HP HOWTO Guide d'utilisation et de configuration des produits HP sous Linux (Version 0.93) Bruno Cornec Hewlett Packard Bruno@HyPer-Linux.org Copyright © 1997-2001 par Bruno Cornec Ce document décrit l'utilisation des produits au catalogue [1]Hewlett-Packard (HP) avec Linux et certains logiciels libres. Il indique les matériels pris en charge, les logiciels à utiliser, répond à certaines questions fréquemment posées et donne des éléments de dimensionnement. Les buts sont d'offrir une vue d'ensemble des fonctionnalités des logiciels libres et de leur utilisation au mieux avec des produits HP ; ainsi que de rendre les nouveaux utilisateurs de produits HP rapidement opérationnels et également de permettre aux autres de choisir le leur en toute connaissance de cause. Licence Ce HOWTO est une documentation libre de par la volonté de [2]Medasys et [3]Hewlett-Packard pour qui j'effectue ce travail ; vous pouvez la copier; redistribuer et/ou la modifier en conformité avec les termes de la [4]Licence de Libre Diffusion des Documents GNU, version 1.1 . ou n'importe quelle version ultérieure publiée par la Free Software Foundation ; sans section invariante, ni aucune couverture. Ce document est distribué dans l'espoir qu'il sera utile, mais sans aucune garantie ; notamment, vous êtes entièrement responsable de son utilisation et ne pourriez vous plaindre en cas de dysfonctionnement, voire d'endommagement de votre matériel. Tous les logiciels compris ici, s'ils ne sont pas déjà munis d'un copyright, sont placés sous GPL. _________________________________________________________________ Table des matières 1. [5]Introduction 1.1. [6]Présentation 1.1.1. [7]Nouvelles versions de ce document 1.1.2. [8]Suggestions 1.2. [9]Remerciements 2. [10]Présentation de Linux et des logiciels libres 2.1. [11]Quelques définitions 2.1.1. [12]Logiciel libre 2.1.2. [13]Exemples et contre-exemples 2.1.3. [14]Linux 2.2. [15]Les concepts du logiciel libre 2.2.1. [16]La philosophie du logiciel libre 2.2.2. [17]Le choix du logiciel libre 2.2.3. [18]Idées fausses sur le logiciel libre 2.2.4. [19]Les vrais problèmes autour du logiciel libre 2.3. [20]Linux et les autres systèmes d'exploitation 2.3.1. [21]Linux et les Unix propriétaires (HP-UX, Tru64, AIX, Solaris, Irix) 2.3.2. [22]Linux et SCO 2.3.3. [23]Linux et Windows NT 3. [24]Linux et les produits HP 3.1. [25]Informations sur les produits HP et Linux 3.1.1. [26]Informations générales 3.1.2. [27]Annonces particulières 3.2. [28]Les matériels HP pris en charge par Linux 3.2.1. [29]La gamme informatique basée sur des processeurs Intel 3.2.2. [30]La gamme des moniteurs HP 3.2.3. [31]La gamme informatique basée sur des processeurs PA-Risc 3.2.4. [32]La gamme IA-64 3.2.5. [33]La gamme informatique des terminaux X 3.2.6. [34]La gamme des produits d'impression 3.2.7. [35]La gamme des tout en un 3.2.8. [36]La gamme des produits de numérisation 3.2.9. [37]La gamme des produits de stockage 3.3. [38]Logiciels HP et logiciels libres 3.3.1. [39]Les logiciels HP sous Linux 3.3.2. [40]Les logiciels en partenariat avec HP pour Linux 3.3.3. [41]Les logiciels libres sous HP-UX 3.3.4. [42]Les logiciels libres sous MPE/IX 3.4. [43]Le support des solutions HP sous Linux 3.5. [44]La formation aux solutions HP sous Linux 3.6. [45]HP comme utilisateur et contributeur de logiciels libres 4. [46]Solutions et Dimensionnement 4.1. [47]Linux comme serveur de fichiers et d'impression 4.1.1. [48]Linux comme serveur de fichiers 4.1.2. [49]Linux comme serveur d'impression 4.2. [50]Linux comme serveur Internet/Intranet 4.2.1. [51]Serveur Web 4.2.2. [52]Serveur de courrier électronique 4.2.3. [53]Serveur Pare-Feu / Mandataire / Cache Web 4.2.4. [54]Serveur Annuaire 4.3. [55]Linux comme serveur de calcul 4.4. [56]Linux comme serveur bureautique 5. [57]Foire Aux Questions (FAQ) 6. [58]Références 7. [59]Contributeurs 8. [60]Versions ultérieures A. [61]GNU Free Documentation License 0. [62]PREAMBLE 1. [63]APPLICABILITY AND DEFINITIONS 2. [64]VERBATIM COPYING 3. [65]COPYING IN QUANTITY 4. [66]MODIFICATIONS 5. [67]COMBINING DOCUMENTS 6. [68]COLLECTIONS OF DOCUMENTS 7. [69]AGGREGATION WITH INDEPENDENT WORKS 8. [70]TRANSLATION 9. [71]TERMINATION 10. [72]FUTURE REVISIONS OF THIS LICENSE [73]How to use this License for your documents Liste des tableaux 2-1. [74]Les performances des logiciels libres 3-1. [75]Brio et Linux 3-2. [76]Vectra et Linux 3-3. [77]e-PC et Linux 3-4. [78]Kayak et Linux 3-5. [79]Visualize et Linux 3-6. [80]Les accessoires des machines de bureau 3-7. [81]OmniBook et Linux 3-8. [82]Les accessoires des portables 3-9. [83]NetServers et Linux 3-10. [84]Appliance Servers et Linux 3-11. [85]Les accessoires des NetServers 3-12. [86]Moniteurs HP et Linux 3-13. [87]HP IA-64 Servers et Linux 3-14. [88]Codes de Contrôle des imprimantes 3-15. [89]Scanners et Linux 4-1. [90]Dimensionnement d'un serveur de fichiers 4-2. [91]Dimensionnement d'un serveur d'impression 4-3. [92]Dimensionnement d'un serveur Web statique 4-4. [93]Dimensionnement d'un serveur Web dynamique 4-5. [94]Dimensionnement d'un serveur de courrier électronique 4-6. [95]Dimensionnement d'un serveur Pare-Feu/Mandataire/Cache Web 4-7. [96]Dimensionnement d'un serveur LDAP 4-8. [97]Dimensionnement d'un serveur de bureautique 6-1. [98]Les sites Web de HP 6-2. [99]D'autres sites de base sur Linux et les Logiciels Libres Liste des illustrations 2-1. [100]Répartition des systèmes d'exploitation serveur en 1998 (IDC). 2-2. [101]Répartition des systèmes d'exploitation serveur en 1999 (IDC). 2-3. [102]Logiciels serveur Web selon Netcraft entre 1995 et 2000. 2-4. [103]Répartition des serveurs Internet selon l'IOS Counter en Avril 1999. _________________________________________________________________ Chapitre 1. Introduction 1.1. Présentation Ce document est un guide sur l'utilisation des produits proposés par le constructeur informatique [104]Hewlett-Packard (HP) sous Linux. Il est conçu comme un guide de référence rapide, couvrant tout ce que vous avez besoin de savoir pour dimensionner, installer et configurer vos produits sous Linux, ou quels logiciels complémentaires seront utiles à cet effet. Les questions fréquemment posées y trouvent des réponses, et des références sont données concernant d'autres sources d'informations relatives à la technologie et aux applications liées à HP. Les opinions exprimées ici sont celles de leur auteur et n'engagent en rien les sociétés [105]Medasys ou [106]Hewlett-Packard . Les informations sont fournies dans le but d'être utiles aux lecteurs. Néanmoins, il ne peut y avoir, au travers de ce document, aucun engagement de fonctionnement de la part de [107]Medasys ou [108]Hewlett-Packard sur ces systèmes sous Linux, pas plus que de la part de l'auteur. Ni [109]Medasys , ni [110]Hewlett-Packard , ni l'auteur ne peuvent être tenus pour responsable d'aucun dysfonctionnement provenant de l'utilisation de ces informations. Néanmoins, les éditeurs de logiciels ne vous garantissent pas grand chose non plus (relisez les contrats). _________________________________________________________________ 1.1.1. Nouvelles versions de ce document Les nouvelles versions de ce document seront annoncées périodiquement dans les forums Usenet [111]news:fr.comp.os.linux.annonces et [112]news:comp.os.linux.annonces. Elles seront également mises à jour sur les divers sites ftp anonymes qui archivent de telles informations, notamment [113]http://www.freenix.org/unix/linux/HOWTO. Des versions hypertextuelles de ce HOWTO ainsi que des autres HOWTO sont disponibles sur de nombreux sites de la toile (World Wide Web), y compris [114]http://metalab.unc.edu/LDP/HOWTO et [115]http://www.freenix.org/unix/linux/HOWTO. La plupart des distributions Linux sur CD-ROM comprend les HOWTO, souvent sous le répertoire /usr/doc, et vous pouvez aussi en acheter des exemplaires imprimés chez de nombreux vendeurs. Quelques fois, les HOWTO disponibles par l'intermédiaire des vendeurs de CD-ROM, des sites ftp ou sous forme imprimée sont périmés. Si ce HOWTO date de plus de six mois, alors une nouvelle copie est probablement disponible sur l'Internet. Le site de référence pour ce HOWTO est [116]http://www.HyPer-Linux.org/HP-Howto/HP-HOWTO-FR Si vous faites une traduction de ce document dans d'autres langues, faites-le moi savoir pour que j'inclus une référence ici. _________________________________________________________________ 1.1.2. Suggestions Je me repose sur vous, lecteurs, pour rendre ce HOWTO utile. Si vous avez des suggestions, des corrections, des commentaires, voire des compliments :-) n'hésitez pas à me les envoyer <[117]Bruno@HyPer-Linux.org>, et j'essaierai de les incorporer dans une prochaine révision. Je souhaite aussi répondre aux questions générales sur les matériels et logiciels HP sous Linux, du mieux possible. Avant de les poser, lisez s'il vous plaît toutes les informations de ce HOWTO, et ensuite envoyez-moi un rapport détaillé de votre problème. Si vous publiez ce document sur un CD-ROM ou sous forme papier, une copie de remerciement serait appréciée ; envoyez-moi un courrier électronique pour obtenir mon adresse postale. Considérez également l'opportunité de faire une donation au Projet Linux de Documentation pour encourager la documentation libre autour de Linux. Pour plus d'informations, contactez le coordinateur des HOWTO Linux, Guylhem AZNAR <[118]guylhem@rrremovethis.oeil.qc.ca>. _________________________________________________________________ 1.2. Remerciements La plupart des informations contenues ici proviennent de recherches effectuées dans la documentation proposée par HP, de fichiers fournis avec le code source du noyau Linux, de la FAQ du forum Usenet [119]news:comp.sys.hp.hpux dont [120]une version HTML est disponible sur les miroirs tels que le CICT, de mon expérience personnelle sur les matériels HP, de nombreux tests et déploiements réalisés et de remarques d'utilisateurs de Linux. De nombreux contributeurs ont permis à ce document de se parfaire. Vous en trouverez une liste la plus exhaustive possible dans le [121]Chapitre 7. J'aimerais tout de suite remercier, sans ordre particulier, ceux sans qui ce document n'existerait tout simplement pas : * Marc Hia Balié <[122]Marc_Hia-Balie@hp.com>, qui a commandité ce document et a autorisé sa diffusion comme documentation libre. * [123]Linus Torvalds, pour le projet Linux sans qui rien ne serait. * [124]Richard Stallman, pour le projet GNU sans qui rien ne serait non plus. * Nat Makarévitch <[125]nat@nataa.frmug.org>, pour son travail de traducteur et ses conférences prosélytes. * Xavier Cazin <[126]xc@itp.fr>, pour son talent à me convaincre d'utiliser DocBook. * Eric Dumas <[127]dumas@Linux.EU.Org>, pour la gestion du projet de documentation en français. * Rémy Card <[128]Remy.Card@linux.org>, pour ext2 et son amour de l'électricité :-). * René Cougnenc, pour avoir mis le pied à l'étrier de beaucoup de monde, dont moi. * Dany Coffineau <[129]Dany.Coffineau@alcatel.fr>, pour m'avoir tout appris sur Unix. * François Strobel <[130]Francois.Strobel@alcatel.fr>, pour son calme et sa patience légendaires :-) * Frédéric Dubuy <[131]F.Dubuy@atrid.fr>, qui a contribué à l'écriture de ce document et s'est occupé de tout ce que je ne pouvais pas faire, lorsque je le rédigeais. Sans compter qu'il est aussi le graphiste du logo ! * Alain Pascal <[132]pascal@montrouge.omnes.slb.com>, pour les nombreux tests effectués. * Pascal Lemonnier <[133]Pascal.Lemonnier@medasys.fr> expert en typographie et qui ne rate aucune faute d'orthographe :-) * Ralf S. Engelschall <[134]rse@engelschall.com>, pour la mise à disposition des outils [135]wml , utilisés pour gérer le bilinguisme de ce document. * Cees de Groot <[136]cg@sgmltools.org>, pour la mise à disposition des outils [137]SGMLTools utilsé lors de la génération de la première version de ce document. * Norman Walsh <[138]ndw@nwalsh.com>, pour la mise à disposition de la DTD SGML [139]DocBook. qui permet de générer toutes les versions de ce document à partir d'un même source SGML. * James Clark <[140]jjc@jclark.com>, pour la mise à disposition de l'outil [141]Jade. * La famille Cornec <[142]cornec@victoria.frmug.org>, pour sa patience et son soutien. _________________________________________________________________ Chapitre 2. Présentation de Linux et des logiciels libres 2.1. Quelques définitions Avant de rentrer plus en détails dans la présentation, il peut être utile de donner quelques définitions des termes et des logiciels mentionnés dans ce document. _________________________________________________________________ 2.1.1. Logiciel libre Un logiciel libre est un logiciel diffusé avec son code source, ce qui en permet l'étude, la transmission, l'adaptation. Suivant les licences utilisées pour le développement du logiciel, les contraintes sont diverses pour les utilisateurs. Les licences les plus ouvertes (telles que la licence Berkeley Software Distribution ou BSD) autorisent l'appropriation du code par un tiers, y compris sa vente (après modification ou non) dans des produits commerciaux, sans aucun problème et sans rien devoir d'autre aux auteurs initiaux que la présence de leur copyright. D'autres licences (telles que la GNU Public License ou GPL) obligent toute modification d'un logiciel libre GPL à être lui-même libre ; ceci ne permet pas l'utilisation de tels programmes dans un produit commercial. De nombreuses autres licences de distribution existent, plus ou moins libres: la licence Artistique (perl), la NPL (mozilla), la QPL (Qt) ... Une grande majorité des programmes libres est aujourd'hui placée sous licence GPL, même si le monde BSD occupe toujours une place importante, quoique moins visible, notamment dans la presse. Linux est placé sous GPL. Pour plus d'informations sur ces définitions et les licences, on se reportera aux sites de référence suivants : [143]Le site Web du projet GNU On y trouve toutes les informations relatives au projet GNU, y compris les licences produites (GPL et LGPL) et diverses discussions sur le logiciel libre. [144]Le site Web du projet Open Source Ce site propose une nouvelle définition, un peu moins restrictive, des logiciels libres, de la part de diverses personnalités en vue. [145]Le site Web du projet FreeBSD Ici, ce sont les avantages de la très ouverte licence BSD qui sont expliqués. _________________________________________________________________ 2.1.2. Exemples et contre-exemples Tout d'abord, il ne faut pas confondre logiciel libre et graticiel (freeware). Un graticiel n'est pas nécessairement un logiciel fourni avec ses sources, à la différence du logiciel libre. De même, à la différence du graticiel, obtenir un logiciel libre peut être un service payant (ce n'est pas contradictoire avec les licences utilisées). L'ambiguïté vient du terme anglais " free" qui signifie à la fois libre et gratuit. Un graticiel est donc gratuit mais pas obligatoirement libre. (De même, le partagiciel (shareware) n'est en rien un logiciel libre). Ainsi, des exemples de logiciels libres importants et connus sont les systèmes d'exploitation Linux et FreeBSD, le serveur Web [146]Apache , le serveur SMB [147]SaMBa , les compilateurs GNU C, et GNU C++ ... A contrario, des exemples de graticiels connus sont le navigateur Internet Explorer, l'outil de lecture de courrier électronique Eudora Light, ... _________________________________________________________________ 2.1.3. Linux Linux est un système d'exploitation libre, réalisant un sur-ensemble de la norme POSIX. Initialement, le terme " Linux" désigne uniquement le noyau. Par extension, on donne également ce nom aux distributions basées sur ce noyau et un ensemble d'outils du projet GNU. Linux est donc un système Unix, si ce n'est qu'il n'utilise aucun code propriétaire et est fourni sous licence GPL, ce qui implique la disponibilité des sources. Comme tout autre système Unix, il est multi-tâches, multi-utilisateurs. Il est également extrêmement portable, puisqu'il est aujourd'hui disponible officiellement sur des processeurs Intel (i386 à Pentium III), Alpha, Motorola (680x0 et PowerPC), Sparc, StrongArm, Mips. Sans compter les portages opérationnels ou en cours sur PalmPilot, Itanium (ex-Merced), PA-Risc, Crusoe ... Le système est aujourd'hui parfaitement stable et mature. Les versions "x.y.z" du noyau Linux, où "y" est un nombre pair, sont stables et seules des corrections d'anomalies y sont en général appliquées lors de l'incrément de "z". Les versions "x.y.z" du noyau Linux, où "y" est un nombre impair, sont des versions de développement qui peuvent être instables et sont réservées aux développeurs ou aux intrépides. De temps en temps, quand le développement du noyau se stabilise un "gel" intervient pour fournir une nouvelle version "stable" (paire), et le développement continue sur une nouvelle version (impaire). La version stable actuelle est la version 2.4.3 (ce dernier indice étant susceptible d'évoluer au fur et à mesure des corrections). Le développement a d'autre part déjà repris avec une série 2.4test en cours. De nombreuses présentations de Linux sont disponibles actuellement. Parmi celles-ci, vous aurez avantage à consulter celle de Nat Makarévitch et de Michael Johnson aux adresses [148]http://www.linux-france.com/article/presentation/presentation.htm l et [149]ftp://ftp.lip6.fr/pub/linux/french/ldp/info-sheet.fr.html. _________________________________________________________________ 2.1.3.1. Caractéristiques techniques de Linux Le système dispose des caractéristiques techniques suivantes : * Multi-tâches : exécute plusieurs programmes en pseudo-parallélisme. * Multi-utilisateurs : plusieurs utilisateurs actifs sur la même machine en même temps (sans souci de licence). * Portable et interopérable : fonctionne sur de nombreuses architectures matérielles. Tous les sources sont disponibles. Linux prend en charge de nombreux systèmes de fichiers outre le natif ext2fs : System V, BSD, Sun, MS-DOS, VFAT, NTFS, Mac, HPFS, EFS, ISO9660. Côté réseau, il y a prise en charge des protocoles TCP/IP v4 et v6, Appletalk, Netware (client et serveur), Lan Manager SMB (client et serveur), X-Window, NFS, PPP, SLIP, UUCP. * Architecture performante : noyau modulaire et recompilable à volonté, exécution en mode protégé sur les processeurs 80x86, chargement de pages à la demande, partage de pages entre exécutables en lecture, mémoire virtuelle avec pagination sur disque, utilisation d'un cache disque en mémoire géré dynamiquement, bibliothèques dynamiques, gestion de processus, pseudo-terminaux, consoles virtuelles. * Sécurité : protection de la mémoire entre processus: un programme utilisateur ne peut compromettre le fonctionnement du système dans son ensemble. Le noyau peut assurer, d'autre part, le filtrage de trames réseau. * Conforme aux normes et standards : Posix, avec les extensions Système V et BSD. Prise en charge des binaires COFF et ELF. Compatibilité binaire avec SCO, SVR3/4 par le module iBCS2. Prise en charge des spécificités nationales (NLS, clavier, polices, ...). _________________________________________________________________ 2.2. Les concepts du logiciel libre Une fois les définitions établies, il est important de s'attarder sur les idées véhiculées par le mouvement du logiciel libre. De même qu'il est important d'évacuer un certain nombre d'idées fausses colportées sur ces logiciels. Cette section donne ensuite un argumentaire varié en faveur de l'introduction des logiciels libres et conclut sur des problèmes réels restant à surmonter. _________________________________________________________________ 2.2.1. La philosophie du logiciel libre En fait la philosophie véhiculée par le mouvement du logiciel libre n'est guère différente de celle proposée par tout le mouvement scientifique depuis de nombreuses années : la mise en commun des idées et du savoir collectif pour permettre la progression de la recherche et l'augmentation de ce savoir. La connaissance du génome humain est l'un de ces exemples de travail collaboratif. Le milieu informatique, et particulièrement celui du logiciel, semble s'être détourné depuis près de 20 ans de ces préceptes de base du monde scientifique. Il privilégie au contraire la captation du client au détriment de la fourniture des informations qui lui permettraient d'exploiter au mieux son environnement informatique. C'est du reste à la suite d'un tel problème, au début des années 80, que Richard Stallman, alors chercheur en intelligence artificielle au MIT, a décidé de fonder le projet GNU. Ce projet est le fondement du mouvement du logiciel libre actuel. Les idées principales soutenues par ce mouvement et énoncées par Richard Stallman lui-même sont : * Liberté : tout utilisateur doit être libre de copier, diffuser, modifier un programme, soit pour le partager avec d'autres, soit pour l'adapter à son besoin propre. De même, il doit pouvoir l'analyser pour le comprendre, l'imiter, l'améliorer, vérifier son fonctionnement, de même que tout résultat scientifique est soumis à l'aune de ses pairs pour vérification, étude, compréhension et réalisation de travaux dérivés. Peut-on imaginer un vaccin contre le cancer du foie qu'un autre laboratoire ne pourrait dériver pour en faire un vaccin contre le cancer du pancréas ? * Égalité : toute personne doit avoir les mêmes droits sur le logiciel. Le fournisseur n'est ainsi pas privilégié et ne peut capturer les clients auxquels il fournit son travail. Peut-on imaginer que seul le producteur dudit vaccin ait le droit de s'en servir ? * Fraternité : ce mode de fonctionnement encourage toute la communauté informatique à coopérer et à produire ainsi des logiciels de plus en plus fiables et utiles à tous. Peut-on imaginer qu'une découverte comme le vaccin ci-dessus ne puisse servir à tous et favoriser d'autres découvertes ? Au delà de l'aspect utopique de ces idées se trouvent d'autres raisons qui ont permis aux logiciels libres de se répandre si largement aujourd'hui. Elles sont détaillées dans [150]Section 2.2.2. Le mouvement du logiciel libre se concrétise aussi au travers d'une communauté de personnes. Réunion informelle de personnalités, cette communauté est hétérogène dans sa composition, ses actions, ses idées, même si tous partagent la même croyance dans la liberté du logiciel. Cette communauté s'est forgé les outils nécessaires à sa communication que sont l'Internet et Usenet. Et ces outils de communications utilisent bien évidemment force logiciels libres pour fonctionner. Parmi les personnages marquants du mouvement, on peut citer : * [151]Linus Torvalds, à l'origine de Linux. * [152]Richard Stallman, à l'origine du projet GNU. * [153]Eric S. Raymond, auteur de nombreux et excellents articles, qui inspirent tant de vocations. * [154]Larry Wall, auteur de Perl et de l'outil patch, et philosophe. * Tim O'Reilly <[155]ask_tim@oreilly.com>, promoteur du logiciel libre et éditeur de nombreux ouvrages qui leur sont consacrés. Toutes ces personnalités sont avant tout d'excellents informaticiens, ce qui leur permet d'être reconnus comme des acteurs majeurs du mouvement du logiciel libre. Leurs qualités humaines et communicatives sont également des caractéristiques fortes de leur tempérament. En aucun cas, ils ne sont considérés pour leur pouvoir, mais au contraire pour leur savoir. Bien évidemment, la communauté du logiciel libre est constituée de milliers de programmeurs, dont il serait fastidieux d'énumérer la liste. Tous ont en commun la volonté de produire une oeuvre utile, libre, et d'être reconnus pour leurs qualités techniques avant tout. _________________________________________________________________ 2.2.2. Le choix du logiciel libre Utiliser des logiciels libres pour apporter des solutions informatiques relève du choix. Tout d'abord, cela favorise la pluralité de solutions, notamment dans un milieu micro-informatique à tendance monopolistique. Ensuite, le choix porte, car cela est finalement le plus essentiel, sur les qualités intrinsèques du logiciel libre, qui sont détaillées juste après. L'accès aux sources Ce point est l'élément primordial du choix, puisqu'il permet la compréhension, l'adaptation, la correction, la diffusion, la fiabilisation du logiciel. De plus, cela contribue à diminuer énormément la possibilité de véhiculer des virus. La fiabilité Cette qualité résulte de la précédente: le logiciel libre est le résultat cumulé de l'expérience et de l'intelligence de tous les intervenants. Sa fiabilité augmente donc avec le temps, au fur et à mesure des corrections qui sont effectuées. De plus aucune pression marketing n'oblige le producteur du logiciel à le livrer à ses clients avant qu'il ne soit dans un état jugé satisfaisant. La portabilité Cette qualité n'est pas propre au logiciel libre, mais est très souvent présente dans un logiciel libre. En effet, si ce logiciel connaît du succès, il sera obligatoirement adapté à d'autres environnements que ceux initialement prévus. Ainsi, en augmentant sa disponibilité, on améliore sa portabilité et sa fiabilité également. L'universalité Une qualité essentielle des logiciels libres est le caractère par nature universel des formats de données utilisés. Même s'ils ne suivent pas les standards, la disponibilité du code source assure à l'utilisateur la compréhension de ceux-ci, et surtout la possibilité d'écrire tout filtre nécessaire à leur récupération, ou leur échange avec d'autres logiciels. Ceci permet également aux utilisateurs de stabiliser leur environnement puisqu'ils ne sont plus obligés de migrer en cas d'incompatibilité de formats de données dans leurs applicatifs. La performance Résultant de nombreux examens, de l'utilisation d'algorithmes issus des travaux de recherche les plus avancés, aussi bien qu'éprouvés par de nombreux modes d'utilisation, les logiciels libres sont performants par nature. Souvent des réécritures importantes de codes sont effectuées pour permettre la réutilisation d'idées avec un code meilleur et donc augmenter la performance. De nombreux tests effectués par divers organismes tendent à le prouver également Tableau 2-1. Les performances des logiciels libres Sujet URL Serveur Web [156]Apache face à ses concurrents [157]http://www5.zdnet.com/products/content/pcmg/1709/305867.html Serveur SMB [158]SaMBa face à Windows NT [159]http://www.zdnet.com/sr/stories/news/0,4538,2196106,00.html De plus, encore une fois, rien n'oblige à délivrer une application dont les performances seraient déplorables. L'interopérabilité Historiquement, le milieu Unix a toujours été un ferment d'interopérabilité avec les autres systèmes (grands ou moyens systèmes, aussi bien que micro-informatique). La prise en charge au sein de Linux, par exemple, de nombreux protocoles réseaux, de nombreux formats de systèmes de fichiers, voire de modes de compatibilité binaire garantit cette bonne interopérabilité. La réactivité Face aux cycles de développement de plus en plus longs des éditeurs de logiciels, la réactivité du milieu du logiciel libre intéressera nombre de sites, soucieux d'obtenir rapidement une correction à un problème donné. Ainsi, lors des récentes découvertes de dénis de services IP, les correctifs ont été disponibles dans tous les cas en moins de 3 jours. Et n'était fourni que le correctif fermant le trou de sécurité constaté. Il n'y avait pas d'autres ajouts fonctionnels qui auraient pu créer de nouvelles instabilités. Indépendamment de ses qualités, on peut avancer d'autres argumentaires de natures diverses, en faveur du logiciel libre, suivant le type d'interlocuteur rencontré. Ces différents argumentaires sont détaillés ci-après. _________________________________________________________________ 2.2.2.1. Argumentaire Marketing Des études du cabinet IDC mettent en lumière l'irrésistible montée de Linux comme système d'exploitation serveur. En 1998, Linux est ainsi crédité de 17% de part de marché, avec une progression de 212%, qui est la plus importante sur ce secteur. Les graphes suivant donnent l'ensemble des parts de marché. Figure 2-1. Répartition des systèmes d'exploitation serveur en 1998 (IDC). [idc1998.png] Ceci s'est confirmé en 1999 avec une part de marché passant à 24% et une progression de 93%, toujours plus de quatre fois la progression de son suivant. Figure 2-2. Répartition des systèmes d'exploitation serveur en 1999 (IDC). [idc1999.png] ZDnet [160]rapporte que Dataquest [161]estime pour sa part que les serveurs Linux représenteront, avec 1,1 million d'unités, 14% des serveurs vendus en 2003. Le réseau lui-même produit des outils marketing pour démontrer la supériorité des logiciels libres. Deux indices sont mis à jour régulièrement par [162]Netcraft, sur les logiciels serveur Web, et par l' [163]IOS Counter pour les serveurs sur l'Internet. Les résultats, reproduits ci-dessous, montrent l'importance prise par [164]Apache avec plus de 6 millions de sites opérationnels, écrasant la concurrence, de même que les systèmes libres Linux et *BSD dominent le monde des serveurs de l'Internet. Figure 2-3. Logiciels serveur Web selon Netcraft entre 1995 et 2000. [netcraft.png] Figure 2-4. Répartition des serveurs Internet selon l'IOS Counter en Avril 1999. [ioscounter.png] _________________________________________________________________ 2.2.2.2. Argumentaire Financier Les arguments économiques plaident également en faveur des logiciels libres. Ainsi tout d'abord le coût d'acquisition est modique. Modique car il n'est jamais nul. En effet, même si on peut se le procurer via l'Internet, encore faut-il comptabiliser les coûts afférents à cette liaison. Quoiqu'il en soit, les coûts sont fortement inférieurs à ceux des logiciels commerciaux. Ainsi, une distribution RedHat Linux 6.2 livrée avec plus de 1200 paquetages logiciels coûte environ 300 FRF, alors qu'il faut compter plus de 4000 FRF pour obtenir un Windows NT serveur, livré avec le seul IIS. D'autre part, ne disposant pas de notion de licence par utilisateur ou par service supplémentaires, il n'y a pas non plus de surcoût lors de la montée en puissance de ces logiciels au sein de l'entité où ils sont utilisés. Ce qui n'est évidemment pas le cas avec les logiciels commerciaux dont la logique économique est souvent basée sur le nombre de licences. Les logiciels libres apportent de plus une parfaite maîtrise du Coût Total de Possession, si fréquemment évoqué depuis les déploiements massifs de micro-ordinateurs. Ainsi les coûts d'administration sont restreints puisque des systèmes comme Linux ou FreeBSD, à l'instar d'Unix, s'administrent complètement à distance, soit en mode ligne de commande (via telnet) ou en mode graphique en utilisant X-Window. De plus, on bénéficie d'un mode multi-utilisateurs réel facilitant ces opérations d'administration. Dans ce domaine toujours, il est aussi possible d'effectuer de la télé-administration, soit par les capacités propres des matériels (comme les HP NetServers avec carte Remote Assistant), soit en effectuant une connexion à distance (via modem, boîtier RNIS ou liaison spécialisée) grâce aux protocoles natifs PPP et des systèmes de sécurité tels le tunneling ou ssh. Cette administration peut être elle-même confiée en info-gérance à un prestataire externe. Enfin, les coûts liés au matériel, lui-même, peuvent être contrôlés ; d'une part, si par hasard, les logiciels libres ne faisaient pas affaire, il est toujours possible d'acheter alors des solutions logicielles commerciales pour remplir les besoins non couverts. D'autre part, les solutions à base de logiciels libres, étant par nature très performantes, s'accommodent de plates-formes matérielles