daniele Boffi <[1866]boffi_at_dimat.unipv.it> * Stéphane Bortzmeyer <[1867]bortzmeyer_at_debian.org> * Brendan Burns <[1868]bburns_at_wso.williams.edu> * Larry Buttler <[1869]larry_butler_at_hp.com> * Sylvan Butler <[1870]sylvan.butler_at_hp.com.invalid> * Emmanuel Carras <[1871]emmanuel_carras_at_hp.com> * Kevin Carson <[1872]kevin_carson_at_hp.com> * Mike Castle <[1873]dalgoda_at_ix.netcom.com> * Jean-Bernard Chaffardon <[1874]Jean-Bernard_Chaffardon_at_hp.com> * Khalil Chawoshi <[1875]chawoshi_at_subatech.in2p3.fr> * Béatrice Cornec <[1876]beatrice_at_victoria.frmug.org> * Michael Corral <[1877]mcorral_at_mediaone.net> * Sébastien Cottalorda <[1878]sebastien.cottalorda_at_mageos.com> * Rocky Craig <[1879]rocky_at_fc.hp.com> * Nug Csigas <[1880]nug_at_sch.bme.hu> * Mry Deck <[1881]Mary.Deck_at_hp.com> * Philippe Depouilly <[1882]Philippe.Depouilly_at_math.u-bordeaux.fr> - his site : [1883]http://www.math.u-bordeaux.fr/~depouill * Ludovic Didierlaurent <[1884]ludovic_didierlaurent_at_hp.com> * Yann Dirson <[1885]ydirson_at_fr.alcove.com> * Frédéric Dubuy <[1886]F.Dubuy_at_atrid.fr> * Dominique Dumont <[1887]dominique.dumont_at_hp.com> * Michael Dwyer <[1888]mdwyer_at_alumbre-tech.com> * Stéphane Eranian <[1889]Stephane_Eranian_at_hp.com> * Mark Eve <[1890]Mark_Eve_at_hp.com> * Greg Ferguson <[1891]gferg_at_hoop.timonium.sgi.com> * Gabor Fleischer <[1892]omnibook_at_exodus.fleischer.hu> * Christian Frank <[1893]cfrank_at_grc.hp.com> * Dann Frazier <[1894]dannf_at_fc.hp.com> * Laurent Frey <[1895]laurent.frey_at_iota.u-psud.fr> * Bertrand Gambier <[1896]Bertrand.Gambier_at_medasys-digital-systems.fr> * Bdale Garbee <[1897]Bdale_Garbee_at_hp.com> * Wilson Gardiner <[1898]Wilson_Gardiner_at_hp.com> * Stein Roar Gjøen <[1899]stein.roar.gjoen_at_ks-t.no> * Gary L. Grebus <[1900]glg_at_grebus.com> * Grant Grundler <[1901]grundler_at_cup.hp.com> * Jérémie Guillaume <[1902]jno_at_sasi.fr> * Yann Guillemot <[1903]Yann_Guillemot_at_hp.com> * Christof Haentschke <[1904]christof.haentschke_at_hp.com> * Chris Hanson <[1905]cph_at_zurich.ai.mit.edu> * Jim Harritt <[1906]jlh_at_trinidad.cv.hp.com> * Werner Heuser <[1907]wehe_at_snafu.de> * Marc Hia Balié <[1908]Marc_Hia-Balie_at_hp.com> * Markus Herber <[1909]Markus.Herber_at_hp.com> * Jesse Don Hickson III <[1910]theme_at_montana.com> * Chris Holden <[1911]chris.holden_at_gte.net> * Keith Hopkins <[1912]keith_hopkins_at_hp.com> * Masanari Iida <[1913]Masanari_Iida_at_hp.com> * Brett Johnson <[1914]Brett_Johnson_at_hp.com> * Martin Johnson <[1915]martin_at_martinshouse.com> * Tim Jones <[1916]timothy.jones_at_hp.com> * Arno Keller <[1917]arno_keller_at_hp.com> * Rainer Kiehne <[1918]rainer.kiehne_at_tu-clausthal.de> * Bruce Kives <[1919]Bruce_Kives_at_hp.com> * Bernhard Klapper <[1920]bernhard_kappler_at_hp.com> * Markus Kuhn <[1921]Markus.Kuhn_at_cl.cam.ac.uk> * Claude Labroille <[1922]claude.labroille_at_wanadoo.fr> * Craig Lamparter <[1923]raiger_at_hemna.rose.hp.com> * Pascal Lemonnier <[1924]Pascal.Lemonnier_at_medasys.fr> * Frédéric Lepied <[1925]flepied_at_mandrakesoft.com> * Qing Liu <[1926]qliu_at_club-internet.fr> * Fabrice Lorrain <[1927]Fabrice.Lorrain_at_univ-mlv.fr> * Maciej Macowicz <[1928]Maciej.Macowicz_at_epfl.ch> * Anne-Marie Mahfouf <[1929]a-m.mahfouf_at_lineone.net> * Olivier Martinet <[1930]Olivier_Martinet_at_hp.com> * Mad Matt <[1931]madmatt_at_bits.bris.ac.uk> - his site : [1932]http://www.bits.bris.ac.uk/madmatt/laptop.shtml * Lee Mayes <[1933]Lee_Mayes_at_hp.com> * Craig McCluskey <[1934]mccluskey_at_nospam.mail.utexas.edu> * David Mentré <[1935]David.Mentre_at_irisa.fr> * Jacques Misselis <[1936]Jacques.Misselis_at_hp.com> * Jérôme Mollier-Pierret <[1937]j.mollier_at_actinux.com> * Lars Nakkerud <[1938]lars.nakkerud_at_hp.com> * Oliver Neukum <[1939]520047054719-0001_at_t-online.de> * Andreas Nierula <[1940]A.Nierula_at_t-online.de> * Robert J. Niland <[1941]robert_niland_at_hp.com> * Gilles Noisette <[1942]Gilles_Noisette_at_hp.com> * Harry Page <[1943]HARRY_PAGE_at_HP-NewZealand-om1.om.hp.com> * Luis Pais <[1944]Luis_Pais_at_hp.com> * Alain Pascal <[1945]pascal_at_montrouge.omnes.slb.com> * David Paschal <[1946]paschal_at_rcsis.com> * Tom A Pedersen <[1947]tomarep_at_online.no> * Luis Peromarta <[1948]Luis_Peromarta_at_hp.com> * Soos Peter <[1949]sp_at_osb.hu> * Nicolas Pettiaux <[1950]nicolas.pettiaux_at_openbe.org> * Daryl Poe <[1951]Daryl_Poe_at_hp.com> * Thomas Pornin <[1952]Thomas.Pornin_at_ens.fr> * Karthik Prabhakar <[1953]karthik_prabhakar_at_hp.com> * Fons Rademakers <[1954]Fons.Rademakers_at_cern.ch> - his site : [1955]http://hp-linux.cern.ch * Ram Rao <[1956]Ram.Rao_at_hp.com> * Gallig Renaud<[1957]Gallig_Renaud_at_hp.com> * Valerie Rice<[1958]Valerie_Rice_at_hp.com> * Carl Riches<[1959]riches_at_ms.washington.edu> * Lane Rollins <[1960]laner_at_teleport.com> * Hester van Rooyen <[1961]reception_at_geo.co.za> * Eric Rueda <[1962]Eric_Rueda_at_hp.com> * Rob Savoye <[1963]rob_at_welcomehome.org> * Klamer Schutte <[1964]Schutte_at_fel.tno.nl> * Thierry Simonnet <[1965]t.simonnet_at_esiee.fr> * Chuck Slivkoff <[1966]charles_slivkoff_at_hp.com> * Junichi Shimoda <[1967]junichi_shimoda_at_hp.com> * Jeff Spray <[1968]Jeff.Spray_at_zf.com> * Tech Support <[1969]support_at_ami.com> * Roman Stanchak <[1970]rstanchak_at_yahoo.com> * Dean Stevenson <[1971]dean.stevenson_at_hp.com> * Khader V Syed <[1972]skhader_at_hp.com> * Olivier Tharan <[1973]olivier.tharan_at_idealx.com> * Nicolas Thomas <[1974]Nicolas_Thomas_at_hp.com> * Venkatesh Pallipadi <[1975]Venkatesh.Pallipadi_at_intel.com> * Jimmy Vance <[1976]Jimmy.Vance_at_hp.com> * Nathalie Viollet <[1977]Nathalie.Viollet_at_hp.com> * Henrik Von Klopp <[1978]hvk_at_hp.se> * Dirk De Wachter <[1979]Dirk.DeWachter_at_rug.ac.be> * Norman Walsh <[1980]ndw_at_nwalsh.com> * Régis Wira <[1981]rwira_at_mandrakesoft.com> * Hans Witvliet <[1982]Hans.Witvliet_at_Alcatel.nl> * Tony White <[1983]tony_at_ycs.com.au> * Yuthay Yean <[1984]Yuthay.Yean_at_medasys.fr> * Katsuyuki Yumoto <[1985]yumoto_at_jpn.hp.com> _________________________________________________________________ Chapter 9. Future versions This chapter gives indications on elements which should be taken in account in future versions of this document. It should be taken more as a reminder for the author, than as an engagement of what he will really do ! Version 0.96 Images path. Better management of the size of tables (PS). Place of the footer (PS). One line paragraph management. Management of the size of papers, margins and images (PS). Paragraph on TX/e-vectra management Rework the printer paragraph Info script to pass on machines and create a new entry Integrate LinuxCare certif Version 0.97 URLs verification in function of the language. Use of official addresses and paragraph on mirrors. Rework the cluster part Paragraph on APM for mobiles computer Linux as a backup server (Arkeia) Remote Assistant - Remote Control. Management Put the Argumementations in the TOC (HTML). Avoid titles in end of page (PS). Paragraph on network products Version 0.98 Detail limitations of evolution from Unix to Linux Rework the example of the vaccine :-) Rework chapter 1 (put there history and new versions) Glossary/Abbreviations _________________________________________________________________ Appendix A. GNU Free Documentation License Version 1.1, March 2000 Copyright (C) 2000 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. _________________________________________________________________ 0. PREAMBLE The purpose of this License is to make a manual, textbook, or other written document "free" in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others. This License is a kind of "copyleft", which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software. We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference. _________________________________________________________________ 1. APPLICABILITY AND DEFINITIONS This License applies to any manual or other work that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. The "Document", below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as "you". A "Modified Version" of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language. A "Secondary Section" is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document's overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (For example, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them. The "Invariant Sections" are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. The "Cover Texts" are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A "Transparent" copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, whose contents can be viewed and edited directly and straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup has been designed to thwart or discourage subsequent modification by readers is not Transparent. A copy that is not "Transparent" is called "Opaque". Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML designed for human modification. Opaque formats include PostScript, PDF, proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML produced by some word processors for output purposes only. The "Title Page" means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, "Title Page" means the text near the most prominent appearance of the work's title, preceding the beginning of the body of the text. _________________________________________________________________ 2. VERBATIM COPYING You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3. You may also lend copies, under the same conditions stated above, and you may publicly display copies. _________________________________________________________________ 3. COPYING IN QUANTITY If you publish printed copies of the Document numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects. If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages. If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a publicly-accessible computer-network location containing a complete Transparent copy of the Document, free of added material, which the general network-using public has access to download anonymously at no charge using public-standard network protocols. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public. It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document. _________________________________________________________________ 4. MODIFICATIONS You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version: A. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission. B. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has less than five). C. State on the Title page the name of the publisher of the Modified Version, as the publisher. D. Preserve all the copyright notices of the Document. E. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices. F. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below. G. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document's license notice. H. Include an unaltered copy of this License. I. Preserve the section entitled "History", and its title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section entitled "History" in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence. J. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the "History" section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission. K. In any section entitled "Acknowledgements" or "Dedications", preserve the section's title, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein. L. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles. M. Delete any section entitled "Endorsements". Such a section may not be included in the Modified Version. N. Do not retitle any existing section as "Endorsements" or to conflict in title with any Invariant Section. If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version's license notice. These titles must be distinct from any other section titles. You may add a section entitled "Endorsements", provided it contains nothing but endorsements of your Modified Version by various parties--for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard. You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one. The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version. _________________________________________________________________ 5. COMBINING DOCUMENTS You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice. The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work. In the combination, you must combine any sections entitled "History" in the various original documents, forming one section entitled "History"; likewise combine any sections entitled "Acknowledgements", and any sections entitled "Dedications". You must delete all sections entitled "Endorsements." _________________________________________________________________ 6. COLLECTIONS OF DOCUMENTS You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects. You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document. _________________________________________________________________ 7. AGGREGATION WITH INDEPENDENT WORKS A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, does not as a whole count as a Modified Version of the Document, provided no compilation copyright is claimed for the compilation. Such a compilation is called an "aggregate", and this License does not apply to the other self-contained works thus compiled with the Document, on account of their being thus compiled, if they are not themselves derivative works of the Document. If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one quarter of the entire aggregate, the Document's Cover Texts may be placed on covers that surround only the Document within the aggregate. Otherwise they must appear on covers around the whole aggregate. _________________________________________________________________ 8. TRANSLATION Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License provided that you also include the original English version of this License. In case of a disagreement between the translation and the original English version of this License, the original English version will prevail. _________________________________________________________________ 9. TERMINATION You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this License. Any other attempt to copy, modify, sublicense or distribute the Document is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. _________________________________________________________________ 10. FUTURE REVISIONS OF THIS LICENSE The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See [1986]http://www.gnu.org/copyleft/. Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License "or any later version" applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation. _________________________________________________________________ Addendum: How to use this License for your documents To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page: Copyright (c) YEAR YOUR NAME. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with the Invariant Sections being LIST THEIR TITLES, with the Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST. A copy of the license is included in the section entitled "GNU Free Documentation License". If you have no Invariant Sections, write "with no Invariant Sections" instead of saying which ones are invariant. If you have no Front-Cover Texts, write "no Front-Cover Texts" instead of "Front-Cover Texts being LIST"; likewise for Back-Cover Texts. If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software. Références 1. http://www.hp.com/ 2. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#GFDL 3. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#INTRODUCTION 4. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN120 5. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN127 6. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN155 7. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#THANKS 8. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#PRESENTATION 9. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN231 10. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN234 11. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN257 12. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN266 13. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CONCEPTS 14. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN295 15. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CHOIX 16. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN545 17. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN603 18. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LINUX-VS-OS 19. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN618 20. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN626 21. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN630 22. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#HP-PRODUCTS 23. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN646 24. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN648 25. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN663 26. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#HP-HARDWARE 27. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN1012 28. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN7183 29. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN7595 30. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN7614 31. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN7883 32. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN7903 33. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN7909 34. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN7949 35. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8074 36. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8508 37. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8513 38. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#HP-SOFTWARE 39. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8554 40. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8675 41. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8688 42. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8701 43. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#HP-SOLUTIONS 44. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#HP-TRAINING 45. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#HP-OSSD 46. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#SIZING 47. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8861 48. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8863 49. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8895 50. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LINUX-INTRANET 51. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8929 52. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8990 53. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9022 54. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9054 55. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LINUX-COMPUTING 56. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LINUX-DESKTOP 57. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FAQ 58. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CUSTOMERS 59. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#REFERENCES 60. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CONTRIBUTEURS 61. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#TODO 62. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#GFDL 63. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FDL-PRE 64. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FDL-APPL 65. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FDL-COPY 66. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FDL-QUANTITY 67. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FDL-MODIF 68. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FDL-COMBO 69. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FDL-COLLEC 70. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FDL-AGGREG 71. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FDL-TRANSL 72. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FDL-TERM 73. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FDL-FUTUR 74. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FDL-FAQ 75. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN355 76. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN1035 77. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN1281 78. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN2131 79. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN2221 80. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN2321 81. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN3225 82. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN3424 83. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN3645 84. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN4185 85. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN4282 86. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN4907 87. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN4976 88. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN5076 89. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN5135 90. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN5242 91. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN5301 92. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN5966 93. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN6179 94. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN6387 95. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN7186 96. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN7664 97. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN7735 98. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN7764 99. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8009 100. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8082 101. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8371 102. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8866 103. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8898 104. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8932 105. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8961 106. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN8993 107. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9025 108. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9058 109. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9101 110. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9413 111. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9511 112. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#IDC1998 113. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#IDC1999 114. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETCRAFT 115. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#IOSCOUNTER 116. http://www.hp.com/ 117. http://www.medasys.fr/ 118. http://www.hp.com/ 119. news:fr.comp.os.linux.annonces 120. news:comp.os.linux.annonces 121. ftp://ftp.ibiblio.org/pub/Linux/docs/HOWTO/ 122. http://www.linuxdoc.org/HOWTO 123. http://www.freenix.org/unix/linux/HOWTO 124. http://www.hyper-linux.org/HP-HOWTO/current 125. http://www.HyPer-Linux.org/HP-HOWTO/old 126. http://www.HyPer-Linux.org/HP-HOWTO/current/index.html.fr 127. mailto:Bruno_at_HyPer-Linux.org 128. http://www.HyPer-Linux.org/HP-HOWTO/current/index.html.en 129. mailto:Bruno_at_HyPer-Linux.org 130. http://www.HyPer-Linux.org/HP-HOWTO/jp/index.html 131. mailto:junichi_shimoda_at_hp.com 132. mailto:Bruno_at_HyPer-Linux.org 133. mailto:sympa@eurolinux.grenoble.hp.com?subject=subscribe%20hp-howto 134. mailto:guylhem_at_rrremovethis.oeil.qc.ca 135. news:comp.sys.hp.hpux 136. http://hpux.cict.fr/ 137. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CONTRIBUTEURS 138. mailto:Marc_Hia-Balie_at_hp.com 139. http://www.cs.helsinki.fi/~torvalds/ 140. http://www.gnu.org/people/rms.html 141. mailto:nat_at_nataa.frmug.org 142. mailto:xc_at_itp.fr 143. mailto:dumas_at_Linux.EU.Org 144. mailto:Remy.Card_at_linux.org 145. mailto:Dany.Coffineau_at_alcatel.fr 146. mailto:Francois.Strobel_at_alcatel.fr 147. mailto:F.Dubuy_at_atrid.fr 148. mailto:pascal_at_montrouge.omnes.slb.com 149. mailto:Pascal.Lemonnier_at_medasys.fr 150. mailto:rse_at_engelschall.com 151. http://www.engelschall.com/sw/wml 152. mailto:cg_at_sgmltools.org 153. http://www.sgmltools.org/ 154. mailto:ndw_at_nwalsh.com 155. http://www.docbook.org/ 156. mailto:jjc_at_jclark.com 157. http://www.jclark.com/jade/ 158. mailto:cornec_at_victoria.frmug.org 159. http://www.gnu.org/ 160. http://www.opensource.org/ 161. http://www.freebsd.org/ 162. http://www.apache.org/ 163. http://www.samba.org/ 164. http://www.linuxdoc.org/HOWTO/INFO-SHEET.html 165. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CHOIX 166. http://www.cs.helsinki.fi/~torvalds/ 167. http://www.gnu.org/people/rms.html 168. http://www.catb.org/~esr 169. http://kiev.wall.org/~larry 170. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en 171. mailto:ask_tim_at_oreilly.com 172. http://www.apache.org/ 173. http://www5.zdnet.com/products/content/pcmg/1709/305867.html 174. http://www.samba.org/ 175. http://www.zdnet.com/sr/stories/news/0,4538,2196106,00.html 176. http://gartner6.gartnerweb.com/dq/static/about/press/pr-b9939.html 177. http://www.netcraft.com/survey/ 178. http://www.leb.net/hzo/ioscount/index.html 179. http://www.apache.org/ 180. http://www.dwheeler.com/oss_fs_why.html 181. http://www.apache.org/ 182. http://www.landfield.com/wu-ftpd 183. http://www.isc.org/bind.html 184. http://www.sendmail.org/ 185. http://www.postfix.org/ 186. http://www.isc.org/inn.html 187. http://juanjox.linuxhq.com/ 188. http://www.rustcorp.com/linux/ipchains/ 189. http://netfilter.samba.org/ 190. http://www.openssh.com/ 191. http://squid.nlanr.net/Squid/ 192. http://www.eecis.udel.edu/~ntp 193. http://www.openldap.org/ 194. http://www.midgard.org/ 195. ftp://ftp.lip6.fr/pub/rfc 196. ftp://ftp.mathematik.th-darmstadt.de/pub/linux/okir 197. ftp://ftp.kernel.org/pub/linux/devel/gcc/ 198. http://www.coda.cs.cmu.edu/ 199. http://www.inter-mezzo.org/ 200. http://www.cups.org/ 201. http://www.samba.org/ 202. http://www.compu-art.de/mars_nwe 203. http://www.umich.edu/~rsug/netatalk 204. http://www.irisa.fr/prive/mentre/smp-faq/ 205. http://hp-linux.cern.ch/ 206. http://www.mosix.org/ 207. http://www.linuxdoc.org/HOWTO/Beowulf-HOWTO.html 208. http://cesdis.gsfc.nasa.gov/linux/drivers/index.html#gigabit 209. http://lhpca.univ-lyon1.fr/myri.html 210. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 211. http://www.hylafax.org/ 212. http://www.amanda.org/ 213. http://www.arkeia.com/ 214. http://www.postgreSQL.org/ 215. http://www.mysql.org/ 216. http://platforms.oracle.com/linux/index_lin.htm 217. ftp://ftp.netscape.com/pub/communicator/ 218. http://www.mozilla.org/ 219. http://www.xulplanet.com/ndeakin/arts/reasons.html 220. http://www.konqueror.org/ 221. http://www.cc.ukans.edu/about_lynx/about_lynx.html 222. http://www.w3m.org/ 223. http://www.geocities.com/SiliconValley/6702/kmail.html 224. http://burka.netvision.net.il/xfmail/xfmail.html 225. http://www.mutt.org/ 226. ftp://ftp.uu.net/networking/mail/elm 227. http://www.adobe.com/supportservice/custsupport/LIBRARY/acrunix.htm 228. http://www.foolabs.com/xpdf/ 229. http://www.wizards.dupont.com/cristy/ImageMagick.html 230. http://www.gimp.org/ 231. http://www.real.com/products/player/downloadrealplayer.html?wp=dl0899&src=dlbutton_all%E2%8C%A9=en#form 232. http://www.lyx.org/ 233. http://www.latex-project.org/ 234. http://www.sgmltools.org/ 235. http://linux.corel.com/linuxproducts_wp8.htm 236. http://www.applix.com/applixware/linux/main.cfm 237. http://www.stardivision.com/office/so5linux_body.html 238. http://koffice.kde.org/ 239. http://www.openoffice.org/ 240. http://www.xmms.org/ 241. http://www.ueda.info.waseda.ac.jp/%7Esatoshi/midi/midi-e.html 242. http://metalab.unc.edu/tkan/xmcd 243. http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html 244. http://sunsite.auc.dk/BurnIT/ 245. http://www.ge.ucl.ac.uk/~jcpearso/mkisofs.html 246. http://www.xiph.org/paranoia/ 247. http://sourceforge.net/projects/cdrdao/ 248. http://www.winehq.com/ 249. http://www.ardi.com/ 250. http://www.calderasystems.com/doc/wabi/wabi.html 251. http://www.dosemu.org/ 252. http://www.netraverse.com/products/win4lin30 253. http://www.wmware.com/ 254. http://www.gnu.org/software/gcc/gcc.html 255. http://www.gnu.org/software/gcc/gcc.html 256. http://agnes.dida.physik.uni-essen.de/~gnu-pascal/ 257. http://www.gnu.org/software/fortran/fortran.html 258. http://freshmeat.net/projects/x11-basic/ 259. http://www.scriptics.com/products/tcltk/ 260. http://www.perl.com/ 261. http://www.python.org/ 262. http://www.adahome.com/Resources/Compilers/GNAT.html 263. http://www.loria.fr/projets/SmallEiffel/ 264. http://clisp.cons.org/~haible/clisp.html 265. http://www.scheme.org/ 266. http://www.gnu.org/software/prolog/prolog.html 267. http://www.pgroup.com/prod_description.html 268. http://www.intel.com/software/products/compilers/ 269. http://www.gnome.org/ 270. http://www.kde.org/ 271. http://www.opengroup.org/desktop/ 272. http://www.openmotif.org/ 273. http://people.debian.org/~jgb/debian-counting 274. http://sourceforge.net/projects/docbook 275. http://www.netfolder.com/DSSSL/index.html 276. http://www.oasis-open.org/docbook/ 277. http://www.vim.org/ 278. http://www.redhat.com/ 279. http://www.medasys.fr/ 280. http://www.atrid.fr/ 281. http://www.alcove.fr/ 282. http://www.france.hp.com/formation 283. http://www.learningtree.com/fr/index.htm 284. http://form-continue.iut-velizy.uvsq.fr/ 285. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#REFERENCES 286. http://www.linuxdoc.org/ 287. http://www.traduc.org/ 288. ftp://ftp.linet.gr.jp/pub/howto-translations 289. http://www.editions-oreilly.fr/ 290. http://www.ssc.com/ 291. http://www.microsoft.com/HCL 292. http://www.linuxdoc.org/HOWTO/Hardware-HOWTO.html 293. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#HP-HARDWARE 294. http://www.voila.fr/ 295. http://www.google.com/ 296. ftp://ftp.cdrom.com/ 297. http://www.linux-vs.org/ 298. http://www.opengfs.org/ 299. http://www.linux-ha.org/ 300. http://www.redhat.com/ 301. http://www.suse.de/ 302. http://www.slackware.com/ 303. http://www.linux-mandrake.com/en 304. http://www.turbolinux.com/ 305. http://www.debian.org/ 306. http://unix-vs-nt.org/kirch/ 307. http://www.opensource.org/halloween.html 308. http://people.trustcommerce.com/~adam/office.html 309. http://www.kegel.com/nt-linux-benchmarks.html 310. http://linuxshop.ru/linuxbegin/win-lin-soft-en 311. http://www.hp.com/go/linux 312. http://www.ec-lyon.fr/ 313. http://hpwww.ec-lyon.fr/hpeduc/education 314. http://www.medasys.fr/linux 315. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Docs/white-paper.pdf 316. http://www.li.org/ 317. http://www.osdlab.org/ 318. http://www.linuxbase.org/ 319. http://www.hp.com/communications/solutions/isp/tools/pressroom/releases/pr032999a.html 320. http://www.hp.com/pressrel/jan99/27jan99b.htm 321. http://www.hp.com/pressrel/jan99/27jan99.htm 322. http://www.hp.com/pressrel/mar99/01mar99e.htm 323. http://www.hp.com/pressrel/mar99/02mar99i.htm 324. http://www.hp.com/pressrel/mar99/17mar99e.htm 325. http://www.hp.com/pressrel/apr99/20apr99a.htm 326. http://www.openview.hp.com/solutions/itsm/press/press.asp?docid=314 327. http://www.businessservers.hp.com/falladvisor/sum99/Summer99/apache.html 328. http://www.hp.com/pressrel/jun99/21jun99g.htm 329. http://internetsolutions.enterprise.hp.com/linux/news/PRelease4.html 330. http://internetsolutions.enterprise.hp.com/linux/news/aberdeen_white_paper.html 331. http://www.hp.com/visualize/programs/news/archive/linuxvision.html 332. http://www.hp.com/pressrel/feb00/02feb00c.htm 333. http://www.hp.com/pressrel/feb00/02feb00b.htm 334. http://internetsolutions.enterprise.hp.com/linux/feb02page.html 335. http://www.hp.com/pressrel/jun00/13jun00a.htm 336. http://www.hp.com/pressrel/jul00/25jul00b.htm 337. http://www.hp.com/pressrel/aug00/14aug00.htm 338. http://www.linux.hp.com/news_events/press_releases/linux_chai.html 339. http://netserver.hp.com/netserver/docs/download.asp?file=cs_solid.pdf 340. http://hpwww.ec-lyon.fr/hpeduc/education/offre/linux/educ_linux.html 341. http://hpwww.ec-lyon.fr/hpeduc/education/offre/linux/hp_linux.html 342. http://www.linux.hp.com/news_events/open_letter.html 343. http://www.hp.com/hpinfo/newsroom/press/21nov00b.htm 344. http://www.HyPer-Linux.org/HP-HOWTO/mirror/html/perens.html 345. http://www.linux.hp.com/news_events/perens.html 346. http://www.doyoureallythinktheyspeakofthatinthepress.com/ 347. http://www.hp.com/hpinfo/newsroom/press/24jan01b.htm 348. http://www.hp.com/hpinfo/newsroom/press/31jan01a.htm 349. http://www.france.hp.com/main/une/temoignages/linux/expo.php3 350. http://www.itworld.com/Comp/2362/LWD010404hpdrivers/ 351. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Press/PREMEA20010822.pdf 352. http://solutions.journaldunet.com/itws/010824_it_hp_maillard.shtml 353. http://www.hp.com/hpinfo/newsroom/press/27aug01b.htm 354. http://www.hpl.hp.com/news/2001/oct-dec/supercomputer.html 355. http://www.hpbriefingroom.com/north_america/linux/index.html 356. http://www.hp.com/hpinfo/newsroom/press/06nov01a.htm 357. http://www.hp.com/hpinfo/newsroom/press/2001/011204b.html 358. http://www.hp.com/hpinfo/newsroom/press/2002/020129a.html 359. http://www.france.hp.com/produits/serveurs/hp-servers/pa-risc/linux.php3 360. http://www.hp.com/hpinfo/newsroom/press/2002/020130a.html 361. http://www.hp.com/hpinfo/newsroom/press/2002/020130b.html 362. http://www.01net.com/article/175483.html 363. http://www.hp.com/hpinfo/newsroom/press/2002/020311a.html 364. http://www.hp.com/hpinfo/newsroom/press/2002/020403a.html 365. http://www.hp.com/hpinfo/newsroom/press/2002/020416a.html 366. http://www.debian.org/vote/2002/vote_0001 367. http://www.hp.com/hpinfo/newsroom/press/2002/020423a.html 368. http://www.hp.com/hpinfo/newsroom/press/2002/020516b.html 369. http://www.hp.com/hpinfo/newsroom/press/03jun02c.htm 370. http://www.linuxjournal.com/article.php?sid=4803 371. http://www.linuxjournal.com/article.php?sid=6103 372. http://www.hp.com/hpinfo/newsroom/press/2002/020605d.html 373. http://www.hp.com/hpinfo/newsroom/press/2002/020611a.html 374. http://www.hp.com/hpinfo/newsroom/press/2002/020618c.html 375. http://www.hp.com/hpinfo/newsroom/press/2002/020618d.html 376. http://www.hp.com/hpinfo/newsroom/press/2002/020808b.html 377. http://www.hp.com/hpinfo/newsroom/press/2002/020813b.html 378. http://www.hp.com/hpinfo/newsroom/press/2002/020813c.html 379. http://www.hp.com/hpinfo/newsroom/press/2002/020813d.html 380. http://www.hp.com/hpinfo/newsroom/press/2002/020814a.html 381. http://www.hp.com/hpinfo/newsroom/press/2002/020916b.html 382. http://www.hp.com/hpinfo/newsroom/press/2002/020917c.html 383. http://www.hp.com/hpinfo/newsroom/press/2002/020925c.html 384. http://www.hp.com/hpinfo/newsroom/press/2002/020925b.html 385. http://www.hp.com/hpinfo/newsroom/press/2002/021021d.html 386. http://www.hp.com/hpinfo/newsroom/press/2002/021024b.html 387. http://www.hp.com/hpinfo/newsroom/press/2002/021031b.html 388. http://www.hp.com/hpinfo/newsroom/press/2002/021114c.html 389. http://www.hp.com/hpinfo/newsroom/press/2002/021119e.html 390. http://www.hp.com/hpinfo/newsroom/press/2002/021209b.html 391. http://www.hp.com/hpinfo/newsroom/press/2002/021209c.html 392. http://www.hp.com/hpinfo/newsroom/press/2003/030121g.html 393. http://www.hp.com/hpinfo/newsroom/press/2003/030319a.html 394. http://www.hp.com/hpinfo/newsroom/press/2003/030416d.html 395. http://www.hp.com/hpinfo/newsroom/press/2003/030421a.html 396. http://news.zdnet.co.uk/story/0,,t269-s2134514,00.html 397. http://www.hp.com/hpinfo/newsroom/press/2003/030522b.html 398. http://www.hp.com/hpinfo/newsroom/press/2003/030528a.html 399. http://www.hp.com/hpinfo/newsroom/press/2003/030529a.html 400. http://www.hp.com/hpinfo/newsroom/press/2003/030603a.html 401. http://www.hp.com/hpinfo/newsroom/press/2003/030610a.html 402. http://www.hp.com/hpinfo/newsroom/press/2003/030624c.html 403. http://www.hp.com/hpinfo/newsroom/press/2003/030626a.html 404. http://www.hp.com/hpinfo/newsroom/press/2003/030701c.html 405. http://www.hp.com/hpinfo/newsroom/press/2003/030702a.html 406. http://www.HyPer-Linux.org/HP-HOWTO/mirror/html/video2001.ram 407. http://www.HyPer-Linux.org/HP-HOWTO/mirror/html/video2002.ram 408. http://www.linuxdoc.org/HOWTO/Installation-HOWTO.html 409. http://www.linuxdoc.org/HOWTO/Kernel-HOWTO.html 410. http://www.hp.com/cposupport/software.html 411. http://www.hp.com/desktops/linux/ 412. http://www.hp.com/pressrel/aug00/14aug00.htm 413. http://www.hp.com/desktops/linux/linuxfaq.html 414. http://www.support.vectra.hp.com/vectrasupport/indexes/Driver39.html 415. http://www.mandrakesoft.com/oem/hardwarepart/hp 416. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 417. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 418. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 419. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 420. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 421. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G100 422. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 423. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 424. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 425. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 426. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BAX 427. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 428. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 429. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BAX 430. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 431. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 432. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 433. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 434. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#SAVAGE 435. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 436. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 437. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#SAVAGE 438. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 439. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 440. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 441. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 442. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 443. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 444. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 445. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 446. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 447. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 448. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 449. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 450. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 451. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 452. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 453. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 454. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 455. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 456. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 457. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 458. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 459. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 460. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3COM 461. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 462. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 463. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G100 464. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 465. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AZTEC2320 466. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 467. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 468. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G100 469. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 470. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3COM 471. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 472. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AZTEC2320 473. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 474. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 475. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 476. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 477. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 478. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3COM 479. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 480. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 481. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 482. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3COM 483. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 484. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 485. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 486. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 487. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CL5465 488. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 489. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 490. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CL5465 491. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 492. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 493. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G100 494. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 495. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 496. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G100 497. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 498. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3COM 499. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 500. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 501. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G100 502. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 503. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3COM 504. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 505. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 506. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 507. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 508. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 509. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3COM 510. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 511. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 512. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 513. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3COM 514. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 515. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 516. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 517. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 518. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 519. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 520. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 521. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#COPER 522. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 523. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 524. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 525. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 526. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#COPER 527. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G450 528. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 529. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 530. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 531. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#COPER 532. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 533. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 534. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 535. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#COPER 536. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 537. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 538. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 539. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 540. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 541. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 542. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 543. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 544. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 545. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 546. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 547. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 548. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 549. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 550. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 551. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 552. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 553. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 554. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 555. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 556. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 557. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 558. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 559. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#COPER 560. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 561. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 562. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#COPER 563. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 564. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 565. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 566. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#COPER 567. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 568. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 569. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 570. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#COPER 571. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G450 572. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 573. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 574. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 575. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#COPER 576. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 577. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 578. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I850 579. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G450 580. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 581. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 582. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I850 583. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 584. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 585. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 586. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I850 587. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 588. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 589. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 590. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#SBLIVE 591. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I850 592. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 593. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 594. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I850 595. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 596. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 597. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 598. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 599. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 600. http://www.compaq.com/products/servers/linux/clientscert.html 601. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I845 602. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 603. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 604. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I845 605. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 606. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 607. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I845 608. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 609. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 610. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I845 611. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 612. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 613. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 614. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 615. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 616. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 617. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 618. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 619. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 620. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 621. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 622. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 623. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 624. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 625. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#EPCMDK 626. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 627. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 628. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 629. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CL5465 630. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 631. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CL5465 632. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 633. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CL5465 634. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 635. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 636. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AD1816 637. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 638. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 639. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 640. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 641. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AZTEC2320 642. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 643. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ELSA 644. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 645. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 646. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 647. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 648. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ELSA 649. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 650. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 651. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 652. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 653. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 654. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 655. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G100 656. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 657. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 658. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G100 659. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 660. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 661. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 662. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 663. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 664. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 665. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 666. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 667. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 668. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 669. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ELSA 670. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 671. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 672. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 673. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 674. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 675. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 676. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 677. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 678. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 679. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G100 680. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 681. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 682. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 683. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 684. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 685. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 686. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 687. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AD1816 688. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 689. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 690. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 691. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 692. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 693. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MODDOS 694. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 695. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 696. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MODTBLINUX 697. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 698. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 699. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 700. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 701. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 702. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 703. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 704. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 705. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 706. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 707. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 708. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 709. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 710. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 711. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 712. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 713. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 714. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 715. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 716. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 717. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 718. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 719. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 720. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AD1816 721. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 722. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 723. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ELSA 724. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 725. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 726. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 727. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 728. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 729. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G100 730. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 731. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 732. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 733. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 734. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G450 735. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 736. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G450 737. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 738. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XU800 739. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 740. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 741. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XU800 742. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 743. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 744. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XU800 745. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MODDOS 746. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 747. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 748. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 749. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XU800 750. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 751. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 752. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 753. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XU800 754. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 755. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 756. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 757. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XU800 758. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MODTBLINUX 759. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 760. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 761. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 762. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XU800 763. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 764. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 765. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 766. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XU800 767. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 768. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 769. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 770. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 771. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ELSA 772. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 773. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 774. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 775. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 776. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 777. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FX6 778. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 779. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 780. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 781. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 782. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FX6 783. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 784. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FX6 785. http://www.netroedge.com/~lm78 786. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 787. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 788. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 789. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 790. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 791. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3COM 792. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 793. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 794. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C59X 795. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 796. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 797. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 798. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 799. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 800. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 801. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 802. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 803. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 804. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 805. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ELSA 806. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 807. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 808. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 809. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AD1816 810. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 811. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 812. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 813. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 814. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AD1816 815. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 816. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 817. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 818. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 819. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FX10 820. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 821. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 822. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 823. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FX10 824. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 825. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 826. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 827. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 828. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ELSA 829. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 830. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MIXTE1 831. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 832. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AD1816 833. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 834. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 835. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 836. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 837. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FX10 838. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 839. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 840. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 841. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FX10 842. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 843. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 844. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 845. http://www.hp.com/workstations/products/linux/index.html 846. http://www.hp.com/visualize/programs/news/archive/qa1.html 847. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/hpfx6_beta.tar.gz 848. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/hpfx6_beta_kernel.tar.gz 849. http://www.hp.com/workstations/support/software/drivers/linux/video/fxvideo/fx6/driver.html? 850. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/hpgraphics-1.5.13-1.i386.rpm 851. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/hpgraphics_kernel-1.5.13-1.src.rpm 852. http://www.hp.com/workstations/support/software/drivers/linux/video/fxvideo/fx10/index.html 853. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 854. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 855. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 856. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G450 857. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 858. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 859. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 860. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 861. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 862. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 863. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 864. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 865. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 866. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 867. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 868. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 869. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#X2100 870. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 871. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G450 872. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 873. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 874. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 875. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 876. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FIREGL 877. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 878. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FIREGL 879. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 880. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 881. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 882. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 883. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 884. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 885. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#X4000 886. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 887. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 888. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#X4000 889. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G450 890. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 891. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 892. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 893. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#X4000 894. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 895. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 896. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 897. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 898. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#X4000 899. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FIREGL 900. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 901. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FIREGL 902. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 903. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 904. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#X4000 905. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 906. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 907. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#X4000 908. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 909. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 910. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#X4000 911. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 912. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 913. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 914. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 915. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I845 916. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 917. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 918. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I845 919. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 920. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 921. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 922. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 923. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 924. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 925. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 926. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 927. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 928. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 929. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 930. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC79XX 931. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 932. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 933. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 934. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 935. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 936. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 937. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FIREGL 938. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 939. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FIREGL 940. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#G450 941. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 942. http://www.3dlabs.com/support/drivers/linux/linux_drivers.htm 943. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 944. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 945. http://e2fsprogs.sourceforge.net/ 946. http://www.gnu.org/software/parted/ 947. http://www.procyon.com/~pda/lphdisk 948. http://www.digitalmc.org/~roman/XF86Config-4 949. http://www.swiss.ai.mit.edu/projects/omnibook/ 950. http://www.linux-on-laptops.com/hp.html 951. http://acpi.sourceforge.net/dsdt/view.php?manufacturer=HP 952. http://sourceforge.net/projects/omke 953. http://compass.com/synaptics/ 954. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 955. http://www.bits.bris.ac.uk/madmatt/laptop.shtml 956. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XE 957. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LYNXE 958. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 959. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MAESTRO 960. http://www.linuxia.de/omnibook-xe2.en.html 961. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XE 962. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LYNXE 963. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 964. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MAESTRO 965. http://www.math.u-bordeaux.fr/~depouill/XE3/index.html 966. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XE 967. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XE3 968. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#SAVAGE 969. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 970. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MAESTRO 971. http://www.math.u-bordeaux.fr/~depouill/XE3/index.html 972. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XE 973. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XE3 974. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#SAVAGE 975. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 976. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MAESTRO 977. http://www.math.u-bordeaux.fr/~depouill/XE3/index.html 978. http://homex.subnet.at/~max/comp-05_hp-omnibook-xe3.shtml 979. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XE3 980. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 981. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 982. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MAESTRO 983. http://www.math.u-bordeaux.fr/~depouill/XE3/index.html 984. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XE3 985. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 986. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 987. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 988. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MAESTRO 989. http://www.net42.co.uk/linux-on-xe4500.shtml 990. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XT6200 991. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 992. http://www.cc.jyu.fi/~jajuhein/xe4500/debian-on-xe4500.html 993. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 994. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 995. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XT6200 996. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 997. http://www.obviously.com/laptops/OmniBook500linux.html 998. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 999. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 1000. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ATIPORT 1001. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MAESTRO 1002. http://www.climate.unibe.ch/~beyerle/linux/omnibook500/ 1003. http://www.swiss.ai.mit.edu/projects/omnibook/details.php?MODEL=500 1004. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1005. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 1006. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ATIPORT 1007. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C556 1008. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MAESTRO 1009. http://www.animoi.com/~apiira/omnibook510.html 1010. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 1011. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1012. http://www.cs.hmc.edu/~fleck/iowa-lab/omnibook.html 1013. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#OB600 1014. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1015. http://tuxmobil.org/hp800e.html 1016. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1017. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1018. http://people.ne.mediaone.net/dorscm/Linux/HP900install.html 1019. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1020. http://www.hpl.hp.com/personal/Philippe_Bernadat/omni900/ 1021. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1022. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 1023. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ATIPORT 1024. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MAESTRO 1025. http://www.sbellon.de/xt1000.html 1026. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#SAVAGE 1027. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1028. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1029. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1030. http://xenu.phys.uit.no/~tom/OmniBook3000CTX.html 1031. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1032. http://tuxmobil.org/hp3100e.html 1033. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1034. http://www.personal.psu.edu/users/a/x/axg189/linux/omni4000c.html 1035. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1036. http://www.urbaczewski.com/omnibooklinux.htm 1037. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1038. http://www.wien.netsurf.at/franz.fiala/omni4150.html 1039. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#OB4150 1040. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1041. http://ltswww.epfl.ch/~dsanta/resources/hp4150-linux 1042. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1043. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 1044. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ATIPORT 1045. http://www.ens.fr/~dicosmo/Linux/OmniBook5000.html 1046. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1047. http://foobar.starlab.net/~soggie/hp-omnibook-5500ct/ 1048. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1049. http://www.best.com/~mcrosbie/Linux/ob5700.html 1050. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1051. http://www.math.psu.edu/dna/omnibook6000-linux.html 1052. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#OB6000 1053. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1054. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#FBDEV 1055. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ATIPORT 1056. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#C3C556 1057. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MAESTRO 1058. http://www.administra.tion.ca/omnibook-6000/ 1059. http://www.mastincrosbie.com/mark/linux-ob6k/ob6000.html 1060. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#I810 1061. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1062. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#OB6100 1063. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1064. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1065. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MAESTRO 1066. http://klee.cs.depaul.edu/ajeffrey/omnibook.html 1067. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1068. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1069. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MAESTRO 1070. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ORINOCO 1071. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#OMNIBOOK 1072. http://www.linux-on-laptops.com/compaq.html 1073. http://acpi.sourceforge.net/dsdt/view.php?manufacturer=Compaq 1074. http://larve.net/people/hugo/2002/12/evo410.html 1075. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1076. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1077. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 1078. http://www.psychosis.net/evo-linux/ 1079. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1080. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1081. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 1082. http://www.brokedown.net/~squash2/n600c.html 1083. http://www.fettig.net/articles/EvoN610c/ 1084. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1085. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1086. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 1087. http://www.scrye.com/~kevin/presario-2800.html 1088. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1089. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1090. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 1091. http://www-dimat.unipv.it/~boffi/compaq/ 1092. http://www.ailis.de/~k/knowledge/evon800c/ 1093. http://handhelds.org/~gberenfield/Jornada/ 1094. http://www.arm.linux.org.uk/developer/machines/?action=list&id=48 1095. http://www.handhelds.org/projects/jornada.html 1096. http://www.onlamp.com/lpt/a/3860 1097. http://www.handhelds.org/projects/h1900.html 1098. http://www.handhelds.org/Compaq/iPAQH3100/ 1099. http://www.handhelds.org/Compaq/iPAQH3600/ 1100. http://www.handhelds.org/projects/h3800.html 1101. http://www.handhelds.org/projects/h3900.html 1102. http://www.handhelds.org/projects/h5400.html 1103. http://www.arm.linux.org.uk/developer/machines 1104. http://www.handhelds.org/ 1105. http://mstempin.free.fr/linux-ipaq/ 1106. http://www.handhelds.org/mailman/listinfo/ipaq 1107. http://linux-tablet-pc.dhs.org/ 1108. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1109. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 1110. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1111. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 1112. http://www.netserver.hp.com/netserver/products/highlights_linux.asp 1113. http://netserver.hp.com/products/highlights_nos.asp 1114. http://www.jpn.hp.com/biz/products/pcserver/linux/document/pdf/rh70_lp1000r_megamgr.pdf 1115. http://www.jpn.hp.com/biz/products/pcserver/linux/document/pdf/instanttt-rh62.pdf 1116. http://www.redhat.com/ 1117. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Docs/netserver-rh5.2.pdf 1118. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Docs/netserver-rh6.0.pdf 1119. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1120. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1121. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1122. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1123. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1124. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1125. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1126. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1127. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1128. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1129. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1130. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1131. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1132. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1133. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1134. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1135. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1136. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#IDE1 1137. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1138. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1139. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1140. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1141. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1142. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1143. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1144. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1145. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 1146. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1147. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1148. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1149. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#COPER 1150. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LC2000 1151. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MODB 1152. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1153. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1154. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1155. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1156. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1157. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1158. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1159. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1160. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1161. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1162. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 1163. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 1164. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1165. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1166. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1167. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 1168. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 1169. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MODB 1170. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1171. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1172. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 1173. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 1174. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LH4 1175. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#PROCS 1176. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1177. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1178. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1179. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 1180. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 1181. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LH6000 1182. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#PROCS 1183. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MODB 1184. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1185. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1186. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 1187. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1188. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1189. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1190. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LPXKR 1191. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#IDE1 1192. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1193. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1194. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1195. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LPXKR 1196. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#IDE1 1197. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MODRHLINUX 1198. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1199. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1200. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1201. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LPXKR 1202. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#IDE1 1203. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MODRHLINUX 1204. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1205. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1206. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1207. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LPXKR 1208. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#IDE1 1209. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1210. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1211. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1212. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CLUSTER 1213. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1214. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1215. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1216. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BX 1217. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 1218. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#LT6000 1219. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#PROCS 1220. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MODB 1221. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1222. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1223. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1224. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1225. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#PROCS 1226. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1227. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1228. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#PROCS 1229. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1230. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1231. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1232. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1233. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1234. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1235. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1236. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1237. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1238. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1239. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1240. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1241. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#TC3100 1242. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1243. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1244. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1245. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#TC3100 1246. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1247. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1248. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NCR53C8XX 1249. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#TC3100 1250. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1251. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1252. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 1253. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 1254. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 1255. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NRM 1256. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 1257. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NRM 1258. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 1259. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 1260. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 1261. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID4M 1262. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1263. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1264. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1265. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1266. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1267. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1268. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#BCM5700 1269. http://www.emulex.com/ts/docfc/linuxframe.htm 1270. http://www.aztech.com.sg/products/um9800.htm 1271. http://www.aztech.com.sg/driver/modem_um9800.htm 1272. http://www.compaq.com/products/servers/linux/whitepapers.html 1273. http://h18000.www1.hp.com/products/servers/linux/15ad-0701a-wwen.html 1274. http://www.compaq.com/products/servers/linux/hpLinuxcert.html 1275. http://www.compaq.com/products/servers/linux/softwaredrivers.html 1276. http://www.cpqlinux.com/ 1277. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1278. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CPQBCM5700 1279. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MEGAIDE 1280. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1281. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CPQBCM5700 1282. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1283. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1284. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CPQE100 1285. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1286. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CPQE100 1287. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#MEGAIDE 1288. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1289. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CPQE100 1290. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AIC7XXX 1291. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1292. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CPQE100 1293. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CCISS 1294. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1295. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CPQE100 1296. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CCISS 1297. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#DL3XXG3 1298. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E1000 1299. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CPQE1000 1300. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CCISS 1301. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#DL3XXG3 1302. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E1000 1303. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CPQE1000 1304. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CCISS 1305. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#DL580G2 1306. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CCISS 1307. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#DL760G2 1308. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CPQTG3 1309. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CCISS 1310. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1311. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CPQE100 1312. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E1000 1313. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CPQE1000 1314. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CPQBCM5700 1315. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#CCISS 1316. http://www.hp.com/products1/servers/serverappliances/ 1317. http://www.linuxdoc.org/HOWTO/Hardware-HOWTO.html 1318. http://www.linuxdoc.org/HOWTO/Ethernet-HOWTO.html 1319. http://www.xfree86.org/4.1.0/index.html 1320. http://www.xfree86.org/cardlist.html 1321. http://www.xig.com/ 1322. http://www.metrolink.com/ 1323. ftp://ftp.llp.fu-berlin.de/pub/linux/LINUX-LAB/IEEE488 1324. http://www.inesinc.com/linux.htm 1325. http://www.xfree86.org/#download 1326. http://www.staikos.on.ca/~staikos/tp1460/XFMa64-Rage-Thinkpad.patch 1327. http://www.0wned.org/XFMa64-Rage-Thinkpad.tar.gz 1328. http://support.ati.com/drivers/ 1329. http://www.elsa.de/EUROPE/PRODUCTS/CAD/SPECS/GLO_SYN.HTM 1330. http://www.sgi.com/software/opengl 1331. http://www.mesa3d.org/ 1332. ftp://download.intel.com/support/graphics/intel815/xfcom_i810-1.2-3.i386.rpm 1333. ftp://download.intel.com/support/graphics/intel810/xfcom_i810-1.2.patch.tar.gz 1334. ftp://download.intel.com/support/graphics/intel815/i810gtt-0.2-4.src.rpm 1335. ftp://download.intel.com/support/graphics/intel810/i810gtt-0.1-6.src.tar.gz 1336. http://www.linux-france.org/article/x/GuideIntel810/book1.html 1337. ftp://download.intel.com/support/graphics/intel815/release_linux.pdf 1338. http://support.intel.com/support/graphics/intel845g/linux.htm 1339. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/395_xf86_1011.tar.gz 1340. ftp://ftp.s3.com/pub/s3/desktop/395/395_xf86_1011.tar.gz 1341. http://www.probo.com/timr/savage40.html 1342. http://www.nvidia.com/view.asp?IO=linux_display_archive 1343. http://www.nvidia.com/view.asp?IO=linux_ia64_display_archive 1344. http://www.medasys-digital-systems.fr/linux/framebuffer.html 1345. http://www.linuxdoc.org/HOWTO/Framebuffer-HOWTO.html 1346. http://people.redhat.com/dledford/aic7xxx_old.html 1347. http://www.adaptec.com/worldwide/support/driversbycat.html?sess=no&language=English+US&cat=%2fOperating+System%2fLinux 1348. http://people.freebsd.org/~gibbs/linux 1349. http://www.adaptec.com/worldwide/support/driversbycat.html?sess=no&language=English+US&cat=%2fOperating+System%2fLinux 1350. ftp://ftp.tux.org/roudier 1351. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/dd62-sym.img 1352. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/dd70-sym.img 1353. ftp://ftp.redhat.com/pub/redhat/linux/updates/6.2/en/os/images/i386/boot-20000407.img 1354. ftp://ftp.scyld.com/pub/network/3c59x.c 1355. http://support.3com.com/infodeli/tools/nic/linuxdownload.htm 1356. ftp://ftp.scyld.com/pub/network/test/3c59x.c 1357. http://www.uow.edu.au/~andrewm/linux/#3c59x-bc 1358. ftp://aiedownload.intel.com/df-support/2896/eng 1359. ftp://aiedownload.intel.com/df-support/2895/eng 1360. http://appsr.intel.com/scripts-df/filter_results.asp?strOSs=39&strTypes=PLU%2CDRV%2CSPH%2CUTL&ProductID=416&OSFullName=Linux*&submit=Go%21 1361. ftp://ftp.suse.com/pub/suse/i386/update/7.2/ 1362. ftp://ftp.compaq.com/pub/products/servers/supportsoftware/linux 1363. ftp://aiedownload.intel.com/df-support/2897/eng 1364. ftp://aiedownload.intel.com/df-support/2895/eng 1365. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1366. ftp://ftp.compaq.com/pub/products/servers/supportsoftware/linux 1367. http://www.scyld.com/expert/wake-on-lan.html 1368. http://www.zabbo.net/maestro3/ 1369. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 1370. http://www.opensound.com/ 1371. http://www.zabbo.net/maestro/ 1372. http://www.student.informatik.tu-darmstadt.de/~tek/projects/linux.html 1373. http://www.hp.com/visualize/support/technotes/linux 1374. http://opensource.creative.com/ 1375. http://www.alsa-project.org/ 1376. http://hp-linux.org/aau/alsa 1377. http://www.uwsg.iu.edu/hypermail/linux/kernel/0110.3/0304.html 1378. http://support.intel.com/support/graphics/linux/audio.htm 1379. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/Biosx2100-JGW102US.rom 1380. http://www.bits.bris.ac.uk/madmatt/laptop.shtml 1381. ftp://ftp.aliusa.com/driver/linux-ide-10b3.tgz 1382. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/ES2839_4Linux2_4_18-2mdk.zip 1383. http://luftstrom.bastun.net/ess-modem-1989.tar.gz 1384. ftp://pcmcia-cs.sourceforge.net/pub/pcmcia-cs/ 1385. http://www.math.u-bordeaux.fr/~depouill/XE3/tulip.tar.gz 1386. http://www.probo.com/timr/savage40.html 1387. http://progs.fleischer.hu/XE3-GF/DSDT/HP_OmniBook_XE3-GF_DSDT.asl 1388. file://localhost/users/bruno/HP-Howto/v0.95/obmouse.sourceforge.net 1389. http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html 1390. http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Linux.Wireless.drivers.html#Prism2 1391. http://www.senecass.com/rob/omnibook6100.html 1392. http://www.nyx.net/~dwiebold/omnibook6100-linux.html 1393. http://www.rag.com.au/linux/6100howto.html 1394. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/dd61-sym.img 1395. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/dd62-sym.img 1396. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/dd70-sym.img 1397. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/dd61-sym.img 1398. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/dd62-sym.img 1399. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/dd70-sym.img 1400. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/dd62-ami.img 1401. ftp://ftp.redhat.com/pub/redhat/linux/updates/6.2/en/os/images/i386/boot-20000407.img 1402. ftp://ftp.kernel.org/pub/linux/kernel 1403. ftp://ftp.compaq.com/pub/products/servers/supportsoftware/linux 1404. http://h18023.www1.hp.com/support/files/server/us/locate/6896.html 1405. ftp://ftp.compaq.com/pub/products/servers/supportsoftware/linux 1406. http://people.redhat.com/dledford 1407. http://sdb.suse.de/en/sdb/html/hmeyer_driver_update.html 1408. http://cvs.mandrakesoft.com/cgi-bin/cvsweb.cgi/~checkout~/gi/mdk-stage1/doc/UPDATEMODULES?rev=1&content-type=text/plain 1409. http://www.ami.com/ 1410. http://www.megaraid.lsilogic.com/ 1411. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/lh3.img 1412. http://www.ami.com/support/prodsearch.cfm?InpProdID=17 1413. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/107.zip 1414. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/1e08.zip 1415. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/mega115.tgz 1416. http://www.jpn.hp.com/software/os/linux/tech/faq/megascan-20020509.tar.gz 1417. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/ami-mr114b.tar.gz 1418. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/dd62-ami.img 1419. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/dd70-ami.img 1420. ftp://ftp.redhat.com/pub/redhat/linux/updates/6.2/en/os/images/i386/boot-20000407.img 1421. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/dd71-ami.img 1422. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/mega115hp.tgz 1423. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/netraid2M.img 1424. http://domsch.com/linux 1425. http://www.adaptec.com/worldwide/support/driversbycat.html?sess=no&language=English+US&cat=%2fOperating+System%2fLinux 1426. ftp://ftp.compaq.com/pub/products/servers/supportsoftware/linux 1427. http://www.compaq.com/support/files/server/us/locate/3331.html 1428. http://starbreeze.knoware.nl/~spark/compaq/ 1429. ftp://ftp.compaq.com/pub/products/servers/supportsoftware/linux 1430. http://www.compaq.com/support/files/server/us/locate/3331.html 1431. http://h18023.www1.hp.com/support/files/server/us/locate/3412.html 1432. http://www.redhat.com/support/errata/partners/compaq/compaq_errata-2.html 1433. http://www.megaraid.lsilogic.com/ 1434. http://www.hp.com/products1/unix/highavailability/ar/mcserviceguard/index.html 1435. http://www.linux-ha.org/ 1436. http://www.uow.edu.au/~andrewm/linux/ext3/ 1437. http://freshmeat.net/projects/hotkeys/ 1438. http://hocwp.free.fr/xbindkeys/xbindkeys.fr.html 1439. http://www.thepuffingroup.com/ 1440. http://www.parisc-linux.org/ 1441. http://www.parisc-linux.org/faq.html 1442. http://www.parisc-linux.org/hw.html 1443. http://mkhppa1.esiee.fr/en/ 1444. http://www.debian.org/ports/hppa/ 1445. http://www.linuxdoc.org/HOWTO/PA-RISC-Linux-Boot-HOWTO/index.html 1446. http://dsportal.eservices.hp.com/dspp/tech/tech_TechDocumentDetailPage_IDX/1,1701,276,00.html 1447. http://www.gr.opengroup.org/mklinux/hppa/mkpa-rel.html 1448. http://parisc.workstations.org/ 1449. ftp://ftp.kernel.org/pub/linux/kernel/ports/ia64 1450. http://www.hp.com/products1/linux/itanium/index.html 1451. http://devresource.hp.com/devresource/Topics/IA64/IA64.html 1452. http://www.hpl.hp.com/techreports/index.html 1453. http://www.linuxia64.org/ 1454. http://www.lia64.org/ 1455. http://www.software.hp.com/ia64linux 1456. ftp://ftp.hpl.hp.com/pub/linux-ia64 1457. http://www.debian.org/ports/ia64/ 1458. http://gluck.debian.org/ia64/ 1459. ftp://gluck.debian.org/ia64/ 1460. http://www.mandrakesoft.com/company/press/pr?n=/pr/products/1444en=en 1461. http://www.lia64.org/book 1462. http://www.redhat.com/software/itanium/ 1463. http://www.mandrakesoft.com/company/press/pr?n=/pr/products/1444en=en 1464. http://www.suse.de/us/business/products/sles/sles_ia64/ 1465. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1466. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1467. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1468. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1469. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1470. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1471. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NRM 1472. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NETRAID 1473. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#XFREE86 1474. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#NVIDIA 1475. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#E100 1476. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#ALSA 1477. ftp://ftp.hpl.hp.com/pub/linux-ia64 1478. http://www.domsch.com/linux 1479. http://www.gnu.org/software/parted 1480. http://www.hp.com/products1/servers/blades/index.html 1481. http://packages.debian.org/unstable/admin/cpcieject.html 1482. http://www.apcc.com/products/management/pcp_linux.cfm 1483. http://hp.apcc.com/ 1484. http://rpmfind.net/ 1485. http://www.cb3rob.net/~sven/xterm 1486. http://www.linuxdoc.org/HOWTO/mini/IP-Alias.html 1487. http://www.samba.org/ 1488. http://www.umich.edu/~rsug/netatalk 1489. http://www.samba.org/ 1490. http://www.samba.org/ 1491. http://www.medasys-digital-systems.fr/linux/samba-truc.html 1492. http://www.cs.wisc.edu/~ghost 1493. http://www.cs.wisc.edu/~ghost/printer.html 1494. http://home.t-online.de/home/Martin.Lottermoser/pcl3.html 1495. http://www.gnu.org/software/hp2xx/ 1496. http://www.linuxprinting.org/printer_list.cgi?make=HP 1497. http://hp.sourceforge.net/ 1498. http://hpinkjet.sourceforge.net/ 1499. http://www.hp.com/united-states/linux/products/printing_imaging/printing_resources.html 1500. http://www.hp.com/cposupport/printers/support_doc/bpd05855.html 1501. http://www.hp.com/cposupport/printers/support_doc/bpl02705.html 1502. http://www.hp.com/united-states/linux/products/printing_imaging/deskjet_printers.html 1503. http://hpinkjet.sourceforge.net/ 1504. http://sourceforge.net/projects/pnm2ppa 1505. http://www.hp.com/united-states/linux/products/printing_imaging/laserjet_printers.html 1506. http://hp.sourceforge.net/ 1507. http://www.mostang.com/sane 1508. http://www.kirchgessner.net/sane.html 1509. http://www.mostang.com/sane 1510. ftp://rvs.ctrl-c.liu.se/pub/wingel/hpscan 1511. http://www.mostang.com/sane 1512. http://www.mostang.com/sane 1513. http://www.mostang.com/sane 1514. http://www.mostang.com/sane 1515. http://www.mostang.com/sane 1516. http://www.mostang.com/sane 1517. http://www.mostang.com/sane 1518. http://www.mostang.com/sane 1519. http://www.mostang.com/sane 1520. http://www.jump.net/~dnelson/linux/usb 1521. http://www.gjaeger.de/scanner/plustek.html 1522. http://scanjet2200c.sourceforge.net/ 1523. http://www.mostang.com/sane 1524. http://www.jump.net/~dnelson/linux/usb 1525. http://www.gjaeger.de/scanner/plustek.html 1526. http://www.jump.net/~dnelson/linux/usb 1527. http://www.torque.net/linux-pp.html 1528. http://www.mostang.com/sane 1529. http://umax1220p.sourceforge.net/ 1530. http://home.kabelfoon.nl/~bertrik/hp3300c/hp3300c.html 1531. http://www.mostang.com/sane 1532. http://www.jump.net/~dnelson/linux/usb 1533. http://sourceforge.net/projects/hp3300backend 1534. http://home.kabelfoon.nl/~bertrik/hp3300c/hp3300c.html 1535. http://www.torque.net/linux-pp.html 1536. http://www.mostang.com/sane 1537. http://www.torque.net/parport/ppscsi.html 1538. http://www.jump.net/~dnelson/linux/usb 1539. http://sourceforge.net/projects/hp3300backend 1540. http://www.qbik.ch/usb/devices/showdev.php?id=23 1541. http://www.mostang.com/sane 1542. http://www.jump.net/~dnelson/linux/usb 1543. http://hp4200-backend.sourceforge.net/ 1544. http://www.mostang.com/sane 1545. http://www.jump.net/~dnelson/linux/usb 1546. http://home.kabelfoon.nl/~bertrik/hp3300c/hp3300c.html 1547. http://www.torque.net/linux-pp.html 1548. http://www.mostang.com/sane 1549. http://www.torque.net/parport/ppscsi.html 1550. http://www.jump.net/~dnelson/linux/usb 1551. http://sourceforge.net/projects/hp3300backend 1552. http://reapoff.sourceforge.net/hpscanner/Default.htm 1553. http://www.torque.net/linux-pp.html 1554. http://www.mostang.com/sane 1555. http://www.torque.net/parport/ppscsi.html 1556. http://www.qbik.ch/usb/devices/showdev.php?id=91 1557. http://www.torque.net/linux-pp.html 1558. http://www.mostang.com/sane 1559. http://www.torque.net/parport/ppscsi.html 1560. http://www.jump.net/~dnelson/linux/usb 1561. http://httpd.chello.nl/~j.schoone/scanning.html 1562. http://www.torque.net/linux-pp.html 1563. http://www.mostang.com/sane 1564. http://www.torque.net/parport/ppscsi.html 1565. http://www.jump.net/~dnelson/linux/usb 1566. http://httpd.chello.nl/~j.schoone/scanning.html 1567. http://www.mostang.com/sane 1568. http://www.qbik.ch/usb/devices/showdev.php?id=89 1569. http://www.mostang.com/sane 1570. http://www.jump.net/~dnelson/linux/usb 1571. http://www.qbik.ch/usb/devices/showdev.php?id=24 1572. http://www.mostang.com/sane 1573. http://www.jump.net/~dnelson/linux/usb 1574. http://httpd.chello.nl/~j.schoone/scanning.html 1575. http://www.hamrick.com/vuescan/vuescan.htm 1576. http://www.mostang.com/sane 1577. http://www.mostang.com/sane 1578. http://www.kirchgessner.net/sanehpfaq.html 1579. http://www.buzzard.org.uk/jonathan/scanners.html 1580. http://www.buzzard.org.uk/jonathan/scanners-usb.html 1581. http://www.qbik.ch/usb/devices/search_res.php3?pattern=hp 1582. http://www.qbik.ch/usb/devices/showdev.php?id=1291 1583. http://www.jump.net/~dnelson/linux/usb 1584. http://www.jump.net/~dnelson/linux/usb 1585. http://www.qbik.ch/usb/devices/showdev.php?id=419 1586. http://www.jump.net/~dnelson/linux/usb 1587. http://www.qbik.ch/usb/devices/showdev.php?id=839 1588. http://www.jump.net/~dnelson/linux/usb 1589. http://www.gphoto.org/ 1590. http://www.linux-knowledge-portal.org/de/content/hardware/hpphotosmart320.html 1591. http://www.jump.net/~dnelson/linux/usb 1592. http://www.jump.net/~dnelson/linux/usb 1593. http://www.gphoto.org/ 1594. http://www.jump.net/~dnelson/linux/usb 1595. http://www.gphoto.org/ 1596. http://www.jump.net/~dnelson/linux/usb 1597. http://www.qbik.ch/usb/devices/showdev.php?id=1326 1598. http://www.jump.net/~dnelson/linux/usb 1599. http://www.gphoto.org/ 1600. http://www.qbik.ch/usb/devices/showdev.php?id=1500 1601. http://www.jump.net/~dnelson/linux/usb 1602. http://www.jump.net/~dnelson/linux/usb 1603. http://www.jump.net/~dnelson/linux/usb 1604. http://www.qbik.ch/usb/devices/showdev.php?id=672 1605. http://www.jump.net/~dnelson/linux/usb 1606. http://www.gphoto.org/ 1607. http://www.jump.net/~dnelson/linux/usb 1608. ftp://ftp.adobe.com/pub/adobe/acrobatreader/unix/4.x/linux-ar-405.tar.gz 1609. http://www.aimnet.com/~derekn/xpdf/ 1610. http://www.libtiff.org/ 1611. http://www.netjunki.org/projects/index.php 1612. http://hpoj.sourceforge.net/suplist.shtml 1613. http://www.linuxtapecert.org/ 1614. http://www.instmath.rwth-aachen.de/~heine/ftape 1615. http://www.torque.net/parport/paride.html 1616. http://mtx.sourceforge.net/ 1617. http://www.arkeia.com/ 1618. http://www.strusel007.de/linux/changer.html 1619. http://www.emulex.com/ts/fc/docs/linuxframe.htm 1620. http://www.qlogic.com/support/os_detail.asp?seriesid=57&osid=26 1621. http://www.hp.com/cposupport/information_storage/support_doc/lpg64111.html 1622. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locale=en_US&prodNum=&seriesId=&lang=English+%28American%29&basePartNum=COL1202&locBasepartNum=co-7366-1-5&prodName=Configuring+the+HP+VA7xxx+with+Command+View+SDM+for+Linux+Red+Hat+7.1&os=&tech=Software+-+Patch 1623. http://opensource.hp.com/opensource_projects.html 1624. http://www.gelato.org/software/index.php 1625. http://www.firehunter.com/ 1626. http://www.hp-eloquence.com/ 1627. ftp://ftp.hp.com/pub/networking/software/hpwebjet_linux.selfx 1628. http://www.hp.com/go/webjetadmin 1629. http://www.hp.com/pond/wja/live/manual/html/wjacomp_linux.html 1630. http://www.HyPer-Linux.org/HP-HOWTO/mirror/Software/hpwebjet-5.6-1.i386.rpm 1631. http://www.hp.com/go/webqos 1632. http://www.hp.com/storage/event/openview_hl.html 1633. http://www.openmail.com/cyc/om/00/showfile.cgi?100-1757 1634. http://www.openmail.com/ 1635. http://www.e-speak.hp.com/ 1636. http://www.unixsolutions.hp.com/products/ha/prod/ar/mcsg.html 1637. http://resourcemanagement.unixsolutions.hp.com/WaRM/schedpolicy.html 1638. http://resourcemanagement.unixsolutions.hp.com/WaRM/prm_linux/index.html 1639. http://hp-linux.org/toptools 1640. http://www.hp.com/toptools/download/server_agents.html 1641. ftp://ftp.cup.hp.com/dist/networking/tools/dummynet/ 1642. ftp://ftp.cup.hp.com/dist/networking/benchmarks/netperf 1643. http://www.hp.com/security/products/linux/ 1644. https://devnet.hp.com/projects/csopen/ 1645. http://www.gris.uni-tuebingen.de/~bartz/kelvin/ 1646. http://www.hp.com/products1/linux/software/scm.html 1647. http://www.bluestone.com/ 1648. http://www.hp.com/communications/opencall/products/ss7/index.html 1649. http://ssic-linux.sourceforge.net/ 1650. http://cooltown.hp.com/cooltownhome/index.asp 1651. http://cooltown.hp.com/dev/reference/coolbase/baseboard/RefPlatform.asp 1652. http://sourceforge.net/projects/prospect 1653. http://www.cygnus.com/ 1654. http://www.arkeia.com/ 1655. http://hpux.cs.utah.edu/ 1656. http://h21007.www2.hp.com/dspp/tech/tech_TechTypeListingPage_IDX/1,1704,10312,00.html 1657. http://devresource.hp.com/LPK/ 1658. http://devresource.hp.com/STKL/index.html 1659. http://sourceforge.net/projects/hpterm/ 1660. ftp://ftp.kde.org/pub/kde/stable/2.1/distribution/tar/hpux/ 1661. http://www.software.hp.com/products/GNOME/ 1662. http://jazz.external.hp.com/src 1663. http://www.aics-research.com/qcterm/ 1664. http://www.hp.com/hps/support/h_linux.htm 1665. http://hp3.m0.net/m/s.asp?H1409133998X725229 1666. http://hp3.m0.net/m/s.asp?H1409133998X725230 1667. http://hp3.m0.net/m/s.asp?H1409133998X725231 1668. http://www.medasys.fr/ 1669. mailto:Sylvain.Berge_at_medasys.fr 1670. http://www.atrid.fr/ 1671. mailto:B.Deschandelliers_at_atrid.fr 1672. http://www.alcove.fr/ 1673. mailto:Lucien.Petit_at_alcove.fr 1674. http://www.andago.es/ 1675. mailto:info_at_andago.com 1676. http://education.hp.com/curr-linux.htm 1677. http://www.france.hp.com/formation/f_linux_00.html 1678. http://www.postfix.org/ 1679. http://www.apache.org/ 1680. http://www.agilent.com/ 1681. http://www.perl.org/ 1682. http://perl.oreilly.com/news/agilent_0300.html 1683. http://squid.nlanr.net/Squid/ 1684. http://www.hpl.hp.com/techreports/1999/HPL-1999-142.html 1685. http://lib.hpl.hp.com/techpubs/2001/HPL-2001-233.html 1686. http://www.linuxia64.org/ 1687. http://www.parisc-linux.org/ 1688. http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html 1689. http://hpinkjet.sourceforge.net/ 1690. http://www.systemimager.org/ 1691. http://rosegarden.external.hp.com/snmp++ 1692. http://people.redhat.com/alikins/system_tuning.html 1693. http://www.openldap.org/ 1694. http://www.hpl.hp.com/techreports/2001/HPL-2001-206.html 1695. http://www.citrix.com/products/metaframe.asp 1696. http://www.citrix.com/ 1697. http://www.openoffice.org/ 1698. http://www.ltsp.org/ 1699. http://plume.sf.net/ 1700. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9134 1701. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9142 1702. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#R2GO 1703. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9163 1704. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9171 1705. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9179 1706. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9186 1707. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9193 1708. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9200 1709. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#AEN9207 1710. http://linuxtoday.com/news_story.php3?ltsn=1999-01-26-015-05-NW-SM 1711. http://www.linux-france.org/article/sys/linux-2.2/Linux-2.2.html 1712. http://linuxtoday.com/news_story.php3?ltsn=2001-01-05-007-04-NW-LF-KN 1713. http://humbolt.geo.uu.nl/Linux-MM/more_than_1GB.shtml 1714. http://www.irisa.fr/prive/mentre/smp-howto 1715. http://www.linux.org/help/beginner/year2000.html 1716. http://www.suse.de/~aj/linux_lfs.html 1717. http://www.amazon.com/ 1718. http://www.zdnetindia.com/techzone/linuxcentre/stories/42345.html 1719. http://www.netage.de/ 1720. http://www.checkpoint.de/ 1721. http://www.sidefx.com/ 1722. http://industryclick.com//magazinearticle.asp?magazinearticleid=122151&magazineid=124&mode=print 1723. http://www.nothingreal.com/ 1724. http://industryclick.com//magazinearticle.asp?magazinearticleid=122151&magazineid=124&mode=print 1725. http://www.boeing.com/ 1726. http://www.hp.com/products1/linux/infolibrary/boeing.html 1727. http://www.viawest.net/ 1728. http://www.hp.com/products1/linux/infolibrary/viawest.html 1729. http://www.iai.co.il/ 1730. http://www.hp.com/products1/linux/infolibrary/israel.html 1731. http://www.speedera.com/ 1732. http://www.hp.com/products1/linux/infolibrary/speedera.html 1733. http://www.dreamworks.com/ 1734. http://www.zdnet.com/zdnn/stories/news/0,4586,2761566,00.html 1735. http://www.cern.ch/ 1736. http://hp-linux.cern.ch/ 1737. http://www.viaccess.fr/ 1738. http://www.HyPer-Linux.org/HP-HOWTO/Docs/Viaccess.pdf 1739. http://www.core.fr/ 1740. http://www.HyPer-Linux.org/HP-HOWTO/Docs/CoreProducts.pdf 1741. http://www.cacr.caltech.edu/ 1742. http://www.HyPer-Linux.org/HP-HOWTO/Docs/Caltech.pdf 1743. http://www.cpd.wm.edu/ 1744. http://www.HyPer-Linux.org/HP-HOWTO/Docs/PiezoelectricDesign_SS.pdf 1745. http://www.HyPer-Linux.org/HP-HOWTO/Docs/CPD_SS_hpVersion_A.pdf 1746. http://www.esiee.fr/ 1747. http://www.HyPer-Linux.org/HP-HOWTO/Docs/ESIEE_GB1.pdf 1748. http://web.mit.edu/sma 1749. http://www.HyPer-Linux.org/HP-HOWTO/Docs/mit_singapore.pdf 1750. http://www.osc.edu/ 1751. http://www.hp.com/hpinfo/newsroom/press/2002/021021d.html 1752. http://www.pnl.gov/ 1753. http://www.HyPer-Linux.org/HP-HOWTO/Docs/PNNL_Cust_Success_f2.pdf 1754. http://www.rice.edu/ 1755. http://www.hp.com/hpinfo/newsroom/press/2002/021119e.html 1756. http://www.sait.samsung.co.kr/ 1757. http://www.HyPer-Linux.org/HP-HOWTO/Docs/SAIT_Itanium-Success-Story.pdf 1758. http://www.tlc2.uh.edu/ 1759. http://www.tlc2.uh.edu/Itanium2.htm 1760. http://www.bp.com/ 1761. http://www.hp.com/hpinfo/newsroom/press/2003/030421a.html 1762. http://www.bund.de/ 1763. http://www.HyPer-Linux.org/HP-HOWTO/Docs/PoliceSaxony.pdf 1764. http://www.inrialpes.fr/ 1765. http://www.HyPer-Linux.org/HP-HOWTO/Docs/Inria2-GB.pdf 1766. http://www.psc.edu/ 1767. http://www.hp.com/hpinfo/newsroom/press/2002/021114c.html 1768. http://www-lns.mit.edu/ 1769. http://www.hp.com/techservers/news/news_hpc_18995.html 1770. http://www.qub.ac.uk/ 1771. http://www.HyPer-Linux.org/HP-HOWTO/Docs/Queens_Success_Story.pdf 1772. http://www.ntnu.no/ 1773. http://www.HyPer-Linux.org/HP-HOWTO/Docs/norway.pdf 1774. http://www.phys.uregina.ca/ 1775. http://www.HyPer-Linux.org/HP-HOWTO/Docs/success_regina.pdf 1776. http://www.cs.sandia.gov/cplant/ 1777. http://www.HyPer-Linux.org/HP-HOWTO/Docs/success_sandia.pdf 1778. http://www.uni-wuppertal.de/ 1779. http://www.hp.com/techservers/basic_research/success_wuppertal.html 1780. http://www.boeing.com/ 1781. http://h30046.www3.hp.com/casestudy.php?topiccode=20020102_Boeing&searchid=0&showpage=&searchtopiccode=LINUXCASESTUDY&pagesite=LINUX®ioncode=&langcode=USENG 1782. news:news.answers 1783. ftp://rtfm.mit.edu/ 1784. news:comp.os.linux.announce 1785. news:comp.sys.hp.hpux 1786. http://www.linuxdoc.org/HOWTO/SCSI-HOWTO.html 1787. http://www.linuxdoc.org/HOWTO/CD-Writing-HOWTO.html 1788. http://www.linuxdoc.org/HOWTO/Hardware-HOWTO.html 1789. http://www.linuxdoc.org/HOWTO/Distribution-HOWTO.html 1790. http://www.linuxdoc.org/HOWTO/Kernel-HOWTO.html 1791. http://www.linuxdoc.org/HOWTO/Sound-HOWTO.html 1792. http://www.linuxdoc.org/HOWTO/PCMCIA-HOWTO.html 1793. http://www.linuxdoc.org/HOWTO/SMP-HOWTO.html 1794. http://www.linux-usb.org/howtos.html 1795. http://tuxmobil.org/howtos.html 1796. http://www.linux-laptop.net/hp.html 1797. http://www.handhelds.org/handhelds-faq/handhelds-faq.html 1798. http://hardware.linuxfaqs.de/view.php?tab=peri&ctype=Scanner 1799. news:comp.sys.hp.hardware 1800. news:comp.sys.hp.misc 1801. file://localhost/users/bruno/HP-Howto/v0.95/HP-HOWTO.html.en#SERVICE 1802. http://www.hp.com/go/linux 1803. http://www.hp-linux.org/ 1804. http://hpwww.ec-lyon.fr/hpeduc/education/offre/linux/educ_linux.html 1805. http://www.hp.com/hps/support/h_linux.htm 1806. http://www.HyPer-Linux.org/HP-HOWTO/current/index.html 1807. http://www.parisc-linux.org/ 1808. http://mkhppa1.esiee.fr/en/ 1809. http://mkhppa1.esiee.fr/parisc-linux-boot/parisc-linux-boot/index.html 1810. http://www.handhelds.org/ 1811. http://mstempin.free.fr/linux-ipaq/ 1812. http://www.cpqlinux.com/acpi-howto.html 1813. http://www.hpl.hp.com/research/linux 1814. http://www.linuxia64.org/ 1815. http://dtf.external.hp.com/dtf/swdev/1999/08/feature1_a.html 1816. http://devnet.hp.com/ 1817. http://hp.sourceforge.net/ 1818. http://www.cpqlinux.com/ 1819. http://bugzilla.redhat.com/certification/cert-report.php3?mod_company=Hewlett+Packard 1820. http://www.linuxcare.com/labs/certs/C1F5.epl 1821. http://www.sap.com/solutions/technology/linux/hp-hw.htm 1822. http://www.hputigroup.com/ 1823. http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ 1824. http://www.linuxdoc.org/ 1825. http://lwn.net/1999/features/1998timeline/ 1826. http://lwn.net/1999/features/Timeline/ 1827. http://lwn.net/2000/features/Timeline/ 1828. http://lwn.net/2001/features/Timeline/ 1829. http://lwn.net/Articles/16858/ 1830. http://www.leb.net/hzo/ioscount/index.html 1831. http://www.linux-france.com/article/these/unix-vs-nt/unix-vs-nt.html 1832. http://www.netcraft.com/survey/ 1833. http://www.aful.org/ 1834. http://www.april.org/ 1835. http://www.linux-center.org/ 1836. http://www.linux-france.com/ 1837. http://www.linuxjournal.com/ 1838. http://www.linuxgazette.com/ 1839. http://www.linuxmag-france.com/ 1840. http://linuxstart.com/index.html 1841. http://linuxfr.org/news/ 1842. http://www.redhat.com/cgi-bin/support 1843. http://www.redhat.com/support/resources/gotchas/6.2/gotchas-6.2.html 1844. http://www.redhat.com/support/resources/gotchas/7.1/gotchas-71.html 1845. http://www.linux-mandrake.com/fr/hardware.php3?F_FAMILY=all&F_MANUFACTURER=HP&F_STATUS=all&F_SEARCH=TRUE 1846. http://tuxmobil.org/ 1847. http://www.linux-on-laptops.com/ 1848. http://linux-wlan.org/ 1849. http://linmodems.org/ 1850. http://www.linux-notebook.org/laptops/ 1851. http://www.teaser.fr/~hfiguiere/linux/digicam.html 1852. http://www.linuxmama.com/dev-server.html 1853. http://sverre.home.cern.ch/sverre/SJ.html 1854. http://developer.intel.com/design/itanium/index.htm 1855. http://www.medasys-digital-systems.fr/linux 1856. mailto:markus.amersdorfer_at_aon.at 1857. mailto:angelini_at_ifsic.univ-rennes1.fr 1858. mailto:Emmanuel.Avrillon_at_hp.com 1859. mailto:Khalid_Aziz_at_hp.com 1860. mailto:Sarah_Barclay_at_hp.com 1861. mailto:bhat_at_trinity.unimelb.edu.au 1862. mailto:j.ten.berge_at_getexo.nl 1863. mailto:Sylvain.Berge_at_medasys-digital-systems.fr 1864. mailto:richard.black_at_hp.com 1865. mailto:nancy_at_blachman.org 1866. mailto:boffi_at_dimat.unipv.it 1867. mailto:bortzmeyer_at_debian.org 1868. mailto:bburns_at_wso.williams.edu 1869. mailto:larry_butler_at_hp.com 1870. mailto:sylvan.butler_at_hp.com.invalid 1871. mailto:emmanuel_carras_at_hp.com 1872. mailto:kevin_carson_at_hp.com 1873. mailto:dalgoda_at_ix.netcom.com 1874. mailto:Jean-Bernard_Chaffardon_at_hp.com 1875. mailto:chawoshi_at_subatech.in2p3.fr 1876. mailto:beatrice_at_victoria.frmug.org 1877. mailto:mcorral_at_mediaone.net 1878. mailto:sebastien.cottalorda_at_mageos.com 1879. mailto:rocky_at_fc.hp.com 1880. mailto:nug_at_sch.bme.hu 1881. mailto:Mary.Deck_at_hp.com 1882. mailto:Philippe.Depouilly_at_math.u-bordeaux.fr 1883. http://www.math.u-bordeaux.fr/~depouill 1884. mailto:ludovic_didierlaurent_at_hp.com 1885. mailto:ydirson_at_fr.alcove.com 1886. mailto:F.Dubuy_at_atrid.fr 1887. mailto:dominique.dumont_at_hp.com 1888. mailto:mdwyer_at_alumbre-tech.com 1889. mailto:Stephane_Eranian_at_hp.com 1890. mailto:Mark_Eve_at_hp.com 1891. mailto:gferg_at_hoop.timonium.sgi.com 1892. mailto:omnibook_at_exodus.fleischer.hu 1893. mailto:cfrank_at_grc.hp.com 1894. mailto:dannf_at_fc.hp.com 1895. mailto:laurent.frey_at_iota.u-psud.fr 1896. mailto:Bertrand.Gambier_at_medasys-digital-systems.fr 1897. mailto:Bdale_Garbee_at_hp.com 1898. mailto:Wilson_Gardiner_at_hp.com 1899. mailto:stein.roar.gjoen_at_ks-t.no 1900. mailto:glg_at_grebus.com 1901. mailto:grundler_at_cup.hp.com 1902. mailto:jno_at_sasi.fr 1903. mailto:Yann_Guillemot_at_hp.com 1904. mailto:christof.haentschke_at_hp.com 1905. mailto:cph_at_zurich.ai.mit.edu 1906. mailto:jlh_at_trinidad.cv.hp.com 1907. mailto:wehe_at_snafu.de 1908. mailto:Marc_Hia-Balie_at_hp.com 1909. mailto:Markus.Herber_at_hp.com 1910. mailto:theme_at_montana.com 1911. mailto:chris.holden_at_gte.net 1912. mailto:keith_hopkins_at_hp.com 1913. mailto:Masanari_Iida_at_hp.com 1914. mailto:Brett_Johnson_at_hp.com 1915. mailto:martin_at_martinshouse.com 1916. mailto:timothy.jones_at_hp.com 1917. mailto:arno_keller_at_hp.com 1918. mailto:rainer.kiehne_at_tu-clausthal.de 1919. mailto:Bruce_Kives_at_hp.com 1920. mailto:bernhard_kappler_at_hp.com 1921. mailto:Markus.Kuhn_at_cl.cam.ac.uk 1922. mailto:claude.labroille_at_wanadoo.fr 1923. mailto:raiger_at_hemna.rose.hp.com 1924. mailto:Pascal.Lemonnier_at_medasys.fr 1925. mailto:flepied_at_mandrakesoft.com 1926. mailto:qliu_at_club-internet.fr 1927. mailto:Fabrice.Lorrain_at_univ-mlv.fr 1928. mailto:Maciej.Macowicz_at_epfl.ch 1929. mailto:a-m.mahfouf_at_lineone.net 1930. mailto:Olivier_Martinet_at_hp.com 1931. mailto:madmatt_at_bits.bris.ac.uk 1932. http://www.bits.bris.ac.uk/madmatt/laptop.shtml 1933. mailto:Lee_Mayes_at_hp.com 1934. mailto:mccluskey_at_nospam.mail.utexas.edu 1935. mailto:David.Mentre_at_irisa.fr 1936. mailto:Jacques.Misselis_at_hp.com 1937. mailto:j.mollier_at_actinux.com 1938. mailto:lars.nakkerud_at_hp.com 1939. mailto:520047054719-0001_at_t-online.de 1940. mailto:A.Nierula_at_t-online.de 1941. mailto:robert_niland_at_hp.com 1942. mailto:Gilles_Noisette_at_hp.com 1943. mailto:HARRY_PAGE_at_HP-NewZealand-om1.om.hp.com 1944. mailto:Luis_Pais_at_hp.com 1945. mailto:pascal_at_montrouge.omnes.slb.com 1946. mailto:paschal_at_rcsis.com 1947. mailto:tomarep_at_online.no 1948. mailto:Luis_Peromarta_at_hp.com 1949. mailto:sp_at_osb.hu 1950. mailto:nicolas.pettiaux_at_openbe.org 1951. mailto:Daryl_Poe_at_hp.com 1952. mailto:Thomas.Pornin_at_ens.fr 1953. mailto:karthik_prabhakar_at_hp.com 1954. mailto:Fons.Rademakers_at_cern.ch 1955. http://hp-linux.cern.ch/ 1956. mailto:Ram.Rao_at_hp.com 1957. mailto:Gallig_Renaud_at_hp.com 1958. mailto:Valerie_Rice_at_hp.com 1959. mailto:riches_at_ms.washington.edu 1960. mailto:laner_at_teleport.com 1961. mailto:reception_at_geo.co.za 1962. mailto:Eric_Rueda_at_hp.com 1963. mailto:rob_at_welcomehome.org 1964. mailto:Schutte_at_fel.tno.nl 1965. mailto:t.simonnet_at_esiee.fr 1966. mailto:charles_slivkoff_at_hp.com 1967. mailto:junichi_shimoda_at_hp.com 1968. mailto:Jeff.Spray_at_zf.com 1969. mailto:support_at_ami.com 1970. mailto:rstanchak_at_yahoo.com 1971. mailto:dean.stevenson_at_hp.com 1972. mailto:skhader_at_hp.com 1973. mailto:olivier.tharan_at_idealx.com 1974. mailto:Nicolas_Thomas_at_hp.com 1975. mailto:Venkatesh.Pallipadi_at_intel.com 1976. mailto:Jimmy.Vance_at_hp.com 1977. mailto:Nathalie.Viollet_at_hp.com 1978. mailto:hvk_at_hp.se 1979. mailto:Dirk.DeWachter_at_rug.ac.be 1980. mailto:ndw_at_nwalsh.com 1981. mailto:rwira_at_mandrakesoft.com 1982. mailto:Hans.Witvliet_at_Alcatel.nl 1983. mailto:tony_at_ycs.com.au 1984. mailto:Yuthay.Yean_at_medasys.fr 1985. mailto:yumoto_at_jpn.hp.com 1986. http://www.gnu.org/copyleft/