qui seraient jugées obsolètes selon les critères d'autres systèmes d'exploitation ou d'applications. Il est ainsi possible d'utiliser du "vieux" matériel, notamment pour maquetter. On pourra ensuite investir, en connaissance de cause, lors du passage en opérationnel de la solution, si besoin est. La croissance en puissance peut, du reste, s'effectuer progressivement. _________________________________________________________________ 2.2.2.3. Argumentaire Technique Cet argumentaire a déjà été abondamment abordé dans les sections précédentes. Je pense néanmoins que certaines notions peuvent donner lieu à des éclairages complémentaires. Ainsi concernant l'aspect fiabilité des solutions à base de logiciel libre, il est important de noter que cela signifie un temps de fonctionnement opérationnel très élevé (propre aux systèmes Unix d'une manière générale). Ceci se mesure par l'intermédiaire de la commande uptime. L'un des clients de Medasys et HP, l'Hôpital Saint-Michel, dispose ainsi d'un Vectra VL5 fonctionnant comme routeur sous Linux depuis plus de 300 jours. Et ce n'est pas un cas isolé. Le respect des standards et des normes, ainsi que l'extrême portabilité générale des logiciels libres assurent aussi pour les applications développées sur ces plates-formes, les mêmes qualités. Et notamment, s'il s'avérait que les performances ou les services apportés par des architectures à base de logiciels libres soient insuffisants, il serait facile de migrer vers des machines offrant plus de performances et de capacités d'évolution, tels que les systèmes HP 9000, tournant sous HP-UX. Enfin une orientation de développement axée vers les performances induit une modularité telle qu'elle permet de retailler le noyau du système au plus près des capacités du matériel, ou l'utilisation de modules chargés dynamiquement en mémoire selon les besoins. Une installation de paquetages peut aller de 40 Mo pour un système minimal à plusieurs Go pour une distribution complète. La linéarité du système permet également la prise en charge de machines multi-processeurs (testé jusqu'à 32 processeurs avec une machine Sparc). La modularité du système permet également d'obtenir un système opérationnel sur une seule disquette 1,44 Mo, soit pour réaliser un environnement minimal de dépannage, soit pour faire un routeur parfaitement opérationnel. Le monde de l'embarqué s'intéresse du reste de plus en plus aux capacités des systèmes tels que Linux, puisqu'outre sa modularité, la disponibilité des sources rend plus aiséé la communication avec des périphériques dédiés (cartes d'acquisition, sondes, ...). Des grands comptes comme le CERN ou Thomson utilisent déjà de tels systèmes. _________________________________________________________________ 2.2.2.4. Argumentaire Solutions Cet argumentaire est certainement le plus important de tous, car il ne sert à rien d'avoir du logiciel libre, si ce n'est pour faire quelque chose d'utile avec ou pour apporter des solutions aux demandes des entités amenées à l'utiliser. Dans quels secteurs le logiciel libre peut-il donc apporter des solutions aujourd'hui ? Eh bien force est de constater que c'est dans la quasi-totalité des secteurs de l'informatique d'entreprise. Historiquement, les logiciels libres ont été utilisés pour réaliser des serveurs Internet/Intranet, puisque leur genèse a été concomitante à celle du réseau. On couvre ainsi tous les aspects liés à l'Internet, depuis le serveur Web ( [165]Apache ), FTP ([166]Wu-Ftpd), DNS ([167]Bind), celui de courrier électronique ([168]Sendmail ou [169]PostFix ), de forums Usenet ([170]INN), de mandataire ([171]IPmasqadm), de pare-feu ([172]IP-Chains), de réseau privé virtuel ([173]OpenSSH), de cache Web ( [174]Squid ) ou encore de serveur de temps ([175]NTP) ou de serveur d'annuaire([176]LDAP) , ou de serveur de contenu([177]Midgard") ... Tous ces logiciels sont fournis en standard dans une distribution Linux. Le client doit être doté du logiciel correspondant à l'application utilisée (lecteur de courrier électronique, lecteur de forum Usenet, navigateur Internet...) quel que soit son système d'exploitation. Le choix du logiciel client est libre, vu que tous ces outils respectent les standards édictés dans les [178]RFCs. Le second domaine de prédilection du logiciel libre est le domaine des serveurs de fichiers et d'impression. Pour ces services, les clients peuvent être multiples : de type Unix (Utilisation de [179]NFS et [180]KNFS ou encore [181]Coda, pour le service de fichiers et de lpd pour le service d'impression), de type Microsoft Windows (Utilisation de [182]SaMBa , qui permet aussi l'utilisation d'imprimantes locales au client), de type Novell (Utilisation de [183]Mars_nwe) ou de type MacIntosh (Utilisation de [184]NetAtalk). Tous ces logiciels sont fournis en standard dans une distribution Linux et ne nécessitent aucun ajout au niveau du client pour fonctionner. Les autres domaines où un système comme Linux peut apporter des solutions sont ceux du calcul, avec des fonctions de [185]multiprocesseur, en liaison avec l'assemblage de [186]nombreux noeuds de calcul avec des interfaces réseau rapide (100 Mbit/s, [187]Gigabit ou [188]Myrinet); ceux de la sécurité des données avec prise en charge des cartes HP NetRaid^[189]Rem. permettant des niveaux de Raid 0, 1, 3, 5, 10, 50, et disque HotSpare, gérés par le matériel ; ceux du service de fax centralisé, avec un logiciel libre comme [190]HylaFAX ou encore comme serveur de sauvegarde sur robot de DAT ou DLT HP SureStore à l'aide d'un logiciel commercial tel que [191]Arkeia ou enfin comme serveur de bases de données avec des solutions libres comme [192]PostgreSQL,[193]MySQL ou commerciales comme [194]Oracle, pour n'en citer que trois. Côté client, bien que cela soit moins mis en valeur pour le moment, les possibilités d'utiliser des solutions basées sur du logiciel libre ou commercial sont nombreuses. Là encore, la partie Internet se taille la part du lion, avec des outils comme des navigateurs Internet graphiques ([195]Netscape) ou textuel ([196]lynx), de nombreux lecteurs de courriers électroniques graphiques ([197]Kmail, [198]XFMail, ...) ou textuels ([199]mutt, [200]elm, ...). Mais il existe également toute une panoplie d'outils nécessaires aujourd'hui à un poste de travail tels que des lecteurs de format PDF ([201]Acrobat Reader ou [202]xpdf), des outils de traitement d'images ([203]ImageMagick, [204]the Gimp, [205]Outils RealPlayer ...), des outils de traitement de texte ([206]LyX, [207]LaTeX, [208]SGMLTools, [209]Wordperfect, ...), des suites bureautiques commerciales ([210]ApplixWare, [211]StarOffice), des outils de gestion du son ([212]WavTools, [213]eplaymidi, [214]xmcd, ...), des outils de gravage de CDs ([215]cdrecord, [216]BurnIT, ... avec des compléments tels que [217]mkisofs, [218]cdparanoia), des émulateurs divers libres et commerciaux ([219]Wine, [220]Executor, [221]WABI, [222]DOSEmu, ...), des compilateurs et interpréteurs pour tous langages ([223]C, [224]C++, [225]Pascal, [226]Fortran, [227]Basic, [228]Tcl/Tk, [229]Perl, [230]Python, [231]Ada, [232]Eiffel, [233]Lisp, [234]Scheme, [235]Prolog...), y compris des versions commerciales ([236] PGI, ...), des environnements graphiques ([237]Gnome, [238]KDE, [239]Motif, ...). L'évolution de ces derniers laisse à penser que les années 2000 pourraient être celles où Linux et les logiciels libres vont percer à leur tour, sur le poste client. Je tiens à signaler que ce document a été réalisé sur une machine HP Brio BAx ne disposant que d'une distribution Linux, à l'aide des outils [240]SGMLTools, [241]Jade et [242]DocBook, qui ont permis à partir d'un seul source de générer les formats HTML, Txt, RTF, PostScript, et PDF. _________________________________________________________________ 2.2.2.5. Argumentaire Service Ce point a longtemps constitué un frein à l'essor des logiciels libres dans les entreprises. Il n'est aujourd'hui plus de mise. En effet, de nombreuses sociétés de services et des constructeurs, comme HP, maîtrisent aujourd'hui ces solutions et offrent du support autour d'elles. D'autres sources d'informations sont également disponibles, en abondance, au travers des nombreux sites Web consacrés à ces solutions, aux listes de discussion spécialisées, ainsi qu'aux divers forums de discussion Usenet, tels que, pour Linux, les groupes internationaux sous la hiérarchie comp.os.linux.* ou les francophones sous la hiérarchie fr.comp.os.linux.*. Côté compétences, de plus en plus de jeunes ingénieurs ou d'universitaires sortent de leur cycle de formation en ayant été formés à l'utilisation des logiciels et systèmes libres. Ce vivier de compétences arrive en ce moment sur le marché du travail et contribuera à amplifier le mouvement de généralisation de ces outils. Enfin, nombre d'entreprises disposent en interne de compétences ignorées. En effet, leur personnel installe souvent ces logiciels chez eux, et en ont une bonne maîtrise, utilisable lors du déploiement de ces logiciels dans leur structure professionnelle. _________________________________________________________________ 2.2.3. Idées fausses sur le logiciel libre Se faire l'avocat des logiciels libres consiste également à relever certaines idées reçues à leur sujet et à les combattre. Parmi celles-ci, les plus souvent évoquées sont : "Il n'y a pas de support, ni de formation" On a vu précédemment que le support était en train de se structurer. Une société comme [243]RedHat fournit aujourd'hui du support sur ses solutions. Rien qu'en France on peut citer des sociétés comme [244]Medasys , [245]Atrid, [246]Alcove qui assurent un support autour des logiciels libres. De même, toujours pour la France, des formations aux logiciels libres peuvent être dispensées par [247]HP France, [248]Learning Tree, l'[249]IUT de Vélizy, sans compter les formations génériques Unix et réseau (que les mêmes organismes proposent également du reste) qui constituent une base essentielle dans un parcours de formation. Enfin, il ne faut pas négliger la capacité de chacun à s'autoformer, grâce notamment à l'abondante documentation disponible (Voir le [250]Chapitre 6). "Il n'y a pas de documentation" Il existe tout un ensemble de manuels, le [251]Linux Documentation Project constitué de FAQ (Foire Aux Questions) et HOWTO (Guide Comment Faire), au total plus de 300 documents autour de Linux, dont l'essentiel [252]traduit en français, disponibles sous forme de documentation libre. Cette documentation est de qualité diverse, et plus ou moins à jour suivant les sujets, certes, mais elle constitue un corpus permettant d'appréhender seul une distribution Linux et l'ensemble de ses composants. À titre personnel, j'y ai toujours trouvé tout ce qu'il me fallait pour effectuer mon travail avec des logiciels libres. Et en cas de besoin complémentaire, une fois encore de nombreux sites Web et groupes de discussion apportent les quelques éléments supplémentaires. Sans compter les innombrables pages de manuel disponibles en ligne également. D'autre part, les sociétés d'éditions [253]O'Reilly et [254]SSC se sont spécialisées dans la fourniture d'ouvrages autour des logiciels libres, rédigés en général par les auteurs des logiciels en question. Leurs ouvrages sont considérés comme faisant référence dans leurs domaines respectifs. "Un produit gratuit ou presque est une sorte de jouet" Il faut toujours faire la différence entre libre et gratuit. De trop nombreux outils gratuits en environnement Microsoft sont effectivement des jouets et de piètre qualité. Ce n'est en rien le cas des logiciels libres, comme démontré dans les sections précédentes. Rappelons qu'ils sont au contraire fiables par construction. "Linux est difficile à installer" Linux est un système d'exploitation professionnel. À ce titre, il demande de la compétence pour son installation, de même qu'un autre système professionnel, comme les autres Unix ou Windows NT par exemple. Mais il n'est pas plus difficile à installer que ceux-ci non plus, notamment avec des distributions telles que RedHat 7.0, Mandrake 7.2, ... Il faut compter environ 30 minutes pour réaliser une installation complète de ces dernières, soit semblablement la même chose que pour HP-UX et sensiblement moins que pour Windows NT Serveur. En revanche, tout comme avant d'installer un serveur sous Windows NT il faut vérifier sa compatibilité avec la [255]Hardware Compatibility List de Microsoft, pour Linux, il est fortement conseillé de vérifier le [256]Guide des matériels (Hardware HOWTO), et pour les machines HP de se reporter à cette [257]page. "Les logiciels libres ne sont pas adaptés pour des tâches lourdes" Ceci est de moins en moins vrai, et cette critique sera caduque avec les prochaines versions de noyaux Linux qui prévoient un système de fichiers journalisé, autorisant un véritable Cluster d'applications. Mais d'ores et déjà Linux autorise l'utilisation de multi-processeurs, de nombreux noeuds pour réaliser des clusters de calcul. Il ne faut pas oublier qu'il est utilisé par le portail [258]Voila (France Telecom) ou le moteur [259]Deja entre autres prestigieuses références. De même, FreeBSD est utilisé avec succès comme système sur le plus gros serveur ftp au monde : [260]Walnut Creek CDROM server "Quel recours ai-je en cas de problème vis-à-vis des éditeurs ?" Il n'y a pas de recours, car les licences des logiciels dégagent les auteurs de toute responsabilité, en cas de problème. Néanmoins, dans les faits les développeurs sont toujours prêts à aider en cas de soucis et tentent de corriger le plus vite possible les anomalies rencontrées (lors du bug F00F du Pentium, un patch pour Linux a été publié dans les 3 jours par exemple). D'un autre côté, les éditeurs commerciaux garantissent très mal les utilisateurs contre des problèmes autres qu'une erreur de paquetage. Reportez-vous aux notices fournies avec vos logiciels pour en juger. _________________________________________________________________ 2.2.4. Les vrais problèmes autour du logiciel libre Il ne serait pas honnête de nier un certain nombre de problèmes résiduels liés aux logiciels libres. Certains sont en voie de résolution, d'autres sont inhérents au système, d'autres enfin mettront du temps à disparaître. Le premier problème, inhérent au modèle du logiciel libre, est la multiplicité des outils et des distributions disponibles. Ainsi, si vous voulez mettre en oeuvre un serveur de courrier électronique, il faudra choisir entre Sendmail, Exim, PostFix, Qmail, Smail. De même que pour installer Linux vous avez la possibilité d'utiliser une distribution [261]RedHat , [262]SuSE, [263]Slackware, [264]Mandrake, [265]Turbo Linux, [266]Debian. Ceci est souvent un problème pour le néophyte, mais l'utilisateur confirmé préférera toujours disposer d'un large choix qu'il confrontera à ses exigences et à son expérience. Tant qu'un acteur respecte les règles du jeu en libérant son code (cas des formats rpm et deb par exemple), il n'y a pas de risque du point de vue de la communauté. Le second problème, inhérent lui aussi à la genèse des logiciels libres, est la nécessité d'avoir des compétences Unix et Internet fortes, pour administrer de telles solutions. La puissance disponible par ces systèmes est proportionnelle à la compétence de leurs administrateurs. Et cela restera vrai malgré l'émergence de solutions de plus en plus graphiques de gestion des systèmes. D'un autre côté, l'investissement en temps passé à apprendre leur fonctionnement se cumule et ne s'annule pas, car vous ne devez pas tout réapprendre pour passer d'une version à l'autre. N'oubliez pas que les systèmes que vous manoeuvrez couramment vous semblent simples, uniquement parce que vous avez passé le temps nécessaire à les apprendre. Quant aux compétences Internet, c'est une lapalissade de dire que cet investissement n'est pas perdu. Enfin, malgré le travail des traducteurs pour fournir des informations en français, une bonne connaissance de l'anglais technique est un plus indéniable. Le dernier problème rencontré dans la mise en oeuvre de solutions autour de logiciels libres est d'arriver à convaincre une partie des décideurs de déroger au mode de pensée dominant. Le but de cette partie est justement de donner tout un faisceau d'arguments pour y parvenir, mais il faut à chaque fois faire preuve de conviction pour arriver à ses fins. Au fur et à mesure de l'adoption de ces solutions par de grands groupes notamment, les résistances deviendront moindres. _________________________________________________________________ 2.3. Linux et les autres systèmes d'exploitation Le but n'est pas de se livrer ici à un examen exhaustif et comparatif des fonctions des divers systèmes d'exploitation disponibles. Il s'agit plutôt de montrer les positionnements respectifs des divers systèmes les uns par rapport aux autres. Seuls les systèmes disposant d'une présence suffisante sur le marché sont considérés. _________________________________________________________________ 2.3.1. Linux et les Unix propriétaires (HP-UX, Tru64, AIX, Solaris, Irix) Le positionnement pris par l'ensemble des constructeurs place aujourd'hui Linux en entrée de gamme (quand il est pris en compte) et leur système Unix en milieu et haut de gamme. La réalité est parfois plus cruelle que le positionnement voulu par le département marketing :-). Techniquement, une distribution Linux n'a rien à envier aux solutions Unix constructeurs, sauf pour le moment, en palette d'applicatifs commerciaux. Et on constate que souvent les utilisateurs dopent leurs stations avec des logiciels libres pour compléter leur usage. Pour être précis dans l'exposé, il convient de considérer les solutions Unix des constructeurs comme réparties en stations et serveurs. Côté station, la cause est entendue: pour un client, la seule raison aujourd'hui d'en acheter est liée soit à la disponibilité d'un logiciel ou d'un matériel qui n'existerait pas dans un environnement libre, soit aux performances intrinsèques du matériel. Dans le premier cas, on peut constater que cet argument devrait avoir une durée de vie limitée, puisqu'il est, en toute logique, de l'intérêt de tout éditeur de logiciel (sauf les constructeurs, peut-être) et tout constructeur de matériel, de porter leurs applications sur tous les environnements majeurs du marché ou d'y faire fonctionner leur matériel. Comme l'ont montré Oracle, Informix, Sybase, ... Linux devient aujourd'hui un de ces environnements. Dans le second cas, l'écart en performances entre la plate-forme dominante de Linux (IA-32) et les autres compétiteurs se restreint et devrait même disparaître dès l'arrivée de l'architecture IA-64, qui semble devoir être adoptée largement par la majorité des acteurs. De plus, souvent Linux est disponible de façon native sur les processeurs des divers acteurs (Sparc, Mips, PowerPC, 68xxx, Alpha, Crusoe, PA-Risc en cours). Je pense que Linux peut représenter le fameux Unix standard et unique dont tout le monde à longtemps rêvé, sans réussir à l'imposer (l'ouverture et la liberté apportées par Linux n'y étant pas étrangères). Il me semble qu'à terme, la station de travail Unix constructeur est amenée à se cantonner sur des niches telles que le calcul haut de gamme, la réalité virtuelle, ... et ceci tant que ces solutions ne sont pas disponibles en environnement libre. Linux offre toutes les qualités fonctionnelles des autres systèmes Unix, et donc de la station de travail, sur une base matérielle variée, et potentiellement meilleur marché, telle que des PCs. Il est donc le choix de tout informaticien à forte culture Unix (ancien client de la station), qui va préférer cette solution à,typiquement, la migration vers un système Microsoft. Côté serveur, en plus des points évoqués pour les stations, les problèmes sont plus complexes. Les capacités mémoires, disques, processeurs, extensions en tout genre, les rendent aujourd'hui encore difficilement remplaçables par des machines d'architecture IA-32 par exemple. De plus, un certain nombre de solutions telles que les clusters de machines pour la haute disponibilité par exemple, ne sont pas encore disponibles en production en environnement Linux. L'autre frein est souvent lié aux investissements déjà effectués autour des solutions logicielles déployées sur ces serveurs. Leur durée de vie naturelle est de toute façon beaucoup plus importante que celle des stations. Les changements seront donc dans ce domaine plus lents. Il y a ici, à juste titre, la possibilité de considérer des solutions Linux comme solutions d'entrée/milieu de gamme, alors que les serveurs Unix des constructeurs constituent le milieu/haut de gamme. L'introduction de Linux en lieu et place de ces machines ne commencera qu'avec la disponibilité importante d'applications, de gestion notamment. Les avantages des solutions constructeurs, qui expliquent qu'elles sont encore souvent choisies lorsque la criticité de l'application prime, sont liés à l'homogénéité de la solution (matériel et logiciel maîtrisés par la même entité, qui ne peut invoquer un tiers en cas de problème), et aux garanties de support et de maintenance fournies. Somme toute, il n'y a pas tant d'antagonisme entre ces systèmes, car ils sont cousins germains. Leur association permet aujourd'hui à des équipes informatiques "pro-Unix" d'avoir des solutions de bout en bout, sans devoir perdre en fonctions, comme cela est souvent le cas avec les autres systèmes d'exploitation disponibles en environnement micro-informatique. _________________________________________________________________ 2.3.2. Linux et SCO La comparaison entre Linux et les systèmes SCO me semble bien déséquilibrée. Déjà l'ensemble des points précédents s'appliquent ici. De plus, SCO n'étant pas un constructeur, l'atout de l'homogénéité disparaît. La plate-forme Intel IA-32 est prise en charge par les deux systèmes, donc le coût est identique. En revanche, la solution logicielle a un coût disproportionné (très peu de logiciel fourni de base, donc de fortes dépenses en extensions, et en nombre d'utilisateurs). Pour avoir à en administrer un, je peux dire que les performances d'un OpenServer sont très en deçà de celles d'un système Linux. De plus, il est de conception plus ancienne, foisonne de liens symboliques qui rendent la gestion compliquée. La base de matériels pris en charge par SCO est plus faible que celle de Linux. Seuls restent à son avantage sa base installée et l'ensemble des applications disponibles. Mais pour combien de temps ? Du reste, le fait que SCO ait choisi Monterey (base AIX) pour le port IA-64 semble assez significatif de l'avenir réservé à OpenServer ou UnixWare. _________________________________________________________________ 2.3.3. Linux et Windows NT La comparaison s'avère ici plus délicate, car Windows NT n'est pas un système ouvert, comme les précédents, ce qui est déjà rédhibitoire pour certains utilisateurs. Un excellent [267]comparatif a été effectué par John Kirch entre Unix et Windows NT Server. Je conseille à toute personne souhaitant avoir un avis éclairé sur le sujet de le lire, il est mis à jour régulièrement, et a été écrit par un spécialiste à la fois des systèmes Microsoft et Unix. Financièrement, l'avantage va évidemment aux logiciels libres. D'autant plus, comme dans le cas de SCO, si l'on considère le panel de logiciels complémentaires nécessaire pour l'utilisation d'un serveur. L'auteur chiffre le rapport de 1 à 100 tout de même ! Techniquement, tant sur les fonctions fournies que sur le fiabilité, l'administration, les performances, les matériels pris en charge, et surtout la sécurité, les systèmes Unix, et en particulier les systèmes libres dépassent ce qui est proposé dans Windows NT. Le fait d'avoir une interface graphique non-indépendante du noyau contribue fortement à l'instabilité de NT, sachant qu'il est plus difficile d'empêcher une interface d'avoir des erreurs (vu qu'on ne maîtrise pas le comportement de l'utilisateur en face d'elle) qu'un noyau. Quels sont donc les réels avantages de Windows NT ? : la force marketing de Microsoft qui persuade le monde entier qu'informatique rime avec Windows et qui s'appuie sur une énorme base installée ; ses applications bureautiques (en position de monopole sur le marché) disponibles uniquement dans cet environnement ; la confusion entretenue entre les différentes versions de Windows (95/98, NT, 2000), et entre une fonction de serveur et de client ; ses accords avec les grands constructeurs qui obligent souvent ceux-ci à livrer un système Microsoft avec leurs matériels ; ses apports technologiques pour occuper le marché en premier, basés sur du code propriétaire et ceci souvent sans respect de standards connus et documentés. L'absence d'hégémonie sur le secteur des serveurs est la meilleure raison d'espérer qu'une pluralité de solutions peut exister à l'avenir pour les utilisateurs d'informatique, y compris sur le poste de travail. _________________________________________________________________ Chapitre 3. Linux et les produits HP La maintenance de ce chapitre est une éternelle fuite en avant :-). _________________________________________________________________ 3.1. Informations sur les produits HP et Linux 3.1.1. Informations générales HP a récemment pris conscience de l'importance que prenaient Linux et les logiciels libres en général, et sur ses plates-formes en particulier. Par conséquent, un site Web consacré à Linux en environnement HP est dorénavant disponible à l'adresse [268]http://www.hp.com/go/linux. En France, il existe depuis plus longtemps un site sur ces thèmes, sous la houlette de Jacques Misselis <[269]Jacques_Misselis@hp.com>, hébergé par [270]l'École Centrale de Lyon à l'adresse [271]http://hpwww.ec-lyon.fr/hpeduc/education. D'autre part, la société [272]Medasys , pour laquelle j'ai travaillé de 1996 à 2000, a mis à disposition de la communauté un certain nombre d'informations depuis 1997, disponibles à l'adresse [273]http://www.medasys.fr/linux. Ce HOWTO est l'aboutissement de ce travail. HP a également réalisé un document de synthèse au format PDF sur son positionnement sur Linux, le [274]White Paper HP Linux Strategy. HP est membre de [275]Linux International. _________________________________________________________________ 3.1.2. Annonces particulières HP communique également par l'intermédiaire de son [276]site Web autour de Linux et des logiciels libres. Vous trouverez ici quelques liens. * Annonce sur FireHunter (06/10/1998) [277]http://www.hp.com/communications/solutions/isp/tools/pressroo m/releases/pr032999a.html * Annonce autour du programme Covision (27/01/1999) [278]http://www.hp.com/pressrel/jan99/27jan99b.htm * Annonce du support de Linux sur NetServers et IA-64 (27/01/1999) [279]http://www.hp.com/pressrel/jan99/27jan99.htm * Annonce du portage sur PA-Risc (01/03/1999) [280]http://www.hp.com/pressrel/mar99/01mar99e.htm * Annonce sur une alliance Informix/HP (02/03/1999) [281]http://www.hp.com/pressrel/mar99/02mar99i.htm * Annonce sur le support Linux sur Kayak (17/03/1999) [282]http://www.hp.com/pressrel/mar99/17mar99e.htm * Annonce sur le Support mondial de Linux (20/04/1999) [283]http://www.hp.com/pressrel/apr99/20apr99a.htm * Annonce autour de HP OpenView (17/05/1999) [284]http://www.openview.hp.com/solutions/itsm/press/press.asp?doc id=314 * Annonce sur la disponibilité d'Apache sur HP 3000 (Été/1999) [285]http://www.businessservers.hp.com/falladvisor/sum99/Summer99/ apache.html * Annonce sur le support Linux de la gamme Visualize (21/06/1999) [286]http://www.hp.com/pressrel/jun99/21jun99g.htm * HP renforce son engagement dans le logiciel Open Source (09/08/1999) [287]http://internetsolutions.enterprise.hp.com/linux/news/PReleas e4.html * Analyse de l'Aberdeen group sur le positionnement d'HP et des Logiciels Libres (09/08/1999) [288]http://internetsolutions.enterprise.hp.com/linux/news/aberdee n_white_paper.html * HP et sa vision de Linux (01/01/2000) [289]http://www.hp.com/visualize/programs/news/archive/linuxvision .html * HP annonce la certification de ses produits DAT et DLT sous Linux (02/02/2000) [290]http://www.hp.com/pressrel/feb00/02feb00c.htm * HP supporte Linux sur ses cartes graphiques haut de gamme Visualize (02/02/2000) [291]http://www.hp.com/pressrel/feb00/02feb00b.htm et [292]http://internetsolutions.enterprise.hp.com/linux/feb02page.ht ml * HP et Intel fournissent le kit de développement IA-64 pour Linux (13/06/2000) [293]http://www.hp.com/pressrel/jun00/13jun00a.htm * HP announce un support Linux pour des Accelerators 3D haut de gamme (25/07/2000) [294]http://www.hp.com/pressrel/jul00/25jul00b.htm * HP étend son engagement sur Linux (14/08/2000) [295]http://www.hp.com/pressrel/aug00/14aug00.htm * HP ajoute le support de Linux à sa plateforme logicielle Chai (26/09/2000) [296]http://www.linux.hp.com/news_events/press_releases/linux_chai .html * Lettre ouverte à la communauté Open Source (18/10/2000) [297]http://www.linux.hp.com/news_events/open_letter.html * Les lecteurs Ultrium HP certifiés compatibles Linux (21/11/2000) [298]http://www.hp.com/hpinfo/newsroom/press/21nov00b.htm * Bruce Perens, promoteur du mouvement Open Source, rejoint HP (04/12/2000) [299]http://www.linux.hp.com/news_events/perens.html * Les NetServers HP utilisés par Solid State Design sous Linux [300]http://netserver.hp.com/netserver/docs/download.asp?file=cs_s olid.pdf * [301]Medasys est choisi par Hewlett-Packard France Education/Recherche comme centre de compétence Linux [302]http://hpwww.ec-lyon.fr/hpeduc/education/offre/linux/educ_lin ux.html * Hewlett-Packard France Education/Recherche s'engage pour la promotion de Linux [303]http://hpwww.ec-lyon.fr/hpeduc/education/offre/linux/hp_linux .html HP France a également publié un article sur Linux et les Logiciels Libres dans son numéro de Mai 1999 de HP Computer News, un article sur le support Linux HP dans le numéro de Septembre 1999, et un article sur les solutions Linux RedHat sur station Visualize HP dans le numéro de Novembre 1999. _________________________________________________________________ 3.2. Les matériels HP pris en charge par Linux Cette section présente l'ensemble des matériels HP qui sont actuellement pris en charge par Linux. Les informations sont ici basées sur le dernier noyau Linux stable, qui en ce moment est la version 2.4.3. Un noyau de développement (versions 2.4test) est aussi disponible mais n'offre pas de garantie de stabilité. _________________________________________________________________ 3.2.1. La gamme informatique basée sur des processeurs Intel Page remise à jour le 6 Avril 2001. Cette gamme est aujourd'hui la principale bénéficiant d'une prise en charge par Linux, et ceci depuis de nombreuses années. Au cas où vous ne l'auriez pas encore fait, quelques lectures préalables sont conseillées avant de se plonger dans la mise en oeuvre de Linux sur ces plates-formes. Le [304]Guide d'installation de Linux (Linux Installation HOWTO) contient le maximum d'informations sur l'installation de Linux. Si vous avez acheté Linux sur CD-ROM, il y a des chances qu'il y ait également des instructions d'installation (le petit livret à l'intérieur du boîtier de disque, et/ou des fichiers sur le CD). Le [305]Guide du noyau Linux (Linux Kernel HOWTO) doit être consulté pour les détails de fabrication du noyau. Je mentionnerai juste ici les points qui sont spécifiques aux matériels HP. Sans indication particulière, la prise en charge par Linux s'entend au moment de l'installation d'une distribution RedHat 7.0. Dans certains cas, une recompilation du noyau sera nécessaire pour bénéficier de la prise en charge complète de certains matériels. Il est à noter que ce qui est valable pour une distribution l'est généralement pour les autres, puisque ces fonctions sont liés au noyau ou au serveur XFree86, et non à la distribution. _________________________________________________________________ 3.2.1.1. La gamme des ordinateurs de bureau (Brio, Vectra, Kayak) HP s'oriente maintenant vers un programme de liberté de choix sur sa gamme de machines de bureau. Linux est ainsi l'un des systèmes d'exploitation soutenu par HP. Cf: [306]http://www.hp.com/desktops/linux/ et [307]http://www.hp.com/pressrel/aug00/14aug00.htm. Une [308]FAQ est également disponible. HP assure le support des matériels certifiés Linux de la façon suivante : Toutes les machines disposent de l'utilitaire [309]Diagtool . Si cet utilitaire indique un problème, il est traité par la maintenance HP. Si il n'en indique pas, il est considéré comme problème logiciel et doit être reporté au fournisseur de la distribution. Les tableaux suivants indiquent l'état de prise en charge de ces matériels par Linux : Tableau 3-1. Brio et Linux Machine Carte Graphique Prise en charge Linux Carte Réseau Prise en charge Linux Carte SCSI Prise en charge Linux Carte Son Prise en charge Linux Testée Brio (D5522A, D5526A, D5857A, D6665A, D5838A, D5848A, D6514A, D5527A, D5528A, D6666A, D6675A, D5849A, D5839A, D5859A, D6666A, D6510A, D6515A, D6667A, D5840A, D5861A, D6668A, D5840C, D5841A, D6516B) S3 Trio 64V2 PCI Oui XFree 3.3.6^[310]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Oui Brio (D6810A, D6812A) ATI Rage Pro ZX AGP Oui XFree 3.3.6^[311]Rem. (Mach 64) Sans N/A Sans N/A ??? ??? Non Brio (D6638A, D6639A, D6640A, D6644A, D7901A, D7902A, D6645A, D6646A) Chipset BX[312]Rem. ATI Rage Pro ZX AGP Oui XFree 3.3.6^[313]Rem. (Mach 64) Sans N/A Sans N/A ??? ??? Non Brio (D5841A, D6516B) Matrox Millenium II PCI Oui XFree 3.3.6^[314]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non Brio (D6760A, D7671A, D6908A, D7930A, D7672A, D7925T, D6776A, D6769A, D6755A, D6895A, D6896A, D6897A, D7931A) Matrox Productiva G100 AGP[315]Rem. Oui XFree 3.3.6^[316]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non Brio BA (D7581A, D7584A, D7585A, D7587A, D7586A, D7591A, D7594A, D8411A) Sis 5595 AGP Oui XFree 3.3.6^[317]Rem. en mode Frame Buffer (FBDEV)[318]Rem. Sans N/A Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[319]Rem. Non Brio BAx (D7600A, D7603A, D7624A, D7625A, D7630A, D7610A)[320]Rem. Matrox Productiva G200 AGP Oui XFree 3.3.6^[321]Rem. (SVGA) Sans N/A Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[322]Rem. Oui Brio BAx (D7605A)[323]Rem. Matrox Productiva G200 AGP Oui XFree 3.3.6^[324]Rem. (SVGA) ??? ??? Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[325]Rem. Non Brio BA400 (D8760A, D8761A, D8763A, D8764A, D8767A, D8768A, D8769A, D8934A, D8935A, D8936A, D8943A, D8947A, D8952A, D8953A, D9720A, D9721A, D9724A) Intel i810 AGP[326]Rem. Oui XFree 3.3.6^[327]Rem. (Intel X Server i810) Sans N/A Sans N/A ??? ??? Oui Brio BA410 (P1682A, P1683A, P1686A, P1687A, P1689A, P1692A, P1694A, P1710A, P1711A, P1718A, P1719A, P1720A, P1722A, 03237A, P2738A, P2739A, P2741A, P2743A, P2745A, P2746A, P3235A, P3263A, P3264A, P3265A, P3266A, P3267A, P3268A, P3269A, P3271A, P3272A, P3662A, P3663A, P3664A, P3665A, P3666A) S3 Savage AGP[328]Rem. Oui XFree 3.3.6^[329]Rem. (S3 X Server Savage) Sans N/A Sans N/A VIA 82C686 Oui pilote Alsa^[330]Rem. Oui Brio BA410 (P1716A, P1721A, P1723A, P3270A, P3273A) S3 Savage AGP[331]Rem. Oui XFree 3.3.6^[332]Rem. (S3 X Server Savage) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Sans N/A VIA 82C686 Oui pilote Alsa^[333]Rem. Oui Brio BA410 (P2744A, P3274A, P3667A) nVidia GeForce 2 GTS AGP Oui XFree 3.3.6^[334]Rem. (SVGA) Sans N/A Sans N/A VIA 82C686 Oui pilote Alsa^[335]Rem. Non Brio BA600 (D8770A, D8771A, D8772A, D8773A, D8778A, D8780A, D8783A, D8784A, D8785A, D8788A, D8789A, D8963A, D9070A, D9072A, D9080A, D9082A, D9085A, D9091A) Chipset BX[336]Rem. Matrox Productiva G200 AGP Oui XFree 3.3.6^[337]Rem. (SVGA) Sans N/A Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[338]Rem. Oui Brio BA600 (D8406A, D8774A, D8781A, D8787A, D8967A, D9075A) Chipset BX[339]Rem. Matrox Productiva G200 AGP Oui XFree 3.3.6^[340]Rem. (SVGA) ??? ??? Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[341]Rem. Non Tableau 3-2. Vectra et Linux Machine Carte Graphique Prise en charge Linux Carte Réseau Prise en charge Linux Carte SCSI Prise en charge Linux Carte Son Prise en charge Linux Testée Vectra VE5 (D5592A, D5602A, D5603A, D5604A, D5606N, D5608A, D5612A, D5615A, D5618A, D5607A, D5617A) S3 Trio 64V2 PCI Oui XFree 3.3.6^[342]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Oui Vectra VE7 (D6530A, D6531A, D6533A, D6610A, D6611A, D6615A, D6616A, D6613A) ATI Rage II C AGP Oui XFree 3.3.6^[343]Rem. (Mach 64) Sans N/A Sans N/A ??? ??? Oui Vectra VE7 (D6532A, D6612A, D6617A, D6618A) ATI Rage II C AGP Oui XFree 3.3.6^[344]Rem. (Mach 64) 3Com 905B-TX 10/100 BT[345]Rem. Oui pilote 3c59x[346]Rem. Sans N/A ??? ??? Oui Vectra VE8 (D6550A, D6560A, D6570A, D6554A, D6584A, D6540A, D6541A, D6544A, D6543A, D6578A, D6573A, D6574A, D6580A,D6581A, D6584A, D6583A, D6593A, D6597A, D6598A) Chipset BX[347]Rem. Matrox Productiva G100 AGP[348]Rem. Oui XFree 3.3.6^[349]Rem. (SVGA) Sans N/A Sans N/A AZTEC 2320 Oui pilote Alsa^[350]Rem. Oui Vectra VE8 (D6552N, D6562N, D6565N, D6542A, D6572A, D6575A, D6582A, D6595A, D6582A, D6585N, D6599A) Chipset BX[351]Rem. Matrox Productiva G100 AGP[352]Rem. Oui XFree 3.3.6^[353]Rem. (SVGA) 3Com 905B-TX 10/100 BT[354]Rem. Oui pilote 3c59x[355]Rem. Sans N/A AZTEC 2320 Oui pilote Alsa^[356]Rem. Oui Vectra VEi7 (D8112A, D8117A, D8121A, D8123A, D8124A, D8126A, D8128A, D8129A, D8131A, D8133A, D8134A, D8136A, D8138A, D8139A, D8141A, D8143A, D8144A, D8145A, D8148A, P1618A, P1619A) Sis 5595 AGP Oui XFree 3.3.6^[357]Rem. en mode Frame Buffer (FBDEV)[358]Rem. Sans N/A Sans N/A ??? ??? Oui Vectra VEi7 (D8118N, D8122A, D8127N, D8132A, D8137A, P1620A) Sis 5595 AGP Oui XFree 3.3.6^[359]Rem. en mode Frame Buffer (FBDEV)[360]Rem. 3Com 905B-TX 10/100 BT[361]Rem. Oui pilote 3c59x[362]Rem. Sans N/A ??? ??? Non Vectra VEi8 (D8166A, D8168A, D8151A, D8153A, D8155A, D8169A, D8171A, D8173A, D8174A, D8181A, D8183A, D8184A, D8186A, D8188A, D9784A, D9785A, D9786A, D9788A, D9791A, D9793A, P1626A, P1628A, P1633A) Matrox Productiva G200 AGP Oui XFree 3.3.6^[363]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non Vectra VEi8 (D8167N, D8152N, D8172N, D8182N, D8187N, D9787N, D9789A, D9792N, P1627A) Matrox Productiva G200 AGP Oui XFree 3.3.6^[364]Rem. (SVGA) 3Com 905B-TX 10/100 BT[365]Rem. Oui pilote 3c59x[366]Rem. Sans N/A ??? ??? Non Vectra VL5 (D4552A, D4543A, D4554A, D4555A, D4556A, D4557A, D4558A, D4559A, D4560A, D4567A, D4562A, D4563A, D4572A, D4574A, D4576A, D4579A, D4577A) S3 Trio 64V2 PCI Oui XFree 3.3.6^[367]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Oui Vectra VL6 Cirrus Logic GD 5446 PCI Oui XFree 3.3.6^[368]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Oui Vectra VL6 Matrox Millenium II PCI Oui XFree 3.3.6^[369]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non Vectra VL7 (D5710A, D5711N, D5725A, D5720A, D5721N, D5731N, D5797N, D5737A, D5799N) Cirrus Logic GD 5465 AGP[370]Rem. Oui XFree 3.3.6^[371]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Oui Vectra VL7 (D5734N, D5729N, D5739N, D5728N, D5798N) Matrox Millenium II PCI Oui XFree 3.3.6^[372]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non Vectra VL7 (D5724N, D5796N) Cirrus Logic GD 5465 AGP[373]Rem. Oui XFree 3.3.6^[374]Rem. (SVGA) AMD 79C971 KC 10/100 BT Oui pilote pcnet32 Sans N/A ??? ??? Non Vectra VL8 (D5880A, D5882A, D5890A, D5891A, D5893A, D5896A, D5898A, D5900A, D5902A, D6945A) Chipset BX[375]Rem. Matrox Productiva G100 AGP[376]Rem. Oui XFree 3.3.6^[377]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non Vectra VL8 (D5881A, D5883A, D5894A, D5888A, D5892A) Chipset BX[378]Rem. Matrox Productiva G100 AGP[379]Rem. Oui XFree 3.3.6^[380]Rem. (SVGA) 3Com 905B-TX 10/100 BT[381]Rem. Oui pilote 3c59x[382]Rem. Sans N/A ??? ??? Non Vectra VL8 (D5887A) Chipset BX[383]Rem. Matrox Productiva G100 AGP[384]Rem. Oui XFree 3.3.6^[385]Rem. (SVGA) 3Com 905B-TX 10/100 BT[386]Rem. Oui pilote 3c59x[387]Rem. ??? ??? ??? ??? Non Vectra VL8 (D6944A) Chipset BX[388]Rem. Matrox Millenium G200 AGP Oui XFree 3.3.6^[389]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non Vectra VL8 (D6940A, D6941A, D6942A) Chipset BX[390]Rem. Matrox Millenium G200 AGP Oui XFree 3.3.6^[391]Rem. (SVGA) 3Com 905B-TX 10/100 BT[392]Rem. Oui pilote 3c59x[393]Rem. Sans N/A ??? ??? Non Vectra VL8 (D6943A) Chipset BX[394]Rem. Matrox Millenium G200 AGP Oui XFree 3.3.6^[395]Rem. (SVGA) 3Com 905B-TX 10/100 BT[396]Rem. Oui pilote 3c59x[397]Rem. Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[398]Rem. ??? ??? Oui Vectra VLi8 (D7941A, D7943A, D7945A, D7948A, D7951A, D7953A, D7955A, D7961A, D7963A, D7965A, D7958A, D7968A, D7969A, D7973A, D7976A, D9459A, D9460A, D9463A, D9467A, D9774A, D9810A, P1894A, P1898A) Matrox Millenium G200 AGP Oui XFree 3.3.6^[399]Rem. (SVGA) Sans N/A Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[400]Rem. Oui Vectra VLi8 (D7826A, D7836A, D7837A, D7846A, D7847A, D7848A, D7856A, D7857A, D7866A, D7867N, D7876A, D7877N, D7942A, D7949A, D7952A, D7959A, D7962A, D7969A, D7972A, D8696A, D8697A, D8950A, D9456A, D9457N, D9461A, D9462A, D9770N, D9771N, D9775A, D9778A, D9779N, D9809A, P1896A, P1899A) Matrox Millenium G200 AGP Oui XFree 3.3.6^[401]Rem. (SVGA) 3Com 905C-TX 10/100 BT Oui pilote 3c59x[402]Rem. Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[403]Rem. Oui Vectra VL400 (D9815A, D9816A, D9817A, D9818A, D9819A, D9820A, D9821A, D9822A, D9824A, D9826A, D9828A, D9829A, D9830A, D9831A, D9833A, P1555A, P1556A, P1557A, P1558A, P1560A, P2260A, P2261A, P2266A, P2265A, P2778A, P2779A, P3351A, P3353A, P3389A, P3390A, P3391A, P3394A, P3614A, P3615A, P3616A, P3618A, P3687A, P3691A, P3694A, P3697A, P3698A, P3699A, P3700A, P3702A, P3704A, P3728A, P3730A, P3732A, P3733A, P3734A, P3735A, P3736A, P3737A, P3738A, P3739A, P3740A, P3743A, P3744A, P3745A, P3746A, P3747A, P4110A, P4116A, P4119A, P4120A, P4121A, P4128A, P4129A, P4130A, P4134A, P4136A, P4137A, P4138A, P4140A, P4352A, P4354A, P4355A, P4368A, P4369A, P4370A, P4371A, P4746A, P4747A, P4748A, P4752A, P4753A) Chipset i820^[404]Rem. Intel i815 AGP[405]Rem. Oui XFree 3.3.6^[406]Rem. (Intel X Server i815) 3Com 905C-TX 10/100 BT Oui pilote 3c59x[407]Rem. Sans N/A Intel 82810 Audio Oui pilote Alsa^[408]Rem. Oui Vectra VL400 (D9825A, D9827A, D9832A, D9834A, P1554A, P1559A, P1561A, P1562A, P3352A, P3384A, P3686A, P3701A, P3703A, P3617A, P3619A, P3688A, P3689A, P3690A, P3692A, P3693A, P3695A, P3696A, P4112N, P4113N, P4114N, P4115A, P4117A, P4118A, P4122A, P4123N, P4124N, P4125N, P4126N, P4127N, P4133A, P4356A, P4357A, P4358A, P4359A, P4360A, P4361A, P4362A, P4363A, P4364A, P4365A, P4366A, P4167A) Chipset i820^[409]Rem. Matrox Millenium G450D AGP ??? 3Com 905C-TX 10/100 BT Oui pilote 3c59x[410]Rem. Sans N/A Intel 82810 Audio Oui pilote Alsa^[411]Rem. RedHat 7.0 Vectra VL400 (P2257A) Chipset i820^[412]Rem. Matrox Millenium G400D AGP Oui XFree 3.3.6^[413]Rem. (SVGA) 3Com 905C-TX 10/100 BT Oui pilote 3c59x[414]Rem. Sans N/A Intel 82810 Audio Oui pilote Alsa^[415]Rem. Non Vectra VL600 (D9733A, D8643A, D8653A, D8657A, D8663A, D8667A, D9737A, D8647A, D8677A, P2780A, P3285A, P3288A) Chipset i820^[416]Rem. Matrox Millenium G250 AGP Oui XFree 3.3.6^[417]Rem. (SVGA) Sans N/A Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[418]Rem. Non Vectra VL600 (D7543N, D8644N, D8648N, D8654N, D8658N, D8664N, D8668N, D8678A, D9734N, D9738N, P2786A, P3286N, P3289N, P3604N, P3705N) Chipset i820^[419]Rem. Matrox Millenium G250 AGP Oui XFree 3.3.6^[420]Rem. (SVGA) 3Com 905C-TX 10/100 BT Oui pilote 3c59x[421]Rem. Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[422]Rem. Non Vectra VL600 (D8635A, D8645A, D8649N, D8655A, D8659N, D8665A, D8669N, D8679N, D9735A, D9739N, P2787A, P3287A, P3290N, P3344N, P3345N, P3605N, P3606N, P3607N, P3608N, P3610N) Chipset i820^[423]Rem. Matrox Millenium G400D AGP Oui XFree 3.3.6^[424]Rem. (SVGA) 3Com 905C-TX 10/100 BT Oui pilote 3c59x[425]Rem. Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[426]Rem. Oui Vectra VL600 (P3609N) Chipset i820^[427]Rem. Matrox Millenium G450D AGP ??? 3Com 905C-TX 10/100 BT Oui pilote 3c59x[428]Rem. Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[429]Rem. Non Vectra VL600 (D8656N) Chipset i820^[430]Rem. Matrox Millenium G250 AGP Oui XFree 3.3.6^[431]Rem. (SVGA) Sans N/A ??? ??? Cirrus Logic CS 4614 Oui pilote Alsa^[432]Rem. Non Vectra VL800 (P2074A, P2076A, P2077A, P2078A, P2080A, P3631A, P3633A, P3635A) P4 Chipset i850^[433]Rem. Matrox Millenium G450D AGP ??? 3Com 905C-TX 10/100 BT Oui pilote 3c59x[434]Rem. Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[435]Rem. Non Vectra VL800 (P2075A, P2079A, P3632A, P3634A) P4 Chipset i850^[436]Rem. nVidia GeForce 2 GTS AGP Oui XFree 3.3.6^[437]Rem. (SVGA) 3Com 905C-TX 10/100 BT Oui pilote 3c59x[438]Rem. Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[439]Rem. Non Vectra XA (D3986A, D3989A, D3990A, D3991A, D3993A, D4770N, D4771N, D4773N, D4774N, D3994N, D3995N, D4776N) Matrox Millenium II PCI Oui XFree 3.3.6^[440]Rem. (SVGA) AMD 79C971 KC 10/100 BT Oui pilote pcnet32 Sans N/A ??? ??? Non Vectra XA (D4777A) Matrox Millenium II PCI Oui XFree 3.3.6^[441]Rem. (SVGA) AMD 79C971 KC 10/100 BT Oui pilote pcnet32 Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[442]Rem. ??? ??? Oui Tableau 3-3. e-PC et Linux Machine Carte Graphique Prise en charge Linux Carte Réseau Prise en charge Linux Carte SCSI Prise en charge Linux Carte Son Prise en charge Linux Testée e-Vectra (D9896T, D9897T, D9898T, D9899T, P2024T, P2025T, P2027T, P2706T, P2707T) Intel i810 AGP[443]Rem. Oui XFree 3.3.6^[444]Rem. (Intel X Server i810) 3Com 905C-TX 10/100 BT Oui pilote 3c59x[445]Rem. Sans N/A Intel 82810 Audio Oui pilote Alsa^[446]Rem. Oui e-PC (P2760A, P2761A, P2763A, P2765A, P2791A, P2792A, P2793A, P2794A, P2795A, P3355A, P3362A, P4229A, P4230A, P4256A, P4265A, P4266A, P4269A, P4271A, P4272A, P4273A, P4274A, P4941A) Intel i810 AGP[447]Rem. Oui XFree 3.3.6^[448]Rem. (Intel X Server i810) 3Com 905C-TX 10/100 BT Oui pilote 3c59x[449]Rem. Sans N/A Intel 82810 Audio Oui pilote Alsa^[450]Rem. RedHat 7.0 Tableau 3-4. Kayak et Linux Machine Carte Graphique Prise en charge Linux Carte Réseau Prise en charge Linux Carte SCSI Prise en charge Linux Carte Son Prise en charge Linux Testée Kayak XA (D4792A, D4795N) Cirrus Logic GD 5465 AGP[451]Rem. Oui XFree 3.3.6^[452]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non Kayak XA (D4807N, D4796N, D6491N, D6492N, D4806N, D4808N, D6493N) Cirrus Logic GD 5465 AGP[453]Rem. Oui XFree 3.3.6^[454]Rem. (SVGA) AMD 79C971 KC 10/100 BT Oui pilote pcnet32 Sans N/A ??? ??? Oui Kayak XA (D4798N, D6490N, D4799N, D4803N, D6494N) Cirrus Logic GD 5465 AGP[455]Rem. Oui XFree 3.3.6^[456]Rem. (SVGA) AMD 79C974 KC 10/100 BT + SCSI Oui pilote pcnet32 Symbios Logic 8751SP avec carte réseau Oui pilote ncr-53c8xx[457]Rem. Analog Device 1816 Oui pilote AD1816^[458]Rem. Oui Kayak XA (D4796S, D6493S) Matrox Millenium II AGP Oui XFree 3.3.6^[459]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non Kayak XA (D4803S) Matrox Millenium II AGP Oui XFree 3.3.6^[460]Rem. (SVGA) AMD 79C974 KC 10/100 BT + SCSI Oui pilote pcnet32 Symbios Logic 8751SP avec carte réseau Oui pilote ncr-53c8xx[461]Rem. ??? ??? Non Kayak XA (D6720N, D6721N, D6723N, D6726N, D6724N, D6730N, D6731N, D6735N, D6736N, D6738N, D6739N, D7994N) Matrox Millenium G200 AGP Oui XFree 3.3.6^[462]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non Kayak XA (D6722N, D6729N, D6734N) Elsa Gloria Synergy + AGP[463]Rem. Oui XFree 3.3.6^[464]Rem. (3D Labs) Sans N/A Sans N/A ??? ??? Oui Kayak XA (D6725N, D6732N, D6737N, D7993N) Matrox Millenium G200 AGP Oui XFree 3.3.6^[465]Rem. (SVGA) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[466]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) Oui pilote ncr-53c8xx[467]Rem. ??? ??? Oui Kayak XA (D6727N) Elsa Gloria Synergy + AGP[468]Rem. Oui XFree 3.3.6^[469]Rem. (3D Labs) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[470]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) Oui pilote ncr-53c8xx[471]Rem. ??? ??? Non Kayak XA (D6728N, D6733N) Accel Galaxy AGP Oui XFree 3.3.6^[472]Rem. en mode Frame Buffer (FBDEV)[473]Rem. sans intérêt Sans N/A Sans N/A ??? ??? Non Kayak XA-s (D5751N, D5752N, D5753N, D5755N, D5754N, D5756N, D5759N) Chipset BX[474]Rem. Matrox Productiva G100 AGP[475]Rem. Oui XFree 3.3.6^[476]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non Kayak XA-s (D5757N, D5758N) Chipset BX[477]Rem. Matrox Productiva G100 AGP[478]Rem. Oui XFree 3.3.6^[479]Rem. (SVGA) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[480]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) Oui pilote ncr-53c8xx[481]Rem. ??? ??? Oui Kayak XA-s (D5765N, D5763N, D5766N, D5769N, D7982N, D7986N, D7991N, D7987N) Chipset BX[482]Rem. Matrox Productiva G200 AGP Oui XFree 3.3.6^[483]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Oui Kayak XA-s (D5768N, D5767N) Chipset BX[484]Rem. Matrox Productiva G200 AGP Oui XFree 3.3.6^[485]Rem. (SVGA) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[486]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) Oui pilote ncr-53c8xx[487]Rem. ??? ??? Non Kayak XA-s (D5762N, D7984N, D7988N) Chipset BX[488]Rem. Elsa Gloria Synergy + AGP[489]Rem. Oui XFree 3.3.6^[490]Rem. (3D Labs) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[491]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) Oui pilote ncr-53c8xx[492]Rem. ??? ??? Oui Kayak XA-s (D5764N, D7983N, D7989N) Chipset BX[493]Rem. Accel Galaxy AGP Oui XFree 3.3.6^[494]Rem. en mode Frame Buffer (FBDEV)[495]Rem. sans intérêt AMD 79C971 KC 10/100 BT + SCSI (D6692A)[496]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) Oui pilote ncr-53c8xx[497]Rem. ??? ??? Non Kayak XA-s (D7990N) Chipset BX[498]Rem. Matrox Productiva G100 AGP[499]Rem. Oui XFree 3.3.6^[500]Rem. (SVGA) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[501]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) Oui pilote ncr-53c8xx[502]Rem. ??? ??? Non Kayak XA-s (D7992N) Chipset BX[503]Rem. Elsa Gloria Synergy II AGP Oui XFree 3.3.6^[504]Rem. (SVGA) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[505]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) Oui pilote ncr-53c8xx[506]Rem. Analog Device 1816 Oui pilote AD1816^[507]Rem. Oui Kayak XM600 (D9531N, D9533N, D9535N, D9541N, D9549N, D9552N, D9553N, D9555N, D9556N, D9557N, D9559N, P1642N, P1645N, P1653N, P1655N, P1658N, P2055N, P2191N, P2202N) Matrox Millenium G250 AGP Oui XFree 3.3.6^[508]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[509]Rem. Non Kayak XM600 (P1650N, P1652N, P1656N) Matrox Millenium G250 AGP Oui XFree 3.3.6^[510]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[511]Rem. Cirrus Logic CS 4614 Oui pilote Alsa^[512]Rem. Non Kayak XM600 (D8350N, D9554N, D9558N) [513]Rem. Matrox Millenium G250 AGP Oui XFree 3.3.6^[514]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[515]Rem. Non Kayak XM600 (P2054N) [516]Rem. Matrox Millenium G400D AGP Oui XFree 3.3.6^[517]Rem. (SVGA) Sans N/A Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[518]Rem. Non Kayak XM600 (D9563N) Matrox Millenium G400D AGP Oui XFree 3.3.6^[519]Rem. (SVGA) Sans N/A Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[520]Rem. Non Kayak XM600 (D9536N, D9537N, D9538N, D9544N, D9548N, P1646N, P1648N, P2192N, P2193N, P2203N, P2204N, P2204N, P2192N, P2193N) Matrox Millenium G400D AGP Oui XFree 3.3.6^[521]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[522]Rem. Non Kayak XM600 (D9539N, D9565N, P1651N, P1657N, P2190N, P2194N) Matrox Millenium G400D AGP Oui XFree 3.3.6^[523]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[524]Rem. Cirrus Logic CS 4614 Oui pilote Alsa^[525]Rem. Non Kayak XM600 (D9550N, D9567N) Elsa Gloria Synergy II AGP Oui XFree 3.3.6^[526]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[527]Rem. Oui Kayak XM600 (D9534N, D9540N, D9543N, D9546N, D9564N, P1644N, P1647N, P1649N, P2053N, P2056N, P2195N, P2210N, P2211N) Elsa Gloria Synergy II AGP Oui XFree 3.3.6^[528]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[529]Rem. Cirrus Logic CS 4614 Oui pilote Alsa^[530]Rem. Oui Kayak XM600 (D9545N, D8366N) 3DLabs Oxygen GVX1 AGP Oui XFree 3.3.6^[531]Rem. en mode Frame Buffer (FBDEV)[532]Rem. SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[533]Rem. Cirrus Logic CS 4614 Oui pilote Alsa^[534]Rem. Oui Kayak XU (D4691N, D4692N, D4695N, D4701N, D4693N, D4694N, D4702N, D4705N) Matrox Millenium II PCI Oui XFree 3.3.6^[535]Rem. (SVGA) AMD 79C971 KC 10/100 BT Oui pilote pcnet32 Adaptec AIC 7860 PCI + Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[536]Rem. ??? ??? Oui Kayak XU (D5680N, D5682N, D5683N, D5684N) Chipset BX[537]Rem. Matrox Millenium II PCI Oui XFree 3.3.6^[538]Rem. (SVGA) AMD 79C971 KC 10/100 BT Oui pilote pcnet32 Adaptec AIC 7860 PCI + Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[539]Rem. Analog Device 1816 Oui pilote AD1816^[540]Rem. Oui Kayak XU (D5702, D5704, D5686N, D6336N, D6348N, D8431N, D8920N) Matrox Millenium G200 AGP Oui XFree 3.3.6^[541]Rem. (SVGA) AMD 79C972 10/100 BT + SCSI (D6692A)[542]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) + Adaptec AIC 7880 PCI Oui pilote ncr53c8xx et pilote aic7xxx ??? ??? Oui Kayak XU (D5687N, D6333N, D6334N, D8432N, D6345N, D8923N) Elsa Gloria Synergy + AGP[543]Rem. Oui XFree 3.3.6^[544]Rem. (3D Labs) AMD 79C972 10/100 BT + SCSI (D6692A)[545]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) + Adaptec AIC 7880 PCI Oui pilote ncr53c8xx et pilote aic7xxx ??? ??? Non Kayak XU (D6337N, D6346N) Accel Galaxy AGP Oui XFree 3.3.6^[546]Rem. en mode Frame Buffer (FBDEV)[547]Rem. sans intérêt AMD 79C972 10/100 BT + SCSI (D6692A)[548]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) + Adaptec AIC 7880 PCI Oui pilote ncr53c8xx et pilote aic7xxx ??? ??? Non Kayak XU (D6347N) Matrox Productiva G100 AGP[549]Rem. Oui XFree 3.3.6^[550]Rem. (SVGA) AMD 79C972 10/100 BT + SCSI (D6692A)[551]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) + Adaptec AIC 7880 PCI Oui pilote ncr53c8xx et pilote aic7xxx ??? ??? Non Kayak XU (D8924N) Matrox Millenium G400D AGP Oui XFree 3.3.6^[552]Rem. (SVGA) AMD 79C972 10/100 BT + SCSI (D6692A)[553]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) + Adaptec AIC 7880 PCI Oui pilote ncr53c8xx et pilote aic7xxx ??? ??? Non Kayak XU700 (A7185C) Matrox Millenium G450D AGP ??? ??? ??? Sans N/A ??? ??? Non Kayak XU700 (A7186C) Matrox Millenium G450D AGP ??? ??? ??? ??? ??? ??? ??? Non Kayak XU800 (D8019N) [554]Rem. Matrox Millenium G250 AGP Oui XFree 3.3.6^[555]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[556]Rem. Non Kayak XU800 (D8021N, P1586N, P1661N) [557]Rem. Matrox Millenium G400D AGP Oui XFree 3.3.6^[558]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Sans N/A Cirrus Logic CS 4614 Oui pilote Alsa^[559]Rem. Non Kayak XU800 (D8000N, D8001N) [560]Rem. [561]Rem. Matrox Millenium G250 AGP Oui XFree 3.3.6^[562]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[563]Rem. Cirrus Logic CS 4614 Oui pilote Alsa^[564]Rem. Non Kayak XU800 (D8002N, D8010N, D8016N, P1585N, P1589N, P1663N, P1664N, P1668N) [565]Rem. Matrox Millenium G250 AGP Oui XFree 3.3.6^[566]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[567]Rem. Cirrus Logic CS 4614 Oui pilote Alsa^[568]Rem. Non Kayak XU800 (D8003N, D8006N, D8012N, P1587N, P1665N, P1669N) [569]Rem. Matrox Millenium G400D AGP Oui XFree 3.3.6^[570]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[571]Rem. Cirrus Logic CS 4614 Oui pilote Alsa^[572]Rem. Oui Kayak XU800 (P1667N) [573]Rem. [574]Rem. Matrox Millenium G400D AGP Oui XFree 3.3.6^[575]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[576]Rem. Cirrus Logic CS 4614 Oui pilote Alsa^[577]Rem. Non Kayak XU800 (D8007N, D8013N, D8020N, D8022N, P1588N, P1590N, P1662N, P3220N, P3221N) [578]Rem. Elsa Gloria Synergy II AGP Oui XFree 3.3.6^[579]Rem. (SVGA) SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[580]Rem. Cirrus Logic CS 4614 Oui pilote Alsa^[581]Rem. Non Kayak XU800 (D8009N, D8015N) [582]Rem. 3DLabs Oxygen GVX1 AGP Oui XFree 3.3.6^[583]Rem. en mode Frame Buffer (FBDEV)[584]Rem. SMC 1211 TX EZ Card 10/100 BT Oui pilote rtl8139 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[585]Rem. Cirrus Logic CS 4614 Oui pilote Alsa^[586]Rem. Oui Kayak XW (D6475N) Elsa Gloria Synergy[587]Rem. Oui XFree 3.3.6^[588]Rem. (3D Labs) AMD 79C971 KC 10/100 BT Oui pilote pcnet32 Adaptec AIC 7860 PCI + Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[589]Rem. ??? ??? Non Kayak XW (D5505N, D5507N, D5509N) Accel Eclipse PCI Oui XFree 3.3.6^[590]Rem. en mode Frame Buffer (FBDEV)[591]Rem. sans intérêt AMD 79C971 KC 10/100 BT Oui pilote pcnet32 Adaptec AIC 7860 PCI + Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[592]Rem. ??? ??? Non Kayak XW (D5510N, D5514N, D6485N) HP Fx-4 AGP Oui HP X Server[593]Rem. AMD 79C971 KC 10/100 BT Oui pilote pcnet32 Adaptec AIC 7860 PCI + Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[594]Rem. ??? ??? Non Kayak XW (D6480N, D6481N, D6482N) Chipset BX[595]Rem. Accel Eclipse PCI Oui XFree 3.3.6^[596]Rem. en mode Frame Buffer (FBDEV)[597]Rem. sans intérêt ??? ??? ??? ??? ??? ??? Non Kayak XW (D6797N) HP Fx-6 AGP Oui HP X Server[598]Rem. ??? ??? ??? ??? ??? ??? Non Kayak XW (D6486N, D6487N, D6488N) Chipset BX[599]Rem. HP Fx-4 AGP Oui HP X Server[600]Rem. ??? ??? ??? ??? ??? ??? Non Le système de surveillance HP Kayak Maxilife, disponible sur toute la gamme des Kayaks est utilisable avec Linux par l'intermédiaire de l'outil [601]Lm_sensors Les stations Visualize sont disponibles sous deux formes : les stations p et x sont préinstallées, supportées et configurées sous Windows ; les stations pl et xl sont préinstallées, supportées et configurées sous Linux. Il n'y a pas de différence dans le matériel de base des systèmes, mais l'image Linux préinstallée sur les pl et xl est adaptée de telle sorte que tous les pilotes nécessaires au système sont préconfigurés -- il n'y a pas besoin de les spécifier ou de les adapter. Tableau 3-5. Visualize et Linux Machine Carte Graphique Prise en charge Linux Carte Réseau Prise en charge Linux Carte SCSI Prise en charge Linux Carte Son Prise en charge Linux Testée Visualize P (A1296A, A5015A) Chipset BX[602]Rem. Elsa Gloria Synergy + AGP[603]Rem. Oui XFree 3.3.6^[604]Rem. (3D Labs) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[605]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) Oui pilote ncr-53c8xx[606]Rem. Analog Device 1816 Oui pilote AD1816^[607]Rem. RedHat 6.0, 6.1 Visualize P (A1296A, A5015A) Chipset BX[608]Rem. Elsa Gloria Synergy II AGP Oui XFree 3.3.6^[609]Rem. (SVGA) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[610]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) Oui pilote ncr-53c8xx[611]Rem. Analog Device 1816 Oui pilote AD1816^[612]Rem. RedHat 6.0, 6.1 Visualize P (A6034A, A6038A) Elsa Gloria Synergy II AGP Oui XFree 3.3.6^[613]Rem. (SVGA) Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Adaptec AIC 7892 PCI Oui pilote aic7xxx[614]Rem. Cirrus Logic CS 4280 Oui pilote Alsa^[615]Rem. RedHat 6.2 Visualize P (A6034A, A6038A) HP Fx-5 AGP Oui HP X Server[616]Rem. Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Adaptec AIC 7892 PCI Oui pilote aic7xxx[617]Rem. Cirrus Logic CS 4280 Oui pilote Alsa^[618]Rem. RedHat 6.2 Visualize P (A6034A, A6038A) HP Fx-10 AGP Oui HP X Server[619]Rem. Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Adaptec AIC 7892 PCI Oui pilote aic7xxx[620]Rem. Cirrus Logic CS 4280 Oui pilote Alsa^[621]Rem. RedHat 6.2 Visualize X (A1297A, A5014A) Chipset BX[622]Rem. Elsa Gloria Synergy + AGP[623]Rem. Oui XFree 3.3.6^[624]Rem. (3D Labs) AMD 79C971 KC 10/100 BT + SCSI (D6692A)[625]Rem. Oui pilote pcnet32 Symbios Logic 53c875 avec carte réseau (D6692A) Oui pilote ncr-53c8xx[626]Rem. Analog Device 1816 Oui pilote AD1816^[627]Rem. RedHat 6.0 Visualize X (A1280A, A6020A) Elsa Gloria Synergy II AGP Oui XFree 3.3.6^[628]Rem. (SVGA) Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Adaptec AIC 7892 PCI Oui pilote aic7xxx[629]Rem. Cirrus Logic CS 4280 Oui pilote Alsa^[630]Rem. RedHat 6.2 Visualize X (A1280A, A6020A) HP Fx-5 AGP Oui HP X Server[631]Rem. Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Adaptec AIC 7892 PCI Oui pilote aic7xxx[632]Rem. Cirrus Logic CS 4280 Oui pilote Alsa^[633]Rem. RedHat 6.2 Visualize X (A1280A, A6020A) HP Fx-10 AGP Oui HP X Server[634]Rem. Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Adaptec AIC 7892 PCI Oui pilote aic7xxx[635]Rem. Cirrus Logic CS 4280 Oui pilote Alsa^[636]Rem. RedHat 6.2 Une page dédiée à ces machines et leur fonctionnement sous Linux est disponible à l'adresse suivante : [637]http://www.hp.com/workstations/products/linux/index.html Une page de questions et réponses sur ces machines est aussi disponible à l'adresse suivante : [638]http://www.hp.com/visualize/programs/news/archive/qa1.html Notamment, il est conseillé d'utiliser un noyau 2.2.16 au moins pour une prise en charge correcte du SCSI de ces machines. Un serveur X en beta test pour les cartes FX2+, FX4+ et FX6+ est disponible à l'adresse suivante : [639]http://www.hp.com/workstations/support/software/drivers/linux/vid eo/fxvideo/fx6/driver.html? Un serveur X pour les cartes FX5 et FX10 est disponible à l'adresse suivante : [640]http://www.hp.com/workstations/support/software/drivers/linux/vid eo/fxvideo/fx10/index.html _________________________________________________________________ 3.2.1.2. Les accessoires des machines de bureau Le tableau suivant indique l'état de prise en charge de ces matériels par Linux. Tableau 3-6. Les accessoires des machines de bureau Référence Type de Carte Chipset Prise en charge Linux Testée D1553A Extension ISA Slots Extension kit None Oui D5480A Carte FastRaid Adaptec ARO Raidport Non Non D6690A Carte FastRaid Adaptec ARO Raidport Non Non D6951A Carte SCSI Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[641]Rem. Oui D9528A Carte SCSI Symbios Logic 8952U Ultra2 Wide PCI ??? Non D9529A Carte SCSI Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[642]Rem. Oui D9663A Carte SCSI Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[643]Rem. Oui D9561A Carte SCSI ??? ??? Non D6936A Carte Réseau AMD 79C972 AKC 10/100 BT Oui pilote pcnet32 Oui D7504A Carte Réseau 3Com 905B-TX 10/100 BT[644]Rem. Oui pilote 3c59x[645]Rem. Oui D7506A Carte Réseau ??? ??? Non D7508A Carte Réseau ??? ??? Non D7522A Carte Réseau 3Com 905C-TX 10/100 BT Oui pilote 3c59x[646]Rem. Oui D7531A Carte Réseau Carte HP chipset RealTek Oui pilote RealTek Oui D6657A Carte Son ??? ??? Non D5183A Carte Son ??? ??? Non P1552A Carte Vidéo Matrox Millenium G250 AGP Oui XFree 3.3.6^[647]Rem. (SVGA) Oui D9521A Carte Vidéo Matrox Millenium G400D AGP Oui XFree 3.3.6^[648]Rem. (SVGA) Oui D9509A, D9522A, D9522B Carte Vidéo Elsa Gloria Synergy II AGP Oui XFree 3.3.6^[649]Rem. (SVGA) Oui D9523A Carte Vidéo 3DLabs Oxygen GVX1 AGP Oui XFree 3.3.6^[650]Rem. en mode Frame Buffer (FBDEV)[651]Rem. Oui P1971A Carte Vidéo nVidia GeForce 2 GTS AGP Oui XFree 3.3.6^[652]Rem. (SVGA) Non Les lecteurs de CD-ROM, DVD et ZIP sont pris en charge par le noyau Linux. Reportez-vous aux divers HOWTO pour leur mise en oeuvre, suivant l'interface utilisée. _________________________________________________________________ 3.2.1.3. La gamme des portables (OmniBook) Pour suspendre sur disque la session en cours, il faut ne pas avoir effacé la partition d'hibernation, avoir le support de l'APM au niveu du noyau, et utiliser la combinaison de touches Fn+F12. Le tableau suivant indique l'état de prise en charge de ces matériels par Linux. Tableau 3-7. OmniBook et Linux Machine Carte Graphique Prise en charge Linux Carte Réseau Prise en charge Linux Carte SCSI Prise en charge Linux Carte Son Prise en charge Linux Testée OmniBook Sojourn (F1430A) Neomagic MagicGraph 128XD NM2160 Oui XFree 3.3.6^[653]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non OmniBook [654]XE (F1719W, F1720W, F1721W, F1722W) [655]Rem. Silicon Motion LynxE SM810^[656]Rem. Oui XFree 3.3.6^[657]Rem. (SVGA) Sans N/A Sans N/A ESS Maestro 2 Oui pilote maestro[658]Rem. Oui OmniBook [659]XE2 (F1664W, F1666W, F1666N, F1667W, F1667N, F1674W, F1675W, F1753W, F1756W, F1755W, F1755N, F1772W, F1774N, F1774W, F1775N, F1775W, F1962W, F2051W, F2052W, F2052K, F2053W, F2053K, F2055W, F2055K, F2065W, F2065K, F2068W, F2069W, F2069K) [660]Rem. Silicon Motion LynxE SM810^[661]Rem. Oui XFree 3.3.6^[662]Rem. (SVGA) Sans N/A Sans N/A ESS Maestro 3 Oui[663]Rem. Oui OmniBook [664]XE3 (F2113W, F2113K, F2114W, F2114K) [665]Rem. [666]Rem. S3 Savage AGP[667]Rem. Oui XFree 3.3.6^[668]Rem. (S3 X Server Savage) Sans N/A Sans N/A ESS Maestro 3 Oui[669]Rem. Oui OmniBook [670]XE3 (F2115W, F2115K, F2116W, F2116K, F2117W, F2117K, F2302W, F2302K, F2303W, F2303K, F2305W, F2305K, F2306W, F2306K, F2308W, F2308K, F2321W, F2321K) [671]Rem. [672]Rem. S3 Savage AGP[673]Rem. Oui XFree 3.3.6^[674]Rem. (S3 X Server Savage) Accton EN2242 minipci Oui pilote tulip Sans N/A ESS Maestro 3 Oui[675]Rem. Oui OmniBook [676]500 (F2158W, F2158K, F2159W, F2159K, F2161W, F2161K, F2162W, F2162K) ATI Rage Mobility Oui XFree 3.3.6^[677]Rem. en mode Frame Buffer (FBDEV)[678]Rem. [679]Rem. Sans N/A Sans N/A ESS Maestro 3 Oui[680]Rem. Non OmniBook [681]500 (F2164W, F2164K, F2165W, F2165K, F2167W, F2167K, F2168W, F2168K) ATI Rage Mobility Oui XFree 3.3.6^[682]Rem. en mode Frame Buffer (FBDEV)[683]Rem. [684]Rem. 3Com 3C556 10/100 BT Oui pilote [685]Rem. Sans N/A ESS Maestro 3 Oui[686]Rem. Non OmniBook [687]600 () Chips & Technologies CT65545 Oui XFree 3.3.6^[688]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non OmniBook [689]800 (F1360A, F1175A, F1174A, F1173A, F1172A, F1171A) Neomagic MagicGraph 128XD NM2160 Oui XFree 3.3.6^[690]Rem. (SVGA) Sans N/A Carte SCSI Oui pilote ncr-53c8xx[691]Rem. SoundBlaster compatible Oui pilote sb Oui OmniBook [692]900 (F1711W, F1712W, F1760W, F1711N, F1712N, F1765N) Neomagic MagicGraph 256AV NM2200 Oui XFree 3.3.6^[693]Rem. (SVGA) Sans N/A Sans N/A Analog Device 1848 Oui pilote AD1848 Oui OmniBook [694]900 (F1769W, F1769N, F1769K, F1770W, F1770N, F1770K, F1979W, F1979N, F1979K, F1980W, F1980N, F1980K, F2007W, F2007N, F2007K) ATI Rage Mobility Oui XFree 3.3.6^[695]Rem. en mode Frame Buffer (FBDEV)[696]Rem. [697]Rem. Sans N/A Sans N/A ESS Maestro 2 Oui pilote maestro[698]Rem. Oui OmniBook 2000 (F1356A, F1397A) Chips & Technologies CT65554 Oui XFree 3.3.6^[699]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non OmniBook 2100 (F1584W, F1580W, F1581W, F1597W, F1598W, F1599W, F1600W, F1729W) Neomagic MagicGraph 128XD NM2160 Oui XFree 3.3.6^[700]Rem. (SVGA) Sans N/A Sans N/A Crystal CS 4232 Oui Oui OmniBook [701]3000 (F1391A, F1392A, F1393A) Neomagic MagicGraph 128XD NM2160 Oui XFree 3.3.6^[702]Rem. (SVGA) Sans N/A Sans N/A Crystal CS 4232 Oui Non OmniBook [703]3100 (F1582W) Neomagic MagicGraph 128XD NM2160 Oui XFree 3.3.6^[704]Rem. (SVGA) Sans N/A Sans N/A SoundBlaster compatible Oui pilote sb Non OmniBook [705]4000 () WD90C24 PCI Oui XFree 3.3.6^[706]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Non OmniBook 4100 (F1462W, F1463W, F1479W, F1464W, F1703W) Neomagic MagicGraph 128XD NM2160 Oui XFree 3.3.6^[707]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Oui OmniBook [708]4150 (F1629W, F1640W, F1641W, F1642W, F1629N, F1640N, F1641N, F1642N, F1647W, F1647N, F1648W, F1648N, F1663W, F1663N) Neomagic MagicGraph 256AV NM2200 Oui XFree 3.3.6^[709]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Oui OmniBook 4150 (F1649W, F1649N, F1649K, F1650W, F1650N, F1650K, F1658W, F1658N, F1660W, F1660N, F1662W, F1662N, F1662K, F1976W, F1976N, F1976K, F1983W, F1983N, F1983K, F2000W, F2000N, F2000K, ) ATI Rage Mobility Oui XFree 3.3.6^[710]Rem. en mode Frame Buffer (FBDEV)[711]Rem. [712]Rem. Sans N/A Sans N/A ESS Maestro 2 Oui pilote maestro[713]Rem. Oui OmniBook [714]5000 () Chips & Technologies CT65545 Oui XFree 3.3.6^[715]Rem. (SVGA) Sans N/A Sans N/A Crystal CS 4232 Oui Oui OmniBook [716]5500 () Chips & Technologies CT65548 Oui XFree 3.3.6^[717]Rem. (SVGA) Sans N/A Sans N/A Crystal CS 4232 Oui Oui OmniBook [718]5700 (F1352A, F1353A, F1396A, F1354A, F1355A) Chips & Technologies CT65554 Oui XFree 3.3.6^[719]Rem. (SVGA) Sans N/A Sans N/A ??? ??? Oui OmniBook [720]6000 (F2072W, F2072K, F2079W, F2079K, F2081W, F2081K, F2083W, F2083K, F2087W, F2087K, F2090W, F2090K, F2140W, F2140K, F2144W, F2144K, F2148W, F2148K, F2150W, F2150K, F2186W, F2186K, F2182W, F2182K, F2184W, F2184K, F2200W, F2200K, F2202W, F2202K) ATI Rage Mobility Oui XFree 3.3.6^[721]Rem. en mode Frame Buffer (FBDEV)[722]Rem. [723]Rem. 3Com 3C556 10/100 BT Oui pilote [724]Rem. Sans N/A ESS Maestro 3 Oui[725]Rem. Oui OmniBook [726]7100 (F1441W, F1442W) ATI Rage LT Pro Oui XFree 3.3.6^[727]Rem. (Mach 64) Sans N/A Sans N/A SoundBlaster compatible Oui pilote sb RedHat 7.0 OmniBook 7150 (F1443W) ATI Rage LT Pro Oui XFree 3.3.6^[728]Rem. (Mach 64) Sans N/A Sans N/A ESS Maestro 2 Oui pilote maestro[729]Rem. Non _________________________________________________________________ 3.2.1.4. Les accessoires des portables Les cartes mentionnées ci-dessous sont des cartes PCMCIA ou PC-Card. Le tableau suivant indique l'état de prise en charge de ces matériels par Linux. Tableau 3-8. Les accessoires des portables Référence Type de Carte Chipset Prise en charge Linux Testée F1623A Carte Réseau/Modem Xircom CEM56-100 56Kb 10/100 BT Oui pilote xirc2ps_cs Oui F1625A Carte Modem ??? ??? Non F1626A Carte Réseau 3Com 3CXFE575BT 10/100 BT ??? Non F1626B Carte Réseau ??? ??? Non F1643A Carte Réseau/Modem ??? ??? Non F1782A Carte Réseau/Modem ??? ??? Non _________________________________________________________________ 3.2.1.5. La gamme des serveurs (NetServer) Une page concernant le fonctionnement de Linux sur les NetServers HP est disponible à l'adresse [730]http://www.netserver.hp.com/netserver/products/highlights_linux.a sp Une matrice de compatibilité officielle des NetServers HP avec Linux et d'autres systèmes d'exploitation est disponible sous : [731]http://netserver.hp.com/netserver/support/compatibility/drvmatrx. htm Des documents officiels d'aide à la configuration des NetServers sous Linux [732]RedHat [733]5.2 et [734]6.0 sont également disponibles. Le tableau suivant indique l'état de prise en charge de ces matériels par Linux. Tableau 3-9. NetServers et Linux Machine Carte Graphique Prise en charge Linux Carte Réseau Prise en charge Linux Carte SCSI Prise en charge Linux Carte Son Prise en charge Linux Testée NetServer E45 (D4973A, D4974A, D4975A, D4976A, D5971A) Cirrus Logic GD 5446 PCI Oui XFree 3.3.6^[735]Rem. (SVGA) Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Adaptec AIC 2910bui (7860) PCI Oui pilote aic7xxx[736]Rem. Sans N/A Non NetServer E50 (D6034A, D6033A, D6035A, D6031A, D6030A, D6032A) Cirrus Logic GD 5446 PCI Oui XFree 3.3.6^[737]Rem. (SVGA) Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[738]Rem. Sans N/A Oui NetServer E55 (D9337A) ATI Rage II C AGP Oui XFree 3.3.6^[739]Rem. (Mach 64) Intel S82093A / i82559 10/100 BT Oui pilote eepro-100 Adaptec AIC 7895H PCI Oui pilote aic7xxx[740]Rem. Sans N/A Non NetServer E60 (D7140A, D7142A, D7144A, D7146A, D7148A, D9123A, D9127A, D9128A, D9129A) ATI Rage II C AGP Oui XFree 3.3.6^[741]Rem. (Mach 64) Intel S82093A / i82559 10/100 BT Oui pilote eepro-100 Adaptec AIC 7895H PCI Oui pilote aic7xxx[742]Rem. Sans N/A Oui NetServer E200 (P1205A, P2448A) ATI Rage II C AGP Oui XFree 3.3.6^[743]Rem. (Mach 64) Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[744]Rem. Sans N/A Non NetServer E800 (D9400A, D9402A, D9404A, D9408A, D9409, D9411A, P1195A, P1200A, P2457A, P2458A, P2460A, P2477A, P2502A, P2503A, P2504A, P3428A, P3432A) [745]Rem. ATI Rage II C AGP Oui XFree 3.3.6^[746]Rem. (Mach 64) Intel S82093A / i82559 10/100 BT Oui pilote eepro-100 2 Symbios Logic 53C896 PCI Oui pilote sym-53c8xx[747]Rem. Sans N/A RedHat 7.0, Mandrake 7.2 NetServer LC (D3343A) Trident TVGA 9000i Oui XFree 3.3.6^[748]Rem. (SVGA) Sans N/A Adaptec AIC 7770 EISA Oui pilote aic7xxx[749]Rem. Sans N/A Oui NetServer LCII (D4907A, D4909A, D5014A, D5015A, D5016A, D5969A, D5970A, D5959A, D5961A) Cirrus Logic GD 5446 PCI Oui XFree 3.3.6^[750]Rem. (SVGA) Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[751]Rem. Sans N/A Oui NetServer LC3 (D6123A, D7018A, D6125A, D7020A, D7028A, D7025A, D7126A, D8594A) Chipset BX[752]Rem. Cirrus Logic GD 5446 PCI Oui XFree 3.3.6^[753]Rem. (SVGA) Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[754]Rem. Sans N/A Oui NetServer LC2000 (D8514A, D8515A, D8519A, D8520A, D8524A, D8525A, D9162A, D9163A, D9164A, D9165A, P1802A, P1804A, P2478A, P2479A, P3493A) Chipset i820^[755]Rem. [756]Rem. ATI Rage II C AGP Oui XFree 3.3.6^[757]Rem. (Mach 64) Intel S82093A / i82559 10/100 BT Oui pilote eepro-100 2 Symbios Logic 53C897 PCI Oui pilote ncr-53c8xx[758]Rem. Sans N/A RedHat 6.2, 7.0, Mandrake 7.2 NetServer LDPro (D4944A, D4946A, D4961A, D4962A) Trident TVGA 9000i Oui XFree 3.3.6^[759]Rem. (SVGA) Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[760]Rem. Sans N/A Non NetServer LHPro (D4979A, D4980A, D4981A, D4982A) Trident TVGA 9000i Oui XFree 3.3.6^[761]Rem. (SVGA) Sans N/A 2 Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[762]Rem. Sans N/A Oui NetServer LHII (D5017A, D5953A, D5021A, D5023A, D6047A, D6048A) Trident TVGA 9000i Oui XFree 3.3.6^[763]Rem. (SVGA) Sans N/A 2 Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[764]Rem. Sans N/A Oui NetServer LH3 (D4998A, D5002A, D5000A, D5004A, D7033A, D7034A, D8503A, D8504A, D8567A, D8568A, D9343A, D9344A) Chipset BX[765]Rem. [766]Rem. Cirrus Logic GD 5446 PCI Oui XFree 3.3.6^[767]Rem. (SVGA) Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 2 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[768]Rem. Sans N/A Oui NetServer LH3000 (D8228A, D8230A, D8236A, D8238A, D8244A, D8246A, D9176A, D9178A, D9180A, D9182A, P1794A, P1796A, P2482A, P2483A) Chipset BX[769]Rem. [770]Rem. ATI Rage II C AGP Oui XFree 3.3.6^[771]Rem. (Mach 64) Intel S82093A / i82559 10/100 BT Oui pilote eepro-100 Adaptec AIC 7880 PCI + 2 Symbios Logic 53C896 PCI Oui pilote aic7xxx et pilote sym53c8xx Sans N/A RedHat 6.2, 7.0, Mandrake 7.2 NetServer LH4 (D7092A, D7093A, D7094A, D7095A, D6971A, D6972A, D6973A, D6974A, D7103A, D7104A, D8552A, D8553A, D8556A, D8557A, D8560A, D8561A, P1225A, P1227A) Chipset BX[772]Rem. [773]Rem.[774]Rem. [775]Rem. Cirrus Logic GD 5446 PCI Oui XFree 3.3.6^[776]Rem. (SVGA) Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 2 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[777]Rem. Sans N/A Oui NetServer LH6000 (D9103A, D9104A, D9107A, D9108A, D9190A, D9192A, D9194A, D9196A, P2622A, P2623A) Chipset BX[778]Rem. [779]Rem. [780]Rem. [781]Rem. ATI Rage II C AGP Oui XFree 3.3.6^[782]Rem. (Mach 64) Intel S82093A / i82559 10/100 BT Oui pilote eepro-100 Adaptec AIC 7880 PCI + 2 Symbios Logic 53C896 PCI Oui pilote aic7xxx et pilote sym53c8xx Sans N/A RedHat 6.2, 7.0, Mandrake 7.2 NetServer LPr (D6130A, D6131A, D7171A, D9133A, D9348A, D9431A, D9434A, P1736A, P1738A, P1820A, P3417A) Chipset BX[783]Rem. Cirrus Logic GD 5446 PCI Oui XFree 3.3.6^[784]Rem. (SVGA) Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[785]Rem. Sans N/A RedHat 6.2 NetServer LP1000r (P1810A, P1812A, P2465A) [786]Rem. [787]Rem. ATI Rage II C AGP Oui XFree 3.3.6^[788]Rem. (Mach 64) 2 x Intel i82559 10/100 BT Oui pilote eepro-100 2 Symbios Logic 53C1010 PCI Oui pilote sym-53c8xx[789]Rem. Sans N/A RedHat 6.2, 7.0, Mandrake 7.2, SuSE 7.0 NetServer LP1000r (P3573A) [790]Rem. [791]Rem. [792]Rem. ATI Rage II C AGP Oui XFree 3.3.6^[793]Rem. (Mach 64) 2 x Intel i82559 10/100 BT Oui pilote eepro-100 2 Symbios Logic 53C1010 PCI Oui pilote sym-53c8xx[794]Rem. Sans N/A Preload RedHat 7.0 based NetServer LP1000r (P3574A) [795]Rem. [796]Rem. [797]Rem. ATI Rage II C AGP Oui XFree 3.3.6^[798]Rem. (Mach 64) 2 x Intel i82559 10/100 BT Oui pilote eepro-100 2 Symbios Logic 53C1010 PCI Oui pilote sym-53c8xx[799]Rem. Sans N/A Preload SuSE 7.0 based NetServer LP2000r (P1824A, P1827A, P1830A, P3576A) [800]Rem. [801]Rem. ATI Rage II C AGP Oui XFree 3.3.6^[802]Rem. (Mach 64) 2 x Intel i82559 10/100 BT Oui pilote eepro-100 2 Symbios Logic 53C1010 PCI Oui pilote sym-53c8xx[803]Rem. Sans N/A RedHat 6.2, 7.0, Mandrake 7.2, SuSE 7.0 Cluster NetServer LPr (D6131A, P1133A)[804]Rem. Cirrus Logic GD 5446 PCI Oui XFree 3.3.6^[805]Rem. (SVGA) Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Symbios Logic 53C895 PCI Oui pilote ncr-53c8xx[806]Rem. Sans N/A Oui NetServer LT6000r (D9143A, D9145A, P1756A, P1758A, P2621A, P3460) Chipset BX[807]Rem. [808]Rem. [809]Rem. [810]Rem. ATI Rage II C AGP Oui XFree 3.3.6^[811]Rem. (Mach 64) Intel S82093A / i82559 10/100 BT Oui pilote eepro-100 Adaptec AIC 7880 PCI + 2 Symbios Logic 53C896 PCI Oui pilote aic7xxx et pilote sym53c8xx Sans N/A RedHat 6.2, 7.0, Mandrake 7.2 NetServer LXePro/LXPro (D4920B, D4925B, D6036A, D4311B, D4312B, D6037A, D4315B, D4958B, D6014A, D6015A, D4964B, D4898A, D6016A, D4899A, D6017A, D4900A, D6018A) Cirrus Logic GD 5424 PCI Oui XFree 3.3.6^[812]Rem. (SVGA) Sans N/A 2 Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[813]Rem. Sans N/A Non NetServer LXrPro8 (D5028A) ? ? Sans N/A Symbios logic UW ? Sans N/A Non NetServer LXr8000 (D6021A, D6022A, D6136A, D6137A, D7000A, D8256A, D8257A, D8258A, D8546A, D8548A) [814]Rem. Cirrus Logic GD 5446 PCI Oui XFree 3.3.6^[815]Rem. (SVGA) Sans N/A 2 Symbios Logic 53C896 PCI Oui pilote sym-53c8xx[816]Rem. Sans N/A Oui NetServer LXr8500 (D8540A, D8542A, D9317A, D9417A, D9418A, P1230A, P1765A, P3461A) [817]Rem. Cirrus Logic GD 5446 PCI Oui XFree 3.3.6^[818]Rem. (SVGA) Sans N/A 2 Symbios Logic 53C896 PCI Oui pilote sym-53c8xx[819]Rem. Sans N/A Non Tableau 3-10. Appliance Servers et Linux Machine Carte Graphique Prise en charge Linux Carte Réseau Prise en charge Linux Carte SCSI Prise en charge Linux Carte Son Prise en charge Linux Testée Web hosting SA1100 (P4533A) ??? ??? ??? ??? Sans N/A Sans N/A Non Web hosting SA1200 (P4533A) ??? ??? ??? ??? ??? ??? Sans N/A Non _________________________________________________________________ 3.2.1.6. Les accessoires des NetServers Le tableau suivant indique l'état de prise en charge de ces matériels par Linux. Tableau 3-11. Les accessoires des NetServers Référence Type de Carte Chipset Prise en charge Linux Testée NetRaid 1 D4992A Carte NetRaid AMI Megaraid (Raid 0, 1, 3, 5, 10, 50) Oui pilote megaraid^[820]Rem. Oui NetRaid 1Si D2140A Carte NetRaid AMI Megaraid (Raid 0, 1, 3, 5, 10, 50) Oui pilote megaraid^[821]Rem. Oui NetRaid 1M P3410A [822]Rem. Carte NetRaid AMI Megaraid (Raid 0, 1, 3, 5, 10, 50) Oui pilote megaraid^[823]Rem. Non NetRaid 2M P3411A [824]Rem. Carte NetRaid AMI Megaraid (Raid 0, 1, 3, 5, 10, 50) Oui pilote megaraid^[825]Rem. Oui NetRaid 3 D4943A Carte NetRaid AMI Megaraid (Raid 0, 1, 3, 5, 10, 50) Oui pilote megaraid^[826]Rem. Oui NetRaid 3Si D5955A Carte NetRaid AMI Megaraid (Raid 0, 1, 3, 5, 10, 50) Oui pilote megaraid^[827]Rem. Oui NetRaid 4M D9161A/D9351A Carte NetRaid Strong ARM (Raid 0, 1, 3, 5, 10, 50) Oui pilote aacraid^[828]Rem. Oui C1578B Carte SCSI Adaptec AIC 7895H PCI Oui pilote aic7xxx[829]Rem. Non C7430A Carte SCSI Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[830]Rem. Non D5025A Carte SCSI Adaptec AIC 7880 UW PCI Oui pilote aic7xxx[831]Rem. Oui D5252A Carte SCSI Adaptec AIC 7880 UWD PCI Oui pilote aic7xxx[832]Rem. Oui P3413A Carte SCSI ??? ??? Non D5013A, D5013B Carte Réseau Intel i82557 / i82558 10/100 BT (D5013A/B) Oui pilote eepro-100 Oui P3492 Carte Réseau ??? ??? Non J2585B Carte Réseau Carte 100VG (J2585B) Oui pilote hp100 Oui D6977A Carte Fibre Channel ??? ??? Non D5246A Carte Fibre Channel ??? ??? Non D8602A Carte Fibre Channel ??? ??? Non D8602B Carte Fibre Channel ??? ??? Non D6028A Carte Top Tools ??? Oui Oui _________________________________________________________________ 3.2.1.7. Informations complémentaires On se reportera aux [833]Hardware Howto et [834]Ethernet Howto pour d'autres détails concernant la prise en charge du matériel par Linux. Pour la prise en charge des chipsets vidéo, une page fondamentale est celle de l'organisme [835]XFree86 avec sa liste de [836]chipsets pris en charge. Des serveurs commerciaux sont également disponibles, comme ceux de [837]X-Inside et [838]MetroLink Les machines NecVectra ne sont pas utilisables sous Linux. Le pilote supportant les cartes HP GPIB (IEEE 488) HP 27209 (= HP 82990, HP 61062, HP 88500) et HP 82335 est disponible à l'adresse : [839]ftp://ftp.llp.fu-berlin.de/pub/linux/LINUX-LAB/IEEE488 _________________________________________________________________ 3.2.1.7.1. Remarques XFree86 La dernière version de XFree86 est la 3.3.6, disponible à partir de notre [840]miroir. Carte G100 Pour utiliser la carte MGA G100 AGP, avec une version antérieure à la 3.3.2 de XFree86, il faut utiliser une option dans le fichier XF86Config : Option "no_accel". Exemple de la section : Section "Device" [...] VendorName "Matrox" VideoRam 4096 Option "no_accel" EndSection Carte vidéo ATI Rage Mobility La résolution maximale prise en charge par ce chipset en mode frame-buffer est 800x600 en 16 bpp (vga=0x315 dans /etc/lilo.conf) Ce chipset est aussi pris en charge par XFree 3.3.6 avec le pilote Mach64 et un correctif disponible à l'adresse [841]http://www.staikos.on.ca/~staikos/tp1460/XFMa64-Rage-Think pad.patch. Un serveur X précompilé est disponible à cette adresse : [842]http://www.0wned.org/XFMa64-Rage-Thinkpad.tar.gz. Carte vidéo GD 5465 Pour utiliser la carte Cirrus Logic GD 5465 AGP, avec une version antérieure à la 3.3.3 de XFree86, il faut utiliser une option dans le fichier XF86Config : Option "xaa_no_color_exp". Exemple de la section : Section "Device" [...] Identifier "CL-GD5465" VendorName "Cirrus" BoardName "GD5465" VideoRam 2048 Option "xaa_no_color_exp" EndSection Certains utilisateurs ayant eu des problèmes avec la prise en charge de ce chipset, il peut être utile d'utiliser l'option "sw_cursor" Carte Elsa Gloria Synergy Les spécifications de la carte graphique sont à consulter sur le site Elsa. Il s'agit d'une carte disposant d'un accélérateur OpenGL matériel. Sous Linux il existe une implémentation compatible OpenGL, appelée Mesa. Cette implémentation commence à tirer parti des accélérateurs matériels, et entre autre du chipset 3DLabs qui équipe les cartes Elsa Gloria. + [843]Site Web d'Elsa + [844]Site Web sur OpenGL + [845]Site Web sur Mesa Carte Silicon Motion LynxE Cette carte n'est prise en charge qu'à partir de la version 3.3.6 de XFree86. Néanmoins, même dans cette version, cela reste préliminaire, et n'offre pas toute la stabilité du mode Frame Buffer. D'autre part, pour pouvoir s'effectuer correctement l'installation de la RedHat 6.1 doit être effectuée en mode texte, car le serveur fourni (3.3.5) ne prend pas cette carte en charge. Si vous disposez d'un dual-boot sur cette machine, le fait d'amorcer d'abord Windows, et d'initialiser la carte par son pilote semble améliorer le fonctionnement ensuite sous Linux (réamorçage à chaud). Les versions d'XFree86 supéreures à 4.0.2 offrent également la prise en charge de ce chipset. Carte Intel i810/i815 (Informations fournies par Frédéric Dubuy <[846]F.Dubuy@atrid.fr>, Anne-Marie Mahfouf <[847]a-m.mahfouf@lineone.net> et Jean-Bernard Chaffardon <[848]Jean-Bernard_Chaffardon@hp.com>) Ces cartes ne sont prises en charge qu'avec un serveur X spécifique XFCom_i810/5 téléchargeable au format [849]RPM ou [850]tar.gz et un module complémentaire pour le noyau agpgart, téléchargeable au format [851]SRPM ou [852]tar.gz (old). Des documentations détaillées sur l'installation sont fournies aux adresses [853]http://www.linux-france.org/article/x/GuideIntel810/book1. html et [854]ftp://download.intel.com/support/graphics/intel815/release _linux.pdf En résumé, une fois le serveur X installé, le module compilé et installé, il suffit de modifier de la façon suivante le fichier /etc/X11/XF86Config : Section "Device" [...] Identifier "i810" [...] EndSection [...] Section "Screen" [...] Driver "svga" Device "i810" [...] EndSection Il est à noter que le module agpgart livré par Intel doit se substituer à celui fourni dans le noyau pour que ceci fonctionne. Il faut dont le réinstaller, en particulier lors d'une mise à jour du noyau. Carte S3 Savage 4 Cette carte n'est prise en charge qu'avec un serveur X spécifique téléchargeable à l'adresse [855]ftp://ftp.s3.com/pub/s3/desktop/395/395_xf86_1011.tar.gz Pour l'installation se reporter à ce [856]document Frame Buffer Pour utiliser le mode Frame Buffer, veuillez consulter les documents [857]http://www.medasys-digital-systems.fr/linux/framebuffer.ht ml et [858]http://www.medasys-digital-systems.fr/mirror/linux/french/ ldp/HOWTO/Framebuffer-HOWTO.html. Aic7xxx La dernière version du pilote aic7xxx est disponible à partir du [859]site de référence. Ncr53c8xx La dernière version du pilote ncr53c8xx est disponible à partir du [860]site de référence. Une disquette de pilote (driver disk) pour la distribution RedHat est disponible à l'adresse suivante pour les versions [861]6.2 et [862]7.0. Carte D6692A Pour utiliser la carte D6692A, il faut faire appel à un noyau 2.1.122 au minimum. En effet, les noyaux précédents ne géraient pas correctement l'IRQ partagée entre la partie réseau et la partie SCSI de cette carte. Notamment, une version RedHat 5.2 standard ne permet pas au réseau d'être reconnu. Il faut mettre à jour la version avec un noyau récent (de préférence 2.4.3) et les paquetages complémentaires nécessaires. 3C59x La dernière version du pilote 3c59x est disponible à partir du [863]site de référence. Il existe également une version fournie et supportée par 3Com, disponible à l'adresse [864]http://support.3com.com/infodeli/tools/nic/linuxdownload.h tm. D'autres drivers sont également disponibles aux adresses [865]ftp://ftp.scyld.com/pub/network/test/3c59x.c et [866]http://www.uow.edu.au/~andrewm/linux/#3c59x-bc. 3C556 Cette carte est prise en charge à partir des noyaux 2.2.17. Chipset son ESS Maestro Le chipset 2EM (Vendor id: 125d - device id: 1978) est pris en charge à partir du noyau 2.2.14. La version 3 (Vendor id: 125d - device id: 1998) en revanche n'est prise en charge à partir du noyau 2.2.19pre5. Cf : le site du pilote [867]maestro3, , dans le projet Alsa^[868]Rem. (version >= 0.5.10) , et dans le logiciel commercial [869]Open Sound System . La dernière version du pilote ESS Maestro est disponible à partir du [870]site de référence. Chipset son AD1816 La dernière version du pilote AD1816 est disponible à partir du [871]site de référence. Pour les stations Visualize, il est conseillé par HP de mettre dans /etc/conf.modules : alias sound ad1816 pre-install sound /sbin/insmod sound dmabuf=1 options ad1816 io=0x500 irq=5 dma=0 dma2=3 ad1816_clockfreq=33000 alias midi opl3 options opl3 io=0x388 (Source : [872]http://www.hp.com/visualize/support/technotes/linux) Pilotes son Alsa Le projet Alsa a pour but de développer des pilotes pour la prise en charge des cartes son sous Linux, qui soient compatibles avec les pilotes OSS actuels, apportant plus de fonctionnalités, et couvrant plus de matériels. Toutes les informations sur ce projet, ainsi que les sources en licence GPL, sont disponibles à partir de leur page d'accueil [873]http://www.alsa-project.org Des RPMs pour la version 6.2 de la distribution RedHat et 6.0 de la distribution Turbo Linux sont disponibles à l'adresse [874]http://hp-linux.org/aau/alsa Modèle DOS Ces modèles sont livrés avec le seul MS-DOS, pour permettre d'avoir une machine Linux au meilleur coût. Modèle Turbo Linux Ces modèles sont livrés prêts à installer avec Turbo Linux, ce qui permet d'avoir une machine Linux au meilleur coût (2 CDs + support 30 jours). XU800 Sur cette machine, le bios ne passe pas correctement la quantité de mémoire dont est équipée la machine à Linux. Il faut donc utiliser une ligne du type append="mem=xxxM" au début du fichier /etc/lilo.conf où xxx est votre quantité de mémoire vive en Mo. La prise en charge de disques IDE de "grande taille" (par exemple les disques 27 Go qui équipent les XU 800) sur ces machines nécessite un noyau 2.2.15 minimum. Omnibook XE Si vous comptez utiliser à la fois le son et une carte PCMCIA dans ce portable, de manière à éviter les conflits sur les ports d'entrée/sortie, il vous faudra modifier le fichier /etc/pcmcia/config.opts pour y changer la ligne 6 en include port 0x300-0x4ff, port 0x1000-0x17ff Le chipset NSC PC87108/338 contrôlant l'IrDA sur ce modèle est pris en charge par le noyau 0.93 (Source : [875]http://www.bits.bris.ac.uk/madmatt/laptop.shtml) Certains utilisateurs ont eu recours à la même manipulation pour leur Omnibook 4150 avec succès. Omnibook XE3 Il est conseillé de ne pas lancer la commande /sbin/halt depuis X11. La carte modem intégrée ne fonctionne pas sous Linux (ESS ES56CVM-PL). L'installation d'une distribution RedHat 6.2 pose un problème lors du réamorçage du système sur le lancement du PCMCIA. Il faut utiliser la dernière version du paquetage pcmcia-cs à l'adresse : [876]ftp://pcmcia-cs.sourceforge.net/pub/pcmcia-cs/ Pour faire fonctionner le réseau, il faut un pilote tulip modifié par notre pingouindor P. Depouilly et disponible à cette adresse [877]http://www.math.u-bordeaux.fr/~depouill/XE3/tulip.tar.gz Modèle RedHat Ces modèles sont livrés préinstallés avec une distribution améliorée basée sur RedHat (pub honteuse, j'ai commis ce forfait :-). LC 2000 Pour utiliser le SCSI natif de cette machine, il est nécessaire de désactiver dans le Bios l'option "Reserve PCI Bus Numbers" dans le menu PCI Device Setting. (Indication de GILLYNN COUCH) LP1000r/LP2000r Pour utiliser le SCSI natif de cette machine, il est nécessaire d'utiliser le pilote sym53c8xx dans une version supérieure à 1.6c. Une disquette pilote est disponible pour les distributions RedHat [878]6.2 et [879]7.0. Pour la distribution SuSE 7.0 il faut utiliser le mode manuel pour charger le pilote, car l'autodétection ne s'efectue pas correctement. LH 6000 Pour utiliser le SCSI natif de cette machine, il est nécessaire de procéder à la désactivation dans le Bios du "Hotadd reserved resources" dans le menu PCI Device Setting. Le système PS/2 ne fonctionne pas correctement avec une distribution type RedHat 6.1 ou 6.2. Il faut pour ce faire soit placer la machine en mode MPS 1.1, via le BIOS, soit utiliser un noyau de version supérieure à 2.3.47 en mode MPS 1.4. La carte réseau n'est pas opérationnelle avec le noyau de la distribution RedHat 6.2. LT 6000r Pour utiliser le SCSI natif de cette machine, il est nécessaire de procéder à la désactivation dans le Bios du "Hotadd reserved resources" dans le menu PCI Device Setting. BX Chipset Le chipset BX d'Intel (prise en charge Bus mémoire à 100MHz) est pris en charge par Linux à partir des [880]noyaux 2.0.34/2.1.103. i820 Chipset Technologie Coppermine 0.18 µm - 256 ko cache synchrone - Chipset Intel i820 P4 - i850 Chipset Ces machines sont équipées d'un Pentium IV, pris en charge par les noyaux 2.2.18/2.4.0 ou supérieur. Les distributions RedHat 7.0 et TurboLinux 6.1, par exemple, s'installent correctement sur ce type de machine. BAx Attention, le serveur XF86_SVGA ne fonctionne correctement avec cette version implantée sur carte mère qu'à partir de la version 3.3.5, du fait de l'utilisation de fréquences différentes (Utiliser notamment les updates pour les RedHat 5.2/6.0). Disquette de Boot pour carte 3Com Création d'une disquette de boot RedHat 5.1 adaptée Pour pouvoir booter avec la disquette de boot de la RedHat 5.1 et avoir une reconnaissance de la carte 3C905B-TX il faut effectuer les opérations suivantes : # Se connecter en tant que root. Se placer dans son répertoire d'accueil (~root ) #cd ~ # Y récupérer le source 3c59x.c du module de la carte 3Com #ncftp ftp://ftp.medasys-digital-systems.fr/pub/linux/networking/drivers/3c59x. c # Le compiler #gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c 3c59x.c `[ -f /usr/ include/linux/modversions.h ] && echo -DMODVERSIONS` # mettre la disquette Boot RedHat 5.1 dans le lecteur de disquette. # Il faut copier le fichier initrd.img de la disquette #mcopy a:initrd.img /tmp # Puis le décompresser #gzip -cd /tmp/initrd.img > /tmp/initrd.ext2 # Monter le système de fichiers "fichier" ainsi obtenu #mount -t ext2 /tmp/initrd.ext2 /mnt/floppy -o loop # décompresser les modules fournis #gzip -cd /mnt/floppy/modules/modules.cgz > /tmp/modules.cpio # extraire les modules #cd /tmp ; mkdir modules ; cd modules ; cat /tmp/modules.cpio | cpio -i # Copier le nouveau module à jour pour la carte 3Com. #cp ~/3c59x.o . # recréer le fichier cpio compressé #ls | cpio -o | gzip -c9 > ../newmodules.cgz # remplacer les modules par la mise à jour #cp ../newmodules.cgz /mnt/floppy/modules/modules.cgz # démonter le système de fichiers "fichier" #umount /mnt/floppy # compresser le système de fichiers "fichier" #gzip -c9 /tmp/initrd.ext2 > /tmp/initrd.img # le copier sur la disquette #mcopy /tmp/initrd.img a: Disquette de Boot/Pilote pour distribution RedHat Pour pouvoir booter une distribution RedHat (>6.1) et avoir une reconnaissance d'un périphérique non pris en charge par la distribution en standard, il faut effectuer les opérations suivantes : Télécharger l'outil de développement de disquette de pilote pour la distribution RedHat à l'adresse suivante : [881]http://people.redhat.com/dledford Installez les sources du pilote dans un répertoire et suivez les indications du fichier README du kit pour créer les modules nécessaires pour les divers noyaux des distributions. # Se connecter en tant que root. (~root) # mettre la disquette de Boot RedHat à modifier dans le lecteur de disquette. # Il faut copier le fichier initrd.img de la disquette #mcopy a:initrd.img /tmp # Puis le décompresser #gzip -cd /tmp/initrd.img > /tmp/initrd.ext2 # Monter le système de fichiers "fichier" ainsi obtenu #mount -t ext2 /tmp/initrd.ext2 /mnt/floppy -o loop # créer un répertoire de travail #cd /tmp ; mkdir modules ; cd modules # décompresser et extraire les modules fournis #gzip -cd /mnt/floppy/modules/modules.cgz | cpio -ivdum # Copier le nouveau module à jour. En cas d'ajout effacer d'autres modules inut iles de taille équivallente #cp ~/.../mod_devel_kit/rhxx/modules/x.y.z-iBOOT/module.o x.y.z-iBOOT # Toujours en cas d'ajout, copier également les modules devant servir au noyau installé lors du reboot, et adaptez les fichiers pcitable, module-info et modul es.dep en utilisant les informations du kit de développement #cp -a ~/.../mod_devel_kit/rhxx/modules/x.y.z-i ~/.../mod_devel_kit/rhxx/module s/x.y.z-ismp . #vi /mnt/floppy/modules/pcitable /mnt/floppy/modules/module-info /mnt/floppy/mo dules/modules.dep # recréer le fichier cpio compressé #find * -print -depth | cpio -ov -H crc | gzip -c9 > /mnt/floppy/modules/module s.cgz # démonter le système de fichiers "fichier" #umount /mnt/floppy # compresser le système de fichiers "fichier" #gzip -c9 /tmp/initrd.ext2 > /tmp/initrd.img # le copier sur la disquette #mcopy /tmp/initrd.img a: LH 4 Le LH4 ne semble pas fonctionner correctement en mode non-Raid. Même avec les derniers Bios disponibles au moment du test (16.00), le problème subsiste. Si on désactive la gestion du Raid, lors du boot, le pilote ncr53c8xx de Linux détecte 4 contrôleurs au lieu de 2 et le boot part en boucle. Pour contourner ce problème, il faut activer le Raid dans le Bios et utiliser chacun des disques en mode Raid0, ce qui revient sensiblement au même que la solution sans Raid du tout. Carte NetRaid Ces cartes sont équipées du chipset [882]AMI Megaraid et peuvent effectuer les niveaux de Raid 0, 1, 3, 5, 10, 30 et 50. Certaines des cartes NetRaid, ainsi que le jeu de composants intégrés aux cartes mères des LH3 et LH4 sont pris en charge par les versions récentes de noyau Linux (en 2.0.36/2.2.19/2.4.3 typiquement - ne pas utiliser 2.0.37/38). Pour la distribution RedHat 5.2, il n'est pas possible d'installer le système sur ce type de contrôleur, car il n'est pas détecté par le processsus d'installation. Il faut dans ce cas utiliser une [883]disquette spécifique. Cette disquette doit être utilisée en entrée de l'outil rawrite, par exemple. Elle convient pour les systèmes disposant de moins de 1 Go de mémoire vive. Pour la distribution RedHat 6.0, il faut déclarer l'existence de cette carte manuellement comme adaptateur SCSI supplémentaire, de façon à pouvoir l'utiliser directement lors de l'installation. Le pilote megaraid n'est en effet pas détecté automatiquement. Pour éliminer les messages bizarres affichés à l'amorçage par le pilote megaraid, il est nécessaire de le compiler en spécifiant l'option -DHP (avant le noyau 2.4.2) ou -DMEGA_HP_FIX (après). Pour la distribution RedHat 6.1, le pilote megaraid du noyau fourni ne prend en charge que la première unité logique déclarée. Pour obtenir les suivantes, veuillez recompiler un noyau 2.4.3 standard. Il est à noter que la carte intégrée des LH3/LH4 réalise le calcul de parité de façon logicielle et est donc moins performante que les cartes filles NetRaid. En revanche, les LH3000/6000 disposent d'une carte intégrée effectuant le calcul de façon matérielle. Dans la livraison du pilote fourni par AMI se trouve un outil de gestion du Raid megamgr, utilisable depuis Linux, équivalent à l'outil inclut dans le logiciel embarqué avec le contrôleur. Il est téléchargeable depuis l'adresse [884]http://www.ami.com/support/prodsearch.cfm?InpProdID=17 En cas de problème, une version est disponible [885]ici. Modèle NetRaid 1M/2M En plus de ce qui est mentionné ci-dessus, ces modèles nécessitent une version 1.14 du pilote megaraid pour fonctionner correctement. Vous pouvez trouver une version des sources de ce pilote [886]ici. Une disquette de pilote (driver disk) pour la distribution RedHat est disponible à l'adresse suivante pour les versions [887]6.2 et [888]7.0. Carte NetRaid 4M Ces cartes sont équipées d'un chipset StrongARM et correspondent à la carte Adaptec AAC-3642. Un pilote est disponible à l'adresse [889]http://domsch.com/linux. La distribution RedHat 7.0 contient en standard ce pilote, même si cette version de noyau ne le prend pas en charge normalement. Des informations sont également disponibles sur le Navigator L.199.00. Second bus IDE Sur ces machines, quand le second bus IDE est vérifié par le noyau, il y a un temps d'attente, non préjudiciable, mais inutile. Pour l'éviter, ajoutez simplement à votre lilo.conf la ligne suivante : append="ide1=noprobe" Processeurs Pour désactiver des processeurs sur un serveur Linux, il suffit de passer une option au noyau lors de l'amorçage de la machine du type : Lilo boot: linux maxcpus=3 où le nombre de processeurs donné en option est inférieur de 1 au nombre de processeurs voulu. Par exemple, ici on active 4 processeurs. Cluster de haute disponibilité Pour utiliser un cluster haute disponibilité sous Linux, il faut avoir recours à des logiciels complémentaires tels que : + [890]RSF-1 (Commercial) + [891]Projet Linux-HA (Libre) et [892]ext3 Claviers Multimedia Certains des PCs fournis par HP sont équipés de claviers multimédia. Vous pouvez faire usage des touches additionnelles grâce au démon HotKeys (Cf:[893]http://freshmeat.net/projects/hotkeys/) _________________________________________________________________ 3.2.2. La gamme des moniteurs HP Le tableau suivant indique l'état de prise en charge de ces matériels par XFree86. Tableau 3-12. Moniteurs HP et Linux Référence Désignation F Vert. (Hz) F Hor. (kHz) Bande (MHz) Résol. Freq. (Hz) Testée D2825A, D2825S 15" HP Ultra VGA 1024 50-110 31-54 65 640x400, 640x480, 800x600, 1024x768 70, 60-72-75-85, 60-72-75-85, 60 Oui D2826A, D2826S 15" HP 50 50-120 31-54 65 640x400, 640x480, 800x600, 1024x768 70, 60-75-85, 60-75-85, 60 Oui D2827A 15" HP 51 50-120 31-54 ??? ??? ??? Non D2828A 15" HP 52 50-120 30-54 65 640x400, 640x480, 800x600, 1024x768 70, 60-75-85, 60-75-85, 60 Non D8897A 15" HP 55 ??? 30-54 ??? ??? ??? Non D2832A 15" HP M500 50-120 30-70 110 640x400, 640x480, 800x600, 1024x768, 1280x1024 70, 60-75-85, 72-75-85, 70-75-85, 60 Non D2807A 17" Ultra 1280 50-160 30-64 ??? ??? ??? Oui D2837A 17" HP70 50-120 30-70 110 640x400, 640x480, 800x600, 1024x768, 1280x1024 70, 75-85, 75-85, 75-85, 60 Oui D2838A 17" HP M700 50-160 30-86 ??? ??? ??? Non D8906A 17" HP P700 50-160 30-86 140 ??? ??? Non D2840A 17" Ergo 1280 50-150 31-92 160 512x384, 640x480, 800x600, 1024x768, 1152x864, 1280x1024, 1440x1080, 1600x1200 85, 100, 100, 100, 100, 85, 72, 60 Oui D8901A, D8902A 17" HP71 50-120 30-60 110 640x400, 640x480, 800x600, 1024x768, 1280x1024 70, 60, 75-85, 75-85, 60 Non D8904A, D8905A 17" HP72 ??? ??? ??? ??? ??? Non D8900A 17" HP75 50-160 30-86 (30-64 real) 150 640x400, 640x480, 800x600, 1024x768, 1280x1024 70, 60-75-85, 75-85, 75-75-85, 75 Oui D2842A, D2842W 19" HP90 50-200 30-96 203 640x400, 640x480, 800x600, 1024x768, 1280x1024, 1600x1200 70, 75-85, 75-85, 75-85, 75-85, 75 Oui D8910A 19" HP P910 50-150 29-107 230 640x400, 640x480, 800x600, 1024x768, 1280x1024, 1600x1200 70, 60-85, 85, 75-85, 75-85, 75-85 Non D8911A 19" HP91 ??? 30-96 ??? ??? ??? Non D8912A 19" HP P920 ??? ??? ??? ??? ??? Non A4031A 20" 48-150 30-82 ??? ??? ??? Oui D2846A, A4576A 21" HP P1100 50-160 30-107 ??? ??? ??? Non D2847A 21" P1110 50-180 29-121 300 ??? ??? Oui D8915A 21" P1120 ??? 30-121 ??? ??? ??? Oui A4033A 21" 50-120 30-80 ??? ??? ??? Oui A1295A 24" Wide Aspect 50-160 30-96 ??? ??? ??? Non D5061A 15,1" LCD HP ??? ??? N/A ??? ??? Non D5062A 15" LCD HPL1510 ??? ??-75 N/A ??? ??? Non D5065A 18,1" LCD HP L1800 56-85 30-80 N/A 640x350, 640x480, 720x400, 800x600, 832x624, 1024x768, 1152x870, 1152x900, 1280x1024 70, 60-75-85, 70, 60-75-85, 75, 60-75-85, 75, 66, 60-75 Oui D5069A, D5069C, D5069J, D5069L 18" LCD HPL1800 ??? ??-75 N/A ??? ??? Non _________________________________________________________________ 3.2.3. La gamme informatique basée sur des processeurs PA-Risc La gamme PA-Risc est architecturée autour d'un processeur conçu et réalisé par HP. Les premières versions remontent à 1987. Les versions actuelles sont dénommées PA-8000 (8200, 8500, ...). HP a annoncé en début 1999 son intention de contribuer au portage de Linux sur son architecture PA-Risc. Ce portage est un portage natif, à la différence d'un projet précédent ayant utilisé MkLinux sur des machines à base de PA-7200. Le travail est en cours avec [894]The Puffin Group racheté par Linuxcare et des informations plus précises de l'état d'avancement peuvent être consultées sur le [895]site Web officiel. En particulier, des points de départ utiles peuvent être trouvé sur [896]http://www.parisc-linux.org/faq.html et [897]http://www.parisc-linux.org/hw.html. Consultez aussi le site de l'ESIEE qui participe activement au portage : [898]http://mkhppa1.esiee.fr/fr/ D'après Grant Grundler (05/12/2000) : "Dernières infos: Linux parisc 32 bits s'amorce et fonctionne quasiment sur la plupart des stations et serveurs. Les recompilations natives fonctionne de même que le réseau et le SCSI. L'environnement utilisateur est en cours de réalisation à la fois pour Debian (.debs) et RedHat (.rpms). Linux parisc 64 bits arrive à une invite de connexion sur A500, mas n'est pas très utile encore. De nombreux appels système ne fonctionnent pas et le sous-système d'entrées/sorties n'est pas stable. J'espère que le mode 64 bits sera mieux qu'en qualité beta pour la fin du premier trimestre 2001. Les premières machines concernées par ce portage sont les serveurs Class A et L. Le portage devrait être opérationnel mi 2001. Des tests se font également sur des 712 et 715. D'autres personnes commencent également à travailler sur des machines PA-2.0. Le dernier état du portage est consultable à l'adresse [899]http://www.parisc-linux.org/status.html. Il existe d'autre part pour ces machines un projet Linux basé sur le micro noyau MkLinux. Ce projet a été développé au sein de l'OSF. Le site Web qui mentionne des informations se trouve à l'adresse [900]http://www.gr.opengroup.org/mklinux/hppa/mkpa-rel.html. Des liens sur d'autres portages parisc sont disponibles sur [901]http://parisc.workstations.org/. _________________________________________________________________ 3.2.4. La gamme IA-64 HP développe en collaboration avec Intel une nouvelle génération de processeurs 64 bits appelée IA-64. Le premier processeur de cette nouvelle génération, baptisé Itanium devrait voir le jour mi 2001. Le portage initial de Linux sur IA-64 a été rendu public le 2 février 2000 et les sources du projet sont accessibles à l'adresse [902]ftp://ftp.kernel.org/pub/linux/kernel/ports/ia64. C'est l'endroit des sources les plus à jour pour ce projet. Plus d'informations sur ce sujet peuvent être consultées sur cette page des laboratoires HP : [903]http://devresource.hp.com/devresource/Topics/IA64/IA64.html et [904]http://www.hpl.hp.com/techreports/index.html ou sur le site de référence [905]http://www.linuxia64.org HP, en tant que membre fondateur du projet IA-64 Linux, travaille sur le portage du noyau, de la version préliminaire de gcc, de gas, ld et emacs. Une autre contribution fondamentale d'HP à ce projet est la mise à disposition d'un kit de développement logiciel disponible à l'adresse [906]http://www.software.hp.com/ia64linux. Il permet développer des applications aussi bien que du code noyau sur Linux/IA32 pour plateforme IA64 et surtout de les tester grâce à un simulateur. _________________________________________________________________ 3.2.4.1. La gamme des serveurs IA64 Les tableaux suivants indiquent l'état de prise en charge de ces matériels par Linux : Tableau 3-13. HP IA-64 Servers et Linux Machine Carte Graphique Prise en charge Linux Carte Réseau Prise en charge Linux Carte SCSI Prise en charge Linux Carte Son Prise en charge Linux Testée MX4000r ATI Rage 128 AGP 8Mo Oui XFree 3.3.6^[907]Rem. (Mach 64) Intel S82093A / i82559 10/100 BT Oui pilote eepro-100 Qlogic Ultra3 Wide PCI Oui pilote qla1280 Sans N/A Oui _________________________________________________________________ 3.2.4.2. Informations complémentaires Pour amorcer Linux sur ce type de machine, il faut taper dans l'environnement initial >eli linux _________________________________________________________________ 3.2.5. La gamme informatique des terminaux X La gamme des terminaux X HP (Entria, Envizex) est utilisable avec un serveur Linux. De plus, un serveur Linux peut être le serveur d'amorçage par défaut de terminaux X. Pour ce faire, un certain nombre d'opérations est nécessaire. Admettons que l'on dispose d'une machine HP-UX nommée hpux, sur laquelle est instalé Enware, d'un serveur Linux nommé linux et d'un terminal X d'adresse Ethernet 08:00:09:db:8d:1c. La passerelle du réseau est à l'adresse IP 192.168.1.254, le serveur de nom du réseau est à l'adresse IP 192.168.1.1. Les commandes à effectuer sont : hpux #cd /opt/hpxt/enware/xthome # Répertoire d'accueil d'Enware hpux #tar cvf ~ftp/en.tar * .??* # Création d'une archive tar de ce logiciel linux #ftp hpux Connected to hpux. 220 hpux FTP server (Version wu-2.5.0(1) Wed Aug 25 12:50:08 EDT 1999) ready. Name (ftp:Root):ftp 331 Password required for ftp. Password:(type your mail address here) 230- [...] 230- 230 User ftp logged in. Access restrictions apply. ftp>lcd /tmp Local directory now /tmp ftp>get en.tar 200 PORT command successful. 150 Opening ASCII mode data connection for en.tar (57638340 bytes). 226 Transfer complete. 57638340 bytes received in [...] ftp>quit [...] # Récupération de l'archive tar linux #mkdir -p /tftpboot # Création du répertoire cible sur la machine linux linux #cd /tftpboot # Y aller linux #tar xvf /tmp/en.tar # Extraction de l'archive tar linux #/usr/X11R6/bin/xfs -port 7100 # Exécution d'un serveur de polices sur le port 7100 linux #cat >> /etc/bootptab << EOF global.prof:\ :sm=255.255.255.0:\ :ds=192.168.1.1:\ :gw=192.168.1.254:\ :ht=ethernet:\ :bf=bin/C3253A: # Adjust to your terminal tx1:hd=/tftpboot:tc=global.prof:ha=080009db8d1c:ip=192.168.1.100: EOF # Création du fichier de configuration de bootpd linux #rpm -Uvh bootp-2.4.3-7.i386.rpm # Installez bootpd depuis, par exemple, [908]http://rpmfind.net # Vérifiez la présence d'une ligne de ce style dans /etc/inetd.conf, et redémar rez éventuellement le serveur par killall -1 inetd bootps dgram udp wait root /usr/sbin/tcpd bootpd # Maintenant profitez de votre terminal X en l'amorçant Pour une description plus détaillée, ainsi qe le logiciel relatif à cette manipulation, consultez également la page [909]http://www.cb3rob.net/~sven/xterm. _________________________________________________________________ 3.2.6. La gamme des produits d'impression 3.2.6.1. Généralités Les imprimantes peuvent être connectées à une machine soit directement via un port parallèle (le plus souvent), soit par un port série, soit (plus récemment) par un port USB. Elles peuvent aussi être directement raccordées au réseau, pour un accès global ; ceci est réalisé par une carte insérée dans un logement de l'imprimante, ou par une connexion via le port parallèle de l'imprimante à un boîtier de partage réseau. HP dispose de tels boîtiers, appelés JetDirect, qui permettent donc de partager des imprimantes personnelles sur le réseau, directement, sans passer par une machine. Ils existent pour des topologies de réseau différentes (10 BT, 10/100 BT, Localtalk, 10B2) et offrent une possibilité d'accès à l'imprimante directement depuis des machines qui comme Linux prennent en charge le protocole LPD en utilisant une imprimante distante dans le fichier /etc/printcap . Le nom de la file à utiliser est alors raw. Un exemple de fichier /etc/printcap permettant d'accéder à une imprimante, équipée d'un tel boîtier ou carte, nommée lj4000 sur le réseau est fourni ci-dessous : # REMOTE POSTSCRIPT 1200x1200 a4 {} PostScript Default {} lj4000:\ :sd=/var/spool/lpd/lj4000:\ :rm=lj4000:\ :rp=raw:\ :if=/var/spool/lpd/lj4000/filter:\ :mx#0:\ :sh: L'accès aux boîtiers pour leur configuration s'effectue, soit par l'outil WebJetAdmin , fourni maintenant également sous Linux, soit par la commande telnet . L'adresse par défaut de ces produits est 192.0.0.192. Pour s'y connecter initialement, il suffit d'ajouter un alias IP sur son interface réseau, typiquement par : #ifconfig eth0:0 192.0.0.1 et une route vers ce réseau (si elle n'est pas automatiquement créée) typiquement par : #route add -net 192.0.0.0 L'accès à l'équipement s'effectue ensuite simplement par : #telnet 192.0.0.192 Veillez à n'avoir qu'un seul équipement de ce type en même temps sur le réseau, faute de quoi vous auriez des duplications d'adresses IP, ce qui cause toujours quelques soucis. Notez que les équipements réseau HP administrables utilisent la même adresse par défaut. La lecture du [910]IP Alias mini HOWTO peut être judicieuse si vous ne comprenez pas le paragraphe précédent :-). Il est bien entendu possible d'accéder via le réseau à une imprimante HP rattachée et déclarée directement sur une machine Linux, via le service lpd pour les autres clients Unix, via [911]SaMBa pour les clients de systèmes Microsoft (Win9x ou WinNTx) ou via [912]NetAtalk pour les clients MacIntosh. Enfin, [913]SaMBa offre un outil, smbclient, qui permet d'imprimer depuis une machine Unix/Linux sur une imprimante raccordée directement sur un PC sous système Microsoft, sans avoir besoin d'utiliser le système JetDirect. Tous les détails utiles pour réaliser cette opération sont décrits dans le fichier d'exemple smbprint fourni avec le paquetage [914]SaMBa et sur la page [915]http://www.medasys-digital-systems.fr/linux/samba-truc.html. La communication entre une machine Linux et une imprimante nécessite aussi, outre un dialogue au niveau réseau, une entente au niveau langage d'échange entre les deux constituants. Il existe de nombreux langages de ce type, tels que le PCL, Postscript ou HPGL. Pour pouvoir imprimer correctement, il faut donc que l'outil produisant les données à imprimer sache générer le code compris par l'imprimante. Des filtres existent, qui permettent de transformer facilement une sortie d'un format donné en une sortie d'un autre format. Ainsi, le logiciel [916]Ghostscript autorise la transformation de source Postscript en tout un ensemble de formats de sortie, comme indiqué par son invocation à la rubrique 'Available devices' : #gs -h GNU Ghostscript 5.10 (1998-12-17) Copyright (C) 1997 Aladdin Enterprises, Menlo Park, CA. All rights reserved. Usage: gs [switches] [file1.ps file2.ps ...] Most frequently used switches: (you can use # in place of =) -dNOPAUSE no pause after page | -q `quiet', fewer messages -gx page size in pixels | -r pixels/inch resolution -sDEVICE= select device | -dBATCH exit after last file -sOutputFile= select output file: - for stdout, |command for pipe, embed %d or %ld for page # Input formats: PostScript PostScriptLevel1 PostScriptLevel2 PDF Available devices: x11 x11alpha x11cmyk x11gray2 x11mono ap3250 imagen iwhi iwlo iwlq la50 la70 la75 la75plus lbp8 ln03 lj250 lj4dith lp2563 m8510 necp6 oce9050 r4081 sj48 st800 stcolor t4693d2 t4693d4 t4693d8 tek4696 xes deskjet djet500 djet500c dnj650c laserjet ljetplus ljet2p ljet3 ljet3d ljet4 cdeskjet cdjcolor cdjmono cdj500 cdj550 paintjet pj pjxl pjxl300 uniprint bj10e bj200 bjc600 bjc800 epson eps9mid eps9high epsonc ibmpro jetp3852 dfaxhigh dfaxlow faxg3 faxg32d faxg4 cp50 pcxmono pcxgray pcx16 pcx256 pcx24b pcxcmyk pbm pbmraw pgm pgmraw pgnm pgnmraw pnm pnmraw ppm ppmraw tiffcrle tiffg3 tiffg32d tiffg4 tifflzw tiffpack tiff12nc tiff24nc psmono psgray bit bitrgb bitcmyk pngmono pnggray png16 png256 png16m jpeg jpeggray pdfwrite pswrite epswrite pxlmono pxlcolor nullpage Search path: . : /usr/share/ghostscript/5.10 : /usr/share/fonts/default/ghostscript : /usr/share/fonts/default/Type1 For more information, see /usr/doc/ghostscript-5.10/use.txt. Report bugs to ghost@aladdin.com; use the form in bug-form.txt. Ceci ne représente que les divers formats de sortie compilés dans le programme. D'autres sont également disponibles. On peut trouver une liste complète de toutes les imprimantes reconnues par ce logiciel à l'adresse [917]http://www.cs.wisc.edu/~ghost/printer.html. Une liste de l'état de prise en charge des imprimantes HP peut être obtenue sur les pages suivantes : [918]http://www.linuxprinting.org/printer_list.cgi?make=HP et[919]http://hp.sourceforge.net/. HP a publié en Avril 2001 des pilotes améliorés pour les imprimantes jet d'encre. Cf: [920]http://hpinkjet.sourceforge.net/. _________________________________________________________________ 3.2.6.2. Codes de Contrôle Les imprimantes jet d'encre et laser peuvent être pilotée par l'intermédiaire de code de contrôle. Le tableau ci-dessous en recense certains : Tableau 3-14. Codes de Contrôle des imprimantes Code Fonction ESC&l1H Bac 2 ESC&l2H Alimentation manuelle, papier ESC&l3H Alimentation manuelle, enveloppe ESC&l4H Bac 1 ESC&l5H Bac 3 ESC&l7H Sélection automatique ESC&l0O Mode Portait ESC&l1O Mode Paysage ESC&l5A A4 ESC(8U HP Roman 8 ESC(10U IBM PC-8 (CP437) ESC(12U IBM PC-850 (CP850) _________________________________________________________________ 3.2.7. La gamme des tout en un Ces produits réunissent plusieurs fonctions : impression (tous), numérisation (tous), copie (tous) et fax (certains). Plus d'informations à partir du site qui leur est dédié : [921]http://hpoj.sourceforge.net/suplist.shtml _________________________________________________________________ 3.2.8. La gamme des produits de numérisation 3.2.8.1. La gamme des scanners (ScanJet) Le principal outil disponible en environnement Linux pour la gestion des scanners est [922]SANE (Scanner Access Now Easy). Ce logiciel fournit en particulier un pilote pour la gestion des scanners HP : [923]hpbackend. Le tableau suivant indique l'état de prise en charge de ces matériels par Linux. Tableau 3-15. Scanners et Linux Référence Scanner Interface Prise en charge Linux Testée C9195A ScanJet Plus HP Parallel Interface Card [924]SANE et [925]pilote Non C1750A ScanJet IIc SCSI [926]SANE Non C2500A, C2507A, C2508A, C2509A ScanJet IICX SCSI [927]SANE Non C1790A, C1797A, C1798A, C1799A ScanJet IIP SCSI [928]SANE Non C2520A, C2527A, C2528A, C2529A ScanJet 3C SCSI [929]SANE Non C2570A ScanJet 3P SCSI [930]SANE Non C2520B, C2527B, C2527D, C2528B, C2529B ScanJet 4C SCSI [931]SANE Non C1130B ScanJet 4P SCSI [932]SANE Non C5110A, C5116A, C5117A, C5119A ScanJet 5P SCSI [933]SANE Non C5160A, C5167A ScanJet 5S ??? ??? Non C7167A ScanJet 3200C [934]Port Parallèle ??? Non C7680A ScanJet 3300C USB [935]SANE et [936]pilote USB Non C7727A ScanJet 3400C [937]Port Parallèle ou USB [938]SANE et [939]pilote PPSCSI ou [940]pilote USB Non C6290A, C6292A, C6293A, C7297A ScanJet 4100C, Cse, Cxi USB [941]SANE et [942]pilote USB Non C7177A ScanJet 4200C USB [943]SANE et [944]pilote USB Non C7737A ScanJet 4300C [945]Port Parallèle ou USB [946]SANE et [947]pilote PPSCSI ou [948]pilote USB Non C5190A, C5192A, C5193A, C5197A ScanJet 5100C, Cse, Cxi [949]Port Parallèle [950]SANE et [951]pilote PPSCSI Non C7697A, C8477A ScanJet 5300C, 5370C [952]Port Parallèle ou USB [953]SANE et [954]pilote PPSCSI ou [955]pilote USB Non C5190A, C7192A, C7193A ScanJet 5200C [956]Port Parallèle ou USB [957]SANE et [958]pilote PPSCSI ou [959]pilote USB Non C6260A, C6266A, C6267A, C6269A ScanJet 6100C SCSI [960]SANE Non C6270A, C6272A, C6273A, C6274A, C6275A, C7277A, C6278A ScanJet 6200C, Cse, Cxi, 6250C SCSI ou USB [961]SANE ou [962]pilote USB Non C7677A, C7678A, C7679A ScanJet 6300C, Cse, Cxi, 6350C, 6390C SCSI ou USB [963]SANE ou [964]pilote USB Oui C5100A PhotoSmart PhotoScanner SCSI [965]SANE Non Une FAQ dédiée au support des scanners HP sous Linux par [966]SANE est disponible à l'adresse : [967]http://www.kirchgessner.net/sanehpfaq.html _________________________________________________________________ 3.2.8.2. Le Digital Sender Ce produit est un numériseur, capable d'envoyer le résultat de la numérisation par courrier électronique, en attachant le document numérisé comme pièce jointe au format PDF. Il peut donc tout à fait être utilisé conjointement avec un serveur de mail (sendmail, postfix...) sous Linux (ou autre), ainsi que des clients lisant leurs messages depuis Linux, sous réserve qu'ils disposent d'un outil d'affichage des fichiers au format PDF tel que [968]Acrobat Reader ou [969]xpdf. Le Digital Sender peut également envoyer des images en tant que fichier TIFF, en noir et blanc ou en couleur. Pour les images noir et banc, cela fonctionne correctement, en revanche, il y a un problème avec les fichiers TIFF couleur. Ils sont envoyés à l'aide d'un format obsolète, qui n'est pas pris en charge par [970]libtiff, qui est à la base de la reconnaissance du format TIFF par la quasi-totalité des logiciels sous Linux. Ce qui signifie qu'il n'est pas possible d'ouvrir directement des images coleur TIFF créées par le Digital Sender à l'aide de logiciels tournant sous Linux (par exemple, The GIMP, ImageMagik). _________________________________________________________________ 3.2.8.3. Le CapShare Je n'ai pas d'informations sur ce produit et son fonctionnement dans un environnement Linux pour le moment. _________________________________________________________________ 3.2.9. La gamme des produits de stockage 3.2.9.1. Les Produits à base de Bandes La plupart des lecteurs de bandes SCSI HP fonctionnent sous Linux. Le fichier de périphérique à utiliser est /dev/st0 pour le premier lecteur, /dev/st1, pour le second... De plus amples informations peuvent être trouvées sur le site de certification [971]http://www.linuxtapecert.org/ HP fournit le logiciel tapeware avec ses lecteurs, comprenant une version pour Linux. D'autres outils de gestion de tels lecteurs peuvent être trouvés sur [972]http://mtx.sourceforge.net/ ou [973]http://www.arkeia.com/ ou [974]http://www.estinc.com/ ou [975]http://www.strusel007.de/linux/changer.html. _________________________________________________________________ 3.3. Logiciels HP et logiciels libres Cette section présente brièvement quelques-unes des applications proposées par HP, et pouvant être utilisées sous Linux. Ce sont soit des applications commerciales, soit des applications gracieusement offertes. Elle propose également des liens vers des logiciels libres sous d'autres systèmes d'exploitation HP (HP-UX, MPE/IX). _________________________________________________________________ 3.3.1. Les logiciels HP sous Linux FireHunter Ce logiciel, plutôt destiné aux FAI (ISP), se charge de la gestion de niveaux de services et est disponible pour des distributions RedHat version 5.2. Pour plus d'informations, consultez le site dédié [976]http://www.firehunter.com. HP Eloquence Ce logiciel, environnement de développement et d'exécution d'applications de gestion pour PME/PMI, est disponible sous Linux depuis 1997. De nombreuses distributions sont prises en charge par une société tierce à qui HP a déporté le support. Des informations complémentaires existent sur le site [977]http://www.hp-eloquence.com. HP WebJetAdmin Ce logiciel permet de paramétrer les imprimantes réseau HP par l'installation d'un service sur un serveur Linux interrogeable à partir d'un navigateur fonctionnant sur n'importe quelle machine cliente. HP a annoncé la disponibilité de ce produit en version 5.1 en Février 1999. La version 6.0 a été rendue disponible en Juin 2000 et la version 6.1 en Août 2000. La dernière version est téléchargeable à l'adresse : [978]ftp://ftp.hp.com/pub/networking/software/hpwebjet_linux.se lfx. Toutes les informations sur le produit sont accessibles depuis les adresses : [979]http://www.hp.com/go/webjetadmin et [980]http://www.hp.com/pond/wja/live/manual/html/wjacomp_linux. html. La version 5.6 en format RPM est également disponible à l'adresse [981]../mirror/hpwebjet-5.6-1.i386.rpm. HP WebQoS Ce logiciel permet de gérer la qualité des services Internet en stabilisant les performances lors de crêtes de charge, en optimisant les ressources utilisées, et en gérant des priorités au niveau des utilisateurs et des applications. HP a annoncé la disponibilité de ce produit durant l'été 1999. Des informations complémentaires existent sur le site [982]http://www.hp.com/go/webqos. HP OpenView Ce logiciel est une plate-forme complète de gestion de réseaux. Une version de NNM (Network Node Manager) est prévue, ainsi qu'ITO. Un client Omniback est disponible pour les distributions Redhat 5.2 (Cf [983]http://www.hp.com/storage/event/openview_hl.html). HP OpenMail Une version de ce logiciel de gestion de messagerie et de travail de groupe est disponible depuis le 1er Septembre 1999. Toutes les informations le concernant sont disponibles sur la page : [984]http://www.ice.hp.com/cyc/om/00/cysearch.cgi?pattern=100-1 417|100-1408|100-1333|100-0100. HP E-Speak E-Speak est un logiciel libre pour créer, composer, servir d'intermédiaire, gérer et accéder à des services électroniques sur Internet. Il permet à une ressource (périphérique informatique, application ou données) d'être virtualisée et redéployée comme un service électronique Internet. Toutes les informations le concernant sont disponibles sur la page : [985]http://www.e-speak.hp.com/. HP MC Service Guard Ce logiciel permet de gérer un cluster de haute disponibilité applicatif. HP a annoncé la disponibilité de ce produit pour 2001. Des informations complémentaires existent sur le site [986]http://www.unixsolutions.hp.com/products/ha/prod/ar/mcsg.h tml. Plug-in Scheduler policies for Linux Ce patch permet d'écrire et de charger des modules chargeables pour le noyau pour changer la politique de gestion des tâches, sans réamorcer le système. Il est disponible sur [987]http://resourcemanagement.unixsolutions.hp.com/WaRM/schedp olicy.html. HP TopTools Agent for Linux Ce logiciel est un agent DMI augmentant la facilité d'administration des machines HP sous Linux. A télécharger depuis [988]http://hp-linux.org/toptools. _________________________________________________________________ 3.3.2. Les logiciels en partenariat avec HP pour Linux GNUPro HP et [989]Cygnus Solutions ont annoncé le 8 Mars 1999 un partenariat pour fournir les outils GNUPro sur toutes les machines HP, entre autre sous Linux. _________________________________________________________________ 3.3.3. Les logiciels libres sous HP-UX De nombreux logiciels libres pour HP-UX sont disponibles à l'adresse [990]http://hpux.cict.fr. _________________________________________________________________ 3.3.4. Les logiciels libres sous MPE/IX De nombreux logiciels libres pour MPE/IX sont disponibles à l'adresse [991]http://jazz.external.hp.com/src Un émulateur de console HP700/92 pour PC est disponible [992]ici _________________________________________________________________ 3.4. Le support des solutions HP sous Linux HP propose depuis Mai 1999 une [993]offre de support mondiale sur Linux. Elle est détaillée sur la page [994]http://www.hp.com/pressrel/apr99/20apr99a.htm. Cette offre va jusqu'à la réponse 24 heures sur 24, 7 jours sur 7, dans les deux heures suivant la prise d'appel. La référence produit de cette offre est : HP LNXIA32A HP met aussi des ressources en ligne pour aider les personnes utilisant Linux avec ses produits : Base des incidents en ligne sur Linux [995]http://hp3.m0.net/m/s.asp?H1409133998X725229 Cours de formation sur Linux [996]http://hp3.m0.net/m/s.asp?H1409133998X725230 Forum de discussion sur Linux [997]http://hp3.m0.net/m/s.asp?H1409133998X725231 Des sociétés tierces offrent également un support Linux et logiciels libres sur plates-formes HP : [998]Medasys Contact : Sylvain Bergé <[999]Sylvain.Berge@medasys.fr> [1000]Atrid Contact : Bruno Deschandelliers <[1001]B.Deschandelliers@atrid.fr> [1002]Alcove Contact : Lucien Petit <[1003]Lucien.Petit@alcove.fr> _________________________________________________________________ 3.5. La formation aux solutions HP sous Linux HP propose depuis Juin 1999 une offre de formation mondiale sur Linux. Elle est détaillée sur la page [1004]http://education.hp.com/curr-linux.htm. Le détail de toutes les formations pour la France est disponible à l'adresse suivante : [1005]http://www.france.hp.com/formation/f_linux_00.html. _________________________________________________________________ 3.6. HP comme utilisateur et contributeur de logiciels libres HP ne se fait pas beaucoup remarquer dans le monde du logiciel libre bien qu'il y soit actif, et qu'il l'utilise pour sa propre informatique. Par exemple, l'ensemble du courrier électronique arrivant chez HP passe par des serveurs [1006]PostFix # dig hp.com -t mx | grep MX ;; hp.com, type = MX, class = IN hp.com. 21m28s IN MX 50 cossmtp.hp.com. hp.com. 21m28s IN MX 50 palsmtp.hp.com. hp.com. 21m28s IN MX 20 postal.agilent.com. hp.com. 21m28s IN MX 10 envelope.hp.com. hp.com. 21m28s IN MX 10 letter.hp.com. hp.com. 21m28s IN MX 20 stamp.agilent.com. hp.com. 21m28s IN MX 30 cossmtpx.hp.com. hp.com. 21m28s IN MX 50 atlsmtp.hp.com. # telnet envelope.hp.com 25 Trying 192.151.10.4... Connected to envelope.hp.com. Escape character is '^]'. 220 envelope.hp.com ESMTP Postfix QUIT 221 Bye Connection closed by foreign host. # telnet letter.hp.com 25 Trying 192.151.10.3... Connected to letter.hp.com. Escape character is '^]'. 220 letter.hp.com ESMTP Postfix QUIT 221 Bye Connection closed by foreign host. # telnet postal.agilent.com 25 Trying 192.6.9.3... Connected to postal.agilent.com. Escape character is '^]'. 220 postal.agilent.com ESMTP Postfix QUIT 221 Bye Connection closed by foreign host. De même, pour son serveur Web institutionnel, HP utilise [1007]Apache comme plus de 15 millions d'autres sites. # wget -S http://www.hp.com/ --15:09:45-- http://www.hp.com:80/ => `index.html.1' Connecting to www.hp.com:80... connected! HTTP request sent, awaiting response... 200 OK 2 Date: Fri, 05 May 2000 13:12:25 GMT 3 Server: Apache/1.3.9 (Unix) mod_fastcgi/2.2.2 [...] [1008]Agilent (ex-branche d'HP) est également un utilisateur du logiciel libre [1009]Perl pour sa CAO, comme relaté [1010]ici HP a également oeuvré à l'amélioration du fonctionnement du mandataire cache [1011]Squid , comme exposé [1012]ici _________________________________________________________________ Chapitre 4. Solutions et Dimensionnement Ce chapitre propose une aide au dimensionnement des NetServers Linux suivant différents types d'utilisation. Il faut d'abord considérer que cet exercice est toujours périlleux. En effet, seule la réalité permet de mettre à l'épreuve de telles prévisions. Néanmoins, avec l'expérience des solutions déployées par le passé, on peut arriver à donner quelques règles utiles. On peut appliquer un certain nombre de règles en vigueur pour le dimensionnement de serveurs Unix classiques, en considérant que les systèmes CISC (majoritaires en environnement Linux) consomment environ 2,5 fois moins de ressources en mémoire que les systèmes RISC, étant donné que les binaires manipulés sont plus petits (les plates-formes Intel étant pour le moment des architectures 32 bits). Ceci influence aussi l'occupation disque, et la taille de la mémoire de pagination. Il est évident qu'il faut, quel que soit le système, considérer les goulets d'étranglement de la solution mise en place, car ils détermineront le maillon le plus faible. On prêtera une attention particulière aux points suivants : * Le nombre et la vitesse des disques (le débit de ceux-ci pouvant aller jusqu'à 20 Mo/s pour des disques 10.000 tr/mn), * Le nombre et la vitesse des contrôleurs SCSI (le débit de ceux-ci pouvant aller jusqu'à 80 Mo/s pour les contrôleurs Ultra2 LVD du LH3/4), * L'ajout d'une carte SCSI prise en charge lors d'ajout de périphériques lents (DAT, DLT, graveur de CDs ...) pour ne pas faire passer le contrôleur en mode compatible descendant, et dégrader nettement les performances en entrées/sorties. On se méfiera également du caractère extensible des machines. En effet, il est souvent préférable pour un client, de rajouter un serveur, plutôt que d'augmenter les capacités de celui en place. La raison en est d'ordre financier d'une part, le coût des ajouts se révélant, sur un système déjà ancien, proches de ceux d'un nouveau système dont les prix baissent continuellement. Même chose pour la maintenance. D'autre part, techniquement, il peut être plus intéressant de bénéficier des dernières technologies pour obtenir une machine plus équilibrée et plus performante. Par exemple, lors de l'introduction de l'Ultra2 LVD, il était plus intéressant de racheter un serveur pour bénéficier d'une vitesse de bus SCSI de 80 Mo/s, plutôt que de mettre à jour un serveur en Ultra Wide à 40 Mo/s. Ceci implique qu'il est intéressant de dimensionner correctement son serveur, dès le départ, pour toute la durée prévisible de son utilisation (typiquement 3 ans aujourd'hui). Dans le même ordre d'idées, on examinera soigneusement le fait de conseiller une machine multi-processeur au lieu de deux machines mono-processeurs. 2 systèmes différents impliquent 2 contrôleurs disques, 2 séries de disques, 2 bus mémoires séparés, donc une meilleure performance mais une administration plus importante. En revanche, un seul système facilite cette tâche, permet une communication rapide entre processeurs, ce qui peut être nécessaire pour certaines applications, mais rend l'environnement plus fragile (potentiellement plus d'indisponibilité en cas de panne du système). D'autre part, il y a plus de pertes, intrinsèquement, sur un modèle multi-processeur, en communications au niveau système. Cette question sera notamment à envisager dans le cas de l'ajout d'un processeur (obsolète par nature) sur une machine a posteriori, au lieu de l'ajout d'un serveur complet. Sur les aspects mémoire, Linux peut gérer aujourd'hui jusqu'à 64 Go dans les noyaux stables. Linux tire parti de toute la mémoire qui lui est donnée, notamment dans la constitution d'un cache disque qui améliore considérablement les performances du système. On peut donc surdimensionner la quantité de mémoire installée, car ceci est préférable à une situation où le serveur serait obligé de paginer (ce qui pénalise énormément les performances). La taille minimale fournie sur les NetServers (64 Mo ou 128 Mo) correspond parfaitement à une utilisation normale d'un système et ne nécessite pas d'ajout particulier. Il faut tenir compte du fait qu'on n'utilise aucun environnement graphique sur les serveurs de production. Pour ce qui est de la mémoire de pagination (swap), sous Linux, elle vient en addition de la mémoire réelle pour donner la mémoire virtuelle totale dont dispose le serveur. Comme règle de base, il est conseillé de doter la machine d'autant de mémoire de pagination que de mémoire réelle, pour permettre au système de placer sur disque la quasi-totalité des processus en cours en cas de besoin. En revanche la règle qui prévaut sur les Unix d'origine Système V (tel HP-UX), de réserver deux fois la taille de la mémoire pour le swap n'est pas utile sous Linux. Il est à noter que Linux peut être amené à paginer certains processus inactifs pour libérer le maximum de mémoire vive possible. Avoir un système dont une partie du swap est occupé n'est donc pas nécessairement une preuve de manque de mémoire, ni de perte de performances. Vous trouverez ci-dessous des recommandations suivant le type d'utilisation faite du NetServer HP sous Linux. Il est possible de cumuler plusieurs fonctions sur un même serveur. On prendra soin dans ce cas d'additionner les ressources nécessaires pour remplir les services. Quelques règles génériques sont à considérer : * On considère que le nombre d'utilisateurs simultanés équivaut à la moitié du nombre d'utilisateurs total du serveur. * La taille mémoire minimale nécessaire pour un Serveur Linux utilisable est de 32 Mo, ce qui est inférieur à la taille mémoire minimale disponible sur les NetServers (64 Mo). En cas d'utilisation de X-Window avec KDE ou Gnome sur la machine, il faut prévoir 64 Mo supplémentaires, soit 96 Mo minimum. * La taille disque minimale nécessaire pour un Serveur Linux utilisable est de 2 Go, ce qui est inférieur à la taille disque minimale disponible sur les NetServers (9 Go). * Dans le cas d'une utilisation en Raid 1, on doublera la taille disque utile pour obtenir la taille disque nécessaire. Dans le cas d'une utilisation en Raid 5, on ajoutera 1 disque pour obtenir la taille disque nécessaire. * Sauf cas particulier (serveur de calcul), la zone de swap est égale en taille à la taille mémoire. * Le processeur minimal nécessaire pour un serveur Linux utilisable est un Pentium 133, ce qui est inférieur au processeur minimal disponible sur les NetServers (Pentium II 450). * Chaque utilisateur X-Window exécutant un client sur le serveur consomme en moyenne 2 Mo. * Il peut être utile d'ajouter des cartes réseau sur ce type de machine pour lisser le trafic, en fonction du nombre de clients. _________________________________________________________________ 4.1. Linux comme serveur de fichiers et d'impression 4.1.1. Linux comme serveur de fichiers Le service de partage consomme 2 Mo de RAM, plus 2 Mo par partage. Dans le cas d'un partage unique (Espace Utilisateur par exemple), cela revient à une consommation de 2 Mo par utilisateur. Dans le cas proposé, on estime que chaque utilisateur dispose de 100 Mo d'espace disque au niveau du serveur, évoluant vers 200 Mo au bout de 3 ans. Les ressources processeur consommées sont relativement faibles, un modèle d'entrée de gamme sera donc suffisant sur ce plan. On privilégiera plutôt une rapidité d'entrées/sorties avec de l'Ultra 2 LVD SCSI à 80 Mo/s, si le budget le permet, et des disques 10.000 tr/mn. Tableau 4-1. Dimensionnement d'un serveur de fichiers Utilisateurs simultanés Taille Mémoire Taille Disque Machine Type 1 - 100 312 Mo 27 Go E800 100 - 500 1 Go 117 Go LC2000 500 - 1000 2 Go 216 Go LH3000 _________________________________________________________________ 4.1.2. Linux comme serveur d'impression Le service de partage consomme 2 Mo de RAM, plus 2 Mo par imprimante partagée. Dans le cas d'un partage unique (une imprimante par utilisateur typiquement), cela revient à une consommation de 2 Mo par utilisateur. Dans le cas proposé, on estime que chaque utilisateur imprime simultanément des fichiers de 5 Mo en moyenne, il faut disposer de cet espace disque au niveau du serveur. Les ressources processeur consommées sont relativement faibles, un modèle d'entrée de gamme sera donc suffisant sur ce plan. Tableau 4-2. Dimensionnement d'un serveur d'impression Utilisateurs simultanés Taille Mémoire Taille Disque Machine Type 1 - 100 312 Mo 9 Go E800 100 - 500 1 Go 9 Go E800 500 - 1000 2 Go 9 Go LC2000 _________________________________________________________________ 4.2. Linux comme serveur Internet/Intranet 4.2.1. Serveur Web Le service de serveur Web consomme 2,5 Mo de RAM en mode statique (pages HTML simples) et 5 Mo de RAM en mode dynamique (pages HTML générées à partir de perl, PHP, ...) par utilisateur. La place disque nécessaire est fonction de la nature du serveur, sachant que la plus grosse consommation provient des images. Les ressources processeur consommées étant importantes, il faut considérer la possibilité de monter en fréquence et d'augmenter le nombre de processeurs, ce type de trafic se prête bien à une parallélisation. On privilégiera aussi une rapidité d'entrées/sorties avec de l'Ultra 2 LVD SCSI à 80 Mo/s, si le budget le permet et des disques 10.000 tr/mn. Tableau 4-3. Dimensionnement d'un serveur Web statique Utilisateurs simultanés Taille Mémoire Taille Disque Machine Type 1 - 100 256 Mo 9 Go E800 100 - 500 1 Go 9 Go LC2000 Bi-processeur 500 - 1000 2 Go 9 Go LH4 Quadri-processeur Tableau 4-4. Dimensionnement d'un serveur Web dynamique Utilisateurs simultanés Taille Mémoire Taille Disque Machine Type 1 - 100 512 Mo 9 Go E800 100 - 500 2 Go 9 Go LC2000 Bi-processeur 500 - 1000 4 Go 18 Go LH6000 Quadri-processeur _________________________________________________________________ 4.2.2. Serveur de courrier électronique En général, cette machine sert à la fois de serveur SMTP (envoi et réception de messages) et POP (gardien des messages et gestion des accès clients). Le service de serveur Mail SMTP consomme 2 Mo de RAM par utilisateur. Le service de serveur Mail POP consomme 2 Mo de RAM par utilisateur. La place disque nécessaire est d'autant plus importante que les attachements (images, documents divers) prennent une place prédominante dans les échanges via courrier électronique. On considère dans ce cas une taille moyenne de boîte aux lettres de 50 Mo. Les ressources processeur consommées étant importantes, il faut considérer la possibilité de monter en fréquence et d'augmenter le nombre de processeurs, ce type de trafic se prête bien à une parallélisation. Tableau 4-5. Dimensionnement d'un serveur de courrier électronique Utilisateurs simultanés Taille Mémoire Taille Disque Machine Type 1 - 100 400 Mo 9 Go E800 100 - 500 2 Go 27 Go LC2000 Bi-processeur 500 - 1000 4 Go 54 Go LH6000 Quadri-processeur _________________________________________________________________ 4.2.3. Serveur Pare-Feu / Mandataire / Cache Web En général, cette machine sert à la fois de serveur Pare-Feu, de relais Mandataire (proxy) (dans les deux sens) et de cache Web puisque toutes les requêtes passent par elle. Le service de Pare-Feu consomme 1 Mo de RAM. Le service de relais Mandataire consomme 0,3 Mo de RAM par relais entrant. Le service de cache Web consomme 0,5 Mo de RAM par utilisateur. La place disque nécessaire est liée au paramétrage du service de cache Web. Dans ce cas, on considère 20 Mo par utilisateur. Les ressources processeur consommées sont importantes, du fait du traitement des paquets IP. Il faut donc considérer la possibilité de monter en fréquence. Tableau 4-6. Dimensionnement d'un serveur Pare-Feu/Mandataire/Cache Web Utilisateurs simultanés Taille Mémoire Taille Disque Machine Type 1 - 100 128 Mo 9 Go E800 100 - 500 512 Mo 18 Go E800 500 - 1000 1 Go 27 Go E800 _________________________________________________________________ 4.2.4. Serveur Annuaire En général, cette machine utilise un logiciel comme [1013]OpenLDAP pour remplir ces fonctions. Le service de LDAP consomme 1 Mo de RAM et 10 ko de RAM par utilisateur. La place disque nécessaire est de même nature soit 10 ko par utilisateur. Les ressources processeur consommées sont modérées. Tableau 4-7. Dimensionnement d'un serveur LDAP Utilisateurs simultanés Taille Mémoire Taille Disque Machine Type 1 - 100 64 Mo 9 Go E800 100 - 500 64 Mo 9 Go E800 500 - 1000 128 Mo 9 Go E800 _________________________________________________________________ 4.3. Linux comme serveur de calcul En général, cette machine est extrêmement stressée, notamment côté processeur et mémoire. Quelques fois, ceci s'accompagne de besoins en entrées/sorties intensifs. On dote donc fréquemment cette machine de processeurs haut de gamme (actuellement Pentium III Xeon) avec un cache de niveau 2 le plus grand possible (actuellement 2 Mo) Côté mémoire, on aura tendance à s'approcher du maximum possible, soit 4 Go. Pour ce type de serveur, on aura intérêt à adapter le swap de façon à couvrir tous les besoins en mémoire requis par les codes de calcul à exécuter. Il n'y a souvent pas de contrainte spécifique sur les performances réseau, sauf en cas de cluster de noeuds de calcul, auquel cas on peut envisager d'équiper les machines de cartes 100 Mbit/s avec un commutateur entre-elles, voire de produits Myrinet ou Gigabit. Typiquement un LH4 2*PIII 550MHz 1 Go/2*9Go est la cible de ce type de serveur. Le choix est extrêmement variable en fonction de la nature des calculs à effectuer. On remarquera qu'il existe des processeurs, tels que le PA-Risc, beaucoup plus performants en calcul flottant que les processeurs Intel du moment (jusqu'à un facteur 6). _________________________________________________________________ 4.4. Linux comme serveur bureautique Ce type de serveur est encore peu courant dans le monde du logiciel libre. Il est plus fréquent dans le monde Microsoft en association avec les solutions [1014]Metaframe de [1015]Citrix. Le service de bureautique consomme 50 Mo de RAM, par utilisateur. Intrinsèquement, cette machine n'a pas de besoins disques importants, si elle n'est pas en même temps serveur de fichiers. Les ressources processeur consommées étant importantes, il faut considérer la possibilité de monter en fréquence et d'augmenter le nombre de processeurs, ce type de trafic se prête bien à une parallélisation. Tableau 4-8. Dimensionnement d'un serveur de bureautique Utilisateurs simultanés Taille Mémoire Taille Disque Machine Type 1 - 10 512 Mo 9 Go E800 10 - 50 2 Go 9 Go LH4 Bi-processeur 50 - 100 4 Go 18 Go LH6000 Quadri-processeur _________________________________________________________________ Chapitre 5. Foire Aux Questions (FAQ) 5.1. [1016]"Comment faire reconnaître plus de 1 Go de mémoire sur mon NetServer ?" 5.2. [1017]"Comment faire reconnaître plus de 128 Mo de swap sur mon NetServer ?" 5.3. [1018]"Comment utiliser les autres processeurs de mon NetServer ?" 5.4. [1019]" Linux est-il compatible avec l'an 2000 ?" 5.1. "Comment faire reconnaître plus de 1 Go de mémoire sur mon NetServer ?" Les informations suivantes sont adaptées et traduites depuis la [1020]page de Rik van Riel. Elles s'appliquent aussi bien au noyau 2.0.x qu'aux noyaux 2.2.x. Tout d'abord l'architecture Intel IA32 est limitée par construction dans sa gestion de la mémoire à 4 Go. Espace qui doit lui-même être séparé en mémoire virtuelle et mémoire physique. Ce qui signifie que si l'on choisit de reconnaître davantage de mémoire vive, la taille maximale pour un programme diminue. Néanmoins, Linux ne peut gérer que jusqu'à 1 Go de mémoire par défaut. Pour aller au delà, en fait jusqu'à 2 Go aujourd'hui car Linux ne peut gérer davantage de mémoire pour le moment, il faut modifier 2 fichiers fournis avec les sources du noyau et le recompiler. Les 2 sources en questions sont /usr/src/linux/include/asm-i386/page.h et /usr/src/linux/arch/i386/vmlinux.lds. A partir des noyaux 2.0.37 et 2.2.12, la rustine a été intégrée dans le noyau et est activable lors du make config. A partir du noyau 2.3.23, la taille maximum gérable en version i386 est de 64 Go. 5.2. "Comment faire reconnaître plus de 128 Mo de swap sur mon NetServer ?" Jusqu'à la version 2.8x du paquetage util-linux, la commande mkswap ne pouvait créer des partitions de swap que de 128 Mo au maximum. Il fallait alors en créer autant que nécessaire. Depuis la version 2.9, incluse en standard dans les distributions RedHat 6.0 et suivantes, il est possible de créer directement des partitions de swap jusqu'à concurrence de 2 Go par partition et de 8 partitions. 5.3. "Comment utiliser les autres processeurs de mon NetServer ?" Le multi-processeur est pris en charge de façon opérationnelle par Linux depuis la version 2.0 du noyau. Pour un noyau 2.0.x, il faut le recompiler en positionnant notamment le flag SMP à 1 dans le Makefile. Pour un noyau 2.2.x ou 2.4.x, il faut le positionner dans le make config. Pour plus de détails, consultez le [1021]SMP-HOWTO. 5.4. " Linux est-il compatible avec l'an 2000 ?" D'une manière générale, Linux est compatible an 2000. Pour plus de détails, on se reportera à la page de [1022]FAQ. _________________________________________________________________ Chapitre 6. Références J'ai déjà mentionné les fichiers de documentation, installés typiquement sous le répertoire /usr/src/linux/Documentation. Ils constituent une vraie mine d'or d'informations utiles. Les FAQ (Foires aux questions) suivantes sont diffusées périodiquement dans le forum [1023]news:news.answers et archivées sur les sites FTP tels que [1024]ftp://rtfm.mit.edu : * FAQ du forum [1025]news:comp.os.linux.announce * FAQ du forum [1026]news:comp.sys.hp.hpux De nombreux autres HOWTO Linux contiennent des informations utiles en liaison avec notre sujet : * [1027]Linux SCSI HOWTO * [1028]Linux CD-Writing HOWTO * [1029]Linux Hardware HOWTO * [1030]Linux Distribution HOWTO * [1031]Linux Kernel HOWTO * [1032]Linux Sound HOWTO * [1033]Linux PCMCIA HOWTO * [1034]Linux Laptop Guide * [1035]Linux on HP Laptops Les forums Usenet suivants couvrent des sujets relatifs à HP : * [1036]news:comp.sys.hp.hardware * [1037]news:comp.sys.hp.misc On consultera aussi avec profit les forums mentionnés à [1038]Section 2.2.2.5. Sur l'Internet, on pourra consulter avec profit les sites suivants : Tableau 6-1. Les sites Web de HP Sujet URL HP Linux Portail [1039]http://www.hp.com/go/linux HP et Linux [1040]http://www.hp-linux.org HP France Education Linux [1041]http://hpwww.ec-lyon.fr/hpeduc/education/offre/linux/educ_linux. html HP Support [1042]http://www.france.hp.com/clients/linux.html HP HOWTO [1043]http://www.HyPer-Linux.org/HP-Howto/HP-HOWTO-FR/index.html Linux Pa-Risc (Puffin Group) [1044]http://thepuffingroup.com/parisc/software.html Linux Pa-Risc (ESIEE) [1045]http://mkhppa1.esiee.fr/fr/ Linux et HP Labs [1046]http://www.hpl.hp.com/research/comp_systems.html#Linux Technology Linux IA64 [1047]http://www.linuxia64.org Linux IA64 (HP Labs) [1048]http://dtf.external.hp.com/dtf/swdev/1999/08/feature1_a.html HP RedHat certification [1049]http://bugzilla.redhat.com/certification/cert-report.php3?mod_co mpany=Hewlett+Packard HP Linuxcare certification [1050]http://www.linuxcare.com/labs/certs/C1F5.epl HP Utigroup [1051]http://www.hputigroup.com Tableau 6-2. D'autres sites de base sur Linux et les Logiciels Libres Sujet URL Linux Documentation Project [1052]http://www.linuxdoc.org Linux Weekly News - Résumé de l'année 1998 [1053]http://lwn.net/1999/features/1998timeline/ Linux Weekly News - Résumé de l'année 1999 [1054]http://lwn.net/1999/features/Timeline/ IOS Counter [1055]http://www.leb.net/hzo/ioscount/index.html Comparaison MS-Windows NT Server 4.0 -- Unix [1056]http://www.linux-france.com/article/these/unix-vs-nt/unix-vs-nt. html Les études Netcraft [1057]http://www.netcraft.com/survey/ L'AFUL (Association) [1058]http://www.aful.org APRIL (Association) [1059]http://www.april.org Linux Center [1060]http://www.linux-center.org Linux France [1061]http://www.linux-france.com/ Linux Journal [1062]http://www.linuxjournal.com Linux Gazette [1063]http://www.linuxgazette.com/ Linux Magazine France [1064]http://www.linuxmag-france.com/ Linux Start [1065]http://fr.linuxstart.com/index.html Da Linux French Page [1066]http://linuxfr.org/news/ RedHat Hardware support [1067]http://www.redhat.com/cgi-bin/support Source Exchange [1068]http://www.sourcexchange.com/ Mobilix : Linux Mobile [1069]http://mobilix.org/ Serveurs des développeurs [1070]http://www.linuxmama.com/dev-server.html Medasys Linux [1071]http://www.medasys-digital-systems.fr/linux _________________________________________________________________ Chapitre 7. Contributeurs Tous mes remerciements aux diverses personnes ayant contribué, de quelque façon que ce soit, à l'amélioration de ce HOWTO : * Pierre-Antoine Angelini <[1072]angelini@ifsic.univ-rennes1.fr> * Tim Bell <[1073]bhat@trinity.unimelb.edu.au> * Jeroen ten Berge <[1074]j.ten.berge@getexo.nl> * Sylvain Bergé <[1075]Sylvain.Berge@medasys-digital-systems.fr> * Stéphane Bortzmeyer <[1076]bortzmeyer@debian.org> * Brendan Burns<[1077]bburns@wso.williams.edu> * Jean-Bernard Chaffardon <[1078]Jean-Bernard_Chaffardon@hp.com> * Khalil Chawoshi <[1079]chawoshi@subatech.in2p3.fr> * Béatrice Cornec <[1080]beatrice@victoria.frmug.org> * Sébastien Cottalorda <[1081]sebastien.cottalorda@mageos.com> * Nug Csigas <[1082]nug@sch.bme.hu> * Philippe Depouilly <[1083]Philippe.Depouilly@math.u-bordeaux.fr> - son site : [1084]http://www.math.u-bordeaux.fr/~depouill * Ludovic Didierlaurent <[1085]ludovic_didierlaurent@hp.com> * Frédéric Dubuy <[1086]F.Dubuy@atrid.fr> * Michael Dwyer <[1087]mdwyer@alumbre-tech.com> * Stéphane Eranian <[1088]Stephane_Eranian@hp.com> * Mark Eve <[1089]Mark_Eve@hp.com> * Greg Ferguson <[1090]gferg@hoop.timonium.sgi.com> * Laurent Frey <[1091]laurent.frey@iota.u-psud.fr> * Bertrand Gambier <[1092]Bertrand.Gambier@medasys-digital-systems.fr> * Stein Roar Gjøen <[1093]stein.roar.gjoen@ks-t.no> * Grant Grundler <[1094]grundler@cup.hp.com> * Jérémie Guillaume <[1095]jno@sasi.fr> * Yann Guillemot <[1096]Yann_Guillemot@hp.com> * Werner Heuser <[1097]wehe@snafu.de> * Marc Hia Balié <[1098]Marc_Hia-Balie@hp.com> * Jesse Don Hickson III <[1099]theme@montana.com> * Chris Holden <[1100]chris.holden@gte.net> * Masanari Iida <[1101]Masanari_Iida@hp.com> * Markus Kuhn <[1102]Markus.Kuhn@cl.cam.ac.uk> * Pascal Lemonnier <[1103]Pascal.Lemonnier@medasys.fr> * Maciej Macowicz <[1104]Maciej.Macowicz@epfl.ch> * Olivier Martinet <[1105]Olivier_Martinet@hp.com> * Mad Matt <[1106]madmatt@bits.bris.ac.uk> - son site : [1107]http://www.bits.bris.ac.uk/madmatt/laptop.shtml * Craig McCluskey <[1108]mccluskey@nospam.mail.utexas.edu> * David Mentré <[1109]David.Mentre@irisa.fr> * Jacques Misselis <[1110]Jacques.Misselis@hp.com> * Andreas Nierula <[1111]A.Nierula@t-online.de> * Gilles Noisette <[1112]Gilles_Noisette@hp.com> * Harry Page <[1113]HARRY_PAGE@HP-NewZealand-om1.om.hp.com> * Luis Pais <[1114]Luis_Pais@hp.com> * Alain Pascal <[1115]pascal@montrouge.omnes.slb.com> * Luis Peromarta <[1116]Luis_Peromarta@hp.com> * Daryl Poe <[1117]Daryl_Poe@hp.com> * Fons Rademakers <[1118]Fons.Rademakers@cern.ch> - son site : [1119]http://hp-linux.cern.ch * Lane Rollins <[1120]laner@teleport.com> * Hester van Rooyen <[1121]reception@geo.co.za> * Eric Rueda <[1122]Eric_Rueda@hp.com> * Klamer Schutte <[1123]Schutte@fel.tno.nl> * Thierry Simonnet <[1124]t.simonnet@esiee.fr> * Tech Support <[1125]support@ami.com> * Nicolas Thomas <[1126]Nicolas_Thomas@hp.com> * Dirk De Wachter <[1127]Dirk.DeWachter@rug.ac.be> * Norman Walsh <[1128]ndw@nwalsh.com> _________________________________________________________________ Chapitre 8. Versions ultérieures Ce chapitre donne des indications sur les éléments devant être pris en compte dans des versions ultérieures de ce document. Il doit plus être pris comme un pense-bête pour l'auteur, que comme un engagement de ce qu'il fera vraiment ! Version 0.94 Chemin des images. Meilleure gestion de la taille des tableaux et des césures (PS). Placement des notes en bas de page (PS). Gestion des veuves et orphelins (PS). Gestion de la taille de la page, des marges et du placement des images (PS). Paragraphe sur la gestion des TX/e-vectra Révision du paragraphe sur les imprimantes. Version 0.95 Vérification des URLs en fonction de la langue et adaptation dès que possible. Utilisation des adresses officielles et paragraphes sur les miroirs. Révision de la partie Cluster. Paragraphe sur l'APM sur les portables. Ajout de Linux comme serveur de Bases de Données et de Sauvegarde (Arkeia). Gestion de la Remote Assistant - Remote Control. Faire apparaître les paragraphes argumentaires dans la TOC (HTML) Eviter des titres en bas de page (PS). Ajout d'un paragraphe sur les produits réseaux. Version 0.96 Détailler le frein au changement Unix/Linux Revoir l'exemple du vaccin :-) Gestion de la date courante et version courante avec wml Revoir le contenu du chapitre 1 (y mettre l'historique et les nouvelles version) Glossaire des abréviations et termes - revoir firstterm _________________________________________________________________ Annexe A. GNU Free Documentation License Version 1.1, March 2000 Copyright (C) 2000 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. _________________________________________________________________ 0. PREAMBLE The purpose of this License is to make a manual, textbook, or other written document "free" in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others. This License is a kind of "copyleft", which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software. We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference. _________________________________________________________________ 1. APPLICABILITY AND DEFINITIONS This License applies to any manual or other work that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. The "Document", below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as "you". A "Modified Version" of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language. A "Secondary Section" is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document's overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (For example, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them. The "Invariant Sections" are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. The "Cover Texts" are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A "Transparent" copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, whose contents can be viewed and edited directly and straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup has been designed to thwart or discourage subsequent modification by readers is not Transparent. A copy that is not "Transparent" is called "Opaque". Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML designed for human modification. Opaque formats include PostScript, PDF, proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML produced by some word processors for output purposes only. The "Title Page" means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, "Title Page" means the text near the most prominent appearance of the work's title, preceding the beginning of the body of the text. _________________________________________________________________ 2. VERBATIM COPYING You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3. You may also lend copies, under the same conditions stated above, and you may publicly display copies. _________________________________________________________________ 3. COPYING IN QUANTITY If you publish printed copies of the Document numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects. If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages. If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a publicly-accessible computer-network location containing a complete Transparent copy of the Document, free of added material, which the general network-using public has access to download anonymously at no charge using public-standard network protocols. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public. It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document. _________________________________________________________________ 4. MODIFICATIONS You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version: A. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission. B. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has less than five). C. State on the Title page the name of the publisher of the Modified Version, as the publisher. D. Preserve all the copyright notices of the Document. E. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices. F. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below. G. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document's license notice. H. Include an unaltered copy of this License. I. Preserve the section entitled "History", and its title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section entitled "History" in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence. J. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the "History" section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission. K. In any section entitled "Acknowledgements" or "Dedications", preserve the section's title, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein. L. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles. M. Delete any section entitled "Endorsements". Such a section may not be included in the Modified Version. N. Do not retitle any existing section as "Endorsements" or to conflict in title with any Invariant Section. If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version's license notice. These titles must be distinct from any other section titles. You may add a section entitled "Endorsements", provided it contains nothing but endorsements of your Modified Version by various parties--for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard. You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one. The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version. _________________________________________________________________ 5. COMBINING DOCUMENTS You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice. The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work. In the combination, you must combine any sections entitled "History" in the various original documents, forming one section entitled "History"; likewise combine any sections entitled "Acknowledgements", and any sections entitled "Dedications". You must delete all sections entitled "Endorsements." _________________________________________________________________ 6. COLLECTIONS OF DOCUMENTS You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects. You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document. _________________________________________________________________ 7. AGGREGATION WITH INDEPENDENT WORKS A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, does not as a whole count as a Modified Version of the Document, provided no compilation copyright is claimed for the compilation. Such a compilation is called an "aggregate", and this License does not apply to the other self-contained works thus compiled with the Document, on account of their being thus compiled, if they are not themselves derivative works of the Document. If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one quarter of the entire aggregate, the Document's Cover Texts may be placed on covers that surround only the Document within the aggregate. Otherwise they must appear on covers around the whole aggregate. _________________________________________________________________ 8. TRANSLATION Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License provided that you also include the original English version of this License. In case of a disagreement between the translation and the original English version of this License, the original English version will prevail. _________________________________________________________________ 9. TERMINATION You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this License. Any other attempt to copy, modify, sublicense or distribute the Document is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. _________________________________________________________________ 10. FUTURE REVISIONS OF THIS LICENSE The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See [1129]http://www.gnu.org/copyleft/. Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License "or any later version" applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation. _________________________________________________________________ How to use this License for your documents To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page: Copyright (c) YEAR YOUR NAME. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with the Invariant Sections being LIST THEIR TITLES, with the Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST. A copy of the license is included in the section entitled "GNU Free Documentation License". If you have no Invariant Sections, write "with no Invariant Sections" instead of saying which ones are invariant. If you have no Front-Cover Texts, write "no Front-Cover Texts" instead of "Front-Cover Texts being LIST"; likewise for Back-Cover Texts. If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software. References 1. http://www.hp.com/ 2. http://www.medasys.fr/ 3. http://www.hp.com/ 4. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#GFDL 5. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#INTRODUCTION 6. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN100 7. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN111 8. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN123 9. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#THANKS 10. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#PRESENTATION 11. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN197 12. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN200 13. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN223 14. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN232 15. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#CONCEPTS 16. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN262 17. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#CHOIX 18. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN482 19. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN536 20. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LINUX-VS-OS 21. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN551 22. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN559 23. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN562 24. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#HP-PRODUCTS 25. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN571 26. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN573 27. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN588 28. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#HP-HARDWARE 29. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN699 30. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN4487 31. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN4764 32. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN4778 33. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN4834 34. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN4872 35. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN4970 36. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN4975 37. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5192 38. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#HP-SOFTWARE 39. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5208 40. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5265 41. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5273 42. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5277 43. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#HP-SOLUTIONS 44. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#HP-TRAINING 45. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#HP-OSSD 46. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#SIZING 47. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5390 48. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5392 49. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5424 50. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LINUX-INTRANET 51. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5458 52. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5519 53. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5551 54. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5583 55. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LINUX-COMPUTING 56. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LINUX-DESKTOP 57. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FAQ 58. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#REFERENCES 59. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#CONTRIBUTEURS 60. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#TODO 61. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#GFDL 62. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN6108 63. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN6113 64. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN6123 65. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN6127 66. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN6133 67. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN6169 68. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN6174 69. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN6178 70. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN6182 71. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN6185 72. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN6188 73. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN6193 74. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN319 75. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN718 76. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN962 77. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN1575 78. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN1639 79. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN2529 80. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN2736 81. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN2907 82. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN3347 83. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN3410 84. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN3914 85. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN3965 86. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN4490 87. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN4790 88. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN4924 89. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN4983 90. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5395 91. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5427 92. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5461 93. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5490 94. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5522 95. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5554 96. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5587 97. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5624 98. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5746 99. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5808 100. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#IDC1998 101. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#IDC1999 102. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETCRAFT 103. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#IOSCOUNTER 104. http://www.hp.com/ 105. http://www.medasys.fr/ 106. http://www.hp.com/ 107. http://www.medasys.fr/ 108. http://www.hp.com/ 109. http://www.medasys.fr/ 110. http://www.hp.com/ 111. news:fr.comp.os.linux.annonces 112. news:comp.os.linux.annonces 113. http://www.freenix.org/unix/linux/HOWTO 114. http://metalab.unc.edu/LDP/HOWTO 115. http://www.freenix.org/unix/linux/HOWTO 116. http://www.HyPer-Linux.org/HP-Howto/HP-HOWTO-FR 117. mailto:Bruno@HyPer-Linux.org 118. mailto:guylhem@rrremovethis.oeil.qc.ca 119. news:comp.sys.hp.hpux 120. http://hpux.cict.fr/ 121. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#CONTRIBUTEURS 122. mailto:Marc_Hia-Balie@hp.com 123. http://www.cs.helsinki.fi/~torvalds/ 124. http://www.gnu.org/people/rms.html 125. mailto:nat@nataa.frmug.org 126. mailto:xc@itp.fr 127. mailto:dumas@Linux.EU.Org 128. mailto:Remy.Card@linux.org 129. mailto:Dany.Coffineau@alcatel.fr 130. mailto:Francois.Strobel@alcatel.fr 131. mailto:F.Dubuy@atrid.fr 132. mailto:pascal@montrouge.omnes.slb.com 133. mailto:Pascal.Lemonnier@medasys.fr 134. mailto:rse@engelschall.com 135. http://www.engelschall.com/sw/wml 136. mailto:cg@sgmltools.org 137. http://www.sgmltools.org/ 138. mailto:ndw@nwalsh.com 139. http://www.docbook.org/ 140. mailto:jjc@jclark.com 141. http://www.jclark.com/jade/ 142. mailto:cornec@victoria.frmug.org 143. http://www.gnu.org/ 144. http://www.opensource.org/ 145. http://www.freebsd.org/ 146. http://www.apache.org/ 147. http://www.samba.org/ 148. http://www.linux-france.com/article/presentation/presentation.html 149. ftp://ftp.lip6.fr/pub/linux/french/ldp/info-sheet.fr.html 150. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#CHOIX 151. http://www.cs.helsinki.fi/~torvalds/ 152. http://www.gnu.org/people/rms.html 153. http://www.tuxedo.org/~esr 154. http://kiev.wall.org/~larry 155. mailto:ask_tim@oreilly.com 156. http://www.apache.org/ 157. http://www5.zdnet.com/products/content/pcmg/1709/305867.html 158. http://www.samba.org/ 159. http://www.zdnet.com/sr/stories/news/0,4538,2196106,00.html 160. http://www.zdnet.fr/actu/busi/a0010161.html 161. http://gartner6.gartnerweb.com/dq/static/about/press/pr-b9939.html 162. http://www.netcraft.com/survey/ 163. http://www.leb.net/hzo/ioscount/index.html 164. http://www.apache.org/ 165. http://www.apache.org/ 166. http://www.landfield.com/wu-ftpd 167. http://www.isc.org/bind.html 168. http://www.sendmail.org/ 169. http://www.postfix.org/ 170. http://www.isc.org/inn.html 171. http://juanjox.linuxhq.com/ 172. http://www.rustcorp.com/linux/ipchains/ 173. http://www.openssh.com/ 174. http://squid.nlanr.net/Squid/ 175. http://www.eecis.udel.edu/~ntp 176. http://www.openldap.org/ 177. http://www.midgard.org/ 178. ftp://ftp.lip6.fr/pub/rfc 179. ftp://ftp.mathematik.th-darmstadt.de/pub/linux/okir 180. ftp://ftp.kernel.org/pub/linux/devel/gcc/ 181. http://www.coda.cs.cmu.edu/ 182. http://www.samba.org/ 183. http://www.compu-art.de/mars_nwe 184. http://www.umich.edu/~rsug/netatalk 185. http://www.irisa.fr/prive/mentre/smp-faq/ 186. http://hp-linux.cern.ch/ 187. http://cesdis.gsfc.nasa.gov/linux/drivers/index.html#gigabit 188. http://lhpca.univ-lyon1.fr/myri.html 189. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETRAID 190. http://www.hylafax.org/ 191. http://www.arkeia.com/ 192. http://www.postgreSQL.org/ 193. http://www.mysql.org/ 194. http://platforms.oracle.com/linux/index_lin.htm 195. ftp://ftp.netscape.com/pub/communicator/ 196. http://www.cc.ukans.edu/about_lynx/about_lynx.html 197. http://www.geocities.com/SiliconValley/6702/kmail.html 198. http://burka.netvision.net.il/xfmail/xfmail.html 199. http://www.mutt.org/ 200. ftp://ftp.uu.net/networking/mail/elm 201. http://www.adobe.com/supportservice/custsupport/LIBRARY/acrunix.htm 202. http://www.foolabs.com/xpdf/ 203. http://www.wizards.dupont.com/cristy/ImageMagick.html 204. http://www.gimp.org/ 205. http://www.real.com/products/player/downloadrealplayer.html?wp=dl0899&src=dlbutton_all%E2%8C%A9=en#form 206. http://www.lyx.org/ 207. http://www.latex-project.org/ 208. http://www.sgmltools.org/ 209. http://linux.corel.com/linuxproducts_wp8.htm 210. http://www.applix.com/applixware/linux/main.cfm 211. http://www.stardivision.com/office/so5linux_body.html 212. ftp://ftp.medasys-digital-systems.fr/pub/linux/sunsite/apps/sound/players/wavtools-1.3.2.tar.gz 213. http://www.ueda.info.waseda.ac.jp/%7Esatoshi/midi/midi-e.html 214. http://metalab.unc.edu/tkan/xmcd 215. http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html 216. http://sunsite.auc.dk/BurnIT/ 217. http://www.ge.ucl.ac.uk/~jcpearso/mkisofs.html 218. http://www.xiph.org/paranoia/ 219. http://www.winehq.com/ 220. http://www.ardi.com/ 221. http://www.calderasystems.com/doc/wabi/wabi.html 222. http://www.dosemu.org/ 223. http://www.gnu.org/software/gcc/gcc.html 224. http://www.gnu.org/software/gcc/gcc.html 225. http://agnes.dida.physik.uni-essen.de/~gnu-pascal/ 226. http://www.gnu.org/software/fortran/fortran.html 227. ftp://ftp.medasys-digital-systems.fr/pub/linux/sunsite/devel/lang/basic/qb2c-3.2k.tar.gz 228. http://www.scriptics.com/products/tcltk/ 229. http://www.perl.com/ 230. http://www.python.org/ 231. http://www.adahome.com/Resources/Compilers/GNAT.html 232. http://www.loria.fr/projets/SmallEiffel/ 233. http://clisp.cons.org/~haible/clisp.html 234. http://www.scheme.org/ 235. http://www.gnu.org/software/prolog/prolog.html 236. http://www.3ip.fr/pgD23.html 237. http://www.gnome.org/ 238. http://www.kde.org/ 239. http://www.opengroup.org/desktop/ 240. http://www.sgmltools.org/ 241. http://www.jclark.com/jade 242. http://www.oasis-open.org/docbook/ 243. http://www.redhat.com/ 244. http://www.medasys.fr/ 245. http://www.atrid.fr/ 246. http://www.alcove.fr/ 247. http://www.france.hp.com/formation 248. http://www.learningtree.com/fr/index.htm 249. http://form-continue.iut-velizy.uvsq.fr/ 250. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#REFERENCES 251. http://www.linuxdoc.org/ 252. http://www.traduc.org/ 253. http://www.editions-oreilly.fr/ 254. http://www.ssc.com/ 255. http://www.microsoft.com/HCL 256. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/Hardware-HOWTO.html 257. http://www.HyPer-Linux.org/HP-Howto/HP-HOWTO-FR/hp-hardware.html 258. http://www.voila.fr/ 259. http://www.deja.com/ 260. ftp://ftp.cdrom.com/ 261. http://www.redhat.com/ 262. http://www.suse.de/ 263. http://www.slackware.com/ 264. http://www.linux-mandrake.com/fr 265. http://www.turbolinux.com/ 266. http://www.debian.org/ 267. http://www.linux-france.com/article/these/unix-vs-nt/unix-vs-nt.html 268. http://www.hp.com/go/linux 269. mailto:Jacques_Misselis@hp.com 270. http://www.ec-lyon.fr/ 271. http://hpwww.ec-lyon.fr/hpeduc/education 272. http://www.medasys.fr/ 273. http://www.medasys.fr/linux 274. file://localhost/users/bruno/HP-Howto/mirror/white-paper.pdf 275. http://www.li.org/ 276. http://internetsolutions.enterprise.hp.com/linux/news/index.html 277. http://www.hp.com/communications/solutions/isp/tools/pressroom/releases/pr032999a.html 278. http://www.hp.com/pressrel/jan99/27jan99b.htm 279. http://www.hp.com/pressrel/jan99/27jan99.htm 280. http://www.hp.com/pressrel/mar99/01mar99e.htm 281. http://www.hp.com/pressrel/mar99/02mar99i.htm 282. http://www.hp.com/pressrel/mar99/17mar99e.htm 283. http://www.hp.com/pressrel/apr99/20apr99a.htm 284. http://www.openview.hp.com/solutions/itsm/press/press.asp?docid=314 285. http://www.businessservers.hp.com/falladvisor/sum99/Summer99/apache.html 286. http://www.hp.com/pressrel/jun99/21jun99g.htm 287. http://internetsolutions.enterprise.hp.com/linux/news/PRelease4.html 288. http://internetsolutions.enterprise.hp.com/linux/news/aberdeen_white_paper.html 289. http://www.hp.com/visualize/programs/news/archive/linuxvision.html 290. http://www.hp.com/pressrel/feb00/02feb00c.htm 291. http://www.hp.com/pressrel/feb00/02feb00b.htm 292. http://internetsolutions.enterprise.hp.com/linux/feb02page.html 293. http://www.hp.com/pressrel/jun00/13jun00a.htm 294. http://www.hp.com/pressrel/jul00/25jul00b.htm 295. http://www.hp.com/pressrel/aug00/14aug00.htm 296. http://www.linux.hp.com/news_events/press_releases/linux_chai.html 297. http://www.linux.hp.com/news_events/open_letter.html 298. http://www.hp.com/hpinfo/newsroom/press/21nov00b.htm 299. http://www.linux.hp.com/news_events/perens.html 300. http://netserver.hp.com/netserver/docs/download.asp?file=cs_solid.pdf 301. http://www.medasys.fr/ 302. http://hpwww.ec-lyon.fr/hpeduc/education/offre/linux/educ_linux.html 303. http://hpwww.ec-lyon.fr/hpeduc/education/offre/linux/hp_linux.html 304. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/Installation-HOWTO.html 305. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/Kernel-HOWTO.html 306. http://www.hp.com/desktops/linux/ 307. http://www.hp.com/pressrel/aug00/14aug00.htm 308. http://www.hp.com/desktops/linux/linuxfaq.html 309. http://www.support.vectra.hp.com/vectrasupport/indexes/Driver39.html 310. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 311. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 312. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 313. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 314. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 315. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#G100 316. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 317. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 318. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 319. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 320. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BAX 321. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 322. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 323. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BAX 324. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 325. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 326. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#I810 327. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 328. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#SAVAGE 329. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 330. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 331. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#SAVAGE 332. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 333. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 334. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 335. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 336. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 337. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 338. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 339. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 340. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 341. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 342. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 343. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 344. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 345. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3COM 346. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 347. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 348. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#G100 349. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 350. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 351. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 352. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#G100 353. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 354. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3COM 355. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 356. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 357. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 358. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 359. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 360. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 361. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3COM 362. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 363. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 364. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 365. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3COM 366. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 367. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 368. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 369. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 370. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#CL5465 371. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 372. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 373. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#CL5465 374. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 375. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 376. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#G100 377. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 378. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 379. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#G100 380. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 381. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3COM 382. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 383. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 384. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#G100 385. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 386. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3COM 387. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 388. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 389. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 390. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 391. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 392. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3COM 393. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 394. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 395. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 396. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3COM 397. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 398. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 399. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 400. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 401. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 402. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 403. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 404. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#COPER 405. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#I810 406. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 407. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 408. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 409. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#COPER 410. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 411. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 412. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#COPER 413. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 414. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 415. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 416. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#COPER 417. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 418. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 419. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#COPER 420. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 421. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 422. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 423. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#COPER 424. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 425. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 426. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 427. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#COPER 428. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 429. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 430. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#COPER 431. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 432. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 433. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#I850 434. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 435. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 436. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#I850 437. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 438. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 439. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 440. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 441. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 442. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 443. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#I810 444. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 445. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 446. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 447. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#I810 448. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 449. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 450. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 451. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#CL5465 452. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 453. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#CL5465 454. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 455. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#CL5465 456. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 457. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 458. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AD1816 459. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 460. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 461. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 462. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 463. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ELSA 464. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 465. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 466. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 467. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 468. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ELSA 469. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 470. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 471. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 472. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 473. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 474. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 475. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#G100 476. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 477. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 478. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#G100 479. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 480. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 481. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 482. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 483. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 484. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 485. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 486. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 487. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 488. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 489. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ELSA 490. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 491. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 492. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 493. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 494. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 495. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 496. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 497. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 498. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 499. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#G100 500. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 501. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 502. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 503. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 504. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 505. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 506. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 507. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AD1816 508. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 509. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 510. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 511. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 512. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 513. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MODDOS 514. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 515. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 516. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MODTBLINUX 517. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 518. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 519. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 520. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 521. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 522. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 523. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 524. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 525. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 526. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 527. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 528. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 529. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 530. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 531. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 532. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 533. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 534. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 535. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 536. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 537. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 538. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 539. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 540. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AD1816 541. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 542. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 543. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ELSA 544. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 545. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 546. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 547. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 548. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 549. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#G100 550. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 551. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 552. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 553. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 554. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XU800 555. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 556. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 557. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XU800 558. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 559. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 560. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XU800 561. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MODDOS 562. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 563. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 564. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 565. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XU800 566. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 567. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 568. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 569. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XU800 570. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 571. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 572. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 573. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XU800 574. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MODTBLINUX 575. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 576. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 577. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 578. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XU800 579. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 580. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 581. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 582. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XU800 583. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 584. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 585. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 586. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 587. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ELSA 588. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 589. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 590. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 591. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 592. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 593. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FX6 594. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 595. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 596. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 597. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 598. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FX6 599. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 600. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FX6 601. http://www.netroedge.com/~lm78 602. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 603. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ELSA 604. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 605. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 606. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 607. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AD1816 608. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 609. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 610. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 611. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 612. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AD1816 613. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 614. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 615. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 616. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FX10 617. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 618. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 619. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FX10 620. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 621. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 622. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 623. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ELSA 624. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 625. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MIXTE1 626. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 627. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AD1816 628. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 629. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 630. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 631. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FX10 632. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 633. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 634. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FX10 635. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 636. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 637. http://www.hp.com/workstations/products/linux/index.html 638. http://www.hp.com/visualize/programs/news/archive/qa1.html 639. http://www.hp.com/workstations/support/software/drivers/linux/video/fxvideo/fx6/driver.html? 640. http://www.hp.com/workstations/support/software/drivers/linux/video/fxvideo/fx10/index.html 641. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 642. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 643. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 644. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3COM 645. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 646. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C59X 647. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 648. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 649. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 650. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 651. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 652. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 653. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 654. http://www.bits.bris.ac.uk/madmatt/laptop.shtml 655. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XE 656. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LYNXE 657. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 658. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MAESTRO 659. http://www.linuxia.de/omnibook-xe2.en.html 660. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XE 661. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LYNXE 662. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 663. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MAESTRO 664. http://www.math.u-bordeaux.fr/~depouill/XE3/indexfr.html 665. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XE 666. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XE3 667. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#SAVAGE 668. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 669. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MAESTRO 670. http://www.math.u-bordeaux.fr/~depouill/XE3/indexfr.html 671. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XE 672. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XE3 673. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#SAVAGE 674. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 675. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MAESTRO 676. http://www.calodox.org/omnibook500/ 677. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 678. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 679. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ATIPORT 680. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MAESTRO 681. http://www.calodox.org/omnibook500/ 682. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 683. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 684. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ATIPORT 685. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C556 686. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MAESTRO 687. http://www.cs.hmc.edu/~fleck/iowa-lab/omnibook.html 688. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 689. http://mobilix.org/hp800e.html 690. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 691. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 692. http://people.ne.mediaone.net/dorscm/Linux/HP900install.html 693. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 694. http://www.hpl.hp.com/personal/Philippe_Bernadat/omni900/ 695. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 696. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 697. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ATIPORT 698. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MAESTRO 699. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 700. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 701. http://xenu.phys.uit.no/~tom/OmniBook3000CTX.html 702. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 703. http://mobilix.org/hp3100e.html 704. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 705. http://www.personal.psu.edu/users/a/x/axg189/linux/omni4000c.html 706. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 707. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 708. http://www.wien.netsurf.at/franz.fiala/omni4150.html 709. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 710. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 711. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 712. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ATIPORT 713. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MAESTRO 714. http://www.ens.fr/~dicosmo/Linux/OmniBook5000.html 715. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 716. http://foobar.starlab.net/~soggie/hp-omnibook-5500ct/ 717. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 718. http://www.best.com/~mcrosbie/Linux/ob5700.html 719. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 720. http://www.math.psu.edu/dna/omnibook6000-linux.html 721. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 722. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#FBDEV 723. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ATIPORT 724. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#C3C556 725. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MAESTRO 726. http://klee.cs.depaul.edu/ajeffrey/omnibook.html 727. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 728. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 729. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MAESTRO 730. http://www.netserver.hp.com/netserver/products/highlights_linux.asp 731. http://netserver.hp.com/netserver/support/compatibility/drvmatrx.htm 732. http://www.redhat.com/ 733. file://localhost/users/bruno/HP-Howto/mirror/netserver-rh5.2.pdf 734. file://localhost/users/bruno/HP-Howto/mirror/netserver-rh6.0.pdf 735. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 736. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 737. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 738. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 739. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 740. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 741. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 742. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 743. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 744. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 745. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#IDE1 746. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 747. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 748. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 749. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 750. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 751. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 752. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 753. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 754. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 755. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#COPER 756. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LC2000 757. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 758. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 759. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 760. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 761. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 762. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 763. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 764. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 765. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 766. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETRAID 767. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 768. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 769. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 770. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETRAID 771. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 772. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 773. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETRAID 774. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LH4 775. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#PROCS 776. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 777. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 778. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 779. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETRAID 780. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LH6000 781. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#PROCS 782. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 783. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 784. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 785. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 786. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LPXKR 787. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#IDE1 788. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 789. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 790. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LPXKR 791. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#IDE1 792. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MODRHLINUX 793. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 794. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 795. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LPXKR 796. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#IDE1 797. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#MODRHLINUX 798. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 799. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 800. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LPXKR 801. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#IDE1 802. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 803. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 804. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#CLUSTER 805. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 806. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 807. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#BX 808. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETRAID 809. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#LT6000 810. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#PROCS 811. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 812. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 813. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 814. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#PROCS 815. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 816. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 817. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#PROCS 818. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 819. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NCR53C8XX 820. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETRAID 821. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETRAID 822. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NRM 823. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETRAID 824. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NRM 825. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETRAID 826. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETRAID 827. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETRAID 828. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#NETRAID4M 829. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 830. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 831. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 832. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AIC7XXX 833. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/Hardware-HOWTO.html 834. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/Ethernet-HOWTO.html 835. http://www.xfree86.org/3.3.6/index.html 836. http://www.xfree86.org/cardlist.html 837. http://www.xig.com/ 838. http://www.metrolink.com/ 839. ftp://ftp.llp.fu-berlin.de/pub/linux/LINUX-LAB/IEEE488 840. ftp://ftp.medasys-digital-systems.fr/pub/unix/XFree86/3.3.6 841. http://www.staikos.on.ca/~staikos/tp1460/XFMa64-Rage-Thinkpad.patch 842. http://www.0wned.org/XFMa64-Rage-Thinkpad.tar.gz 843. http://www.elsa.de/EUROPE/PRODUCTS/CAD/SPECS/GLO_SYN.HTM 844. http://www.sgi.com/software/opengl 845. http://www.mesa3d.org/ 846. mailto:F.Dubuy@atrid.fr 847. mailto:a-m.mahfouf@lineone.net 848. mailto:Jean-Bernard_Chaffardon@hp.com 849. ftp://download.intel.com/support/graphics/intel815/xfcom_i810-1.2-3.i386.rpm 850. ftp://download.intel.com/support/graphics/intel810/xfcom_i810-1.2.patch.tar.gz 851. ftp://download.intel.com/support/graphics/intel815/i810gtt-0.2-4.src.rpm 852. ftp://download.intel.com/support/graphics/intel810/i810gtt-0.1-6.src.tar.gz 853. http://www.linux-france.org/article/x/GuideIntel810/book1.html 854. ftp://download.intel.com/support/graphics/intel815/release_linux.pdf 855. ftp://ftp.s3.com/pub/s3/desktop/395/395_xf86_1011.tar.gz 856. ftp://ftp.s3.com/pub/s3/desktop/390_391/390391_xf86_1011.txt 857. http://www.medasys-digital-systems.fr/linux/framebuffer.html 858. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/Framebuffer-HOWTO.html 859. http://people.redhat.com/dledford/aic7xxx.html 860. ftp://ftp.tux.org/pub/roudier 861. file://localhost/users/bruno/HP-Howto/mirror/ddsymrh62.img 862. file://localhost/users/bruno/HP-Howto/mirror/ddsymrh70.img 863. ftp://ftp.scyld.com/pub/network/3c59x.c 864. http://support.3com.com/infodeli/tools/nic/linuxdownload.htm 865. ftp://ftp.scyld.com/pub/network/test/3c59x.c 866. http://www.uow.edu.au/~andrewm/linux/#3c59x-bc 867. http://www.zabbo.net/maestro3/ 868. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#ALSA 869. http://www.opensound.com/ 870. http://www.zabbo.net/maestro/ 871. http://www.student.informatik.tu-darmstadt.de/~tek/projects/linux.html 872. http://www.hp.com/visualize/support/technotes/linux 873. http://www.alsa-project.org/ 874. http://hp-linux.org/aau/alsa 875. http://www.bits.bris.ac.uk/madmatt/laptop.shtml 876. ftp://pcmcia-cs.sourceforge.net/pub/pcmcia-cs/ 877. http://www.math.u-bordeaux.fr/~depouill/XE3/tulip.tar.gz 878. file://localhost/users/bruno/HP-Howto/mirror/ddsymrh62.img 879. file://localhost/users/bruno/HP-Howto/mirror/ddsymrh70.img 880. ftp://ftp.kernel.org/pub/linux/kernel 881. http://people.redhat.com/dledford 882. http://www.ami.com/ 883. file://localhost/users/bruno/HP-Howto/mirror/lh3.img 884. http://www.ami.com/support/prodsearch.cfm?InpProdID=17 885. ftp://ftp.medasys-digital-systems.fr/pub/linux/mds/tgz/1e08.zip 886. file://localhost/users/bruno/HP-Howto/mirror/ami-mr114b.tar.gz 887. file://localhost/users/bruno/HP-Howto/mirror/dd12mrh62.img 888. file://localhost/users/bruno/HP-Howto/mirror/dd12mrh70.img 889. http://domsch.com/linux 890. http://www.rsi.co.uk/products/rsf/rsf-linux.html 891. http://www.henge.com/~alanr/ha 892. ftp://ftp.kernel.org/pub/linux/kernel/people/sct/ext3 893. http://freshmeat.net/projects/hotkeys/ 894. http://www.thepuffingroup.com/ 895. http://www.parisc-linux.org/ 896. http://www.parisc-linux.org/faq.html 897. http://www.parisc-linux.org/hw.html 898. http://mkhppa1.esiee.fr/fr/ 899. http://www.parisc-linux.org/status.html 900. http://www.gr.opengroup.org/mklinux/hppa/mkpa-rel.html 901. http://parisc.workstations.org/ 902. ftp://ftp.kernel.org/pub/linux/kernel/ports/ia64 903. http://devresource.hp.com/devresource/Topics/IA64/IA64.html 904. http://www.hpl.hp.com/techreports/index.html 905. http://www.linuxia64.org/ 906. http://www.software.hp.com/ia64linux 907. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#XFREE86 908. http://rpmfind.net/ 909. http://www.cb3rob.net/~sven/xterm 910. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/mini/IP-Alias.html 911. http://www.samba.org/ 912. http://www.umich.edu/~rsug/netatalk 913. http://www.samba.org/ 914. http://www.samba.org/ 915. http://www.medasys-digital-systems.fr/linux/samba-truc.html 916. http://www.cs.wisc.edu/~ghost 917. http://www.cs.wisc.edu/~ghost/printer.html 918. http://www.linuxprinting.org/printer_list.cgi?make=HP 919. http://hp.sourceforge.net/ 920. http://hpinkjet.sourceforge.net/ 921. http://hpoj.sourceforge.net/suplist.shtml 922. http://www.mostang.com/sane 923. http://www.kirchgessner.net/sane.html 924. http://www.mostang.com/sane 925. ftp://rvs.ctrl-c.liu.se/pub/wingel/hpscan 926. http://www.mostang.com/sane 927. http://www.mostang.com/sane 928. http://www.mostang.com/sane 929. http://www.mostang.com/sane 930. http://www.mostang.com/sane 931. http://www.mostang.com/sane 932. http://www.mostang.com/sane 933. http://www.mostang.com/sane 934. http://www.torque.net/linux-pp.html 935. http://www.mostang.com/sane 936. http://www.jump.net/~dnelson/linux/usb 937. http://www.torque.net/linux-pp.html 938. http://www.mostang.com/sane 939. http://www.torque.net/parport/ppscsi.html 940. http://www.jump.net/~dnelson/linux/usb 941. http://www.mostang.com/sane 942. http://www.jump.net/~dnelson/linux/usb 943. http://www.mostang.com/sane 944. http://www.jump.net/~dnelson/linux/usb 945. http://www.torque.net/linux-pp.html 946. http://www.mostang.com/sane 947. http://www.torque.net/parport/ppscsi.html 948. http://www.jump.net/~dnelson/linux/usb 949. http://www.torque.net/linux-pp.html 950. http://www.mostang.com/sane 951. http://www.torque.net/parport/ppscsi.html 952. http://www.torque.net/linux-pp.html 953. http://www.mostang.com/sane 954. http://www.torque.net/parport/ppscsi.html 955. http://www.jump.net/~dnelson/linux/usb 956. http://www.torque.net/linux-pp.html 957. http://www.mostang.com/sane 958. http://www.torque.net/parport/ppscsi.html 959. http://www.jump.net/~dnelson/linux/usb 960. http://www.mostang.com/sane 961. http://www.mostang.com/sane 962. http://www.jump.net/~dnelson/linux/usb 963. http://www.mostang.com/sane 964. http://www.jump.net/~dnelson/linux/usb 965. http://www.mostang.com/sane 966. http://www.mostang.com/sane 967. http://www.kirchgessner.net/sanehpfaq.html 968. ftp://ftp.adobe.com/pub/adobe/acrobatreader/unix/4.x/linux-ar-405.tar.gz 969. http://www.aimnet.com/~derekn/xpdf/ 970. http://www.libtiff.org/ 971. http://www.linuxtapecert.org/ 972. http://mtx.sourceforge.net/ 973. http://www.arkeia.com/ 974. http://www.estinc.com/ 975. http://www.strusel007.de/linux/changer.html 976. http://www.firehunter.com/ 977. http://www.hp-eloquence.com/ 978. ftp://ftp.hp.com/pub/networking/software/hpwebjet_linux.selfx 979. http://www.hp.com/go/webjetadmin 980. http://www.hp.com/pond/wja/live/manual/html/wjacomp_linux.html 981. file://localhost/users/bruno/HP-Howto/mirror/hpwebjet-5.6-1.i386.rpm 982. http://www.hp.com/go/webqos 983. http://www.hp.com/storage/event/openview_hl.html 984. http://www.ice.hp.com/cyc/om/00/cysearch.cgi?pattern=100-1417|100-1408|100-1333|100-0100 985. http://www.e-speak.hp.com/ 986. http://www.unixsolutions.hp.com/products/ha/prod/ar/mcsg.html 987. http://resourcemanagement.unixsolutions.hp.com/WaRM/schedpolicy.html 988. http://hp-linux.org/toptools 989. http://www.cygnus.com/ 990. http://hpux.cict.fr/ 991. http://jazz.external.hp.com/src 992. http://www.aics-research.com/qcterm/ 993. http://www.hp.com/ssg/linux 994. http://www.hp.com/pressrel/apr99/20apr99a.htm 995. http://hp3.m0.net/m/s.asp?H1409133998X725229 996. http://hp3.m0.net/m/s.asp?H1409133998X725230 997. http://hp3.m0.net/m/s.asp?H1409133998X725231 998. http://www.medasys.fr/ 999. mailto:Sylvain.Berge@medasys.fr 1000. http://www.atrid.fr/ 1001. mailto:B.Deschandelliers@atrid.fr 1002. http://www.alcove.fr/ 1003. mailto:Lucien.Petit@alcove.fr 1004. http://education.hp.com/curr-linux.htm 1005. http://www.france.hp.com/formation/f_linux_00.html 1006. http://www.postfix.org/ 1007. http://www.apache.org/ 1008. http://www.agilent.com/ 1009. http://www.perl.org/ 1010. http://perl.oreilly.com/news/agilent_0300.html 1011. http://squid.nlanr.net/Squid/ 1012. http://www.hpl.hp.com/techreports/1999/HPL-1999-142.html 1013. http://www.openldap.org/ 1014. http://www.citrix.com/products/metaframe.asp 1015. http://www.citrix.com/ 1016. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#R2GO 1017. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5671 1018. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5678 1019. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#AEN5686 1020. http://humbolt.geo.uu.nl/Linux-MM/more_than_1GB.html 1021. http://www.irisa.fr/prive/mentre/smp-howto 1022. http://www.linux.org/help/beginner/year2000.html 1023. news:news.answers 1024. ftp://rtfm.mit.edu/ 1025. news:comp.os.linux.announce 1026. news:comp.sys.hp.hpux 1027. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/SCSI-HOWTO.html 1028. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/CD-Writing-HOWTO.html 1029. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/Hardware-HOWTO.html 1030. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/Distribution-HOWTO.html 1031. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/Kernel-HOWTO.html 1032. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/Sound-HOWTO.html 1033. http://www.medasys-digital-systems.fr/mirror/linux/french/ldp/HOWTO/PCMCIA-HOWTO.html 1034. http://mobilix.org/howtos.html 1035. http://www.linux-laptop.net/hp.html 1036. news:comp.sys.hp.hardware 1037. news:comp.sys.hp.misc 1038. file://localhost/users/bruno/HP-Howto/v0.93/HP-HOWTO-FR.html#SERVICE 1039. http://www.hp.com/go/linux 1040. http://www.hp-linux.org/ 1041. http://hpwww.ec-lyon.fr/hpeduc/education/offre/linux/educ_linux.html 1042. http://www.france.hp.com/clients/linux.html 1043. http://www.HyPer-Linux.org/HP-Howto/HP-HOWTO-FR/index.html 1044. http://thepuffingroup.com/parisc/software.html 1045. http://mkhppa1.esiee.fr/fr/ 1046. http://www.hpl.hp.com/research/comp_systems.html#Linux Technology 1047. http://www.linuxia64.org/ 1048. http://dtf.external.hp.com/dtf/swdev/1999/08/feature1_a.html 1049. http://bugzilla.redhat.com/certification/cert-report.php3?mod_company=Hewlett+Packard 1050. http://www.linuxcare.com/labs/certs/C1F5.epl 1051. http://www.hputigroup.com/ 1052. http://www.linuxdoc.org/ 1053. http://lwn.net/1999/features/1998timeline/ 1054. http://lwn.net/1999/features/Timeline/ 1055. http://www.leb.net/hzo/ioscount/index.html 1056. http://www.linux-france.com/article/these/unix-vs-nt/unix-vs-nt.html 1057. http://www.netcraft.com/survey/ 1058. http://www.aful.org/ 1059. http://www.april.org/ 1060. http://www.linux-center.org/ 1061. http://www.linux-france.com/ 1062. http://www.linuxjournal.com/ 1063. http://www.linuxgazette.com/ 1064. http://www.linuxmag-france.com/ 1065. http://fr.linuxstart.com/index.html 1066. http://linuxfr.org/news/ 1067. http://www.redhat.com/cgi-bin/support 1068. http://www.sourcexchange.com/ 1069. http://mobilix.org/ 1070. http://www.linuxmama.com/dev-server.html 1071. http://www.medasys-digital-systems.fr/linux 1072. mailto:angelini@ifsic.univ-rennes1.fr 1073. mailto:bhat@trinity.unimelb.edu.au 1074. mailto:j.ten.berge@getexo.nl 1075. mailto:Sylvain.Berge@medasys-digital-systems.fr 1076. mailto:bortzmeyer@debian.org 1077. mailto:bburns@wso.williams.edu 1078. mailto:Jean-Bernard_Chaffardon@hp.com 1079. mailto:chawoshi@subatech.in2p3.fr 1080. mailto:beatrice@victoria.frmug.org 1081. mailto:sebastien.cottalorda@mageos.com 1082. mailto:nug@sch.bme.hu 1083. mailto:Philippe.Depouilly@math.u-bordeaux.fr 1084. http://www.math.u-bordeaux.fr/~depouill 1085. mailto:ludovic_didierlaurent@hp.com 1086. mailto:F.Dubuy@atrid.fr 1087. mailto:mdwyer@alumbre-tech.com 1088. mailto:Stephane_Eranian@hp.com 1089. mailto:Mark_Eve@hp.com 1090. mailto:gferg@hoop.timonium.sgi.com 1091. mailto:laurent.frey@iota.u-psud.fr 1092. mailto:Bertrand.Gambier@medasys-digital-systems.fr 1093. mailto:stein.roar.gjoen@ks-t.no 1094. mailto:grundler@cup.hp.com 1095. mailto:jno@sasi.fr 1096. mailto:Yann_Guillemot@hp.com 1097. mailto:wehe@snafu.de 1098. mailto:Marc_Hia-Balie@hp.com 1099. mailto:theme@montana.com 1100. mailto:chris.holden@gte.net 1101. mailto:Masanari_Iida@hp.com 1102. mailto:Markus.Kuhn@cl.cam.ac.uk 1103. mailto:Pascal.Lemonnier@medasys.fr 1104. mailto:Maciej.Macowicz@epfl.ch 1105. mailto:Olivier_Martinet@hp.com 1106. mailto:madmatt@bits.bris.ac.uk 1107. http://www.bits.bris.ac.uk/madmatt/laptop.shtml 1108. mailto:mccluskey@nospam.mail.utexas.edu 1109. mailto:David.Mentre@irisa.fr 1110. mailto:Jacques.Misselis@hp.com 1111. mailto:A.Nierula@t-online.de 1112. mailto:Gilles_Noisette@hp.com 1113. mailto:HARRY_PAGE@HP-NewZealand-om1.om.hp.com 1114. mailto:Luis_Pais@hp.com 1115. mailto:pascal@montrouge.omnes.slb.com 1116. mailto:Luis_Peromarta@hp.com 1117. mailto:Daryl_Poe@hp.com 1118. mailto:Fons.Rademakers@cern.ch 1119. http://hp-linux.cern.ch/ 1120. mailto:laner@teleport.com 1121. mailto:reception@geo.co.za 1122. mailto:Eric_Rueda@hp.com 1123. mailto:Schutte@fel.tno.nl 1124. mailto:t.simonnet@esiee.fr 1125. mailto:support@ami.com 1126. mailto:Nicolas_Thomas@hp.com 1127. mailto:Dirk.DeWachter@rug.ac.be 1128. mailto:ndw@nwalsh.com 1129. http://www.gnu.org/copyleft/